Thermador MD24JS Spec Sheet

Thermador MD24JS Spec Sheet
MD24JS
BUILT-IN MICROWAVE DRAWER
MASTERPIECE® & PROFESSIONAL SERIES
GENERAL PROPERTIES
Cavity Color
White
Max. Microwave Power (W)
950 W
CAPACITY
Cavity Capacity (cu. ft.)
1.2 cu. ft.
Turntable Diameter (in.)
N/A
TECHNICAL DETAILS
FEATURES & BENEFITS
- Spacious 1.2 cu. ft. Interior fits a 20 oz. cup or a 13" x 9" pan
Watts (W)
1,500 W
Circuit Breaker (A)
15 A
Volts (V)
120 V
Frequency (Hz)
60 Hz
Plug Type
120V-3 Prong
Power Cord Length (in.)
48"
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (HxWxD) (in.)
16 5/16" x 23 7/8" x
23 3/8"
-S
ensor cooking programs measure humidity and adjust cooking
level and cooking time
Required Cutout Size (HxWxD) (in.)
14 13/16" x 22 1/8" x
23 1/2"
- Touch "open" and "close"
Net Weight (Lbs)
81 lbs
- Perfect flush installation and hidden vent
ACCESSORIES (INCLUDED)
- 950 watts microwave power and 10 power levels
N/A
WARRANTY
Limited Warranty, Entire Appliance, Parts and
Labor
Page 1 of 3
2 Year
MD24JS
BUILT-IN MICROWAVE DRAWER
MASTERPIECE® & PROFESSIONAL SERIES
PRODUCT DIMENSIONS
Page 2 of 3
MD24JS
BUILT-IN MICROWAVE DRAWER
MASTERPIECE® & PROFESSIONAL SERIES
STANDARD INSTALLATION
3 1/2 " (89 mm)
1 1/2 " (38 mm)
6" (152 mm)
4" (102 mm)
36"
(914 mm)
7 /8 "
(22 mm)
overlap
**
5" (127mm)
14 5 /8 "
(372 mm)
Frontview cut out
*
7 /8 "
(22 mm)
overlap
1 7 /16 "
(36 mm)
overlap
***
22 1/8 "
(562 mm)
23 1/2 "
(597 mm)
/ "
(2 mm)
overlap
1 16
24"
(610 mm)
1 /2 "
(13 mm)
visible
area
14 13 /16 "
(376 mm)
* Suggested location of electrical outlet
** Anti-Tip Block
*** Base should support up to 100 lbs
FLUSH INSTALLATION
These warranties give you specific legal rights and you may have other rights that vary from state to state. Full warranty and limited warranty from date of installation. For complete warranty
details, refer to your Use & Care manual, or ask your dealer.
Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation
engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model
number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada.
Thermador is not responsible for products that are transported from the U.S. for use in Canada.
1 800 735 4328 | USA THERMADOR.COM | CANADA THERMADOR.CA | ©2015 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED.
Page 3 of 3
04 / 15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement