Bertazzoni | DW24XT | DW24XT Specifications sheet | Bertazzoni DW24XT DW24XT Specifications sheet

DW24XT
DISHWASHER 24” STAINLESS PANEL
XT MODEL
PRODUCT FEATURES
Style
Stainless steel panel installed
Interior finish
Stainless steel tub
User interface
Concealed electronic touch interface
Sound insulation
45 db(A)
Racks
3 with height-adjustable middle rack
and flexible top drawer
Place settings
16
Wash cycles
6 – Normal, Heavy, Auto, Quick, Rinse,
ECO
Wash options
5 – Power Zone, Extra Dry, Sani Boost, Hi
Temp, Delay Start
Drying system
Turbo drying
Filter
Triple-stage filter
Food disposer
Yes
Sprayer arms
3 + power zone sprayer
Lighting
LED
TECHNICAL SPECIFICATIONS
Voltage, Frequency, Amps
120V 60Hz - 8.5 Amps 975W
EnergyStar
Yes 237 kWh/yr
Power connection
Direct wiring, no cord
Water connection
Min. 3/8” copper pipe with accessible
shut-off valve
Certification
CSA
Warranty
2 years parts & labor
ACCESSORIES
Super-quiet performance 45dB(A)
PROHK24DW
Handle kit 24" dishwasher XV/XT
PROFESSIONAL SERIES
MASHK24DW
Handle kit 24" dishwasher XV/XT
MASTER SERIES
HERHK24DW
Handle kit 24" dishwasher XV/XT
HERITAGE SERIES
Flexible and height-adjustable third rack with dedicated
shower sprayer. Ideal for flatware, silverware and smaller
items. Each side of the upper rack can be folded to
accommodate extra-tall items in the middle drawer
6 washing programs, 5 washing options and turbo drying
ensure a customizable and always effective wash program
Power zone: Additional high-pressure sprayer arm for hard to
remove deposits
Sani-Boost option elevates washing temperature to 158F for
perfect and sanitized cleaning
2 LED surround lights to facilitate loading and unloading
Dual pump system with food disposer and triple-stage filter
ensure maximum removal of dirt residues from washing
water
Energy Star compliant
Choose Professional, Master or Heritage Series handle kit to
match your cooking appliances
DW24XT+PROHK24DW
DW24XT+MASHK24DW
DW24XT+HERHK24DW
www.bertazzoni.com
DW24XT
DISHWASHER 24” STAINLESS PANEL
XT MODEL
SIDE
FRONT
BACK
WATER LINES:
ELECTRICAL LINES
Install water lines on either side, rear, or
floor of shaded area. Line may pass through
same hole as electrical cable and drain hose.
If power cord with plug is used, water line
MUST NOT pass through power cord hole.
Install electrical line entry on either side, rear,
or floor of shaded area. Must be connected to
individual properly grounded circuit (with 15 –
20 A circuit breaker). Line must have 2 wires
with a ground
DRAIN REQUIREMENTS:
AIR GAP / HIGH DRAIN LOOP:
Follow local codes & ordinances. Drain hose cannot exceed 10’ distance
to drain line.
Install a waste line with an air gap (not supplied) or high drain loop to
prevent backflow. High drain loop must be min 32” above floor. Air gap
must be used if waste tee or disposer connection is less than 18” above
floor.
www.bertazzoni.com
Download PDF

advertising