Miele | 36160301USA | Merging Kits | Miele 38191301USA Merging Kits

Miele 38191301USA Merging Kits
MasterCool Refrigeration
Side-by-Side Merging Combinations
For Vi Models
8mieleusa.com
Side-by-Side Merging Kit
KSK 1002
en
This merging kit should be used for
side-by-side installation of the following
models:
en
Side-by-side
. . . with partition
. . . without partition
The minimum thickness of the partition
is 5/8" (16 mm).
If there is a partition with a thickness
from 5/8" (16 mm) to 6 5/16" (160 mm)
between the adjacent appliances, then
each appliance should be individually
installed within its own niche using the
mounting accessories included.
– K 18x1 Vi, K 19x1 Vi,
K 18x3 Vi, K 19x3 Vi
– F 14x1 Vi, F 18x1 Vi, F 19x1 Vi
F 14x3 Vi, F 18x3 Vi, F 19x3 Vi
– KF 18x1 Vi, KF 19x1 Vi,
KF 18x3 Vi, KF 19x3 Vi
– KWT 16x1 Vi, KWT 16x3 Vi
If the appliances are installed directly
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
In this case, you will only need the
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
4
3
Page 2 of 7
Product and Cut-out Dimensions
48” Side-by-Side Combination
F14X3 & K18X3
FOR FLUSH INSTALLATION
25" m
in.*
4"
29 3/
4"
84"
17 3/
24 5/
8"
M
USTO
PT C S
E
C
S AC
NEL
UNIT ONT PA
s
FR
detail
s for
e
il
f
c
e
al sp
dividu
in
e
e
S
O
E - 5 foot - 120 Volt - 15 Amp 3-wire molded plug power
supply connects lower left rear
O - One (1)Standard NEMA 5-15 Duplex Outlet - locate
less than 9" above finished floor
Notes
• KSK1002 Merging kit must be used when
combining units
• All Installations must be done in accordance
with local codes
• Sides of adjoining cabinets should be filled
(flush to frame) to insure proper fit and finish
• For Proud Installation — please adjust accordingly
1 1/8
"
4 1/8
"
2" - 8 3/8"
Location Codes
10 1/4
"
6 5/8" - 8 1/2"
E
83 1/2" - 85 3/8"
48"
*Depth assumes a 3/4" panel, please adjust according
to custom panel thickness
Page 3 of 7
Product and Cut-out Dimensions
54” Side-by-Side Combination
F14X3 & K19X3
FOR FLUSH INSTALLATION
25" m
in.*
4"
35 3/
4"
84"
17 3/
24 5/
8"
TOM
CUS
EPT LS
C
C
SA
NE
UNIT ONT PA
FR
tails
for de
s
e
il
f
ec
al sp
dividu
in
e
e
S
O
10 1/
4"
Location Codes
E - 5 foot - 120 Volt - 15 Amp 3-wire molded plug power
supply connects lower left rear
O - One (1)Standard NEMA 5-15 Duplex Outlet - locate
less than 9" above finished floor
4 1/8
"
6 5/8" - 8 1/2"
1 1/8
"
2" - 8 3/8"
E
83 1/2" - 85 3/8"
54"
Notes
• KSK1002 Merging kit must be used when
combining units
• All Installations must be done in accordance
with local codes
• Sides of adjoining cabinets should be filled
(flush to frame) to insure proper fit and finish
• For Proud Installation — please adjust accordingly
*Depth assumes a 3/4" panel, please adjust according
to custom panel thickness
Page 4 of 7
Product and Cut-out Dimensions
60” Side-by-Side Combination
F18X3 & K18X3
FOR FLUSH INSTALLATION
25" m
in.*
4"
29 3/
4"
84"
29 3/
24 5/
8"
M
USTO
PT C S
E
C
S AC
NEL
UNIT ONT PA
FR
tails
or de
f
s
e
il
cf
l spe
ividua
d
in
See
O
Location Codes
E - 5 foot - 120 Volt - 15 Amp 3-wire molded plug power
supply connects lower left rear
O - One (1)Standard NEMA 5-15 Duplex Outlet - locate
less than 9" above finished floor
andle
el/h
(Pan
sho
ded.)
t inclu
no
wn is
10 1/
4"
1 1/8
"
3 1/2" - 5 3/8"
E
83 1/2" - 85 3/8"
60"
Notes
• KSK1002 Merging kit must be used when
combining units
• All Installations must be done in accordance
with local codes
• Sides of adjoining cabinets should be filled
(flush to frame) to insure proper fit and finish
• For Proud Installation — please adjust accordingly
*Depth assumes a 3/4" panel, please adjust according
to custom panel thickness
Page 5 of 7
Product and Cut-out Dimensions
66” Side-by-Side Combination
F18X3 & K19X3
FOR FLUSH INSTALLATION
25" m
in.*
4"
35 3/
4"
84"
29 3/
24 5/
8"
TOM
CUS
EPT LS
C
C
SA
NE
UNIT ONT PA
FR
tails
for de
s
e
il
f
ec
al sp
dividu
in
e
Se
O
10 1/
4"
1 1/8
"
Location Codes
E - 5 foot - 120 Volt - 15 Amp 3-wire molded plug power
supply connects lower left rear
O - One (1)Standard NEMA 5-15 Duplex Outlet - locate
less than 9" above finished floor
ho
dle s
l/han
e
(Pan
ded.)
t inclu
no
wn is
3 1/2" - 5 3/8"
E
83 1/2" - 85 3/8"
66"
Notes
• KSK1002 Merging kit must be used when
combining units
• All Installations must be done in accordance
with local codes
• Sides of adjoining cabinets should be filled
(flush to frame) to insure proper fit and finish
• For Proud Installation — please adjust accordingly
*Depth assumes a 3/4" panel, please adjust according
to custom panel thickness
Page 6 of 7
Product and Cut-out Dimensions
72” Side-by-Side Combination
F19X3 & K19X3
FOR FLUSH INSTALLATION
25" m
in.*
4"
35 3/
4"
84"
35 3/
24 5/
8"
M
USTO
PT C S
E
C
S AC
NEL
UNIT ONT PA
ils
FR
r deta
iles fo
f
c
e
al sp
dividu
See in
O
E - 5 foot - 120 Volt - 15 Amp 3-wire molded plug power
supply connects lower left rear
O - One (1)Standard NEMA 5-15 Duplex Outlet - locate
less than 9" above finished floor
sho
10 1/
4"
1 1/8
"
Location Codes
andle
el/h
(Pan
ded.)
t inclu
no
wn is
3 1/2" - 5 3/8"
E
83 1/2" - 85 3/8"
72"
Notes
• KSK1002 Merging kit must be used when
combining units
• All Installations must be done in accordance
with local codes
• Sides of adjoining cabinets should be filled
(flush to frame) to insure proper fit and finish
• For Proud Installation — please adjust accordingly
*Depth assumes a 3/4" panel, please adjust according
to custom panel thickness
Page 7 of 7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising