LG STUDIO | LSWS300BD | Specifications Sheet | LG Studio LSWS300BD Specifications Sheet

LG Studio LSWS300BD Specifications Sheet
HOME APPLIANCES
LG STUDIO
LSWS307ST / LSWS300BD
4.7 cu. ft. Single Wall Oven
KEY FEATURES
Pro-Style Knob Control Design
4.7 cu.ft Oven
EasyClean®
Self-Cleaning
Wi-Fi Connectivity
2 Heavy Duty Racks with 1 Gliding Rack
PRODUCT FEATURES
2 Year Limited Warranty
SUMMARY
Type
Oven Capacity (cu. ft.)
Color
OVEN FEATURES
Capacity (cu.ft)
EasyClean®
Self Clean
Variable cleaning time
Variable broil
Broil element
Broil element pass
Bake element
Bake element type
# of rack position
12 hrs. shut-off
- # of light
Convection conversion
-Convection element
Proof
Variable warm
Wi-fi
DIMENSIONS / CLEARANCES / WEIGHT
Product (W x H x D)
Cut-out (W x H x D)
Packing (W x H x D)
Product Weight (lbs)
Shipping Weight (lbs)
Single Wall Oven
4.7
Stainless Steel, Black Stainless Steel
4.7
Yes
Yes
Yes (3,4,5 hrs)
Yes (Full, Center / High, Med, Low)
2,500 watts inner /1,500 watts outer
8
2,500 watts
Hidden (8 pass)
5
Yes
3 (Halogen Lamp - 3 dimension lighting)
Yes
Yes (2,000 watts)
Yes
Yes (High, Med, Low)
Yes
POWER/RATINGS
Amp at 240V
kW at 240V
Requirements
APPEARANCE
All Available Colors
Handle/Knobs
Knobs
Scratch Resistant
PrintProof Finish™
ACCESSORIES
Broiler pan
Griddle
Meat probe
Heavy Duty Rack
Gliding Rack
LIMITED WARRANTY
Parts & Labor
UPC CODES
LSWS307ST (Stainless Steel)
LSWS300BD (Black Stainless Steel)
4.1 KW
120/240 VAC,120/208 VAC
17.3A
Stainless Steel, Black Stainless Steel
LSWS307ST: Stainless Steel Finish (AIuminum)
LSWS300BD: Black Stainless Steel Finish (AIuminum)
Pro-Style Knob Control Design
Yes (Black Stainless Only)
Yes (Black Stainless Only)
1
1
1
2
1
2 Years Parts and Labor
048232338485
048232338652
29-3/4" x 29-5/16" x 24-3/8"
28-1/2" x 29" x 23-1/2"
33" x 30" x 34"
Approx. 71.2 kg (157lbs)
Approx. 81.2 kg (179lbs)
© 2018 LG Electronics USA, Inc. All rights reserved. "LG Life’s Good" is a registered trademark of LG Corp. All other product and brand names are trademarks or registered trademarks of their respective owners. Design, features and specifications are subject to
change without notice. Non-metric weights and measurements are approximate. Some features may require Internet access. Content and services may vary by product and are subject to change without notice. 8/7/18
HOME APPLIANCES
LG STUDIO
LSWS307ST / LSWS300BD
4.7 cu. ft. Single Wall Oven
PRODUCT DIMENSIONS
27 3/8”
29-3/4”
(69.5 cm)
IMPORTANT
QUICK INSTALL & CLEARANCES
For full installation directions/clearances please refer to
the corresponding User Manual and Installation Guide.
w/o handle
24 1/2”
w handle
27”
The first step of the installation is measure the
current cutout dimensions and compare them to the
cutout dimensions shown below. Little or no cabinet
work may be necessary.
DIMENSIONS/CLEARANCES
Product (W x H x D)
Cut-out (W x H x D)
Shipping Carton (W x H x D)
POWER/RATINGS
Amp at 240V
kW at 240V
Requirements
29-3/4" x 29-5/16" x 24-3/8"
28-1/2" x 29" x 23-1/2"
33" x 30" x 34"
29 5/16”
29-5/16”
(74.5 cm)
28 7/8”
29-5/16”
(73.3 cm)
4.1 KW
120/240 VAC,120/208 VAC
17.3A
29 3/4”
29-3/4”
(75.5 cm)
IMPORTANT NOTES
•
•
•
•
•
•
The cabinet base platform must be able to support 190lbs (86kg). If the cabinet
does not have a solid bottom, two braces or runners must be installed level with
the bottom of the cutout to support the weight of the oven. Make sure the base
is level and the front of the cabinet is square. If the cabinet base is not level, the
oven glides will tend to slide out when opening the door.
If marks, blemishes or the cutout opening are visible above the installed oven, it
may be necessary to add wood shims under the runners and front trim until the
marks or opening are covered.
If the cabinet does not have a front frame and the sides are less than 3/4” (1.9
cm) thick, shim both sides equally to establish the cutout width.
The junction box must be flush with the rear wall of the cabinet as shown below.
Allow at least a 23” clearance for the door depth when it is open.
Kitchen cabinets in contact with the oven must be heat resistant up to 194°F
(90°C), and fronts of nearby units up to at least 158°F (70°C).
23 3/8”
24-3/8”
(59.3 cm)
CUTOUT DIMENSIONS
30”
29-3/4”
Allow 1”
minimum for
overlap of oven
28 1/2” Min.
28 5/8” Max.
5”
Conduit
66 15/16”
Junction Box
Location
8”
51-15/16”
Allow 1”
minimum for
overlap of oven
51 13/16” Min.
51 15/16” Max.
47”
23”
23 1/2”
23-1/2”
Minimum cutout location from or 12”
•
•
•
•
•
Cabinet Width
Recommended
Minimum Cutout
Location from Floor
Cutout Depth
Cutout Width
Cutout Height
29-3/4”
12”
23-1/2”
28- 1/2”
51-15/16”
© 2018 LG Electronics USA, Inc. All rights reserved. "LG Life’s Good" is a registered trademark of LG Corp. All other product and brand names are trademarks or registered trademarks of their respective owners. Design, features and specifications are subject to
change without notice. Non-metric weights and measurements are approximate. Some features may require Internet access. Content and services may vary by product and are subject to change without notice. 8/7/18
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising