Bertazzoni | PROFD30XV | Installation Use and Care Manual | Bertazzoni PROFD30XV Installation Use and Care Manual

Bertazzoni PROFD30XV Installation Use and Care Manual
INSTALLATION, USE & CARE MANUAL
30” DOUBLE BUILT‐IN OVEN
FD30CONXE (FD..PQC1XE.UA)
FD30CONXT (FD..PKC1XE.UA)
FD30PROX (FD..PAZ1XE.UA)
FD30PROXE (FD..PAU1XE.UA)
FD30PROXT (FD..PHU1XE.UA)
PROFD30XT (FD..PHU1XE.UP)
MASFD30XT (FD..PHC1XE.UP)
310494
FROM THE DESK OF THE PRESIDENT
Dear new owner of a Bertazzoni product,
I want to thank you for choosing one of our beautiful
products. We know that you have many brands and
products to choose from and we are thrilled that you
have decided to take one of our products into your
home.
BERTAZZONI SpA
Via Palazzina 8
42016 Guastalla RE
ITALY
WWW.BERTAZZONI.COM
We take as much pride in making our products as
we hope you will in owning them. My family started
manufacturing cooking appliances in 1882. Each of
our products is a blend of Italian design finesse and
superior appliance technology. While we will never
replace your unique talent at preparing delicious
dishes, we try our best at making cooking easier,
more effective and more fun.
Our appliances are designed according to the
strictest safety and performance standard for the
European and the North American market. We
follow the most advanced manufacturing techniques.
Each appliance leaves the factory after thorough
quality inspection and testing. Our distributors and
our service partners are ready to answer any
questions you may have regarding how to install,
use and care for your Bertazzoni product.
This manual will help you learn to use the product
safely and most effectively and care for it so that it
may give you the highest satisfaction for years to
come.
The manual also includes directions for the
professional installer that will install the product in
your home. We recommend using factory-trained
professionals for the delicate task of installing and
testing appliances in your home. Please call
Customer Service if you need help locating a
factory-trained professional installer in your area.
Please keep this manual handy for future use.
Grazie!
TABLE OF CONTENTS
APPLIANCE INFORMATION ______________________________________________ 4
WARRANTY AND SERVICE _______________________________________________ 5
IMPORTANT SAFETY INSTRUCTIONS ______________________________________ 6
PRODUCT SPECIFICATION _______________________________________________ 9
INSTALLATION INSTRUCTIONS __________________________________________ 12
CARING FOR THE ENVIRONMENT ________________________________________ 12
WIRING DIAGRAM _____________________________________________________ 13
CUT-OUT DIMENSIONS _________________________________________________ 15
INSTALLING THE OVEN ________________________________________________ 16
GETTING STARTED ____________________________________________________ 17
USING THE LCD DISPLAY _______________________________________________ 20
BEFORE USING THE OVEN______________________________________________ 23
BASIC OPERATION - DESIGN SERIES MODELS ____________________________ 24
BASIC OPERATION – PROFESSIONAL SERIES MODELS _____________________ 25
TIME MANAGEMENT MENU – TIMER, DELAY/END COOKING, FOOD PROBE ____ 26
COOKING MODES GUIDE _______________________________________________ 29
BROIL / CONVECTION BROIL ____________________________________________ 30
TIPS FOR BEST RESULTS – BROILING AND ROASTING _____________________ 30
TIPS FOR BEST RESULTS - BAKING ______________________________________ 31
TIPS FOR BEST RESULTS - WARMING ____________________________________ 31
TIPS FOR BEST RESULTS - DEHYDRATE __________________________________ 32
ASSISTANT FUNCTION _________________________________________________ 33
SABBATH MODE ______________________________________________________ 38
SELF-CLEANING CYCLE ________________________________________________ 39
CLEANING THE OVEN __________________________________________________ 40
REPLACING THE OVEN LIGHTS __________________________________________ 41
TROUBLESHOOTING GUIDE ____________________________________________ 42
3
APPLIANCE INFORMATION
MODEL
_____________________________________________________
DATE INSTALLED
_____________________________________________________
DEALER
_____________________________________________________
_____________________________________________________
INSTALLER
_____________________________________________________
_____________________________________________________
SERVICER
_____________________________________________________
_____________________________________________________
4
Please kindly register on our web site www.bertazzoni.com to validate your new product warranty and help us to
assist you better in case of any inconvenience.
TWO YEAR LIMITED WARRANTY
The warranties provided by Bertazzoni Spa in this statement apply exclusively to Bertazzoni appliances and accessories
sold as new products to the original owner by a Bertazzoni authorized distributor, retailer, dealer or service center and
installed in the United States and Canada. The warranties provided in this statement are not transferable and have
validity from the date of installation.
COVERAGE INFORMATION
Bertazzoni SpA will repair or replace any component part which fails or proves defective due to materials and/or
workmanship within 2 years from the date of installation and under conditions of normal residential use. Repair or
replacement will be free of charge, including labor at standard rates and shipping expenses. Repair service must be
performed by a Bertazzoni Authorized Service Center during normal working hours.
COSMETIC WARRANTY
Bertazzoni will cover parts showing cosmetic defects in material and workmanship for a period of thirty (30) days from
date of installation of the unit. This coverage will include scratches, stains, surface imperfections on stainless steel,
paint and porcelain, with the exclusion of slight differences in color due to materials and painting/enamelling
technologies.
Exclusions are labor costs, B stock items, out‐of‐box appliances and display units.
HOW TO OBTAIN SERVICE
To obtain warranty service please contact Bertazzoni Customer Service at the numbers below and provide model
number, serial number and date of purchase.
ENGLISH 866 905 0010 ‐ FRANCAIS 800 561 7265
Save proof of original purchase or of original installation to establish warranty period. Copy of the product serial tag is
affixed to the back cover of the instruction manual.
1
WHAT IS NOT COVERED
The product used in any commercial application
2
Repair service provided by other than a Bertazzoni authorized service agency.
3
Damage or repair service to correct service provided by an unauthorized agency or the use of unauthorized
parts.
4
Installation not in accordance with local electrical codes or plumbing codes.
5
Defects or damage due to improper storage of the product.
6
Defects or damage or missing parts on products sold out of the original factory packaging or from displays.
7
Service calls or repairs to correct the installation of the product and/or related accessories.
8
Service calls to connect, convert or otherwise repair the electrical wiring and/or gas line to properly use the
product.
9
Service calls to provide instructions on the use of a Bertazzoni product.
10
Repair service due to product usage in manner other than what is normal and customary for home use.
11
Replacement of wear and tear parts
12
Replacement of glasses and light bulbs if they are claimed to have failed later than 30 days after installation
and in no case later than 4 months after date of purchase
13
Defects and damages arising from accident, alteration, misuse, abuse, improper installation.
14
Defects and damages arising from transportation of the product to the home of the owner.
15
Defects and damage arising from external forces beyond the control of Bertazzoni SpA such as fire, flood,
earthquakes and other acts of God.
In case the product will be installed in a remote area, where certified trained technicians are not reasonably
available, the customer will be responsible for the transportation costs for the delivery of the product to the
nearest authorized service center or for the displacement costs of a certified trained technician.
Bertazzoni does not assume any responsibility for incidental or consequential damages.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation
or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights
which may vary from state to state or province to province.
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions before installing or using the oven for the first time.
Save these instructions and review them periodically.
Keep the instructions in a safe place and transfer them to any future user.
General
This appliance complies with current safety requirements.
The appliance is intended for domestic use only: cooking, baking, roasting, broiling,
defrosting and heating of food. It is not designed for industrial or laboratory use.
Only use the appliance for its intended purpose. Improper use of the appliance can
lead to personal injury and property damage. The manufacturer is not liable for
personal injury, product or property damage caused by improper use of this oven.
Those who lack physi cal, sensory or mental abili ties, or exp erience with the
appliance should not use it without supervision or instructio n by a re sponsible
person.
Children
Children should not be left unattended in an area where the appliance is in use.
Never allow children to hang or lean on any part of the appliance.
CAUTION! Do not store items of interest to children in cabinets above an o ven.
Children climbing on the oven to reach these items could be injured.
Children should not use the unit without supervision unless its operation has been
sufficiently explained so they can use it safely. Children must be able to understand
potential hazards or improper operation.
Do not allow children to touch or play in, on or near the oven when it is in operation.
The oven gets hot at the o ven door glass, the cooling exhaust, the handle and the
operating controls. Use extra care to avoid burns.
Installation
Before installation, make sure that the voltage and frequency listed on the data plate
correspond with the household’s electrical supply to prevent personal injury and/or
damage to the appliance. Consult a qualified electrician if in doubt.
Make sure your appliance is properly installed and grounded by a qual ified
technician.
CAUTION: The applia nce must be effectively grounded to guara ntee the electrical
safety. If in d oubt, have the elect rical system of the hou se checked by a quali fied
electrician. The manuf acturer is not li able for d amages caused by the la ck or
inadequacy of an effective grounding system or the failure to adhere to national and
local electrical codes.
The oven should not to be operated until it has been properly installed.
Installation, maintenance and rep air work should be perfo rmed by a factory
authorized service technician. Work by unqualified persons could be dangerous and
may void the warranty.
Before installation or service, disconnect the po wer supply to th e work area by
removing the fuse, tripping the circuit breaker or shutting off the power main.
WARNING! ELECTRICAL SHOCK HAZARD!
Disconnect electrical power at the circuit breaker box or fuse box before inst alling
the appliance.
Provide appropriate grounding for the appliance.
Use copper conductors only.
Failure to follow these instructions could result in serious injury or death
CAUTION! Label all wi res prior to discon necting when servici ng controls. Wiring
errors can cause improper and dangerous operation.
Verify proper operation after servicing.
6
Oven use
WARNING! Ovens can produce high temperatures that can cause burns.
Prevent children from touching the appliance while in use.
Use heat-resistant potholders when placing items in the oven, turning th em, or
removing them from the oven. The upper heating element and oven racks can
become very hot and cause burns.
To prevent burns, always place oven racks at their desired height while the oven is
cool.
Open the door carefully to allow
removing food.
hot air or steam to escape before placing or
To prevent burns, allow the heating element to cool before cleaning by hand.
During the self cleaning f unction the ov en will become very hot. Prevent children
from coming in contact with the oven.
Remove all a ccessories from the oven before starting a self-clea n cycle. The high
temperatures needed for this program will damage the accessories.
The door gasket is essential for a good seal. Care should be taken not to wear,
damage or remove the gasket.
Only clean parts listed in this manual.
CAUTION: Heating elements may be hot even though they are not glowing.
During and after use, do not let clothing or other flammable materials come in
contact with heating elements or interior surfaces of the oven until they have
had sufficient time to cool. External parts of the oven such as the door glass,
vents, and the control panel can become hot.
Do not block the exhaust vents.
Aluminum foil should not be used to line the bottom of the oven cavity.
Do not place pots, pans or baking sheets directly on the bottom of the oven
cavity.
Do not slide pots or pans on the oven floor. Thi s could scratch and damage the
surface enamel.
Do not let metal objects (aluminium foil, pans) or th e meat probe come in contact
with the heating element.
Do not sit or step on the oven door.
Do not place heavy items on the open oven door.
Only use the food probe supplied with the oven. Contact Bertazzoni Service if you
need to purchase a new probe.
To prevent damage, remove the food probe from the oven when it is not being used.
Do not h eat unopened containers of fo od in the oven, pressure may build up and
cause them to explode.
Never add water to food on a hot tray or pan, or directly onto food in a hot oven. The
steam generated could cause serious burns or scalds.
This oven must only be used for cooking. Do not use it as a dryer, kiln, dehumidifier,
etc. Fumes or vapors given off by glues, plastics or flammable liquids and materials
could be hazardous.
Never store flammable liquids an d materials in, abo ve or unde r an oven, or near
cooking surfaces.
Do not use the appliance to store or dehydrate flammable materials. This is a fire
hazard.
Do not use the oven to heat the room.
When baking frozen pizzas or pies, place them on the rack li ned with p archment
paper. Frozen food like french fries, fish sticks, chicken fingers etc. can be baked on
the baking tray.
Always check that food is sufficiently heated. The time required varies depending on
a number of factors, su ch as initial temperature, quantity of food, type
and
7
consistency of the food, and recipe. Germs present in the food are killed off only at a
sufficiently high temp erature (> 158F / 70C) and after a sufficiently long time (10
minutes or longer). Select a longer cooking time if you are unsure whether the food
is thoroughly heated. To ensure temperature is distributed eve nly, stir food b efore
serving.
It is recommended to cover all cooked food that is left in the oven to be kept warm.
This will prevent moisture from condensing on the interior of the oven.
Be careful when cooking with alcoholic beverages like rhum, whiskey, wine etc. The
alcohol evaporates at high temperatures but may in rare circumstances combust on
the hot heating elements.
Other
Do not use a steam cleaner to clean the oven. Steam could penetrate electrical
components and cause a short.
Do not leave the oven un attended when cooking with oils o r fats, they are a fire
hazard if overheated.
Do not use water on grease fires! Smother the fire with a properly rated dry chemical
or foam fire extinguisher.
Be aware of loose or hanging garments while operating the cooktop, they present a
fire hazard.
Make certain that the po wer cords of small appliances do not come in contact with
or get caught in the oven door.
Use only dry, heat-resistant potholders. Moist or damp potholders used on hot
surfaces may result in steam burns. Do not let potholders come in contact with oils.
Do not substitute towels or other bulky items for potholders.
SAVE THESE INSTRUCTIONS AND REVIEW THEM PERIODICALLY.
8
PRODUCT SPECIFICATION
PROFESSIONAL SERIES OVENS (PRO MODELS)
9
PRODUCT SPECIFICATION
DESIGN SERIES OVENS (CON MODELS)
10
Electrical requirements
Electrical requirements
120/240V - 5500W (24 A max) or 120/208V – 4400W (21 A max).
Upper heating element
3400W
Lower heating element
2100W
Convection heating elements
2 x 1650W
120/240V - 5500W (24 A max) or 120/208V – 4400W (21 A max).
Upper heating element
3400W
Lower heating element
2100W
Convection heating elements
2 x 1650W
11
INSTALLATION INSTRUCTIONS
INSTALLER: PLEASE LEAVE THESE INSTRUCTIONS WITH THE OWNER.
Electrical connection
CAUTION: Before installing the oven, disconnect the power supply by either
removing the fuse, shutting off the power main or manually tripping the
circuit breaker.
Installation work and repairs should only be performe d by a qualified
technician in accordance with all applicable codes and stand ards. Repairs
and service by unqualified persons could be d angerous and may void the
warranty. The manufa cturer is not lia ble for pe rsonal injury, product or
property damage caused by serviced performed by unqualified persons.
Before connecting the appliance to the power supply, make sure that the
voltage and frequency listed on the data plate correspond with the
household electrical supply. This data must correspond to prevent damage
to the product. Consult an electrician if in doubt.
Only operate the appliance after it has been installed in a cabinet.
Power supply
The oven is equipped with a 4 ft. (1.2 m.) flexible metal cable with 4 wires
ready for connection to a dedicated 3 pole, 4 wire grounded power supply:
120/240Vac: 5500 Watt or 24 A max.
or
120/208Vac: 4400 Watt or 21 A max.
Black wire: connect to L1 (hot)
Red wire: connect to L2 (hot)
White wire: connect to N (neutral)
Green wire: connect to GND (ground)
A dedicated line and junction box should be used to connect the oven to a
30 A circuit.
CARING FOR THE ENVIRONMENT
Disposal of packing materials The cardboard box and packing materials protect the appliance during
shipping. Ensure that any plastic wrappings, bags, etc. are disposed of
safely and kept out of the reach of children. Danger of suffocation!
Disposal of an old appliance Old appliances may contain materials that can be recycled. Please contact
your local recycli ng authority about the possibility of recycling these
materials. Make sure that the appli ance presents no danger to children
while being stored for disposal. Before discarding an old appliance, unplug it
from the outlet and cut off its power cord. Rem ove any doors t o prevent
trapping hazards.
12
WIRING DIAGRAM
Models: FD 30 PR OX - FD3 0 PRO XE - FD30 PRO XT
13
WIRING DIAGRAM
Models: FD30CONXE - FD30CONXT
14
CUT-OUT DIMENSIONS
IMPORTANT
Kitchen cabinets shall be made of materials capable of withstanding
temperatures at least 117°F (65°C) above room temperature in order to
avoid possible damage to the cabinets during oven usage.
The oven must be installed into cabinetry and be supported from
underneath.
The oven vent at the bottom of the door must be left unobstructed.
A Vent cut-out 16” x 4” (406mm x 102mm) in the base of the cabinet
B Cut-out for power cord min. 1" x 1” (2.54 x 2.54 cm.)
C Electrical connection box
15
INSTALLING THE OVEN
STEP 1
Fix the supplied skid plates to the cabinet floor.
STEP 2
Prepare the door for removal. Flip up the locking clamps on each door hinge. Slowly
shut the door until the protruding clamps stop the movement. Pull oven door
upwards and remove.
STEP 3
Connect the oven to the electrical supply.
STEP 4
Slide the oven into the cabinet and align.
STEP 5
Reinstall the oven door.
STEP 7
Open the oven door and locate the two mounting screw holes in the oven frame.
Mark and drill ¼” (6 mm) pilot holes. Secure the oven to the cabinetry by inserting
screws through the frame and into the cabinetry. Assemble the supplied screw caps
over the screw head to conceal them.
16
GETTING STARTED
1
2
3
4
5
6
7
8
9
Control Panel (KNOBS only presents on PRO models)
Cooling exhaust
Self-clean cycle door lock
Lights
Food probe port (XT (models only)
Convection fans
Seven level shelf supports
Data plate
Oven door
17
COOLING FANS
Two cooling fans are concealed in the upper portion of the oven. They activate each
time the internal temperature reaches 390F (200C) and continue to operate until the
temperature drops to 320F (160C). Therefore the cooling fans may be on after the
oven has been turned off. When the temperature inside the oven is over 280F
(140C), the cooling fans activate each time the door is opened in order to avoid that
the hot air escaping the cavity enters in contact with the control panel. Cooling fans
are always operated when a cleaning cycle is selected.
NOTE: COOLING FANS ARE DIFFERENT FROM THE CONVECTION SYSTEM
FANS, WHICH ARE PLACED AT THE BACK OF THE OVEN CAVITY.
OVEN LIGHTS
Oven lights are activated each time the door is opened and when the oven is in
operation. In ECO mode, the oven lights will not turn on during operation to save
energy. During the following functions the oven lights are not activated:
- Sabbath Mode
- Cleaning cycle
- Proofing
- Defrost
You can turn on the lights inside the oven by tapping
STEEL RACKS
on the display.
Slide the racks onto the runners on both sides of the oven. The racks have non-tip
safety notches, which prevent them from being pulled out completely while the oven
is in use.
When inserting a rack, always check that the safety notches are at the back. To
remove racks, raise them upwards and pull out.
TELESCOPIC RACKS The oven is also equipped with full-extension telescopic racks that extend on ball
bearing glides. The telescopic racks must be securely fastened to the side runners.
Additional racks can be purchased as accessory (part # 901267).
To change shelf position:
- extract the rack out of the oven
- lift the rack to disengage the runners
- pull the rack out of the oven cavity
- close the rack
- install the rack in another position while completely closed
18
19
USING THE LCD DISPLAY
DESIGN SERIES OVENS (CON MODELS)
PROFESSIONAL SERIES OVENS (PRO MODELS)
A Touch control areas
C Upper cavity Touch control areas
E Lower cavity Temperature knob
G Upper cavity Temperature knob
START
B LCD Display
D Lower cavity Touch control areas
F Lower cavity Cooking modes knob
H Upper cavity Cooking modes knob
The LCD display can be operated 1 minute after the power supply is connected.
To activate the display:
DESIGN SERIES OVENS (CON MODELS)
Tap for 2 seconds any of the touch control areas (A). The fol lowing icons will
appear:
Timer
Settings
Light
Start
PROFESSIONAL SERIES OVENS (PRO MODELS)
Turn the cooking modes knob (right side). The following icons will appear:
Timer
Settings
Once activated each menu will show the icons necessary for navigation and
programming next to the touch control areas.
After 1 min ute without operation the display will go in stand-by mode to reduce
power consumption and the touch control area s will turn off. Touch any control area
for 2 seconds to reactivate the display.
20
ICONS LEGEND
Timer
Light
Settings menu
Start
Scroll left/right and up/down
Confirm selection
Remove selection or leave menu
Stop cooking
Set cooking time, delay start/end time, food probe
Modify cooking mode
Modify cooking temperature
21
SETTINGS
Activate SETTINGS menu with
Select field with
and confirm
Set the desired values with
and confirm
Leave menu
Notes
ECO mode: this setting reduces energy consumption by:
‐ turning off the oven before the end of a cooking program
and using residual heat to complete the cooking
‐ switching off the oven light during cooking
‐ switching off the display in stand-by mode.
Audio Level
Level 1 to 3. Level 1 is NO AUDIO
Metric /Imperial
Metric: Celsius/Kg/24 hour clock
Imperial:Farenheit/Lbs/12 hour clock
SHOW ROOM mode: this option is for showroom demonstration. In showroom
mode the heating elements are not activated. Never use this at home.
TIMER
Activate TIMER with
Set desired time (max 10 hours) with
and confirm
Leave menu
Note
The timer can be used independently from cooking.
The display will show the countdown. A tone so und will be heard at the end
of the countdown. To stop sound at the end of the countdown tap any touch
control areas. To modify the timer enter this menu again.
LIGHT
Turn the oven light on and off by tapping this icon.
Note : this function is not available in the PRO series ovens.
22
BEFORE USING THE OVEN
Before using the oven for preparing food:
 Remove the protective film from the oven door and control panel
 Remove all accessories from the oven
 Remove all stickers from the baking tray, from the roasting pan or from the interior cavity of the oven
 Remove all spacers and packing material from the interior of the oven cavity
 Make sure the room is properly ventilated
 Run the oven for 2 hours at 500F / 260C in turbo mode.
 The two cavities all identical in the double oven and can be operated at the same time, except for pirolytyc
cleaning function.
 The display will show the status of one of the two cavities at a time.The cavity shown on the display is
indicated by the symbol XX or YY placed on the upper right corner.
 In most of the different operation menu the cavity displayed id shown on the screen by the symbol XX or
YY
 To switch the display from one cavity to the other :
PRO models :
A – in stand –by condition operate the function control knobs
B- during operation : touch the area indicated by the symbol XX or YY on the left side of the display
CON models
Always touch the dedicated areas indicated by the symbol XX or YY on the control panel.
The switch of the display is confirmed by sound.
The touch area will remain lit for 3 seconds after the touch.
 The oven will normally work even if its status is not displayed. In case an event happens in a cavity when
the oven status is not displayed (e.g end of cooking function or request of introduction of a food probe) the
interface display will automatically switch to this oven status.
