Thermador | PH36GS | Download Design Guide | Thermador PH36HS Download Design Guide

132
MODELS SHOWN: HPCB48NS 48-INCH PROFESSIONAL SERIES CHIMNEY WALL HOOD AND PRD486JDGU 48-INCH PROFESSIONAL
SERIES PRO GRAND® DUAL-FUEL RANGE
VENTILATION
VENTILATION
PROFESSIONAL ®
& MASTERPIECE
SERIES
No need to worry about lingering odors or smoke with our elegant, powerful ventilation systems, featuring design
accents that complement our Professional Series or our Masterpiece® Collection. These sophisticated ventilation systems
remove smoke, grease and unhealthy airborne contaminants. From standard wall to specialty hoods, downdrafts, island
and custom inserts, each model has one thing in common: legendary Thermador performance. These powerful, quiet
systems tackle unwanted smoke, grease, heat and odors — quietly and efficiently — with ventilation power ranging from
600 to 1,300 CFM.
1.800.735.4328 | THERMADOR.COM
133
RANGE, RANGETOP AND VENTILATION MATRIX
PROFESSIONAL SERIES
= PERFECT FIT
= VIABLE OPTION
36-INCH
PRO GRAND
48-INCH
PRO GRAND
48-INCH
PRO GRAND STEAM
27-INCH DEPTH
36" PH36GS
42" PH42GS
27-INCH DEPTH, 18-INCH TALL
WALL HOODS
48" PH48GS
54" PH54GS
30" PH30HS
36" PH36HS
24-INCH DEPTH, 18-INCH TALL
WALL HOODS
48" PH48HS
30" HPWB30FS
24-INCH DEPTH, 11-INCH TALL
WALL HOODS
36" HPWB36FS
48" HPWB48FS
36" HPCN36NS / HPCB36NS
24-INCH DEPTH CHIMNEY
WALL HOODS
48" HPCN48NS / HPCB48NS
42" HPIN42HS
ISLAND HOODS
48" HPIN48HS
36" VCIN36JP / 36" VCIB36JP
48" VCIN48JP / 48" VCIB48JP
CUSTOM INSERTS
54" VCIN54JP / 54" VCIB54JP
For optimal performance, the width of the hood should equal that of the cooktop or rangetop or exceed it by 3 inches on either side. Install these hoods only with Thermador Blowers.
134
VENTILATION
30-INCH
PRO HARMONY
36-INCH
PRO HARMONY
24-INCH DEPTH
1.800.735.4328 | THERMADOR.COM
48-INCH
PRO HARMONY
30-INCH
RANGETOP
36-INCH
RANGETOP
48-INCH
RANGETOP
24-INCH DEPTH
135
COOKTOP AND VENTILATION MATRIX
MASTERPIECE® SERIES
= PERFECT FIT
= VIABLE OPTION
30-INCH
INDUCTION
36-INCH
INDUCTION /
FREEDOM®
INDUCTION
30-INCH
GAS COOKTOP
36-INCH
GAS COOKTOP
30" HMWN30FS
WALL HOODS
48" HMWN48FS
30" HMWB30FS
WALL HOODS
WITH BLOWER
36" HMWB36FS
36" HMCN36FS
CHIMNEY WALL HOODS
42" HMCN42FS
36" HMCB36FS
CHIMNEY WALL HOODS
WITH BLOWER
DRAWER HOOD
WITH BLOWER
42" HMCB42FS
36" HDDW36FS
40" HMIB40HS
42" HPIB42HS
ISLAND HOODS
WITH BLOWER
48" HPIB48HS*
30" VCI230DS†
36" VCI236DS†
CUSTOM INSERTS
48" VCI248DS †
30" UCVM30FS
DOWNDRAFTS
36" UCVM36FS
For optimal performance, the width of the hood should equal that of the cooktop or rangetop or exceed it by 3 inches on either side. Install these hoods only with Thermador Blowers.
*Compatible with cooktops of widths up to 42"
†Also compatible with Pro Grand Ranges, Pro Harmony Ranges and Professional Rangetops.
136
VENTILATION
30-INCH
ELECTRIC COOKTOP
30-INCH SENSOR
ELECTRIC COOKTOP
1.800.735.4328 | THERMADOR.COM
36-INCH
ELECTRIC COOKTOP
36-INCH SENSOR
ELECTRIC COOKTOP
137
PH_GS
WALL
HOODS
36" / 42" / 48" / 54"
HPWB_FS
PH_HS
CHIMNEY WALL
HOODS
ISLAND
HOODS
CUSTOM INSERTS
30"
36" / 48"
30" / 36" / 48"
HPCN_NS
36" / 48"
HPCB_NS
36" / 48"
HPIN_HS
42" / 48"
VCIB_JP
36" / 48" / 54"
VCIN_JP
36" / 48" / 54"
600
1000
600
1000
1300
600
1000
600
1200
600
1000
1300
600
1000
600
1000
600
1000
1300
600
1000
1000
600
1000
1300
600
1000
1000
600
1000
1300
600
1000
600
1000
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
.
VTN630N
VTN1030N
VTR630D
VTR1030D
VTR1330E
VTI610D
VTI1010D
Included
Included
VTR630D
VTR1030D
VTR1330E
VTI610D
VTI1010D
VTN630N
VTN1030N
VTR630D
VTR1030D
VTR1330E
VTI610D
VTI1010D
VTN1080N
VTR630D
VTR1030D
VTR1330E
VTI610D
VTI1010D
Included
VTR630D
VTR1030D
VTR1330E
VTI610D
VTI1010D
VTN630N
VTN1030N
Tota
l
120 Amps
@
Volt
s, 60
Hz
•
•
Mod
el N
o
ated
Inte
gr
Inlin
e
Available
Sizes (Widths)
Model No.
Type
Rem
ote
Type
B l ow
er In
form
atio
n
CFM
BLOWER SELECTION
AND DUCT GUIDE
PROFESSIONAL SERIES
10.3
13.6
12.1
14.0
17.5
12.1
14.0
3.4
10.2
6.9
8.8
12.3
6.9
8.8
5.0
8.4
6.9
8.8
12.3
6.9
8.8
12.7
Max 10
Amps
12.7
6.9
8.8
12.3
6.9
8.8
10.3
13.6
MASTERPIECE® SERIES
30"
WALL
HOODS
HMWN_FS
48"
CHIMNEY
WALL HOODS
ISLAND HOODS
CUSTOM INSERTS
DOWNDRAFT
HMWB_FS
30" / 36"
HMCN_FS
36" / 42"
HMCB_FS
HDDW36FS
HMIB40HS
HPIB_HS
36" / 42"
36"
40"
42" / 48"
VCI2_DS
30" / 36" / 48"
UCVM_FS
30" / 36"
600
600
1000
600
1000
600
1000
600
1000
1300
600
1000
600
1000
600
1000
1300
600
1000
600
600
400
600
600
1000
1300
600
1000
600
600
1000
600
1000
*Purchase separately at most hardware stores, unless otherwise indicated with a Thermador model number.
138
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VTN600F
VTR630D
VTR1030D
VTI610D
VTI1010D
VTN600F
VTN1000F
VTR630D
VTR1030D
VTR1330E
VTI610D
VTI1010D
Included
VTN1080N
VTR630D
VTR1030D
VTR1330E
VTI610D
VTI1010D
Included
Included
Included
Included
VTR630D
VTR1030D
VTR1330E
VTI610D
VTI1010D
VTN600CV2C
VTR630D
VTR1030D
VTI610D
VTI1010D
4.6
4.3
7.8
5.8
7.6
4.6
8.8
4.3
7.8
9.2
5.8
7.6
3.4
5.0
6.7
7.8
9.2
5.8
7.6
4.9
4.9
5.2
5.2
5.2
7.8
9.5
5.8
7.6
6.7
6.7
10.2
5.8
7.6
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1.800.735.4328 | THERMADOR.COM
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
CV2T6
CV2T10
CV2T6
CV2T10
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Reci
r
Cap culation
abili
ty
&D
Side
Hori
zo
ical
Vert
10-In
ch
6-In
ch
uire
d
Req
ed
8-In
ch
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
own
Discharge Direction
*
Duct Size at Discharge
ntal
Transition with
Backdraft Damper
Inclu
d
Hoo
d
Info
rma
ti o n
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
10-In
ch
8-In
ch
6-In
ch
RFP
LT10
00
RFP
LT60
0
•
Duct Size at Blower
VENTILATION
Roofplate Required
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
139
BLOWER OPTIONS AND PRESSURE CURVES
INTEGRATED (MOUNTED IN HOOD)
140
VTN600CV2C – 600 CFM
VTN600F – 600 CFM
VTN630N– 600 CFM
VTN1080N– 1000 CFM
VTN1000F – 1000 CFM
VTN1030N– 1000 CFM
REMOTE (MOUNTED TO ROOF OR EXTERNAL WALL)
VTR630D – 600 CFM
VTR1030D – 1000 CFM
VTR1330E – 1300 CFM
VENTILATION
BLOWER OPTIONS AND PRESSURE CURVES
INLINE (MOUNTED BETWEEN KITCHEN AND EXTERNAL WALL)
VTI610D – 600 CFM
VTI1010D – 1000 CFM
NOTE: All measurements are
made with 3 ft. straight duct,
90° bend followed by 1 ft.
straight duct. These are NOT
free blowing measurements.
1.800.735.4328 | THERMADOR.COM
141
EQUIVALENT DUCT LENGTHS FOR COMMONLY
USED TRANSITIONS
SIZE OF DUCT EQUIVALENT
PIECE (IN.)
LENGTH (FT.)
DUCT PIECE
Smooth
Straight
1.2
7
0.95
8
0.7
10
0.6
3 1/4" x 10"
to Round
90° Elbow
6
10
7
5
3 1/4" x 10"
Center Reverse
Elbow Left
N/A
15
N/A
25
3 1/4" x 10"
Straight
N/A
1
3 1/4" x 10"
Center Reverse
Elbow Right
3 1/4" x 14"
Straight
N/A
0.7
3 1/4" x 10" Left
Reverse Elbow
N/A
15
6
12
N/A
25
7
8
3 1/4" x 10"
Right Reverse
Elbow
8
6
6
2
6
5
7
2
7
4
8
2
8
3
10
2
6
2
7
2
8
2
2' Long
3 1/4" x 10"
Flex
N/A
20
3 1/4" x 10"
to Round
10
1
7" Inline
Backdraft
Damper
7
90° Elbow
Round
45° Elbow
Round
3 1/4" x 10"
90° Elbow
Round
N/A
5
3 1/4" x 10"
45° Elbow
Round
N/A
15
1/4"
3
x 10"
Flat Elbow
Round to
3 1/4" x 10"
3 1/4" x 10"
to Round
Round to
3 1/4" x 10"
90° Elbow
142
6
SIZE OF DUCT EQUIVALENT
PIECE (IN.)
LENGTH (FT.)
DUCT PIECE
N/A
Round
Wall Cap
Round
Roof Cap
20
6
1
7
1
6
5
7
3
6
10
7
8
3 1/4" x 10"
Roof Jack
and Shutter
N/A
NOTE: These commonly used installation parts can be purchased
at a local hardware store. Thermador does not manufacture all
these parts.
When selecting a ventilation system, choose from one of our two sophisticated appliance collections. Select Professional Series for the ultimate
in cooking and venting power or the Masterpiece Series for its sleek styling and numerous convenience functions.
VENTILATION
VENTILATION
HOODS THAT FIT WITH YOUR KITCHEN
WALL HOODS
Wall hoods offer exceptional, quiet performance and distinctive design options.
• Efficient, high quality, all stainless steel filters
• Halogen lighting
• Deep enclosure area for excellent capture
• Removable dishwasher-safe grease collection tray
• Recirculation option at 600 CFM
CHIMNEY WALL HOODS
Our chimney style wall hoods create a dramatic focal point in the kitchen.
• Adjustable chimney heights suit a range of ceilings
• All stainless steel or stainless steel with glass designs available
• Halogen lighting
• Dishwasher-safe, stainless steel frame filters
• Automatic Clean Filter Reminder light
ISLAND HOODS
Thermador Island Hoods offer excellent overall efficiency in drawing away smoke, moisture and heat.
• An option for when a wall surface is not available
• Dishwasher-safe, stainless steel filters
• Slim and sleek design that does not obstruct the views beyond your kitchen
• Halogen lighting
• All stainless steel or stainless steel with elegant glass canopy design
CUSTOM INSERTS
To create a seamless design with wall or island applications, use custom hood inserts.
• Available options for all types of cooking surfaces
• User-friendly ventilation controls or remote control options
• Wall or island applications
• Halogen lighting
DOWNDRAFTS
Downdraft ventilation offers space efficiency and a sleek look for non-professional cooktops.
• Over 13-inch intake
• Full-face filter combines a filter with splatter shield in one easy-to-remove, dishwasher-safe element
• Ideal in island applications
• 600 CFM recirculation kit option with integrated blower is available for difficult-to-duct situations
1.800.735.4328 | THERMADOR.COM
143
144
MODELS SHOWN: PH48HS WALL HOOD AND PRG486GDH PRO HARMONY RANGE AND PA12CVRJ GRIDDLE
COVER ACCESSORY
VENTILATION — WALL HOODS
VENTILATION
WALL
HOODS
Thermador Wall Hoods put the finishing touch on your cooking system, with deep capture areas for
the best overall efficiency in drawing away smoke, moisture and heat. These elegant hoods combine
style with vigorous performance, generating ventilation power from 600 to 1,300 CFM. Available
in a variety of heights, widths and depths, they accommodate your individual venting needs. All
models include brilliant halogen lighting for enhanced visibility and convenient speed controls. For
ultra-simple cleanup, the removable filters and grease collection trays fit easily in your dishwasher.
1.800.735.4328 | THERMADOR.COM
145
WALL HOODS
FEATURES & BENEFITS
HALOGEN LIGHTS
Bright halogen lighting spotlights your best recipes.
DELAYED SHUT-OFF
For the greatest efficiency, our Professional ventilation
models include delayed shut-off to tackle lingering odors.
(Except HMWB30FS, HMWB36FS)
POWERFUL VENTILATION
Breathe deeply with the air-freshening power of up to 1,300 CFM.
