Liebherr | CS1360 | Design Guide | Liebherr CS1360 Design Guide

Design Guide
Freestanding / Semi Built-In Models 24" and 48"
Release 11 2015
Welcome
Liebherr is one of the World’s leading Manufacturers of Premium Refrigeration. For more than 60 years,
Liebherr has specialized in developing and manufacturing first class refrigerators and freezers as well as
wine cabinets. We focus on performance and efficiency as well as keeping food fresher longer.
Produced in Austria and Germany, Liebherr has a full line of premium models tailored specifically for the
North American marketplace to fit any design vision you have for your kitchen.
Our freestanding stainless models are sleek centerpieces that make a definite statement. Our built-in
models are perfect for designs that call for units that slide into cabinet surrounds. And our fully-integrated
models become one with your kitchen design, hidden seamlessly behind your custom cabinetry.
High quality materials, perfectly detailed finishes, precise electronic control systems, elite cooling components, variable speed compressors and the latest production processes ensure energy efficiency and
performance for years to come.
Our superior products offer premium quality, cutting edge design and innovative features that fit with your
busy lifestyle.
Introduction
LIEBHERR WARRANTY PLAN
FULL TWO YEAR WARRANTY - For two years from the date of original purchase, your Liebherr Warranty
covers all parts and labor to repair or replace any part of the product which proves to be defective in materials or workmanship.
FULL FIVE YEAR WARRANTY - For five years from the date of original purchase, your Liebherr Warranty
covers all parts and labor to repair or replace any components that prove to be defective in materials or
workmanship in the sealed system. The "Sealed System" means only the compressor, condenser, evaporator, drier and all connecting tubing.
LIMITED 6TH THROUGH 12TH YEAR WARRANTY - From the 6th through 12th year from the date of
original purchase, your Liebherr Warranty covers all parts that prove to be defective in materials or workmanship in the sealed system (parts only).
For Service and Parts in the U.S.:
PlusOne Solutions, Inc.
Customer Service
If your appliance is not working properly, or if the temperature display reads "F0" to "F9”, please call the
numbers listed below.
Give the fault number displayed, together with the
Type Designation,
Service Number and
Appliance Number (Serial Number)
from the model plate, to ensure prompt, accurate servicing. The model plate is located inside the appliance.
Leave the appliance door closed until the customer service technician arrives to minimize any further cold loss.
3501 Quadrangle Blvd, Suite 120
Orlando, FL 32817
1-866-LIEBHER or
1-866-543-2437
Toll Free:
Service-appliances.us@liebherr.com
www.liebherr-appliances.com
For Service and Parts in Canada:
Euro-Parts Canada
39822 Belgrave Road,
BELGRAVE, Ontario, N0G 1E0
Phone:
Fax:
Toll Free:
(519) 357-3320
(519) 357-1326
1-888-LIEBHER or
1-888-543-2437
www.euro-parts.ca
Need help?
For design related inquiries not addressed in this Design
Guide please email install.americas@liebherr.com
Contents
General Remarks
I. Safety Warnings.........................................................................................................................................
7
II. Electrical Requirements & Safety............................................................................................................
8
III. IceMaker (if equipped).............................................................................................................................
8
IV. Area Requirements...................................................................................................................................
9
V. Safety Regulations....................................................................................................................................
9
Freestanding/Semi Built In Models
24" and 48" Models: CS 1311 / CS 1360, SBS 26S1, CS 1200, CS 1350B.................................................
10
Unit Dimensions.........................................................................................................................................
14
Kitchen cabinet setup for the water filter...................................................................................................
15
Cabinet Opening Dimensions: CS 1311, CS 1360, CS 1200, CS 1350B..................................................
16
Cabinet Opening Dimensions: SBS 26S1..................................................................................................
17
Ventilation Requirements...........................................................................................................................
19
Top Door Hinge Clearance CS 13.. - SBS 26S1........................................................................................
20
Top Door Hinge Clearance CS1200...........................................................................................................
21
Door Swing Clearance CS 1200, CS 13.. - SBS 26S1..............................................................................
22
Accessories for Liebherr Freestanding - Semi Built In Appliances............................................................
23
General Remarks
I. Safety Warnings
PLEASE READ AND FOLLOW THESE INSTRUCTIONS
This design guide contains Warning and Caution statements. This information is important for safe and
efficient installation.
This design guide is not replacing the use and care manual which contains important information on how to use Liebherr appliances.
Always read and follow all Warning and Caution statements!
States a hazard that may cause serious injury or death if precautions are not followed.
Signals a situation where minor injury or product damage may occur if you do not follow instructions.
States a hazard will cause serious injury or death if precautions are not followed.
IMPORTANT
This highlights information that is especially relevant to a problem-free installation.
Make sure incoming voltage is the same as the unit rating.
To reduce the risk of fire, electric shock, or personal injury, the installation work and electrical wiring must be done by
a qualified electrician in accordance with all applicable codes and standards, including fire rated construction.
To the Installer
It is very important that the guidelines and instructions are followed in this design guide to ensure proper installation and operation of the unit. The Installation Guidelines section contains important information for making sure the
installation is correct. Read and understand all the information and installation guidelines in this manual before the
unit is installed.
It is also very important to know the Safety Information.
7
General Remarks
II. Electrical Requirements & Safety
III. IceMaker (if equipped)
Circuit has to be grounded and protected by a circuit
breaker or fuse.
Single installation:
Side-by-side installation:
• 115 volt
• 115 volt
• 60 hz
• 60 hz
• 15 amp
• 20 amp
The icemaker is located in the freezer compartment.
It must be connected to the water supply to function
properly. The appliance must be level for the icemaker to
function properly.
The water supply pressure requirements are different
based on whether or not the supplied Liebherr water filter
is installed. With the filter installed, the pressure must be
in the range of 40-90 psi (2.8-6.2 bar). Without the filter
installed the acceptable pressure range is 22-87 psi (1.5-6
bar).
Use a 1/4" OD copper line to connect the water supply to
the solenoid valve. This is not supplied with the refrigerator.
If you have hard water, we recommend you install a
water softener. Also, a filter must be installed if the water
contains solids such as sand. All equipment and devices
used to supply the water to the appliance must comply
with the current regulations for your geographical area.
We recommend using a dedicated circuit for each
appliance to prevent circuit overload and the chance of
interruption to the appliance.
The appliances are equipped with a three-prong
(grounding) polarized plug for protection against possible
shock hazards.
Comply with the National Electrical Code as well as local
codes and ordinances when installing the receptacle.
Safety Instructions and Warnings
Do not ground to a gas pipe. Check with a
qualified electrician if you are not sure the
appliance is properly grounded. Do not have
a fuse in the neutral or grounding circuit.
• Do not attach the water source while the appliance is
connected to an electrical outlet.
Electrocution hazard.
Electrical Grounding Required.
• Do not remove the round grounding prong
from the plug.
• Do not use a two-prong
grounding adapter.
• The connection to the water supply may only be made
by a trained and licensed plumber.
• Do not use an extension cord to connect
power to the unit.
• Do not use a power cord that is frayed or
damged.
• Do not use a power strip.
Failure to follow these instructions may
result in fire, electrical shock or death.
8
• A shut-off valve, must be installed between the hose
line and the main water supply so that the water supply can be stopped if necessary. Do not install the
shut-off valve behind the refrigeration unit.
• The water quality must comply with the drinking water
regulations for the geographical area where the appliance is located.
• The icemaker is designed exclusively to make ice
cubes in quantities needed by a household and may
only be operated with water appropriate for this purpose.
• All repairs and work on the icemaker may only be done
by customer service personnel or other trained personnel.
• The manufacturer cannot accept liability for damage
caused by equipment or water lines between the solenoid valve and the water supply.
General Remarks
IV. Area Requirements
V. Safety Regulations
Verify the following:
• Floors can support refrigerator’s weight plus approximately 1200 pounds (544 kg) of food weight. Not
all Liebherr products are designed for 1200 pounds
(544 kg) of food. Some units are smaller and total
weights may vary.
The appliance complies with UL250 and CAN/CSA
C22.2 No.63-93 and is designed to cool, freeze, store
food as well as make ice (if equipped). It is designed as a
household appliance.
• Finished kitchen floor height is level. Refrigerator must
be shimmed to the floor level, or levelled, to make
sure, air vents are not obstructed.
• Remove anything attached to the rear or side walls
that can obstruct refrigerator opening.
• Cutout dimensions are accurate.
• Electrical outlet is in correct location.
Do not install this unit next to any other refrigerator or
freezer except another Liebherr model. Liebherr models
are designed to allow side by side installation. They are
equipped with a heating system to eliminate condensation when units are installed side by side. Installing this
unit next to any other refrigerator or freezer can cause
condensation or cause damage to the Liebherr unit.
The appliance is set to operate within specific ambient
temperature limits according to its climate rating. These
temperature limits should not be exceeded. The correct climate rating for your appliance is indicated on the
model plate.
This is explained as follows:
Climate
Rating
Set for Ambient Temperatures of
SN
50°F to 90°F (10°C to 32°C)
N
61°F to 90°F (16°C to 32°C)
ST
61°F to 101°F (16°C to 38°C)
T
61°F to 110°F (16°C to 43°C)
SN-ST
SN-T
50°F to 101°F (10°C to 38°C)
50°F to 110°F (10°C to 43°C)
Refrigerant circuits are tested for leaks.
To protect the refrigerator from possible
damage, allow the appliance to stand 1/2 to
1 hour in place before turning the electricity
on. This allows the refrigerant and system
lubrication to reach equilibrium.
Blocking For Safety
The anti-tip brackets must be installed to prevent the
unit from tipping after it is installed.
9
Freestanding/Semi Built In Models
24" and 48" Models: CS 1311 / CS 1360, SBS 26S1, CS 1200, CS 1350B
24" and 48" Models: CS 1311 / CS 1360, SBS 26S1, CS 1200, CS 1350B
The unique design of Liebherr's freestanding models features fully stainless steel doors, and even stainless steel side
walls - a perfect combination of design and functionality. New Swing Line doors with bevelled edges are a particularly
elegant feature of this combination. Practical lever handles with integrated opening mechanisms make opening the
appliance almost effortless. The SoftSystem ensures that the door closes gently even when fully loaded.
NOTE
The doors of these models are Liebherr's Smartsteel . The sidewalls are not. Use only a damp cloth and / or mild
detergent to clean the Smartsteel doors. Abrasive or aggressive cleaners or cloths will damage the Smartsteel finish.
CS 1311
Energy Star:certified
Energy consumption p. a.:
420 kWh
Energy Supply:115V/60Hz/350W
Total capacity:
13 cu ft (369 L)
Refrigerator:
9.7 cu ft (275 L)
Freezer:
3.3 cu ft (94 L)
Climate Rating:SN-T
Door hinges:left/reversible
• Automatic refrigerator defrosting
• Automatic freezer compartment defrosting
• LED lighting for refrigerator
• Full extension vegetable drawers on telescopic rails
CS 1360
Energy Star:certified
Energy consumption p. a.:
420 kWh
Energy Supply:115V/60Hz/350W
Total capacity:
13 cu ft (369 L)
Refrigerator:
9.7 cu ft (275 L)
Freezer:
3.3 cu ft (94 L)
Ice cube capacity:
2.2 lbs./24h
Ice cube stock:
3.3 lbs.
Climate Rating:SN-T
Door hinges:right/reversible
• Automatic refrigerator defrosting
• Automatic freezer compartment defrosting
• Automatic IceMaker can be switched off
• LED lighting for refrigerator
• Full extension vegetable drawers on telescopic rails
10
Freestanding/Semi Built In Models
24" and 48" Models: CS 1311 / CS 1360, SBS 26S1, CS 1200, CS 1350B
SBS 26S1 (CS 1311 & CS 1360)
Energy Supply:
Total capacity:
Refrigerator:
Freezer:
Ice cube capacity:
Ice cube stock:
Climate Rating:
Door hinges:
115V/60Hz/700W
26 cu ft (738 L)
19.4 cu ft (550 L)
6.6 cu ft (188 L)
2.2 lbs./24h
3.3 lbs.
SN-T
left / right
• Automatic refrigerator defrosting
• Automatic freezer compartment defrosting
• Automatic IceMaker can be switched off
• LED lighting for refrigerator and freezer
• Full extension vegetable drawers on telescopic rails
11
Freestanding/Semi Built In Models
24" and 48" Models: CS 1311 / CS 1360, SBS 26S1, CS 1200, CS 1350B
NOTE
The doors of these models are Liebherr's Smartsteel . The sidewalls are not. Use only a damp cloth and / or mild
detergent to clean the Smartsteel doors. Abrasive or aggressive cleaners or cloths will damage the Smartsteel finish.
CS 1200
°C
Ventilation
9
7
5
3
1
-15
-18
-21
-25
-32
Energy Star:certified
Energy consumption p. a.:
416 kWh
Energy Supply:115V/60Hz/350W
Total capacity:
11.46 cu ft (325 L)
Refrigerator:
8.15 cu ft (231 L)
Freezer:
3.31 cu ft (94 L)
Climate Rating:SN-T
Door hinges:right/reversible
• Automatic refrigerator defrosting
• Automatic freezer compartment defrosting
• LED lighting for refrigerator
CS 1350B
Energy Star:certified
Energy consumption p. a.:
420 kWh/a
Energy Supply:115V/60Hz/350W
Total capacity:
13.02 cu ft (369 L)
Refrigerator:
9.71 cu ft (275 L)
Freezer:
3.31 cu ft (94 L)
Climate Rating:SN-T
Door hinges:right/reversible
• Automatic refrigerator defrosting
• Automatic freezer compartment defrosting
• LED lighting for refrigerator
• Automatic IceMaker can be switched off
• Height-adjustable feet at front
• Changeable door gasket
12
Freestanding/Semi Built In Models
24" and 48" Models: CS 1311 / CS 1360, SBS 26S1, CS 1200, CS 1350B
13
Freestanding/Semi Built In Models
24" and 48" Models: CS 1311 / CS 1360, SBS 26S1, CS 1200, CS 1350B
Unit Dimensions
CS 1311, CS 1360, CS 1200, CS 1350B
(A)
2-7/32" (56.5 mm)
(B)
CS13.. : 79-3/16" (2011 mm)
CS12.. : 71-9/16" (1817 mm)
(C)
23-5/8" (600 mm)
(D)
25-3/16" (640 mm)
(E)
24-3/16" (614 mm)
(F)
24-13/16" (630 mm)
(G)
46-1/2" (1180 mm)
NOTE
Height dimension (B) represents the minimum height of
the appliance(s) as measured from the floor to top of the
door hinge cover. The height of the door hinge cover on
top of the appliance is 15/32". The height of the appliance can be increased by a maximum of 5/8" overall by
adjusting the leveling legs / rollers.
SBS 26S1 (CS 1311 & CS 1360)
14
(A)
2-7/32" (56.5 mm)
(B)
79-3/16" (2011 mm)
(C)
47-3/8" (1204 mm)
(D)
49" (1244 mm)
(E)
24-1/8" (613 mm)
(F)
24-3/4" (629 mm)
(G)
46-9/16" (1182 mm)
Freestanding/Semi Built In Models
24" and 48" Models: CS 1311 / CS 1360, SBS 26S1, CS 1200, CS 1350B
Kitchen cabinet setup for the water filter
To ensure optimum water quality for the production of
ice cubes (CS 1360 and CS 1350B) an external water
filter module is available as an accessory.
It should be installed near the appliance in the cabinet,
for example, in the adapter cabinet above the appliance.
To connect the filter to the appliance, it may be necessary to make an opening (C) in the floor of the adapter
cabinet through which the hoses will be routed. The
maximum length of the water hose is 98-7/16 ‘‘ (2.5 m).
The filter cover must be in stalled during assembly to
leave sufficient space around the filter module.
Maintain the dimensions shown in Fig. so that the filter
can be replaced and the cover can be removed.
(A) 13/16in (20mm)
(B) 3-15/16in (100mm)
(C) 1-3/16in. x 3/8in. ( 30mm x10mm)
(D) min. 4in (100mm)
15
Freestanding/Semi Built In Models
24" and 48" Models: CS 1311 / CS 1360, SBS 26S1, CS 1200, CS 1350B
Cabinet Opening Dimensions: CS 1311, CS 1360, CS 1200, CS 1350B
The appliance can be integrated into the kitchen units.
To adapt the appliance to the height of the row of kitchen
units, a suitable top cupboard can be fitted above the
appliance.
Unit Venting
DO NOT restrict the air flow. A cross-sectional air flow of
at least 31" square (200cm­²) must be provided. The opening can either be directly over the appliance or behind
of the cabinet on top of the unit (see ventilation requirements).
The CS models can be installed in standard 24" (609mm)
deep cabinets. You will only have to make sure that the
door swing clearance is enough. It is possible to push all
CS models to the rear wall of the cabinet without modification.
When installing the appliance next to a wall, a distance
on the hinge side of 1 13/32 inches (36 mm) minimum is
required between the appliance and the wall to allow for
the door handle projection when the door is open.
Minimum Cabinet Opening Dimensions:
(A)
(B)
(C)
(D)
3"
(76 mm)
16
23-7/8" (606 mm)
24" (609 mm)
85-7/8" (2182 mm)
CS 13.. 80" (2032 mm)*
CS 12.. 72-3/8" (1838 mm)*
*NOTE
The given cabinet opening height dimension is such that
it accommodates the ventilation requirements for the
appliance. If you will be bringing the cabinet above or
header of the opening down tight (no air space - refer to
the section 'Top Door Hinge Clearance' later in this Design Guide) to the top of the appliance for a built-in look
then you still must accommodate ventilation by some
other means. The warm air from behind the appliance
must be able to escape. Please refer to the section 'Ventilation Requirements' further on in this Design Guide.
Freestanding/Semi Built In Models
24" and 48" Models: CS 1311 / CS 1360, SBS 26S1, CS 1200, CS 1350B
Cabinet Opening Dimensions: SBS 26S1
The appliance can be integrated into
the kitchen units.
To adapt the appliance to the height
of the row of kitchen units, a suitable
top cupboard can be fitted above the
appliance.
Unit Venting
DO NOT restrict the air flow. A crosssectional air flow of at least 62" square
(400cm­²) must be provided. The
opening can either be directly over the
appliance or behind of the cabinet on
top of the unit (see ventilation requirements).
The SBS 26S1 model can be installed in standard 24" (609mm) deep
cabinets. You will only have to make
sure that the door swing clearance is
enough. It is possible to push the SBS
26S1 to the rear wall of the cabinet
without modification.
When installing the appliance next to
a wall, a distance on the hinge side of
1 13/32 inches (36 mm) minimum is
required between the appliance and
the wall to allow for the door handle
projection when the door is open.
Minimum Cabinet Opening Dimensions:
3"
(76 mm)
(A)
(B)
(C)
(D)
47-3/4" (1212 mm)
24" (609 mm)
85-7/8" (2182 mm)
CS 13.. 80" (2032 mm)*
CS 12.. 72-3/8" (1838 mm)*
*NOTE
The given cabinet opening height dimension is such that it accommodates
the ventilation requirements for the
appliance. If you will be bringing the
cabinet above or header of the opening down tight (no air space - refer to
the section 'Top Door Hinge Clearance' later in this Design Guide) to
the top of the appliance for a built-in
look then you still must accommodate
ventilation by some other means. The
warm air from behind the appliance
must be able to escape. Please refer
to the section 'Ventilation Requirements' further on in this Design Guide.
17
Freestanding/Semi Built In Models
The cabinet opening height is 84" when using the decorative grille. The decorative grille is deliverable as accessory and is not required for proper operation of the appliance. All ventilation requirements are handled through
the toe kick grille on the appliance and this decorative
grille is intended to be used as a filler for pre-existing 84"
openings.
See chapter „Accessories for Liebherr Freestanding Semi Built In Appliances“ page 23.
NOTE
The decorative upper grille attaches to the
cabinets / gables on either side of it and not to the
appliance itself nor any cabinet above.
IMPORTANT!
Do not attempt to fix or block the appliance into a custom opening. In the event of service, the appliance must
still be accessible to service personnel.
18
24" and 48" Models: CS 1311 / CS 1360, SBS 26S1, CS 1200, CS 1350B
Freestanding/Semi Built In Models
24" and 48" Models: CS 1311 / CS 1360, SBS 26S1, CS 1200, CS 1350B
Ventilation Requirements
This type of cabinet must be carefully constructed using
the correct dimensions and it must provide suitable ventilation to ensure proper appliance operation.
B - Side view
Kitchen Cabinet Airflow
The following ventilation dimensions must be observed:
Cabinet
There must be a ventilation space at least 31 in.² (200
cm²) per appliance at the airflow inlet (1) and at the airflow outlet (2).
Refrigerator
The top ventilation space can be directed in one of the
following ways:
A) Directly over the appliance (2) with a gap between the
ceiling of the unit and the cabinet.
B) Above the cabinet and below the ceiling (3).
C) Through a vent installed in a soffit (4).
A
B
NOTE
The appliance ships with bumpers on the back of it to
allow the appliance to be pushed up against the wall
behind it and still provide optimal air flow for ventilation.
C
The refrigerator is designed to allow proper air flow when
the appliance is installed up against the wall.
A minimum space of 1 1/2" (38mm) is required behind
any cabinet above the appliance if ventilating above that
cabinet.
IMPORTANT!
Do not block the toe kick ventilation grille with a molding.
Intake ventilation is just as important as exhaust ventilation. The appliance relies on natural convection to cool
the condenser mounted on the back. Improper ventilation will lead to performance issues, shorter lifespan of
the appliance and will likely void warranty coverage for
any service issues resulting from incorrect installation.
19
Freestanding/Semi Built In Models
24" and 48" Models: CS 1311 / CS 1360, SBS 26S1, CS 1200, CS 1350B
Top Door Hinge Clearance CS 13.. - SBS 26S1
When installing CS units into a row of cabinets or wall
units; use these dimensions to achieve a custom look
with the cabinetry while providing the necessary clearance for the top door hinge.
NOTE
It is good practice to leave some room for height adjustment of the appliance to accommodate uneven floors.
20
Freestanding/Semi Built In Models
24" and 48" Models: CS 1311 / CS 1360, SBS 26S1, CS 1200, CS 1350B
Top Door Hinge Clearance CS1200
7/16” (11 mm)
When installing CS units into a row of cabinets or wall
units; use these dimensions to achieve a custom look
with the cabinetry while providing the necessary clearance for the top door hinge.
NOTE
71-9/16” (1817 mm)
71 1/8” (1806 mm)
29-11/16” (754mm)
3/8” (10mm)
39-5/8” (1007 mm)
44
1-3/8”
(35mm)
It is good practice to leave some room for height adjust- 1-3/4”
ment of the appliance to accommodate uneven floors.
21
Freestanding/Semi Built In Models
24" and 48" Models: CS 1311 / CS 1360, SBS 26S1, CS 1200, CS 1350B
Door Swing Clearance CS 1200, CS 13.. - SBS 26S1
Top View
Right side wall of
appliance housing
1''
1/4''
2''
1/4''
1/2''
3/4''
3''
1/4''
1/2''
3/4''
1/2''
3/4''
1/4''
1/2''
3/4''
1''
1/4''
1/2''
3/4''
Door closed
2''
1/4''
Ma
xim
22
1/2''
3/4''
um
do
or
3''
op
en
ing
an
gle
14
5°
Freestanding/Semi Built In Models
24" and 48" Models: CS 1311 / CS 1360, SBS 26S1, CS 1200, CS 1350B
Accessories for Liebherr Freestanding - Semi Built In Appliances
Kits may be necessary to complete this unit's installation or to apply it in a different manner than its original intent. If
a kit is necessary, contact your Liebherr retailer or distributor. All installation materials for accessories are included
with the kits.
Image
Name of the item
For use with model
9900 368-00
Top ventilation
grille for SBS
SBS 26S1
9900 340-00
Water filter kit
(External - installs
in an adjacent
cabinet)
CS 1360
SBS 26S1
7440 002-00
Water filter
CS 1360
CS 1350B
SBS 26S1
Article number
23
Design Guide
Release 11 2015
Download PDF

advertising