En Installation Connection Settings Playback Installation Connection Settings Playback F Installation Connection When external devices such as a TV, BD/DVD player, and/or game console are connected, audio and video signals are transmitted as shown below. Surround sound TV stand YRS-2500 YRS-1500 Audio connection Video connection ■ Connecting a TV and BD/DVD player For the cable connection, follow the procedure below. See page 19 in the Owner’s Manual when connecting other playback devices such as a game console. Audio and video connection This unit: Plays audio from TV broadcasts, BD/DVD discs, etc. HDMI R AUX1 L AUX2 TV OPTICAL OUT (ARC) IN1 IN2 IN3 Install the unit in the center of the left and right walls. 3 Quick Reference Guide To an AC wall outlet English HDMI R This Quick Reference Guide provides instructions for connecting a TV and BD/DVD player to this unit, applying settings, and playing content. For more information on operations, refer to the Owner’s Manual. Read the safety instructions on page 2 in the Owner’s Manual before using this unit. For instructions on how to operate or set the external devices, refer to the owner’s manual supplied with each device. In this manual, the YRS-1500 is used for illustrative purposes. Before connecting, make sure you have received all of the following items. YRS-2500 Remote control YRS-1500 Batteries (AAA, R03, UM-4) (x2) Optical cable (1.5 m) IntelliBeam microphone (6 m) The rack must be assembled before it can be used. Refer to the Install Manual for a list of parts and assembly instructions. Cardboard microphone stand HDMI cable TV BD/DVD player This unit creates surround effects by reflecting sound beams off the walls of your listening room. The arrows in the diagrams on the right indicate the images of paths of 5-channel sound beams. To achieve desired surround sound effects, install this unit where there are no objects such as furniture obstructing the path of sound beams. Parallel installation HDMI cable Corner installation Optical cable Use to connect a TV that does not support audio return channel (ARC) to this unit. BD/DVD player 1. Objects, such as furniture 1 Front left channel 2 Center channel 4 Surround left channel 5 Surround right channel Objects, such as furniture HDMI cable (optional) Input the digital audio/video signals from the BD/DVD player to this unit. Optical cable 2. Video cable HDMI cable (optional) Digital video from the BD/DVD player is displayed on the TV. Satellite and cable TV tuner (not HDMI-compatible) To an AC wall outlet ZM27730 [En] IN2 IN3 1 BD/DVD player TV 1 2 HDMI INPUT 3 yTips Audio Return Channel (ARC) supported TV • Connect an HDMI cable to the audio return channel supported jack (the jack with “ARC” indicated) on TV. • Activate the HDMI control function of this unit so as to activate the Audio Return Channel (ARC). See page 29 in the Owner’s Manual. What is Audio Return Channel (ARC)? A function transmits digital audio signal output from TV to this unit through an HDMI cable. By this function, an optical cable to connect TV and this unit is not needed. TV: Plays video from TV broadcasts, BD/DVD player, etc. 3 Front right channel • Do not connect the power cable until all connections are completed. • Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or jack. ■ Preparing remote control ■ Handling cables Installing the batteries Operation range Battery × 2 (supplied) (AAA, R03, UM-4) When placing playback devices on the rack, remove the center rear panel and connect the playback devices. Run cables through the indented portion of the rack, and reattach the center rear panel after all devices are connected. If longer cables are used, excess portions can be stored in the space between the center rear panel and this unit. Press down on the arrow and slide the cover in the direction in which it points. Within 6 m Slide the cover back to close it. Printed in Indonesia IN1 HDMI OUTPUT OPTICAL OUTPUT Audio signals Game console (HDMI-compatible) Center rear panel © 2014 Yamaha Corporation OUT (ARC) Audio from TV broadcast (TVs that support Audio Return Channel (ARC)) 40° to 50° Example for installing the unit in living room • As sound beams normally pass through tables, tables are not obstacles. And a cupboard installed facing the wall reflects sounds. • In a case of the listening room as shown in the illustration on the right, adjusting the position of the right channel after AUTO SETUP (as shown in “Carrying out AUTO SETUP for appropriate surround effects” in this Quick Reference Guide) enables to achieve more desired surround sound effects. See page 48 in Owner's Manual. • As the curtains absorb sounds, the sound features of the listening room is different from the case with the curtain opened and the case with the curtain closed. Using saving settings function enables to save the best settings for each case of listening room. See page 40 in Owner's Manual. HDMI cables (x2) OPTICAL Video signals Install Manual Devices and cables required for connection The following items are not supplied with this unit. TV Use an optical cable when connecting a TV that does not support Audio Return Channel. 2. Check the direction of the plug Objects, such as furniture Quick Reference Guide (this booklet) AUX2 2 HDMI cable 3. Owner’s Manual L 1. Remove the cap • The listening position (such as sofa, etc.) should be located at the front of the unit. • The distance between the listening position and the unit should be more than 1.8 m. Supplied accessories AUX1 Installation Connection Settings Playback Installation Carrying out AUTO SETUP for appropriate surround effects 5. Place the IntelliBeam microphone at your normal listening position. Assemble the cardboard microphone stand and place the IntelliBeam microphone on top of it horizontally as shown below. 1 2 3 4 Confirm that this unit and other devices are properly connected by playing a DVD or BD on the BD/DVD player. The following explains the playback procedure when this unit, TV, and BD/DVD player are connected as shown in “Connecting a TV and BD/DVD player” in this Quick Reference Guide. Make sure that your listening room is as quiet as possible. For accurate measurement, turn off air conditioner or other devices that make noises. 1. 5 Fit in 1 3 2. Turn on your TV and BD/DVD player connected to this unit. 3. Press the HDMI1 key to select the BD/DVD player as the input source. Fit in 6. Use the supplied cardboard microphone stand to place the IntelliBeam microphone at the same height as your ears would be when you are seated. Make sure that there are no obstacles between the IntelliBeam microphone and the walls in your listening room as these objects obstruct the path of sound beams. • The results displayed depend on the position of the unit. • If you hear a buzzer sound and an error message appears on the TV, look for a solution in “If an error message is displayed” on page 28 in the Owner’s Manual. Within 1 m Within 1 m Center line Listening position IntelliBeam microphone 3. Glows green 7. Press the ENTER key. The measurement results are applied and saved in the unit. • You can save several measurement results by pressing the SYSTEM MEMORY 1, 2, or 3 key. See page 40 in the Owner’s Manual. When the SYSTEM MEMORY 1 key is pressed, “M1 Saving” is displayed, and settings are saved. • If ambient noise is picked up after measurement begins, an error message is displayed in the “AUTO SETUP COMPLETE” screen prompting you to begin measurement again. Press the ENTER key to begin measurement again. yTip You can select the language for the menu display. Press and hold the SETUP ( ) key until the “OSD LANGUAGE” menu appears. Press the S/T key to select the desired language. Press the SETUP ( ) key again to exit the setup menu. Connect the IntelliBeam microphone to the INTELLIBEAM MIC jack on the rear of the unit. 8. IntelliBeam microphone (supplied) Cardboard microphone stand (supplied) AUTO SETUP (PREPARATION & CHECK) Please connect the MIC. Please place the MIC at least 1.8m/6ft away from Sound Projector. The MIC should be set at ear level when seated. Measurement takes about 3min. After [ENTER] is pressed, please leave the room. [ENTER]:Start [RETURN]:Cancel Remove the IntelliBeam microphone. The IntelliBeam microphone is sensitive to heat, so should not be placed anywhere where it could be exposed to direct sunlight or high temperatures (such as on top of AV equipment). Press the key on the remote control. begin Please in leave BLUETOOTH START 10 the HDMI1 sec. Input source name 2. room. ---------- 6 4. Switch the TV’s input to HDMI 1. 5. Play back a DVD or BD on the BD/DVD player. 6. Press the VOL (+/-) key to adjust the volume. Turn on the Bluetooth device to be paired, and perform pairing. The operation varies depending on the device. Refer to the operation manual of the device. yTips [RETURN]:Cancel • Perform pairing with the Bluetooth device and unit within 10 m of each other. • Pairing is required for connecting a Bluetooth device for the first time. (After 3 min.) SHOW 3. RESULT MEASUREMENT 7. COMPLETE. 