Our HPWB Series Professional Hood now has blower included for
ease of installation.
TIME-TO-CLEAN-FILTER LIGHT
Easy cleanup: all Thermador ventilation filters are dishwasher-safe,
and many hoods feature a built-in Time-to-Clean-Filter reminder
light. (Except HMWB30FS, HMWB36FS)
BAFFLE FILTERS
Unique low-profile, commercial-style
baffle filters maximize grease capture
without affecting flow, and they’re
dishwasher-safe for easy cleanup.
EXTERIOR CONTROLS
Easy-to-clean, easy-to-use pushbutton controls put accuracy at
your fingertips.
PLANNING INFORMATION
MODEL OPTIONS
When selecting a ventilation system, choose from one of our two
sophisticated appliance collections. Select Professional Series for
the ultimate in cooking and venting power or the Masterpiece
Series for its sleek styling and numerous convenience functions.
Thermador Wall Hoods are available in various depths and
heights to fit your kitchen plans and are meticulously crafted for
both function and design. Be sure to reference the correct model
information in this design guide.
ELECTRICAL SPECIFICATIONS
Be sure your Thermador Wall Hood is properly installed and
grounded by a qualified technician. Installation, electrical
connections and grounding must comply with all applicable
local codes.
Install a suitable conduit box (not furnished). An appropriatelysized, UL-listed conduit connector must be used to correctly
attach the conduit to the junction box. Remote blowers require
a 5-wire installation.
KEEP-HOT SHELF
Hold dishes at serving temperature
on our optional Keep-Hot Shelf.
(Perfect for PH36GS, PH42GS, and
PH48GS)
146
MODEL
REQUIRED
CIRCUIT BREAKER
120V AC, 60 Hz
PH36GS, PH42GS, PH48GS,
PH54GS
15 or 20 Amp
PH30HS, PH36HS, PH48HS
15 or 20 Amp
HPWB30FS, HPWB36FS,
HPWB48FS
15 or 20 Amp
HMWN30FS, HMWN48FS
15 or 20 Amp
HMWB30FS, HMWB36FS
15 or 20 Amp
INSTALLATION CONSIDERATIONS
The information in this design guide provides key
features, product dimensions, cutouts and installation
specifications. Before installing a Thermador Wall
Hood, be sure to verify the cutout dimensions and
electrical connections. Also, always consult with
the installation manual packed with the product for
complete details before installing.
Thermador Wall Hoods may be installed above a
Thermador Cooktop or Range to create a convenient
cooking center. Refer to the appropriate section for
additional specifications.
HOOD WIDTH
The hood width should be no less than the width of
the cooking surface. Where space is not restricted, a
wider hood can be used to increase your capture area.
DISTANCE FROM COOKING SURFACE
Remote Blowers (VTR Series)
Depending on your preference and ducting situation, these blowers can be
mounted on the roof or exterior wall of your home. An exterior installation
may be more appealing to reduce noise in the kitchen.
Inline Blowers (VTI series)
To minimize noise in the kitchen, these blowers are mounted along the
duct line anywhere between the kitchen and the exterior wall. If you have
easy access to your duct line (in an attic, for example), this may be an
appealing option.
Integrated Blowers (VTN series)
These blowers are purchased separately and integrated into the hood or
onto the downdraft unit at the time of installation. This option allows you to
select your ideal hood with the exact power you require. Integrated blowers
are included with HPWB30FS, HPWB36FS and HPWB48FS.
CHOOSING THE RIGHT CFM
The power of the cooktop or range, measured in BTU, is perhaps the most
important factor in determining CFM needs for a hood.
Proper mounting height is very important. If a hood
is mounted too low, it may be difficult to cook and be
unsafe. If a hood is mounted too high, performance
may be compromised. For optimal performance, the
distance from the cooking surface to the bottom of the
hood should be a minimum of 30", unless otherwise
noted. Please refer to the installation manual for each
hood and cooktop / range model for proper hood
mounting heights.
You should also consider the cooking space and cooking style of your client.
AVAILABLE CEILING HEIGHT
• If the cooking surface is in a peninsula or island, a larger capacity hood can
provide better capture when there are cross currents and when the hood
needs to be mounted higher. Downdraft ventilation systems are also a good
alternative.
The standard ceiling height can vary from region to
region and in homes built in different eras. Ceiling
heights, even in the same room, can sometimes vary
by as much as several inches. Kitchen ceiling heights
can vary between 7'6" (or 90") to over 10' (or 120").
Before selecting a Thermador Hood, check the
available installation space and any extra space that
may remain after proper installation of a hood and
cooktop or range. This extra space can be filled using
Thermador’s stainless steel duct cover accessories or
integrated with kitchen cabinetry. The space can also
be adjusted by raising or lowering your hood within
the recommended range (typically 30" to 36" above
the cooking surface).
CHOOSING THE CORRECT BLOWER
A variety of interior and exterior blower options
(Remote, Inline or Integrated) are available for
Thermador’s Professional and Masterpiece Series
Hoods. If the unit you have selected does not have
a blower, one can be purchased separately. Blower
selection will vary based on the volume of air that
needs to be moved and the length and location of the
duct run. For long duct runs with multiple turns and
bends, consider using a more powerful blower. For the
most efficient air flow exhaust, use a straight run or as
few elbows as possible.
VENTILATION — WALL HOODS
WALL HOODS
PLANNING INFORMATION
• More demanding cooks usually require more exhaust capacity to handle
moisture generated by boiling large pots of water or the grease and smoke
resulting from grilling or frying. This cooking style could require a hood or
downdraft system with airflow of 600 to 1,300 CFM.
• For those who are used to preparing quick meals in a relatively small
kitchen, a hood with 600 CFM may be adequate ventilation for the
cooking space.
• High heat cooking or aromatic foods may require additional CFM.
Increasing capture area by 3" on each side is also a recommended way to
address this issue.
LENGTH AND SIZE OF DUCTWORK
Do not use flexible duct; it creates back pressure / air turbulence and reduces
performance.
Straight runs and gradual turns are best. Use the shortest route with the
fewest turns possible.
Proper performance is dependent upon proper ducting. Use a qualified and
trained installer. Local building codes may require the use of make-up air
systems when using ducted ventilation systems greater than specified CFM of
air movement. The specified CFM varies from locale to locale. Consult your
HVAC professional for specific requirements in your area.
If using a 10" duct, Thermador recommends not exceeding 50 feet of duct.
Transitions, elbows and wall or roof caps are all factors that will add more
static pressure, therefore increasing your equivalent duct run.
WARRANTY
Limited warranty parts and labor (2 year)
See page 310 for additional warranty details.
1.800.735.4328 | THERMADOR.COM
147
VENTILATION
27-INCH DEPTH WALL HOOD (36"/42"/48"/54")
PH36GS / PH42GS / PH48GS / PH54GS
PH36GS / PH42GS / PH48GS / PH54GS
PERFORMANCE
PROFESSIONAL
PH36GS – 36-Inch
PH42GS – 42-Inch
PH48GS – 48-Inch
PH54GS – 54-Inch
SPECIFICATIONS
Available Hood Widths
36" / 42" / 48" / 54"
UL Approved for Damp
Environments
Yes
Blower
Sold Separately – See
Blower Options Table
Duct Size at Discharge
10" Round
Ducting Direction
Vertical or Horizontal
Dishwasher-safe Filters
Commercial-Style Baffle
Halogen Lighting
120 Volt, 40 Watt Max.,
G-9 Base, Included
36"– 2 Bulbs
42" / 48" / 54"– 4 Bulbs
Infrared Keep-Hot Lights
PAR-38 175W or PAR-40
250W, Included
2
Electrical
120V AC, 60Hz
- Three fan speeds
- Auto function senses heat from the cooking surface and adjusts fan speeds
- Powerfully Quiet ventilation systems
- Extended capture area ensures removal of smoke and odor
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Dimmer lighting – for a soft lighting effect
- Two Infrared Keep-Hot Lamps hold food warm until serving time
- Dishwasher-safe stainless steel baffle filters
- Dishwasher-safe grease collection trays are easily removed
- Filter systems are highly efficient at capturing grease
- Vertical or horizontal ducting direction
- Seven different blowers to choose from the lineup according to
cooking needs
- Choose from Inline, Remote or Integrated Blowers
- Blowers sold separately
- Hood includes filters, backdraft damper and transition
- Approved by CSA / UL for damp environments
DESIGN
- 27" depth hood is a perfect companion to the Pro Grand Professional Range
- Chiseled design for a seamless integration into any kitchen
- Brushed stainless steel finish
- Halogen lighting spotlights your best recipes
- Easy-to-view recessed control panel with stainless steel buttons
- Stainless steel professional baffle filters
ACCESSORIES
Duct Cover
Keep-Hot Shelf
KHS36QS 36" wide
KHS42QS 42" wide
KHS48QS 48" wide
– Stainless steel finish
– Convenient shelf allows dishes to
keep hot at serving temperature.
– Includes stainless steel backguard
and two shelves.
Stainless steel duct cover
for wall hood applications
Stainless Steel Backsplash
PA36JBS 36" wide
PA48JBS 48" wide
148
Width
36-Inch
42-Inch
48-Inch
6-Inch High
DC36US
N/A
DC48US
12-Inch High
DCT36US
DCT42US
DCT48US
PH36GS / PH42GS / PH48GS / PH54GS
INSTALLATION OPTIONS
Thermador Wall Hoods may be installed above a
Thermador Cooktop or Range to create a convenient
cooking center. Refer to the appropriate section for
additional specifications.
REMOTE BLOWER ACCESSORIES
Roofplate RFPLT600
For use with Remote
Blower VTR630D
Roofplate RFPLT1000
For use with Remote Blowers
VTR1030D and VTR1330E
Hood installation height above a cooktop or range can
vary. To obtain the necessary installation height above
a Thermador Professional Cooktop or Range, consult
the appliance‘s installation manual. Accessory 6"
and / or 12" tall duct covers are used to fill the space
between the hood and ceiling.
Both vertical and horizontal discharge is possible with
either mounting method. The hood is shipped ready
for vertical discharge.
EXTNCB25
25 ft. Blower
Connector Cable
for use with the
following Inline
and Remote
blowers:
VTR630D,
VTR1030D,
VTR1330E,
VTI610D,
VTI1010D
VENTILATION — WALL HOODS
VENTILATION
27-INCH DEPTH WALL HOOD (36"/42"/48"/54")
ROOF JACK, WALL CAP & TRANSITION
BLOWER OPTIONS
REMOTE
Roof Jack – RJ310
VTR630D – 600 CFM
Use Roofplate RFPLT600
in roof-mount applications
VTR1030D – 1000 CFM
Use Roofplate RFPLT1000
in roof-mount applications
VTR1330E – 1300 CFM
Use Roofplate RFPLT1000
in roof-mount applications
INLINE
Wall Cap – WC10
Transition
REMOTE (Mounted to roof or external wall)
VTI610D – 600 CFM
Use WC10 Wall Cap
VTI1010D – 1000 CFM
Use WC10 Wall Cap
VTR630D – 600 CFM
VTR1030D – 1000 CFM
VTR1330E – 1300 CFM
INTEGRATED
VTN630N– 600 CFM
Use WC10 Wall Cap
VTN1030N– 1000 CFM
Use WC10 Wall Cap
HOOD DIMENSIONS
INLINE (Mounted between kitchen and external wall)
VTI610D – 600 CFM
VTI1010D – 1000 CFM
INTEGRATED (Mounted in hood)
VTN630N– 600 CFM
1.800.735.4328 | THERMADOR.COM
VTN1030N– 1000 CFM
149
VENTILATION
24-INCH DEPTH WALL HOOD (30"/36"/48")
PH30HS / PH36HS / PH48HS
PH30HS / PH36HS / PH48HS
PERFORMANCE
- Three fan speeds
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Filter systems are highly efficient at capturing grease
- Dishwasher-safe grease collection trays are easily removed
- Powerfully Quiet ventilation systems
- Blowers sold separately
- Seven different blowers to choose from the lineup according
to cooking needs
- Choose from Inline, Remote or Integrated Blowers
- 10" Round duct size
- Vertical or horizontal ducting direction
- Hood includes filters, backdraft damper and transition
- Approved by CSL for damp environments
PROFESSIONAL
PH30HS – 30-Inch
PH36HS – 36-Inch
PH48HS – 48-Inch
SPECIFICATIONS
DESIGN
Available Hood Widths
30" / 36" / 48"
CSA Approved for Damp
Environments
Yes
Blower
Sold Separately – See
Blower Options Table
Duct Size at Discharge
10"
Ducting Direction
Vertical or Horizontal
Dishwasher-safe Filters
Commercial-Style
Stainless Steel Baffle Filter
Halogen Lighting
120 Volt, 40 Watt Max.,
G-9 Base, Included
30" / 36"– 2 Bulbs
48"– 4 Bulbs
Electrical
120V AC, 60Hz
- 24" depth hood is 18" tall and a perfect companion with
Pro Harmony Ranges and Rangetops
- Chiseled design for a seamless integration into any kitchen
- Brushed stainless steel finish
- Stainless steel control buttons
- Halogen lighting spotlights your best recipes
- Stainless steel professional style baffle filters
- Dishwasher-safe stainless steel baffle filters
- Dimmer lighting – for a soft lighting effect
ACCESSORIES
Duct Cover
Keep-Hot Shelf
KHS30QS
KHS36QS
KHS42QS
KHS48QS
30" wide
36" wide
42" wide
48" wide
– Stainless steel finish
– Convenient shelf allows dishes to
keep hot at serving temperature.
– Includes stainless steel backguard
and two shelves.
Stainless steel duct cover
for wall hood applications
Stainless Steel Backsplash
PA30JBS 30" wide
PA36JBS 36" wide
PA48JBS 48" wide
150
Width
30-Inch
36-Inch
48-Inch
6-Inch High
DC30US
DC36US
DC48US
12-Inch High
DCT30US
DCT36US
DCT48US
PH30HS / PH36HS / PH48HS
INSTALLATION OPTIONS
HOOD DIMENSIONS
Thermador Wall Hoods may be installed above a
Thermador Cooktop or Range to create a convenient
cooking center. Refer to the appropriate section for
additional specifications.
Hood installation height above a cooktop or range can
vary. To obtain the necessary installation height above a
Thermador Professional Cooktop or Range, consult the
appliance‘s installation manual. Accessory 6" and / or
12" duct covers are used to fill the space between the
hood and ceiling.
48
36"
30"
18"
12"
21
4"
VENTILATION — WALL HOODS
VENTILATION
24-INCH DEPTH WALL HOOD (30"/36"/48")
Both vertical and horizontal discharge is possible with
either mounting method. The hood is shipped ready for
vertical discharge.
ROOF JACK, WALL CAP & TRANSITION
BLOWER OPTIONS
Roof Jack – RJ310
Wall Cap – WC10
Transition
REMOTE
VTR630D – 600 CFM
Use Roofplate RFPLT600
in roof-mount applications
VTR1030D – 1000 CFM
Use Roofplate RFPLT1000
in roof-mount applications
VTR1330E – 1300 CFM
Use Roofplate RFPLT1000
in roof-mount applications
INLINE
REMOTE (Mounted to roof or external wall)
VTR630D – 600 CFM
VTI610D – 600 CFM
VTR1030D – 1000 CFM
VTR1330E – 1300 CFM
VTI1010D – 1000 CFM
INTEGRATED
VTN630N– 600 CFM
Use WC10 Wall Cap
VTN1030N– 1000 CFM
Use WC10 Wall Cap
See page 147 for further details.
REMOTE BLOWER ACCESSORIES
INLINE (Mounted between kitchen and external wall)
VTI610D – 600 CFM
Roofplate RFPLT600
For use with Remote
Blower VTR630D
Roofplate RFPLT1000
For use with Remote Blowers
VTR1030D and VTR1330E
EXTNCB25
25 ft. Blower Connector Cable for use with the following
Inline and Remote blowers: VTR630D, VTR1030D,
VTR1330E, VTI610D, VTI1010D
1.800.735.4328 | THERMADOR.COM
VTI1010D – 1000 CFM
INTEGRATED (Mounted in hood)
VTN630N– 600 CFM
VTN1030N– 1000 CFM
151
VENTILATION
24-INCH DEPTH WALL HOOD WITH BLOWER (30"/36"/48")
HPWB30FS / HPWB36FS / HPWB48FS
HPWB30FS / HPWB36FS / HPWB48FS
PERFORMANCE
- 600 CFM Integrated Blower included with HPWB30FS; 1,200 CFM
Integrated Blower included with HPWB36FS and HPWB48FS
- Recirculation possible with kit RECIRC__FS (max 600 CFM)
- Three fan speeds
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Dimmer lighting – for a soft lighting effect
- Filter systems are highly efficient at capturing grease
- Grease collection trays are easily removed and dishwasher-safe
- Powerfully Quiet ventilation systems
- 10" Round duct size
- Vertical ducting direction
- Hood includes filters, backdraft damper and transition
- Accessories include: Stainless steel duct covers in 6" or 12" heights
- Replacement charcoal filters available (CHFILT3036)
PROFESSIONAL
HPWB30FS – 30-Inch
HPWB36FS – 36-Inch
HPWB48FS – 48-Inch
SPECIFICATIONS
Available Hood Widths
30" / 36" / 48"
Blower
30"– 600 CFM Blower
Included
36"– 1200 CFM Blower
Included
48"– 1200 CFM Blower
Included
Duct Size at Discharge
10" Round
Ducting Direction
Vertical
Dishwasher-safe Filters
Halogen Lighting
120 Volt, 50 Watt Max.,
GU10 Base, Not Included
Low-Profile Baffle
30" / 36"– 2 Bulbs
48"– 3 Bulbs
Electrical
120V AC, 60Hz
DESIGN
- Brushed stainless steel finish
- Welded, polished seams for a flawless design
- Stainless steel button controls
- Halogen lighting spotlights your best recipes
- Dishwasher-safe low-profile baffle filters
ACCESSORIES
Duct Cover
Stainless steel duct cover
for wall hood applications
Stainless Steel Backsplash
PA30JBS 30" wide
PA36JBS 36" wide
PA48JBS 48" wide
Width
30-Inch
36-Inch
48-Inch
6-Inch High
DC30US
DC36US
DC48US
12-Inch High
DCT30US
DCT36US
DCT48US
Recirculation Kit for 30" Hood Only
RECIRC30FS 30" wide
– Stainless steel finish
– Perfect for hard to duct installations
– Use with 600 CFM blowers only
Replacement Charcoal Filters
CHFILT3036
For use with Recirculation Kit RECIRC_FS
152
HPWB30FS / HPWB36FS / HPWB48FS
INSTALLATION OPTIONS
HOOD DIMENSIONS
Thermador Wall Hoods may be installed above a Thermador Cooktop or Range
to create a convenient cooking center. Refer to the appropriate section for
additional specifications.
Hood installation height above a cooktop or range can vary. To obtain the
necessary installation height above a Thermador Professional Cooktop or
Range, consult the appliance‘s installation manual. Accessory 6" and / or 12"
duct covers are used to fill the space between the hood and ceiling.
This Thermador Wall Hood can be mounted on a wall or suspended from a
cabinet. The cabinet must be structurally joined to the wall studs to support the
weight of this hood.
VENTILATION — WALL HOODS
VENTILATION
24-INCH DEPTH WALL HOOD WITH BLOWER (30"/36"/48")
These hoods are designed to be used for vertical discharge. A ductless,
recirculation installation is possible with kit RECIRC__FS.
BLOWER PRESSURE CURVES
HPWB30FS
HPWB36FS
HPWB48FS
NOTE: All measurements are made with 3 ft. straight duct, 90° bend and 1 ft.
straight duct at exhaust. These are NOT free blowing measurements.
1.800.735.4328 | THERMADOR.COM
153
VENTILATION
WALL HOOD (30"/48")
HMWN30FS / HMWN48FS
HMWN30FS / HMWN48FS
PERFORMANCE
- Recirculation possible with kit RECIRC__FS (max 600 CFM)
- Three fan speeds plus 10 minute high-power operation mode
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Dishwasher-safe low-profile baffle filters
- Grease collection trays are easily removed and dishwasher-safe
- Filter systems are highly efficient at capturing grease
- Powerfully Quiet ventilation systems
- 10" Round duct size
- Vertical ducting direction
- Hood includes filters, lights, backdraft damper and transition
- Blowers sold separately
- Choose from Inline, Remote or Integrated Blowers
- Accessories include: Stainless steel duct covers in 6" or 12" heights
- Replacement charcoal filters available (CHFILT3036)
MASTERPIECE
HMWN30FS – 30-Inch
HMWN48FS – 48-Inch
SPECIFICATIONS
Available Hood Widths
30" / 48"
Blower
Sold separately –
See Blower Options table
Duct Size at Discharge
10" Round
Ducting Direction
Vertical
Dishwasher-safe Filters
Halogen Lighting
120 Volt, 50 Watt Max.,
GU10 Base, Not Included
Low-Profile Baffle
30"– 2 Bulbs
48"– 3 Bulbs
Electrical
120V AC, 60Hz
DESIGN
- Brushed stainless steel finish
- Welded, polished seams for a flawless design
- Premium electronic touch controls
- Halogen lighting spotlights your best recipes
ACCESSORIES
Duct Cover
Stainless steel duct cover
for wall hood applications
Stainless Steel Backsplash
PA30JBS 30" wide
PA48JBS 48" wide
Width
30-Inch
48-Inch
6-Inch High
DC30US
DC48US
12-Inch High
DCT30US
DCT48US
Recirculation Kit
RECIRC30FS 30" wide
– Stainless steel finish
– Perfect for hard to duct installations
– Use with 600 CFM blowers only
Replacement Charcoal Filters
CHFILT3036
For use with Recirculation Kit RECIRC_FS
154
HMWN30FS / HMWN48FS
INSTALLATION OPTIONS
HOOD DIMENSIONS
Thermador Wall Hoods may be installed above a Thermador Cooktop or
Range to create a convenient cooking center. Refer to the appropriate section
for additional specifications.
Hood installation height above a cooktop or range can vary. To obtain the
necessary installation height above a Thermador Professional Cooktop or
Range, consult the appliance‘s installation manual. Accessory 6" and / or 12"
duct covers are used to fill the space between the hood and ceiling.
This Thermador Wall Hood can be mounted on a wall or suspended from a
cabinet. The cabinet must be structurally joined to the wall studs to support
the weight of this hood.
VENTILATION — WALL HOODS
VENTILATION
WALL HOOD (30"/48")
These hoods are designed to be used for vertical discharge. A ductless,
recirculation installation is possible with kit RECIRC__FS.
These hoods are not recommended to be used over indoor grills.
REMOTE (Mounted to roof or external wall)
BLOWER OPTIONS
REMOTE
VTR630D – 600 CFM
VTR630D – 600 CFM
Use Roofplate RFPLT600
in roof-mount applications
VTR1030D – 1000 CFM
Use Roofplate RFPLT1000
in roof-mount applications
VTR1330E – 1300 CFM
Use Roofplate RFPLT1000
in roof-mount applications
VTR1030D – 1000 CFM
VTR1330E – 1300 CFM
INLINE
VTI610D – 600 CFM
VTI1010D – 1000 CFM
INLINE (Mounted between kitchen and external wall)
INTEGRATED
VTN600F – 600 CFM
VTN1000F – 1000 CFM
VTI610D – 600 CFM
VTI1010D – 1000 CFM
Not for use with 30" hood
See page 147 for further details.
­REMOTE BLOWER ACCESSORIES
INTEGRATED (Mounted in hood)
VTN600F – 600 CFM
Roofplate RFPLT600
For use with Remote
Blower VTR630D
VTN1000F – 1000 CFM
Roofplate RFPLT1000
For use with Remote Blowers
VTR1030D and VTR1330E
1.800.735.4328 | THERMADOR.COM
155
VENTILATION
WALL HOOD WITH BLOWER (30"/36")
HMWB30FS / HMWB36FS
HMWB30FS / HMWB36FS
PERFORMANCE
- 600 CFM Integrated Blower included
- Recirculation possible with kit RECIRC__FS (max 600 CFM)
- Three fan speeds plus 10 minute high-power operation mode
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Dishwasher-safe low-profile baffle filters
- Grease collection trays are easily removed and dishwasher-safe
- Filter systems are highly efficient at capturing grease
- Powerfully Quiet ventilation systems
- 10" Round duct size
- Vertical ducting direction
- Hood includes filters, lights, backdraft damper and transition
- Accessories include: Stainless steel duct covers in 6" or 12" heights
- Replacement charcoal filters available (CHFILT3036)
MASTERPIECE
HMWB30FS – 30-Inch
HMWB36FS – 36-Inch
SPECIFICATIONS
Available Hood Widths
30" / 36"
DESIGN
Blower
600 CFM Blower Included
Duct Size at Discharge
10" Round
Ducting Direction
Vertical
Dishwasher-safe Filters
Halogen Lighting
120 Volt, 50 Watt Max.,
GU10 Base, Not Included
Low-Profile Baffle
2 Bulbs
- Brushed stainless steel finish
- Welded, polished seams for a flawless design
- Easy-to-operate control buttons
- Halogen lighting spotlights your best recipes
Electrical
120V AC, 60Hz
ACCESSORIES
Duct Cover
Stainless steel duct cover
for wall hood applications
Width
30-Inch
36-Inch
48-Inch
6-Inch High
DC30US
DC36US
DC48US
12-Inch High
DCT30US
DCT36US
DCT48US
Recirculation Kit
RECIRC30FS 30" wide
RECIRC36FS 36" wide
Stainless Steel Backsplash
PA30JBS 30" wide
PA36JBS 36" wide
– Stainless steel finish
– Perfect for hard to duct installations
– Use with 600 CFM blowers only
Replacement Charcoal Filters
CHFILT3036
For use with Recirculation Kit RECIRC_FS
156
HMWB30FS / HMWB36FS
INSTALLATION OPTIONS
Thermador Wall Hoods may be installed above a Thermador
Cooktop or Range to create a convenient cooking center.
Refer to the appropriate section for additional specifications.
Hood installation height above a cooktop or range can vary.
To obtain the necessary installation height above a Thermador
Professional® Cooktop or Range, consult the appliance‘s
installation manual. Accessory 6" and / or 12" duct covers are
used to fill the space between the hood and ceiling.
This Thermador Wall Hood can be mounted on a wall or
suspended from a cabinet. The cabinet must be structurally
joined to the wall studs to support the weight of this hood.
HOOD DIMENSIONS
VENTILATION — WALL HOODS
VENTILATION
WALL HOOD WITH BLOWER (30"/36")
These hoods are designed to be used for vertical discharge.
A ductless, recirculation installation is possible with kit
RECIRC__FS.
These hoods are not recommended to be used over indoor grills.
BLOWER PRESSURE CURVES
HMWB30FS
HMWB36FS
NOTE: All measurements are made with 3 ft. straight duct,
90° bend and 1 ft. straight duct at exhaust. These are NOT
free blowing measurements.
1.800.735.4328 | THERMADOR.COM
157
158
MODELS SHOWN: HDDW36FS CHIMNEY WALL DRAWER HOOD, SGSX365FS GAS COOKTOP AND
MED301JS BUILT-IN OVEN
VENTILATION — CHIMNEY WALL HOODS
VENTILATION
CHIMNEY
WALL
HOODS
Our Professional Series chimney style wall hoods impart a more contemporary feel to the
kitchen space while Masterpiece® Series impart a more traditional feel. Each model is
adjustable to suit a range of ceiling heights and includes conveniences such as dishwasher-safe
filters and electronic controls. Halogen lighting brilliantly illuminates your cooking space for
excellent visibility.
1.800.735.4328 | THERMADOR.COM
159
CHIMNEY WALL HOODS
FEATURES & BENEFITS
PLANNING INFORMATION
MODEL OPTIONS
Thermador Chimney Wall Hoods feature sleek styling and
numerous convenience functions. Chimney Wall Hoods are
available in 36-inch, 42-inch and 48-inch widths and are
adjustable to suit a range of ceiling heights. All stainless steel
or stainless steel with glass designs are available. Be sure to
reference the correct model information in this design guide.
ELECTRICAL SPECIFICATIONS
Be sure your Thermador Chimney Wall Hood is properly installed
and grounded by a qualified technician. Installation, electrical
connections and grounding must comply with all applicable
local codes.
If possible, site the earthed socket directly behind the chimney
paneling. The grounded socket should be connected via its own
circuit. If the grounded socket is no longer accessible following
installation of the hood, ensure that there is a permanently
installed disconnector.
MODEL
HALOGEN LIGHTS
Bright halogen lighting spotlights your best recipes.
MESH FILTERS
Aluminum mesh filters with stainless
steel frame maximize grease capture
without affecting flow and feature a
quick release latch for easy cleanup.
REQUIRED
CIRCUIT BREAKER
120V AC, 60 Hz
HPCN36NS, HPCN48NS,
HPCB36NS, HPCB48NS,
HMCN36FS, HMCN42FS,
HMCB36FS, HMCB42FS,
HDDW36FS
15 Amp
INSTALLATION CONSIDERATIONS
The information in this design guide provides key features,
product dimensions, cutouts and installation specifications.
Before installing a Thermador Chimney Wall Hood, be sure to
verify the cutout dimensions and electrical connections. Also,
always consult with the installation manual packed with the
product for complete details before installing.
Thermador Chimney Wall Hoods may be installed above a
Thermador non-professional gas, electric, or induction cooktop
to create a convenient cooking center. Refer to the appropriate
section for additional specifications.
ELECTRONIC TOUCH CONTROL
The sleek electronic touch control panel
is easy-to-use and easy-to-clean.
TIME-TO-CLEAN-FILTER LIGHT
Easy cleanup: All Thermador ventilation filters are dishwasher-safe,
and many hoods feature a built-in Time-to-Clean-Filter reminder
light. (Except HMCB36FS, HMCB42FS)
DELAYED SHUT-OFF
For the greatest efficiency, our Professional and Masterpiece®
ventilation models include delayed shut-off to tackle lingering
odors. (Except HMCB36FS, HMCB42FS)
160
DISTANCE FROM COOKING SURFACE
Proper mounting height is very important. If a hood is mounted
too low, it may be difficult to cook and be unsafe. If a hood is
mounted too high, performance may be compromised.
For optimal performance, the distance from the cooking surface
to the bottom of the hood should be a minimum of 30", unless
otherwise noted. Please refer to the installation manual for each
hood and cooktop / range model for proper hood mounting
heights.
HOOD WIDTH
The hood width should be no less than the width of the cooking
surface. Where space is not restricted, a wider hood can be used
to increase your capture area.
AVAILABLE CEILING HEIGHT
CHOOSING THE RIGHT CFM
The standard ceiling height can vary from region to
region and in homes built in different eras. Ceiling
heights, even in the same room, can sometimes vary
by as much as several inches. Kitchen ceiling heights
can vary between 7'6" (or 90") to over 10' (or 120").
The power of the cooktop or range, measured in BTU, is perhaps the most
important factor in determining CFM needs for a hood.
Before selecting your hood, check your available
installation space and any extra space that may remain
after proper installation of your hood and cooktop or
range. This extra space can be filled using Thermador‘s
Stainless Steel Duct Cover or Chimney Extension
Accessories. The space can also be adjusted by raising
or lowering your hood within the recommended range
(typically 30" to 36" above the cooking surface).
CHOOSING THE CORRECT BLOWER
A variety of interior and exterior blower options
(Remote, Inline or Integrated) are available for
Thermador’s Professional and Masterpiece® Series
Hoods. If the unit you have selected does not have
a blower included, one can be purchased separately.
Blower selection will vary based on the volume of air
that needs to be moved and the length and location
of the duct run. For long duct runs with multiple turns
and bends, consider using a more powerful blower. For
the most efficient air flow exhaust, use a straight run or
as few elbows as possible.
Remote Blowers (VTR Series)
Depending on your preference and ducting situation,
these blowers can be mounted on the roof or exterior
wall of your home. An exterior installation may be
more appealing to reduce noise in the kitchen.
Inline Blowers (VTI series)
To minimize noise in the kitchen, these blowers are
mounted along the duct line anywhere between the
kitchen and the exterior wall. If you have easy access
to your duct line (in an attic, for example), this may be
an appealing option.
Integrated Blowers (VTN series)
These blowers are purchased separately and
integrated into the hood or onto the downdraft unit at
the time of installation. This option allows you to select
your ideal hood with the exact power you require.
You should also consider the cooking space and cooking style of your client.
• More demanding cooks usually require more exhaust capacity to handle
moisture generated by boiling large pots of water or the grease and smoke
resulting from grilling or frying. This cooking style could require a hood or
downdraft system with airflow of 600 to 1,300 CFM.
• High heat cooking or aromatic foods may require additional CFM.
Increasing capture area by 3" on each side is also a recommended way to
address this issue.
• For those who are used to preparing quick meals in a relatively small
kitchen, a hood with 400 to 600 CFM may be adequate ventilation for the
cooking space.
• If the cooking surface is in a peninsula or island, a larger capacity hood can
provide better capture when there are cross currents and when the hood
needs to be mounted higher. Downdraft ventilation systems are also a
good alternative.
VENTILATION — CHIMNEY WALL HOODS
CHIMNEY WALL HOODS
PLANNING INFORMATION
LENGTH AND SIZE OF DUCTWORK
Proper performance is dependent upon proper ducting. Use a qualified and
trained installer.
Do not use flexible duct; it creates back pressure / air turbulence and reduces
performance.
Straight runs and gradual turns are best. Use the shortest route with the
fewest turns possible.
Local building codes may require the use of makeup air systems when using
ducted ventilation systems greater than specified CFM of air movement. The
specified CFM varies from locale to locale. Consult your HVAC professional
for specific requirements in your area.
If using a 10" duct, Thermador recommends not exceeding 50 feet of duct.
Transitions, elbows and wall or roof caps are all factors that will add more
static pressure, therefore increasing your equivalent duct run.
WARRANTY
Limited warranty parts and labor (2 year)
See page 310 for additional warranty details.
SPECIAL NOTE: Always allow access to the blower for
serviceability, should it be needed.
1.800.735.4328 | THERMADOR.COM
161
VENTILATION
CHIMNEY WALL HOOD (36"/48")
HPCN36NS / HPCN48NS
HPCN36NS / HPCN48NS
PERFORMANCE
- Three fan speeds
- Powerfully Quiet® ventilation systems
- Dimmer lighting – for a soft lighting effect
- Dishwasher safe stainless steel baffle filters
- Dishwasher safe grease collection trays are easily removed
- Filter systems are highly efficient at capturing grease
- Vertical ducting direction
- Six different blowers to choose from the line up according to
cooking needs
- Choose from Inline, Remote or Integrated Blowers
- Blowers sold separately
- Hood includes filters, backdraft damper and transition
- 10" Round duct size
PROFESSIONAL
HPCN36NS – 36-Inch
HPCN48NS – 48-Inch
DESIGN
SPECIFICATIONS
Available Hood Widths
36" / 48"
Blower
Sold Separately —
See Blower Options Table
Duct Size at Discharge
10" Round
Ducting Direction
Vertical
Dishwasher-safe Filters
Stainless Steel Baffle
Halogen Lighting
120 Volt, 40 Watt Max.,
G-9 Base, Included
36-Inch – 2 Bulbs
48-Inch – 4 Bulbs
Electrical
120V AC, 60Hz
- Chiseled design for a seamless integration into any kitchen
- Halogen lighting spotlights your best recipes
- Brushed stainless steel finish
- Stainless steel control buttons
- Stainless steel duct covers available as an accessory
- Thermador Professional Series Chimney style wall hoods impart a
more contemporary feel to the kitchen space and create a dramatic
gathering point.
- Delayed shut-off tackles lingering odors for up to ten minutes
- Auto function senses the heat from the cooking surface and adjusts
the fan speeds
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
ACCESSORIES
6" Duct Cover
12" Duct Cover
18" x 35" Duct Cover
Keep-Hot Shelf
CHMHP366N
CHMHP486N
CHMHP3612N
CHMHP4812N
CHMHP36TSN
CHMHP48TSN
KHS36QS 36" wide
KHS48QS 48" wide
6"
(152 mm)
141/16"
(356 mm)
207/8"
(531 mm)
12"
(305 mm)
207/8"
(531 mm)
141/16"
(356 mm)
6"
(152 mm)
141/16"
(356 mm)
18"-35"
(457 mm889 mm)
207/8"
(531 mm)
141/16"
(356 mm)
Stainless Steel Backsplash
PA36JBS 36" wide
PA48JBS 48" wide
327/8"
(836 mm)
12"
(305 mm)
327/8"
141/16"
(356 mm)
162
– Stainless steel finish
– Convenient shelf allows dishes to
keep hot at serving temperature.
– Includes stainless steel backguard
and two shelves.
18"-35"
(457 mm889 mm)
327/8"
(836 mm)
(836 mm)
141/16"
(356 mm)
HPCN36NS / HPCN48NS
INSTALLATION OPTIONS
HOOD DIMENSIONS
Thermador Chimney Wall Hoods may be installed above
a Thermador professional range or rangetop to create
a convenient cooking center. Refer to the appropriate
section for additional specifications.
Hood installation height above a cooktop can vary. To
obtain the necessary installation height above a range
or cooktop, consult the appliance’s installation manual.
Thermador Chimney Wall Hoods must be mounted on
a wall.
These hoods are designed to be used for vertical
discharge. The HPCN_NS and HMCN_FS hoods offer
the flexibility to choose a blower from our lineup to fit
your installation needs. All other chimney wall hoods
have the convenience of integrated blowers.
VENTILATION — CHIMNEY WALL HOODS
VENTILATION
CHIMNEY WALL HOOD (36"/48")
BLOWER OPTIONS
REMOTE
VTR630D – 600 CFM
Use Roofplate RFPLT600
in roof-mount applications
VTR1030D – 1000 CFM
Use Roofplate RFPLT1000
in roof-mount applications
VTR1330E – 1300 CFM
Use Roofplate RFPLT1000
in roof-mount applications
REMOTE (Mounted to roof or external wall)
VTR630D – 600 CFM
VTR1030D – 1000 CFM
VTR1330E – 1300 CFM
INLINE
VTI610D – 600 CFM
VTI1010D – 1000 CFM
INTEGRATED
VTN1080N– 1000 CFM
See page 161 for further details.
INLINE (Mounted between kitchen and external wall)
­REMOTE BLOWER ACCESSORIES
Roofplate RFPLT600
For use with Remote
Blower VTR630D
Roofplate RFPLT1000
For use with Remote Blowers
VTR1030D and VTR1330E
VTI610D – 600 CFM
VTI1010D – 1000 CFM
INTEGRATED (Mounted in hood)
VTN1080N– 1000 CFM
EXTNCB25
25 ft. Blower Connector Cable for use with the following
Inline and Remote blowers: VTR630D, VTR1030D,
VTR1330E, VTI610D, VTI1010D
1.800.735.4328 | THERMADOR.COM
163
VENTILATION
CHIMNEY WALL HOOD WITH BLOWER (36"/48")
HPCB36NS / HPCB48NS
HPCB36NS / HPCB48NS
PERFORMANCE
- Three fan speeds
- Dimmer lighting - for a soft lighting effect
- Dishwasher safe stainless steel baffle filters
- Dishwasher safe grease collection trays are easily removed
- Filter systems are highly efficient at capturing grease
- Vertical ducting direction
- 1000 CFM Internal Blower included
- Hood includes filters, backdraft damper and transition
- 10" Round duct size
PROFESSIONAL
HPCB36NS – 36-Inch
HPCB48NS – 48-Inch
DESIGN
- 24" depth hood is 18" tall and a perfect companion with Pro Ranges
and Rangetops
- Chiseled design for a seamless integration into any kitchen
- Halogen lighting spotlights your best recipes
- Brushed stainless steel finish
- Stainless steel control buttons
- Stainless steel duct covers available as an accessory
SPECIFICATIONS
Available Hood Widths
36" / 48"
Blower
1000 CFM Blower Included
Duct Size at Discharge
10" Round
Ducting Direction
Vertical
Dishwasher-safe Filters
Stainless Steel Baffle
Halogen Lighting
120 Volt, 40 Watt Max.,
G-9 Base, Included
36-Inch – 2 Bulbs
48-Inch – 4 Bulbs
Electrical
120V AC, 60Hz
ACCESSORIES
6" Duct Cover
12" Duct Cover
18" x 35" Duct Cover
Keep-Hot Shelf
CHMHP366N
CHMHP486N
CHMHP3612N
CHMHP4812N
CHMHP36TSN
CHMHP48TSN
KHS36QS 36" wide
KHS48QS 48" wide
6"
(152 mm)
141/16"
(356 mm)
207/8"
(531 mm)
12"
(305 mm)
207/8"
(531 mm)
141/16"
(356 mm)
6"
(152 mm)
141/16"
(356 mm)
18"-35"
(457 mm889 mm)
207/8"
(531 mm)
141/16"
(356 mm)
Stainless Steel Backsplash
PA36JBS 36" wide
PA48JBS 48" wide
327/8"
(836 mm)
12"
(305 mm)
327/8"
141/16"
(356 mm)
164
– Stainless steel finish
– Convenient shelf allows dishes to
keep hot at serving temperature.
– Includes stainless steel backguard
and two shelves.
18"-35"
(457 mm889 mm)
327/8"
(836 mm)
(836 mm)
141/16"
(356 mm)
HPCB36NS / HPCB48NS
INSTALLATION OPTIONS
Thermador Chimney Wall Hoods may be installed above
a Thermador professional range or rangetop to create a
convenient cooking center. Refer to the appropriate section for
additional specifications.
Hood installation height above a cooktop can vary. To obtain
the necessary installation height above a Thermador nonprofessional gas, electric, or induction cooktop, consult the
appliance’s installation manual.
Thermador Chimney Wall Hoods must be mounted on a wall.
These hoods are designed to be used for vertical discharge.
A 1,000 CFM integrated blower is included.
1.800.735.4328 | THERMADOR.COM
HOOD DIMENSIONS
VENTILATION — CHIMNEY WALL HOODS
VENTILATION
CHIMNEY WALL HOOD WITH BLOWER (36"/48")
165
VENTILATION
CHIMNEY WALL HOOD (36"/42")
HMCN36FS / HMCN42FS
HMCN36FS / HMCN42FS
PERFORMANCE
- Three fan speeds plus 10 minute high-power operation mode
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Dimmer lighting – for those hours after a late meal
- Dishwasher-safe stainless-frame mesh filters
- Filter systems are highly efficient at capturing grease
- Powerfully Quiet® ventilation systems
- Vertical ducting direction
- 8" Round duct size
- Telescopic chimney – adjustable at installation
- Blowers sold separately
- Choose from Inline, Remote or Integrated Blowers
MASTERPIECE®
DESIGN
HMCN36FS – 36-Inch
- Brushed stainless steel finish
- Welded, polished seams for a flawless design
- Premium electronic touch controls
- Halogen lighting spotlights your best recipes
HMCN42FS – 42-Inch
SPECIFICATIONS
Available Hood Widths
36" / 42"
Blower
Sold Separately —
See Blower Options Table
Duct Size at Discharge
8" Round
Ducting Direction
Vertical
Ceiling Heights
8' 2" ft. to 9 ft.
Dishwasher-safe Filters
3 Mesh with
Stainless-Frame
Halogen Lighting
12 Volt, 20 Watt Max.,
G-4 Base, Included
3 Bulbs
Electrical
120V AC, 60Hz
ACCESSORIES
Chimney Extension
CHIMXHMC
Stainless steel chimney hood extension for up to 11-foot
ceiling applications. Extension replaces upper section
of standard chimney extension. May require fabrication to
reduce height.
166
HMCN36FS / HMCN42FS
INSTALLATION OPTIONS
HOOD DIMENSIONS
Thermador Chimney Wall Hoods may be installed above
a Thermador non-professional gas, electric, or induction
cooktop to create a convenient cooking center. Refer to
the appropriate section for additional specifications.
Hood installation height above a cooktop can vary.
To obtain the necessary installation height above a
Thermador non-professional gas, electric, or induction
cooktop, consult the appliance’s installation manual.
Thermador Chimney Wall Hoods must be mounted on
a wall.
These hoods are designed to be used for vertical
discharge. The HMCN_FS hood offers the flexibility to
choose a blower from our lineup to fit your installation
needs. All other chimney wall hoods have the
convenience of integrated blowers.
VENTILATION — CHIMNEY WALL HOODS
VENTILATION
CHIMNEY WALL HOOD (36"/42")
BLOWER OPTIONS
REMOTE
VTR630D – 600 CFM
Use Roofplate RFPLT600
in roof-mount applications
VTR1030D – 1000 CFM
Use Roofplate RFPLT1000
in roof-mount applications
VTR1330E – 1300 CFM
Use Roofplate RFPLT1000
in roof-mount applications
REMOTE (Mounted to roof or external wall)
VTR630D – 600 CFM
VTR1030D – 1000 CFM
VTR1330E – 1300 CFM
INLINE
VTI610D – 600 CFM
VTI1010D – 1000 CFM
INTEGRATED
VTN1080N– 1000 CFM
See page 161 for further details.
­REMOTE BLOWER ACCESSORIES
INLINE (Mounted between kitchen and external wall)
VTI610D – 600 CFM
Roofplate RFPLT600
For use with Remote
Blower VTR630D
Roofplate RFPLT1000
For use with Remote Blowers
VTR1030D and VTR1330E
1.800.735.4328 | THERMADOR.COM
VTI1010D – 1000 CFM
INTEGRATED (Mounted in hood)
VTN1080N– 1000 CFM
167
VENTILATION
CHIMNEY WALL HOOD WITH BLOWER (36"/42")
HMCB36FS / HMCB42FS
HMCB36FS / HMCB42FS
PERFORMANCE
- 600 CFM Integrated Blower included
- Three fan speeds plus 10 minute high-power operation mode
- Dishwasher-safe stainless-frame mesh filters
- Filter systems are highly efficient at capturing grease
- Powerfully Quiet® ventilation systems
- 6" Round duct size
- Vertical ducting direction
- Telescopic chimney – adjustable at installation
- Hood includes filters, lights, backdraft damper and transition
DESIGN
- Brushed stainless steel finish
- Welded, polished seams for a flawless design
- Easy-to-operate control buttons
- Halogen lighting spotlights your best recipes
MASTERPIECE®
HMCB36FS – 36-Inch
HMCB42FS – 42-Inch
SPECIFICATIONS
Available Hood Widths
36" / 42"
Blower
600 CFM Blower Included
Duct Size at Discharge
6" Round
Ducting Direction
Vertical
Ceiling Heights
8' 2" ft. to 9 ft.
Dishwasher-safe Filters
3 Mesh with
Stainless-Frame
Halogen Lighting
12 Volt, 20 Watt Max.,
G-4 Base, Included
3 Bulbs
Electrical
120V AC, 60Hz
ACCESSORIES
Chimney Extension
CHIMXHMC
Stainless steel chimney hood extension for up to 11-foot
ceiling applications. Extension replaces upper section
of standard chimney extension. May require fabrication to
reduce height.
168
HMCB36FS / HMCB42FS
INSTALLATION OPTIONS
Thermador Chimney Wall Hoods may be installed above a
Thermador non-professional gas, electric, or induction cooktop
to create a convenient cooking center. Refer to the appropriate
section for additional specifications.
Hood installation height above a cooktop can vary. To obtain
the necessary installation height above a Thermador nonprofessional gas, electric, or induction cooktop, consult the
appliance’s installation manual.
Thermador Chimney Wall Hoods must be mounted on a wall.
These hoods are designed to be used for vertical discharge.
A 600 CFM integrated blower is included.
BLOWER PRESSURE CURVES
HOOD DIMENSIONS
VENTILATION — CHIMNEY WALL HOODS
VENTILATION
CHIMNEY WALL HOOD WITH BLOWER (36"/42")
HMCB36FS
HMCB42FS
NOTE: All measurements are made with 3 ft. straight duct,
90° bend and 1 ft. straight duct at exhaust. These are NOT
free blowing measurements.
1.800.735.4328 | THERMADOR.COM
169
VENTILATION
CHIMNEY WALL DRAWER HOOD (36")
HDDW36FS
HDDW36FS
INNOVATION
- Unique sliding stainless canopy can be pushed back against
the wall for increased head room
- 45% increase in capture area when hood is extended
PERFORMANCE
- 600 CFM Integrated Blower included
- Three fan speeds plus 10 minute high-power operation mode
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Dimmer lighting – for those hours after a late meal
- Dishwasher-safe stainless-frame mesh filters
- Filter systems are highly efficient at capturing grease
- Powerfully Quiet® ventilation systems
- Sound insulation mats make this hood barely audible
- 6" Round duct size
- Vertical ducting direction
- Telescopic chimney – adjustable at installation
- Hood includes filters, backdraft damper and transition
MASTERPIECE®
HDDW36FS – 36-Inch
DESIGN
SPECIFICATIONS
Available Hood Widths
36"
Blower
600 CFM Blower Included
Duct Size at Discharge
6" Round
Ducting Direction
Vertical
Ceiling Heights
7 3/4 ft. to 9 1/2 ft.
Dishwasher-safe Filters
4 Mesh with
Stainless-Frame
Halogen Lighting
12 Volt, 20 Watt Max.,
G-4 Base, Included
4 Bulbs
Electrical
120V AC, 60Hz
ACCESSORIES
Chimney Extension
CHIMXHDD
Stainless steel chimney hood extension for up to 11-foot
ceiling applications. Extension replaces upper section
of standard chimney extension. May require fabrication to
reduce height.
170
- Brushed stainless steel finish
- Welded, polished seams for a flawless design
- Premium electronic touch controls
- Halogen lighting spotlights your best recipes
THERMADOR EXCLUSIVE
HDDW36FS
INSTALLATION OPTIONS
Thermador Chimney Wall Hoods may be installed above a
Thermador non-professional gas, electric, or induction cooktop
to create a convenient cooking center. Refer to the appropriate
section for additional specifications.
Hood installation height above a cooktop can vary. To obtain
the necessary installation height above a Thermador nonprofessional gas, electric, or induction cooktop, consult the
appliance’s installation manual.
Thermador Chimney Wall Hoods must be mounted on a wall.
These hoods are designed to be used for vertical discharge.
A 600 CFM integrated blower is included.
BLOWER PRESSURE CURVES
HDDW36FS
INSTALLATION NOTE: This product ships with two
transport brackets to hold the moveable canopy in place
during shipping and installation. After installation, be sure to
remove the brackets to operate the sliding drawer canopy.
VENTILATION — CHIMNEY
ISLAND HOODS
WALL HOODS
VENTILATION
CHIMNEY WALL DRAWER HOOD (36")
NOTE: All measurements are made with 3 ft. straight duct,
90° bend and 1 ft. straight duct at exhaust. These are NOT
free blowing measurements.
1.800.735.4328 | THERMADOR.COM
171
172
MODELS SHOWN: HMIB40HS ISLAND HOOD AND CIT365KB INDUCTION COOKTOP
VENTILATION — ISLAND HOODS
VENTILATION
ISLAND
HOODS
Thermador Island Hoods put the finishing touches on your cooking system, with excellent
overall efficiency in drawing away smoke, moisture and heat. The adjustable chimney height is
perfect over island cooktop or range installations. Dishwasher-safe filters make cleanup easy.
1.800.735.4328 | THERMADOR.COM
173
ISLAND HOODS
FEATURES & BENEFITS
PLANNING INFORMATION
MODEL OPTIONS
Thermador Island Hoods are available in 40-inch, 42-inch and
48-inch widths and feature a stainless steel design and the
40-inch has an elegant glass canopy. All of our island hoods are
adjustable to suit ceiling heights of up to 9'.
ELECTRICAL SPECIFICATIONS
Be sure your Thermador Island Hood is properly installed
and grounded by a qualified technician. Installation, electrical
connections and grounding must comply with all applicable
local codes.
MODEL
REQUIRED
CIRCUIT BREAKER
120V AC, 60 Hz
HPIN42HS, HPIN48HS
HPIB42HS, HPIB48HS
HMIB40HS
EXTERIOR CONTROLS
Easy-to-clean, easy-to-use push-button controls put accuracy at
your fingertips.
POWERFULLY QUIET® OPERATION
Steam, smoke and odors are no problem for Thermador‘s ducted
ventilation systems.
TIME-TO-CLEAN-FILTER LIGHT
Easy cleanup: All Thermador ventilation filters are dishwasher-safe, and
many hoods feature a built-in Time-to-Clean-Filter reminder light.
Max 10 Amp
INSTALLATION CONSIDERATIONS
The information in this design guide provides key features,
product dimensions and installation specifications. Before
installing a Thermador Island Hood, be sure to verify the
dimensions and electrical connections. Also, always consult with
the installation manual packed with the product for complete
details before installing.
Thermador Island Hoods may be installed above Thermador
Cooktops to create a convenient cooking center. Refer to the
appropriate section for additional specifications.
HOOD WIDTH
DISHWASHER-SAFE FILTERS
Dishwasher-safe aluminum filters for easy-clean maintenance.
DELAYED SHUT-OFF
For the greatest efficiency, our ventilation models include delayed
shut-off to tackle lingering odors.
The hood width should be no less than the width of the cooking
surface. Where space is not restricted, a wider hood can be
used to increase your capture area. Island installations require a
greater capture area; therefore the hoods used should overlap
your cooking surface by a minimum of 3" to 6" on either side.
DISTANCE FROM COOKING SURFACE
HALOGEN LIGHTS
Bright halogen lighting spotlights your
best recipes.
174
Proper mounting height is very important. If a hood is mounted
too low, it may be difficult to cook and be unsafe. If a hood
is mounted too high, performance may be compromised. For
optimal performance, the distance from the cooking surface to
the bottom of the hood should be a minimum of 30", unless
otherwise noted. Please refer to the installation manual for
each hood and cooktop / range model for proper hood
mounting heights.
AVAILABLE CEILING HEIGHT
CHOOSING THE RIGHT CFM
The standard ceiling height can vary from region to
region and in homes built in different eras. Ceiling
heights, even in the same room, can sometimes vary
by as much as several inches. Kitchen ceiling heights
can vary between 7'6" (or 90") to over 10' (or 120").
The power of the cooktop or range, measured in BTU, is perhaps the most
important factor in determining CFM needs for a hood.
Before selecting a Thermador Hood, check the
available installation space and any extra space that
may remain after proper installation of a hood and
cooktop or range. This extra space can be filled using
Thermador’s stainless steel duct cover accessories. The
space can also be adjusted by raising or lowering your
hood within the recommended range (typically 30" to
36" above the cooking surface).
CHOOSING THE CORRECT BLOWER
A variety of interior and exterior blower options
(Remote or Inline) are available for Thermador’s
Island Hoods. If the unit you have selected does not
have a blower, one can be purchased separately.
Blower selection will vary based on the volume of air
that needs to be moved and the length and location
of the duct run. For long duct runs with multiple turns
and bends, consider using a more powerful blower. For
the most efficient air flow exhaust, use a straight run or
as few elbows as possible.
Remote Blowers (VTR Series)
Depending on your preference and ducting situation,
these blowers can be mounted on the roof or exterior
wall of your home. An exterior installation may be
more appealing to reduce noise in the kitchen.
Inline Blowers (VTI Series)
To minimize noise in the kitchen, these blowers are
mounted along the duct line anywhere between the
kitchen and the exterior wall. If you have easy access
to your duct line (in an attic, for example), this may be
an appealing option.
You should also consider the cooking space and cooking style of your client.
• More demanding cooks usually require more exhaust capacity to handle
moisture generated by boiling large pots of water or the grease and smoke
resulting from grilling or frying. This cooking style could require a hood or
downdraft system with airflow of 600 to 1,300 CFM.
• For those who are used to preparing quick meals in a relatively small
kitchen, a hood with 400 to 600 CFM may be adequate ventilation for the
cooking space.
• If the cooking surface is in a peninsula or island, a larger capacity hood can
provide better capture when there are cross currents and when the hood
needs to be mounted higher. Downdraft ventilation systems are also a
good alternative.
VENTILATION — ISLAND HOODS
ISLAND HOODS
PLANNING INFORMATION
• High heat cooking or aromatic foods may require additional CFM.
Increasing capture area by 3" on each side is also a recommended way to
address this issue.
LENGTH AND SIZE OF DUCTWORK
Do not use flexible duct; it creates back pressure / air turbulence and
reduces performance.
Straight runs and gradual turns are best. Use the shortest route with the
fewest turns possible.
Proper performance is dependent upon proper ducting. Use a qualified and
trained installer. Local building codes may require the use of make-up air
systems when using ducted ventilation systems greater than specified CFM of
air movement. The specified CFM varies from locale to locale. Consult your
HVAC professional for specific requirements in your area.
If using a 10" duct, Thermador recommends not exceeding 50 feet of duct.
Transitions, elbows and wall or roof caps are all factors that will add more
static pressure, therefore increasing your equivalent duct run.
WARRANTY
Limited warranty parts and labor (2 year)
See page 310 for additional warranty details.
1.800.735.4328 | THERMADOR.COM
175
VENTILATION
LOW PROFILE ISLAND HOOD (42"/48")
HPIN42HS / HPIN48HS
HPIN42HS / HPIN48HS
PERFORMANCE
- Three fan speeds
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Dishwasher-safe frameless filters with stainless steel covers
- Filter systems are highly efficient at capturing grease
- Powerfully Quiet® ventilation systems
- Vertical ducting direction
- 6" round duct size
- Blowers sold separately
PROFESSIONAL
HPIN42HS – 42-Inch
HPIN48HS – 48-Inch
DESIGN
- Sleek appearance does not obstruct views beyond the kitchen
- Chiseled design for a seamless integration into any kitchen
- Halogen lighting spotlights your best recipes
- Brushed stainless steel finish
- Stainless steel control buttons
SPECIFICATIONS
Available Hood Widths
42" / 48"
Blower
Sold Separately —
See Blower Options Table
Duct Size at Discharge
6" Round
Ducting Direction
Vertical
Ceiling Heights
8' 2" ft. to 9 ft.*
Dishwasher-safe Filters
Stainless Steel Filter
Halogen Lighting
12 Volt, 20 Watt Max.,
G-4 Base, Included
4 Bulbs
Electrical
120V AC, 60 Hz
*For 30" clearance above cooktop, minimum 98" ceiling height required
176
HPIN42HS / HPIN48HS
INSTALLATION OPTIONS
Thermador Island Hoods may be installed above a
Thermador Cooktop to create a convenient cooking
center. Refer to the appropriate section for additional
specifications.
Hood installation height above a cooktop can vary.
To obtain the necessary installation height above
a Thermador Cooktop, consult the appliance‘s
installation manual.
HOOD DIMENSIONS
313/16"
417/16"
792
1052
Thermador Island Hoods are suspended from the
ceiling. These hoods are designed to be used for
vertical discharge. A blower must be purchased
separately.
VENTILATION — ISLAND HOODS
VENTILATION
LOW PROFILE ISLAND HOOD (42"/48")
BLOWER OPTIONS
REMOTE
VTR630D – 600 CFM
Use Roofplate RFPLT600
in roof-mount applications
VTR1030D – 1000 CFM
Use Roofplate RFPLT1000
in roof-mount applications
VTR1330E – 1300 CFM
Use Roofplate RFPLT1000
in roof-mount applications
313/16"
417/16"
792
1052
INLINE
VTI610D – 600 CFM
VTI1010D – 1000 CFM
See page 175 for further details.
­REMOTE BLOWER ACCESSORIES
REMOTE (Mounted to roof or external wall)
1000 and 1300 CFM Blowers will require transition from 6" to 10" ducting
VTR630D – 600 CFM
Roofplate RFPLT600
For use with Remote
Blower VTR630D
Roofplate RFPLT1000
For use with Remote Blowers
VTR1030D and VTR1330E
EXTNCB25
VTR1030D – 1000 CFM
VTR1330E – 1300 CFM
INLINE (Mounted between kitchen and external wall)
1000 and 1300 CFM Blowers will require transition from 6" to 10" ducting
VTI610D – 600 CFM
VTI1010D – 1000 CFM
25 ft. Blower Connector Cable for use with the following
Inline and Remote blowers: VTR630D, VTR1030D,
VTR1330E, VTI610D, VTI1010D
1.800.735.4328 | THERMADOR.COM
177
VENTILATION
LOW PROFILE ISLAND HOOD WITH BLOWER (42"/48")
HPIB42HS / HPIB48HS
HPIB42HS / HPIB48HS
PERFORMANCE
- 600 CFM Integrated Blower included
- Recirculation possible with kit RECIRISL
- Three fan speeds
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Dishwasher-safe frameless filters with stainless steel covers
- Filter systems are highly efficient at capturing grease
- Powerfully Quiet® ventilation systems
- 6" Round duct size
- Vertical ducting direction
- All-in-one solution with an integrated blower included
- Hood includes filters, backdraft damper and transition
- Replacement charcoal filters available (CHFILISL)
MASTERPIECE®
HPIB42HS – 42-Inch
HPIB48HS – 48-Inch
DESIGN
SPECIFICATIONS
Available Hood Widths
42" / 48"
Blower
600 CFM Blower Included
Duct Size at Discharge
6" Round
Ducting Direction
Vertical
Ceiling Heights
8' 2" ft. to 9 ft.
Dishwasher-safe Filters
Stainless Steel Filter
Halogen Lighting
12 Volt, 20 Watt Max.,
G-4 Base, Included
4 Bulbs
Electrical
120V AC, 60 Hz
- Sleek appearance does not obstruct views beyond
the kitchen
- Brushed stainless steel finish
- Chiseled design for a seamless integration into any kitchen
- Halogen lighting spotlights your best recipes
- Stainless steel control buttons
ACCESSORIES
Island Hood Recirculation Kit
RECIRISL
- Stainless steel finish
- Perfect for hard to duct installations
- Use with 600 CFM blowers only
178
Replacement Charcoal Filters
CHFILISL
For use with Recirculation Kit RECIRISL
HPIB42HS / HPIB48HS
INSTALLATION OPTIONS
Thermador Island Hoods may be installed above a Thermador
Masterpiece® Cooktop to create a convenient cooking center.
Refer to the appropriate section for additional specifications.
Hood installation height above a cooktop can vary. To obtain the
necessary installation height above a Thermador Cooktop, consult
the appliance‘s installation manual.
EXTERNAL EXHAUST
313/16"
417/16"
792
1052
Thermador Island Hoods are suspended from the ceiling. These
hoods are designed to be used for vertical discharge. A 600 CFM
blower is included.
Thermador duct covers are designed for universal application.
VENTILATION — ISLAND HOODS
VENTILATION
LOW PROFILE ISLAND HOOD WITH BLOWER (42"/48")
In recirculation mode the louvers should be towards the ceiling for
exhaust air to escape in the kitchen.
In ducted mode, the same duct cover can be turned upside down
to hide away the louvers behind the lower duct cover piece.
BLOWER PRESSURE CURVES
HPIB42HS
313/16"
417/16"
792
1052
INTERNAL RECIRCULATION
313/16"
417/16"
792
1052
HPIB48HS
313/16"
417/16"
792
1052
NOTE: All measurements are made with 3 ft. straight duct,
90° bend and 1 ft. straight duct at exhaust. These are NOT
free blowing measurements.
1.800.735.4328 | THERMADOR.COM
179
VENTILATION
GLASS ISLAND HOOD WITH BLOWER (40")
HMIB40HS
HMIB40HS
PERFORMANCE
- 600 CFM Integrated Blower included
- An ideal solution for island cooktop installations
- Four fan speeds including one intensive level
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Dimmer lighting – for a soft lighting effect completely
adjustable by user
- Dishwasher-safe stainless steel mesh filters
- Filter systems are highly efficient at capturing grease
- Easy-to-operate control buttons
- Powerfully Quiet® ventilation systems
- Perfect fit for 30" & 36" cooktops
- 6" Round duct size
- Vertical ducting direction
MASTERPIECE®
HMIB40HS – 40-Inch
DESIGN
SPECIFICATIONS
Available Hood Width
40"
Blower
600 CFM Blower Included
Duct Size at Discharge
6" Round
Ducting Direction
Vertical
Ceiling Heights
8' 2" ft. to 9 ft.
Dishwasher-safe Filters
Stainless Steel Mesh Filter
Halogen Lighting
12 Volt, 20 Watt Max.,
G-4 Base, Included
4 Bulbs
Electrical
120V AC, 60 Hz
- Stunning combination of glass and stainless steel with
Masterpiece® design elements
- Chiseled design for a seamless integration into any kitchen
- Halogen lighting spotlights your best recipes
- Brushed stainless steel finish
- Premium electronic touch controls
ACCESSORIES
Island Hood Recirculation Kit
RECIRISL
- Stainless steel finish
- Perfect for hard to duct installations
- Use with 600 CFM blowers only
180
Replacement Charcoal Filters
CHFILISL
For use with Recirculation Kit RECIRISL
HMIB40HS
INSTALLATION OPTIONS
EXTERNAL EXHAUST
Thermador Island Hoods may be installed above a Thermador
Masterpiece® Cooktop to create a convenient cooking center.
Refer to the appropriate section for additional specifications.
Hood installation height above a cooktop can vary. To obtain
the necessary installation height above a Thermador Cooktop,
consult the appliance‘s installation manual.
313/16"
417/16"
792
1052
Thermador Island Hoods are suspended from the ceiling. These
hoods are designed to be used for vertical discharge. A 600
CFM blower is included.
VENTILATION — ISLAND
CUSTOMHOODS
INSERTS
VENTILATION
GLASS ISLAND HOOD WITH BLOWER (40")
BLOWER PRESSURE CURVES
HMIB40HS
INTERNAL RECIRCULATION
313/16"
417/16"
792
1052
NOTE: All measurements are made with 3 ft. straight duct,
90° bend and 1 ft. straight duct at exhaust. These are NOT
free blowing measurements.
1.800.735.4328 | THERMADOR.COM
181
182
MODELS SHOWN: VCI248DS MASTERPIECE® SERIES CUSTOM INSERT
VENTILATION — CUSTOM INSERTS
VENTILATION
CUSTOM
INSERTS
Use Thermador Custom Hood Inserts within custom hood applications to create a seamless
design with wall or island applications. These inserts efficiently and quietly remove odor
and steam with easy-to-access controls. Inserts are available for both professional and nonprofessional applications.
1.800.735.4328 | THERMADOR.COM
183
CUSTOM INSERTS
FEATURES & BENEFITS
REMOTE VENTILATION CONTROL
Remote controls for customized ventilation applications
are easy to use and have a sophisticated and professional
style. (photo represents VCI2REMFS)
MESH FILTERS
Aluminum mesh filters with
stainless steel frame maximize
grease capture without affecting
flow. (VCI230DS, VCI236DS,
VCI248DS only)
BAFFLE FILTERS
Stainless steel commercial-style
baffle filters maximize grease
capture and they’re dishwasher
safe for easy clean-up. (VCIN and
VCIB Series)
HALOGEN LIGHTS
Bright halogen lighting spotlights your best recipes.
CUSTOM HOOD INSERT
Specially designed for professional custom hood applications to create
a concealed ventilation system.
TIME-TO-CLEAN-FILTER LIGHT
Easy cleanup: All Thermador ventilation filters are dishwasher-safe, and
feature a built-in Time-to-Clean-Filter reminder light.
DELAYED SHUT-OFF
For the greatest efficiency, our ventilation models include delayed
shut-off to tackle lingering odors.
PUSH BUTTON CONTROLS
Concealed three-speed, push-button controls are easy to use.
BAFFLE FILTERS
The commercial style baffle filters make high-grease cooking easy.
The dishwasher-safe filters are stainless steel.
184
PLANNING INFORMATION
MODEL OPTIONS
Thermador Custom Hood Inserts are available for both
professional and non-professional applications. The Professional
Series Custom Hood Inserts are available in 36-inch, 48-inch, and
54-inch widths. The Masterpiece® Series Custom Hood Inserts are
available in 30-inch, 36-inch, and 48-inch widths.
ELECTRICAL SPECIFICATIONS
Be sure your Thermador Custom Insert is properly installed
and grounded by a qualified technician. Installation, electrical
connections and grounding must comply with all applicable
local codes.
MODEL
REQUIRED
CIRCUIT BREAKER
120V AC, 60 Hz
VCIN36JP, VCIB36JP,
VCIN48JP, VCIB48JP,
VCIN54JP, VCIB54JP,
VCI230DS, VCI236DS,
VCI248DS
15 Amp
INSTALLATION CONSIDERATIONS
CHOOSING THE RIGHT CFM
The information in this design guide provides
key features, product dimensions and installation
specifications. Before installing a Thermador Custom
Hood Insert, be sure to verify the dimensions and
electrical connections. Also, always consult with
the installation manual packed with the product for
complete details before installing.
The power of the cooktop or range, measured in BTU, is perhaps the most
important factor in determining CFM needs for a hood.
Professional Custom Series Hood Inserts are designed
for installation with all professional-style cooktops
and ranges. Masterpiece® Custom Series Hood Inserts
are designed for installation with non-professional
gas, electric or induction cooktops. Refer to the
appropriate section for additional specifications.
HOOD WIDTH
The hood width should be no less than the width of
the cooking surface. Where space is not restricted, a
wider hood can be used to increase your capture area.
DISTANCE FROM COOKING SURFACE
Proper mounting height is very important. If a hood
is mounted too low, it may be difficult to cook and be
unsafe. If a hood is mounted too high, performance
may be compromised. For optimal performance, the
distance from the cooking surface to the bottom of the
hood should be a minimum of 30", unless otherwise
noted. Please refer to the installation manual for each
hood and cooktop / range model for proper hood
mounting heights.
CHOOSING THE CORRECT BLOWER
A variety of interior and exterior blower options
Remote, Inline or Integrated are available for
Thermador’s Professional and Masterpiece® Series
Hoods. If the unit you have selected does not have
a blower included, one can be purchased separately.
Blower selection will vary based on the volume of air
that needs to be moved and the length and location
of the duct run. For long duct runs with multiple turns
and bends, consider using a more powerful blower.
Remote Blowers (VTR Series)
Depending on your preference and ducting situation,
these blowers can be mounted on the roof or exterior
wall of your home. An exterior installation may be
more appealing to reduce noise in the kitchen.