7 ENVIRONMENT CHECK:Success BEAM MODE:5Beam/Plus2 Press the CINEMA DSP keys to set your sound preferences. See page 32 in the Owner’s Manual. When this unit does not play back, check the following • The connection between this unit and BD/DVD player. • The audio output settings of the BD/DVD player is set to digital sound output (bitstream). • The TV’s input is switched to this unit. Turn the TV on and switch the TV’s input to display video content from this unit. When this unit is connected to the HDMI input on the TV (as shown in “Connecting a TV and BD/DVD player” in this Quick Reference Guide), switch the TV’s input to “HDMI1”. 4. Will SETUP [ENTER]:Save set-up. [RETURN]:Do not save set-up. Lower limit Press the z key to turn on this unit. 1. AUTO SETUP Select “YRS-2500 Yamaha” or “YRS-1500 Yamaha” in the Bluetooth device list on the device. If a passkey (PIN) is required, enter the number “0000”. When pairing is completed, or a completion message appears on the Bluetooth device. yTips Cardboard microphone stand 2. AUTO yTips Center height of this unit 1.8 m or more Press the ENTER key to start the AUTO SETUP procedure and then leave the room within 10 seconds. The screen automatically changes during the AUTO SETUP procedure. If the AUTO SETUP procedure is complete, this unit rings the chimes and the results will be displayed on the TV. Upper limit Cardboard microphone stand Press the z key to turn on this unit. You can listen to the wireless sound from a Bluetooth device, such as a smartphone or digital music player. See also the instructions manual of the Bluetooth device for more information. “Bluetooth” is selected as the input. Follow the instructions below and then leave the room. If you remain in the room, you may obstruct the beam, or the microphone may pick up any sounds you make, possibly resulting in improper configuration of settings. When leaving the room, bring this Quick Reference Guide with you. The AUTO SETUP procedure takes about 3 minutes. Wait outside the room during the AUTO SETUP procedure. To cancel the AUTO SETUP procedure after it is started, press the RETURN ( ) key on the remote control. Run through Remove Playback ■ Listening to the sound from a Bluetooth device Note Place horizontally IntelliBeam microphone Settings Playing back The IntelliBeam technology allows you to achieve sound adjustments that best match your listening environment. It is normal for loud test tones to be output during the AUTO SETUP procedure. Make sure that there are no children around in the listening room while the AUTO SETUP procedure is in progress. 1. Connection 4. PIN 0 0 0 0 YRS-1500 Yamaha 1 4 7 2 5 8 0 3 6 9 Play back a song on the Bluetooth device. “BLUETOOTH”, or the name of the connected device, is displayed in the front panel display. “_” is displayed for non-alphanumeric characters in the device name. COMPLETE Please remove the MIC from Sound Projector and the listening position. Press [SYSTEM MEMORY] to save set-up in the key memory. ■ Enjoying TV 1. Select the desired TV channel. 2. Press the TV key. ■ HOME THEATER CONTROLLER app for smartphones and tablets yTips • When audio is output from the TV speaker, set TV’s audio output to any option other than TV. See the instructions manual of TV for more information. • HDMI control function You can use the TV remote control to operate this unit if your TV supports the HDMI control function. See page 29 in the Owner’s Manual. HOME THEATER CONTROLLER, a dedicated control app for Yamaha Home Theater components, enables basic operation of this unit, including the ability to turn it off, switch between input sources, adjust volume, and select a sound program, using a smartphone or tablet. • The following devices support this app. - iPod touch (4th generation or later) running iOS 5.1.1 or later - iPhone 3GS or later devices running iOS 5.1.1 or later - iPad running iOS 5.1.1 or later - Android (version 2.3.3 or later) devices • This app uses Bluetooth wireless communication. • Search “HOME THEATER CONTROLLER” on Apple’s App Store or Google Play’s website to download the app or obtain the latest information on the app. • Android is a trademark of Google Inc. • iPad, iPhone, iPod, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. For detailed operation, refer to the Owner’s Manual.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021