Inline Blowers (VTI series)
To minimize noise in the kitchen, these blowers are
mounted along the duct line anywhere between the
kitchen and the exterior wall. If you have easy access
to your duct line (in an attic, for example), this may be
an appealing option.
You should also consider the cooking space and cooking style of your client.
• More demanding cooks usually require more exhaust capacity to handle
moisture generated by boiling large pots of water or the grease and smoke
resulting from grilling or frying. This cooking style could require a hood or
downdraft system with airflow of 600 to 1,300 CFM.
• For those who are used to preparing quick meals in a relatively small
kitchen, a hood with 400 to 600 CFM may be adequate ventilation for the
cooking space.
• If the cooking surface is in a peninsula or island, a larger capacity hood can
provide better capture when there are cross currents and when the hood
needs to be mounted higher. Downdraft ventilation systems are also a
good alternative.
VENTILATION — CUSTOM INSERTS
CUSTOM INSERTS
PLANNING INFORMATION
• High heat cooking or aromatic foods may require additional CFM.
Increasing capture area by 3" on each side is also a recommended way to
address this issue.
LENGTH AND SIZE OF DUCTWORK
Do not use flexible duct; it creates back pressure / air turbulence and reduces
performance.
Straight runs and gradual turns are best. Use the shortest route with the
fewest turns possible.
Proper performance is dependent upon proper ducting. Use a qualified and
trained installer. Local building codes may require the use of make-up air
systems when using ducted ventilation systems greater than specified CFM of
air movement. The specified CFM varies from locale to locale. Consult your
HVAC professional for specific requirements in your area.
If using a 10" duct, Thermador recommends not exceeding 50 feet of duct.
Transitions, elbows and wall or roof caps are all factors that will add more
static pressure, therefore increasing your equivalent duct run.
INSTALLATION NOTE: Professional Rangetops and Ranges require that
minimum distances be maintained from the cooking surface to combustible
materials (i.e. a wood covering around the insert). These minimum distances
range from 30" to 36" and can vary from product to product and by
manufacturer. Refer to the installation manual of the rangetop or range
prior to the design and installation of the custom hood insert.
WARRANTY
Limited warranty parts and labor (2 year).
See page 310 for additional warranty details.
Integrated Blowers (VTN series)
These blowers are included and are integrated into
the hood or onto the downdraft unit at the time of
installation. This option allows you to select your ideal
hood with the exact power you require.
1.800.735.4328 | THERMADOR.COM
185
VENTILATION
CUSTOM INSERT (36"/48"/54")
VCIN36JP / VCIN48JP / VCIN54JP
VCIN36JP / VCIN48JP / VCIN54JP
PERFORMANCE
- Suitable for wall or island applications
- Three fan speeds
- Auto function senses heat from the cooking surface and adjusts
fan speeds
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Dishwasher-safe stainless steel baffle filters
- Filter systems are highly efficient at capturing grease
- Deep capture area allows for efficient capture of smoke and steam
- Powerfully Quiet® ventilation systems
- 10" duct outlet
PROFESSIONAL
VCIN36JP – 36-Inch
VCIN48JP – 48-Inch
VCIN54JP – 54-Inch
Custom hood insert for use within wall
or island custom hood applications
DESIGN
- Stainless steel button controls
- Halogen lighting spotlights your best recipes
- Remote control accessory (operation of controls only from remote)
SPECIFICATIONS
Available Hood Widths
36" / 48" / 54"
Blower
Sold Separately
See Blower Options Table
Duct Size at Discharge
10" Round
Ducting Direction
Vertical
Dishwasher-safe Filters
Stainless Steel Baffles
Halogen Lighting
120 V, 40 Watt Max.,
G-9 Base, Included
36"– 2 Bulbs
48" / 54"– 4 Bulbs
Electrical
120V AC, 60Hz
ROOF JACK, WALL CAP & TRANSITION
Roof Jack – RJ310
8-Inch Wall Cap – WC8
Wall Cap – WC310
10-Inch Wall Cap – WC10
Transition
39 3/4” (1010mm)
51 3/4” (1315mm)
ACCESSORIES
57 3/4” (1467mm)
Custom Hood Liners
5/8”
(16mm)
- Stainless
steel custom
hood liners to protect
the exterior base of
custom insert
LINER236 For 36" Insert VCIN36JP
LINER248 For 48" Insert VCIN48JP
LINER254 For 54" Insert VCIN54JP
23 7/8” (606mm)
20 5/8”
(524mm)
1 1/2”
(38mm)
32 7/16” (824mm)
44 7/16” (1129mm)
7
50 /16” (1281mm)
m) )
mm
5m
23 5/16” (592mm)
9
” (9
3/16
m)
300
39 3/16” (1 453m
1
51 3/16” (
57
186
Remote Control Panel
Stainless Steel Backsplash
VCI2REMKS
- Stainless steel finish
- Cable-connected to
blower and hood controls
(operation of controls
only from remote)
- Cable length 30 ft.
PA36JBS 36" wide
PA48JBS 48" wide
Cabinet Trim
11/16” (17mm)
1/16
7
5/16
8
3 5/16
84
13 1/16
332
VCIN36JP / VCIN48JP / VCIN54JP
INSTALLATION OPTIONS
Thermador Custom Hood Inserts within custom hood
applications create a seamless design with wall or island
applications.
Thermador Professional® Series Custom Hood Inserts may
be installed above a Thermador Professional® Cooktop or
Range to create a convenient cooking center. Refer to the
appropriate section for additional specifications.
Hood installation height above a cooktop can vary.
Professional Rangetops and Ranges require that minimum
distances be maintained from the cooking surface to
combustible materials (i.e. a wood covering around the
insert). These minimum distances range from 30" to 36" and
can vary from product to product and by manufacturer. Refer
to the installation manual of the rangetop or range prior to
the design and installation of the custom hood insert.
HOOD DIMENSIONS
(See installation manual
for complete planning
instructions)
12 13/16”
(325mm)
4 5/16”
(110mm)
21 3/4”
(553mm)
16 5/8
” (42
2mm) )
3 ” (82
32 3/8 (1127mm
44 /8” (1280mm)
3 ”
50 /8
2mm
)
20 5/8”
(524mm)
Cabinet Trim
11/16” (17mm)
CUTOUT DIMENSIONS
WHEN NOT USING A LINER
These hoods are designed to be used for vertical discharge.
A blower must be purchased separately.
32 15/16” (836mm)
44 15/16” (1141mm)
50 15/16” (1294mm)
5/8”
VENTILATION — CUSTOM INSERTS
VENTILATION
CUSTOM INSERT (36"/48"/54")
(16mm)
21 1/4” (540mm)
BLOWER OPTIONS (for VCIN__JP)
REMOTE (Mounted to roof or external wall)
REMOTE
VTR630D – 600 CFM
Use Roofplate RFPLT600 in
roof-mount applications
VTR1030D – 1000 CFM
Use Roofplate RFPLT1000
in roof-mount applications
VTR1330E – 1300 CFM
Use Roofplate RFPLT1000
in roof-mount applications
VTR630D – 600 CFM
VTR1030D – 1000 CFM
VTR1330E – 1300 CFM
INLINE
VTI610D – 600 CFM
VTI1010D – 1000 CFM
INTEGRATED
INLINE (Mounted between kitchen and external wall)
VTN630N– 600 CFM
VTN1030N – 1000 CFM
VTI610D – 600 CFM
VTI1010D – 1000 CFM
See page 185 for further details.
­REMOTE BLOWER ACCESSORIES
INTEGRATED (Mounted in hood)
VTN630N– 600 CFM
Roofplate RFPLT600
For use with Remote
Blower VTR630D
VTN1030N– 1000 CFM
Roofplate RFPLT1000
For use with Remote Blowers
VTR1030D and VTR1330E
EXTNCB25
25 ft. Blower Connector Cable for use with the following
Inline and Remote blowers: VTR630D, VTR1030D,
VTR1330E, VTI610D, VTI1010D
1.800.735.4328 | THERMADOR.COM
187
VENTILATION
CUSTOM INSERT WITH BLOWER (36"/48"/54")
VCIB36JP / VCIB48JP / VCIB54JP
VCIB36JP / VCIB48JP / VCIB54JP
PERFORMANCE
- Suitable for wall or island applications
- Three fan speeds
- Auto function senses heat from the cooking surface and adjusts
fan speeds
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Dishwasher-safe stainless steel baffle filters
- Filter systems are highly efficient at capturing grease
- Deep capture area allows for efficient capture of smoke and steam
- Powerfully Quiet® ventilation systems
- 10" duct outlet
PROFESSIONAL
VCIB36JP – 36-Inch
VCIB48JP – 48-Inch
VCIB54JP – 54-Inch
Custom hood insert for use within wall
or island custom hood applications
DESIGN
SPECIFICATIONS
Available Hood Widths
36" / 48" / 54"
Blower
Integrated 1000 CFM
Blower Included
Duct Size at Discharge
10" Round
Ducting Direction
Vertical
Dishwasher-safe Filters
Stainless Steel Baffles
Halogen Lighting
120 V, 40 Watt Max.,
G-9 Base, Included
36"– 2 Bulbs
48" / 54"– 4 Bulbs
Electrical
120V AC, 60Hz
- A unique all in one box solution that includes the hood, a 1,000 CFM
blower, liner, baffle filters, lights, transition and a back-draft damper
- Stainless steel button controls
- Halogen lighting spotlights your best recipes
- Remote control accessory (operation of controls only from remote)
ROOF JACK, WALL CAP & TRANSITION
Roof Jack – RJ310
8-Inch Wall Cap – WC8
Wall Cap – WC310
10-Inch Wall Cap – WC10
ACCESSORIES
Remote Control Panel
VCI2REMKS
- Stainless steel finish
- Cable-connected to
blower and hood controls
(operation of controls
only from remote)
- Cable length 30 ft.
1/16
7
188
5/16
8
Stainless Steel
Backsplash
PA36JBS 36" wide
PA48JBS 48" wide
3 5/16
84
13 1/16
332
Transition
VCIB36JP / VCIB48JP / VCIB54JP
INSTALLATION OPTIONS
Thermador Custom Hood Inserts within custom hood
applications create a seamless design with wall or island
applications.
Thermador Professional® Series Custom Hood Inserts
may be installed above a Thermador Professional®
Cooktop or Range to create a convenient cooking
center. Refer to the appropriate section for additional
specifications.
Hood installation height above a cooktop can vary.
Professional Rangetops and Ranges require that
minimum distances be maintained from the cooking
surface to combustible materials (i.e. a wood covering
around the insert). These minimum distances range from
30" to 36" and can vary from product to product and
by manufacturer. Refer to the installation manual of the
rangetop or range prior to the design and installation of
the custom hood insert.
These hoods are designed to be used for vertical
discharge.
HOOD DIMENSIONS
(See installation manual
for complete planning
instructions)
39 3/4” (1010mm)
12 13/16”
51 3/4” (1315mm)
(325mm)
57 3/4” (1467mm)
1 1/2”
(38mm)
4 1/2”
(114mm)
21 3/4”
(553mm)
11 1/8
” (283
mm)
16 5/8
” (422
mm)
20 5/8
” (52
4mm
)
)
95mm )
3 6” (9
39 3/16” (1300mm)
51 /1 (1453mm
3/16”
7
5
5/8”
(16mm)
et Trim
Cabin
7mm)
11/16” (1
23 5/16”
(592mm)
23 7/8”
39 3/16” (995mm)
51 3/16” (1300mm)
57 3/16” (1453mm)
(606mm)
VENTILATION — CUSTOM INSERTS
VENTILATION
CUSTOM INSERT WITH BLOWER (36"/48"/54")
20 5/8”
(524mm)
1 1/2”
(38mm)
32 7/16” (824mm)
44 7/16” (1129mm)
50 7/16” (1281mm)
m) )
mm
5m
23 5/16” (592mm)
BLOWER PRESSURE CURVES
9
” (9
3/16
m)
300
39 3/16” (1 453m
1
51 3/16” (
Cabinet Trim
11/16” (17mm)
57
VCIB__JP
CUTOUT DIMENSIONS WHEN USING A LINER
39 3/4” (1010mm)
51 3/4” (1315mm)
57 3/4”” (1467mm)
5/8”
(16mm)
23 7/8” (606mm)
NOTE: All measurements are made with 3 ft. straight
duct, 90° bend and 1 ft. straight duct at exhaust. These
are NOT free blowing measurements.
1.800.735.4328 | THERMADOR.COM
189
VENTILATION
CUSTOM INSERT (30"/36"/48")
VCI230DS / VCI236DS / VCI248DS
VCI230DS / VCI236DS / VCI248DS
PERFORMANCE
MASTERPIECE®
VCI230DS – 30-Inch
VCI236DS – 36-Inch
VCI248DS – 48-Inch
Custom hood insert for use within wall
or island custom hood applications
- Suitable for wall or island applications
- Three fan speeds
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Dishwasher-safe aluminum mesh filters
- Filter systems are highly efficient at capturing grease
- Deep capture area allows for efficient capture of smoke and steam
- Powerfully Quiet® ventilation systems
- 10" Round duct size
- Vertical ducting direction
- Blowers sold separately
- Choose from Inline and Remote Blowers
- Accessories include: Liner, Remote Control and Stainless Steel
Baffle Filters
DESIGN
- Stainless steel button controls
- Halogen lighting spotlights your best recipes
ROOF JACK & WALL CAP (For Integral and Inline blowers)
SPECIFICATIONS
Available Hood Widths
30" / 36" / 48"
Blower
Sold Separately —
See Blower Options Table
Duct Size at Discharge
10" Round
Ducting Direction
Vertical
Dishwasher-safe Filters
Mesh (Baffle filters sold
as an accessory)
Halogen Lighting
120 Volt, 20 Watt Max.,
G-4 Base, Included
30" / 36" – 2 Bulbs
48"– 4 Bulbs
Electrical
120V AC, 60Hz
Roof Jack – RJ310
8-Inch Wall Cap – WC8
Wall Cap – WC310
10-Inch Wall Cap – WC10
ACCESSORIES
Custom Hood Liners
Remote Control Panel
Baffle Filters
LINER30 for 30" Insert
LINER36 for 36" Insert
LINER48 for 48" Insert
VCI2REMFS
BAFFLT30 30" wide
BAFFLT36 36" wide
BAFFLT48 48" wide
- Stainless steel custom
hood liners to protect the
exterior base of custom insert
- Custom hood liner completes custom insert installation
190
- Stainless steel finish
- Cable-connected to blower
and hood controls (operation
of controls only from remote)
- Cable length 13 ft.
- Stainless steel finish
- Unique low profile design maximizes
grease capture
- Dishwasher-safe for easy cleanup
VCI230DS / VCI236DS / VCI248DS
INSTALLATION OPTIONS
HOOD DIMENSIONS
Thermador Custom Hood Inserts within custom hood
applications create a seamless design with wall or island
applications.
Thermador Masterpiece Series Custom Hood Inserts
may be installed above Thermador Cooktops to create
a convenient cooking center. Refer to the appropriate
section for additional specifications.
Hood installation height above a cooktop can vary.
Cooktops require that minimum distances be maintained
from the cooking surface to combustible materials (i.e.
a wood covering around the insert). These minimum
distances range from 30" to 36" and can vary from
product to product and by manufacturer. Refer to the
installation manual of the rangetop or range prior to the
design and installation of the custom hood insert.
VENTILATION — CUSTOM
DOWNDRAFT
INSERTS
VENTILATION
CUSTOM INSERT (30"/36"/48")
These hoods are designed to be used for vertical
discharge. A blower must be purchased separately.
REMOTE (Mounted to roof or external wall)
BLOWER OPTIONS
REMOTE
VTR630D – 600 CFM
VTR630D – 600 CFM
Use Roofplate RFPLT600 in
roof-mount applications
VTR1030D – 1000 CFM
Use Roofplate RFPLT1000
in roof-mount applications
VTR1330E – 1300 CFM
Use Roofplate RFPLT1000
in roof-mount applications
VTR1030D – 1000 CFM
VTR1330E – 1300 CFM
INLINE
VTI610D – 600 CFM
INLINE (Mounted between kitchen and external wall)
VTI1010D* – 1000 CFM
INTEGRATED
VTI1010D* – 1000 CFM
VTI610D – 600 CFM
VTI1010D – 1000 CFM
Inline blower can be used
for an integrated solution
See pages 194 for further details.
*Please visit thermador.com for tips & hints on installation of VTI1010D as
an integrated solution
*Please refer to thermador.com for tips and hints on installation of VTI1010D as an integrated solution
­REMOTE BLOWER ACCESSORIES
Roofplate
RFPLT600
For use with
Remote Blower
VTR630D
1.800.735.4328 | THERMADOR.COM
Roofplate
RFPLT1000
For use with
Remote Blower
VTR1030D
EXTNCB25
25 ft. Blower Connector Cable for use
with the following Inline and Remote
blowers: VTR630D, VTR1030D, VTR1330E,
VTI610D, VTI1010D
191
192
MODELS SHOWN: UCVM36FS 36-INCH DOWNDRAFT WITH CIT365KM INDUCTION COOKTOP
VENTILATION — DOWNDRAFT
VENTILATION
DOWNDRAFT
If you prefer a concealed look, choose a Thermador Downdraft Ventilation Unit, which offers
space efficiency when a hood is not preferred. The full-face filter combines a filter with a splatter
shield in one easy-to-remove, dishwasher-safe element. Thermador invented the first retractable
downdraft, and was also the first to introduce a recirculation option for downdrafts — making
ventilation possible in any kitchen.
1.800.735.4328 | THERMADOR.COM
193
DOWNDRAFT
FEATURES & BENEFITS
PLANNING INFORMATION
MODEL OPTIONS
Thermador Downdraft Hoods are available in 30 and 36-inch
widths to fit your kitchen plans and are meticulously crafted for
both function and design. Be sure to reference the correct model
information in this design guide.
ELECTRICAL SPECIFICATIONS
Be sure your Thermador Downdraft Hood is properly installed
and grounded by a qualified technician. Installation, electrical
connections and grounding must comply with all applicable
local codes.
MODEL
REQUIRED CIRCUIT
BREAKER
120V AC, 60 Hz
UCVM30FS, UCVM36FS
15 Amp
INSTALLATION CONSIDERATIONS
FULL 13-INCH RISE
With an over 13-inch intake, the UCVM rises well above even the
tallest pans. This protects against splatters when cooking and provides
better performance in capturing steam and smoke — even from the
front burners.
DOWNDRAFT RECIRCULATION OPTION
Downdraft recirculation is now available for island or wall applications.
Combine the performance of the UCVM Downdraft with the odor- and
grease-capturing filters in the Recirculation Module for the perfect
ventilation combination for anywhere in your kitchen.
FULL-FACE FILTERS
Full-face filters combine a filter with a splatter shield in one easyto-remove, dishwasher-safe element. These filters maximize grease
capture without affecting airflow.
The information in this design guide provides key features,
product dimensions, cutouts and installation specifications.
Before installing a Thermador Downdraft Hood, be sure to verify
the cutout dimensions and electrical connections. Also, always
consult with the installation manual packed with the product for
complete details before installing.
Thermador Downdraft Hoods may be installed in a wall or island
behind a Thermador non-professional gas, electric or induction
cooktop to create a convenient cooking center. Refer to the
appropriate section for additional specifications.
HOOD WIDTH
Downdraft ventilation units should be the same width as the
cooking surfaces they are ventilating.
CHOOSING THE CORRECT BLOWER
A variety of interior and exterior blower options (Remote, Inline
or Integrated) are available for Thermador’s Downdraft Hoods.
If the unit you have selected does not have a blower, one can
be purchased separately. Blower selection will vary based on
the volume of air that needs to be moved and the length and
location of the duct run. For long duct runs with multiple turns
and bends, consider using a more powerful blower. For the most
efficient air flow exhaust, use a straight run or as few elbows
as possible.
Remote Blowers (VTR Series)
Depending on your preference and ducting situation, these
blowers can be mounted on the roof or exterior wall of your
home. An exterior installation may be more appealing to reduce
noise in the kitchen.
Inline Blowers (VTI series)
To minimize noise in the kitchen, these blowers are mounted
along the duct line anywhere between the kitchen and the
exterior wall. If you have easy access to your duct line (in an attic,
for example), this may be an appealing option.
Integrated Blowers (VTN series)
These blowers are purchased separately and integrated into the
hood or onto the downdraft unit at the time of installation. This
option allows you to select your ideal hood with the exact power
you require.
194
CHOOSING THE RIGHT CFM
The power of the cooktop, measured in BTU, is perhaps
the most important factor in determining CFM needs for
a hood.
You should also consider the cooking space and cooking
style of your client.
• More demanding cooks usually require more exhaust
capacity to handle moisture generated by boiling large
pots of water or the grease and smoke resulting from
grilling or frying. This cooking style could require a hood
or downdraft system with airflow of 600 to 1,300 CFM.
• For those who are used to preparing quick meals in a
relatively small kitchen, a hood with 600 CFM may be
adequate ventilation for the cooking space.
BLOWER OPTIONS
REMOTE
Requires CV2T6 or CV2T10 Transition
VTR630D – 600 CFM
Use Roofplate RFPLT600 in roof-mount applications
VTR1030D – 1000 CFM
Use Roofplate RFPLT1000 in roof-mount applications
INLINE
Requires CV2T6 or CV2T10 Transition
VTI610D – 600 CFM
VTI1010D – 1000 CFM
INTEGRATED
VTN600CV2C – 600 CFM
VENTILATION — DOWNDRAFT
DOWNDRAFT
FEATURES & BENEFITS
REMOTE (Mounted to roof or external wall)
• If the cooking surface is in a peninsula or island, a larger
capacity hood can provide better capture when there
are cross currents and when the hood needs to be
mounted higher. Downdraft ventilation systems are also
a good alternative.
VTR630D – 600 CFM
VTR1030D – 1000 CFM
• High heat cooking or aromatic foods may require
additional CFM. Increasing capture area by 3" on each
side is also a recommended way to address this issue.
LENGTH AND SIZE OF DUCTWORK
Do not use flexible duct; it creates back pressure / air
turbulence and reduces performance.
INLINE (Mounted between kitchen and external wall)
Straight runs and gradual turns are best. Use the shortest
route with the fewest turns possible.
VTI610D – 600 CFM
VTI1010D – 1000 CFM
Proper performance is dependent upon proper ducting.
Use a qualified and trained installer. Local building codes
may require the use of make-up air systems when using
ducted ventilation systems greater than specified CFM
of air movement. The specified CFM varies from locale
to locale. Consult your HVAC professional for specific
requirements in your area.
If using a 10" duct, Thermador recommends not
exceeding 50 feet of duct. Transitions, elbows and wall
or roof caps are all factors that will add more static
pressure, therefore increasing your equivalent duct run.
INTEGRATED (Mounted in hood)
VTN600CV2C – 600 CFM
WARRANTY
Limited warranty parts and labor (2 year)
See page 310 for additional warranty details.
­REMOTE BLOWER ACCESSORIES
Roofplate
RFPLT600
For use with
Remote Blower
VTR630D
1.800.735.4328 | THERMADOR.COM
Roofplate
RFPLT1000
For use with
Remote Blower
VTR1030D
EXTNCB25
25 ft. Blower Connector Cable for use
with the following Inline and Remote
blowers: VTR630D, VTR1030D, VTR1330E,
VTI610D, VTI1010D
195
VENTILATION
DOWNDRAFT (30"/36")
UCVM30FS / UCVM36FS
UCVM30FS / UCVM36FS
PERFORMANCE
- Suitable for wall or island applications
- Downdraft rises over 13" to capture steam from the tallest pots
- Downdraft recirculation possible with module RECIRC36DF
- Three fan speeds
- Dishwasher-safe full-face filters also act as a splatter shield
- Filter systems are highly efficient at capturing grease
- Powerfully Quiet® ventilation systems
- Blowers sold separately
- Choose from Inline, Remote or Integrated Blowers
MASTERPIECE®
UCVM30FS – 30-Inch
UCVM36FS – 36-Inch
DESIGN
- Brushed stainless steel finish
- Easy-to-operate control buttons
T
­ RANSITIONS
SPECIFICATIONS
Available Hood Widths
30" / 36"
Blower
Sold Separately —
See Blower Options Table
Duct Size at Discharge
6" Round
Ducting Direction
Down, Left or Right
Dishwasher-safe Filters
Full-Face Mesh
Electrical
120V AC, 60Hz
Transition piece required for installation of inline and remote
blowers — downdraft applications only
CV2T6
Transition piece required
for installation of 600 CFM
Inline and Remote Blowers
with 6" duct connections —
downdraft applications only
14 3/8"
15 1/8"
CV2T10
Improves overall
performance when installing
with Thermador’s 1,000 CFM
Inline or Remote Blowers
with 10" duct connections —
downdraft applications only
Ø 6"
6 3/4"
14 3/8"
14 7/16"
Ø 10"
11"
ACCESSORIES
196
Recirculation Kit
Replacement Charcoal Filters
RECIRC36DF
- Comes complete with 2 charcoal filters, 2 venting
grids, and ducting to transition to integrated
blower (blower sold separately)
- For toekick heights of 4" or taller
- Wall or island applications
- Easily mounts to integrated blower (VTN600CV2C)
under cooktop
- Toekick / socket can be vented in any direction
- Mounts to base of cabinet; recesses into toekick
- To be used only with Thermador Downdraft and
Integrated Blower
- Replacement filters are ordered as a service item
- Filters should be replaced twice a year
Sold separately as service item #291108
(For use with recirculation module)
UCVM30FS / UCVM36FS
INSTALLATION OPTIONS
CUTOUT DIMENSIONS (TOP VIEW)
The Thermador Downdraft Hood System is
available in 30-inch or 36-inch widths. It is intended
for installation with Thermador non-professional
gas, electric or induction cooktops only.
36 7/8"
30 7/8"
A Recirculation Kit (RECIRC36DF) can be
purchased separately and used in conjunction with
the Integral Blower if ducting to the outside is not
a viable option. Refer to the appropriate section
for additional specifications.
These hoods are designed to be used for side or
downward discharge.
WARMING DRAWERS
VENTILATION
— DOWNDRAFT
VENTILATION
DOWNDRAFT (30"/36")
36 7/8"
(936 mm)
30 7/8"
(784 mm)
36 7/8"
30 7/8"
36 7/8"
30 7/8"
1.800.735.4328 | THERMADOR.COM
197
EXPERIENCE
THERMADOR
®
Thermador is committed to giving you an enjoyable,
creative and rewarding cooking experience. Whether you
would like to research our products, watch a video of our
chef searing the perfect scallop, or have questions on the
use and care of your product, simply browse our online
resource library at thermador.com
CONNECT WITH US
thermador.com/blog
facebook.com
twitter.com/thermador
youtube.com/thermadorhome
pinterest.com/thermador
instagram.com/thermadorhome
VISIT THE ABOVE SITES TO SHARE PHOTOS OF
YOUR NEW KITCHEN AND CREATIVE DISHES.
TAKE US WITH YOU
Visit the App Store™ or Google Play™ to
KITC
& PLAHEN DESIG
NNIN
G GUN
IDE
download our Innovations app, including
VOLU
ME 4
the Thermador Kitchen Ideas & Lookbook
and the Thermador Kitchen Design and
Planning Guide.
CUSTOMER SERVICE
ME
VOLU
For dedicated customer service
3
S
ION
VAT KS
NO OO E 3
L INREAL CVOLUM
A
E
R OR
F
®
on any Thermador product,
please call: 1-800-735-4328 or
contact us at thermador.com
1 800
735
8
432
OM
RES
DOR.C R.CA
HTS
MA
RIG
DO
. ALL
THER
MA
ION
RAT
USA
THER
DA
CORPO
CES
CANA
ED.
ERV
LIAN
APP
HOME 1/14
14 BSH 251 MG
©20
D-0
#13-TH
App Store is a trademark of Apple Inc.; Google Play is a trademark of Google Inc
1 800 735 4328
USA THERMADOR.COM
CANADA THERMADOR.CA
©2014 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED.
13-THD-0250 11/14 MC MG
Download PDF

advertising