 It is always possible to switch from one oven status to the other using the different switch buttons.
 The modification of the oven parameters affects both cavities at the same time and it is only possible when
both cavities are switched off.
 In case of a malfunction on one of the cavity, depending on the type of malfunction it will be possible to
continue to operate the other cavity. Specific warning messages will be displayed.
This pre-operating procedure will ensure that all internal residues burn off prior to preparing food.
23
BASIC OPERATION - DESIGN SERIES MODELS
START
Activate the oven by touching any control area for 2 seconds.
Start programming with
Select COOKING MODES
and confirm
Set desired COOKING TEMPERATURE
and confirm
The oven will start PRE-HEATING in a few second showing the progress in the
display. The end of pre-heating will be confirmed with a tone. Place the food in the
oven when the desired temperature has been reached.
Note
The preheating bar is not shown.in broil, convection broil, dehydrate, defrost,
warming and proofing modes.
MODIFY/STOP
Modify COOKING MODE during cooking with
Modify COOKING TEMPERATURE during cooking with
STOP cooking with
and confirm
24
BASIC OPERATION – PROFESSIONAL SERIES MODELS
START
Activate the oven by turning the COOKING MODE knob (right)
Select COOKING MODE by turning the right knob
Select COOKING TEMPERATURE by turning the temperature left knob
The oven will start PRE-HEATING in a few second showing the progress in the
display. The end of pre-heating will be confirmed with a tone. Place the food in the
oven when the desired temperature has been reached.
Note
The preheating bar is not shown-in broil, convection broil, dehydrate, defrost,
warming and proofing modes.
In order to shorten the heat-up time the preheating is always done with turbo mode
Each cooking mode has a default optimum temperature that appears as soon the
cooking mode is selected
MODIFY/STOP
Modify COOKING MODE during cooking by turning the cooking mode knob
Modify COOKING TEMPERATURE during cooking by turning the temperature knob
Stop cooking by turning the function knob in the OFF position
25
TIME MANAGEMENT MENU – TIMER, DELAY/END COOKING, FOOD PROBE
START
After programming the oven for cooking, touch
management menu.
or
to enter the time
SET TIMER
This function is simply a minute minder: the timer can be used independently from
cooking and it will not turn off the oven at the end of the set time. For the oven to
shut off automatically, select END OF COOKING (see below).
Activate the TIMER
Set the desired duration
(max 10 hours) and confirm
Leave menu
The display will show the countdown. The end of the countdown will be confirmed
with a repeating tone. Tap any touch control area to stop tone.
Important!
COOKING WILL NOT STOP AT THE END OF THE COUNTDOWN. TURN THE
OVEN OFF MANUALLY AND REMOVE FOOD FROM OVEN TO AVOID
OVERCOOKING.
END OF COOKING
The oven will automatically turn off after the set cooking time has elapsed.
Activate END OF COOKING
Set the desired duration
(max 10 hours) and confirm
Leave menu
The display will show the countdown. the oven will turn off at the end of the
countdown and the display will show END OF COOKING – BUON APPETITO! The
end of the countdown will be confirmed with a repeating tone. Touch any touch
control area to stop tone.
MODIFY/CANCEL
Activate end of cooking menu and modify the time value.
Set time to 0:00 to cancel
Note
Cooking time is calculated from the end of preheating. During preheating the end of
cooking time is not shown in the display.
It is not possible to set end of cooking when using the food probe. If a food probe
temperature is set, the end of cooking will be deleted.
26
DELAY START The oven will start at a desired time.
Activate DELAY START
Set desired time before oven will turn on
and confirm
Leave menu
The display will show the countdown. The oven will turn on at the end of a count
down. The end of the countdown will be confirmed with a repeating tone.
Note
DELAY START can be combined with the END OF COOKING.
FOOD PROBE
The food probe is only available on XT models.
The food probe monitors the core temperature of the food during cooking and turns
off the oven when the desired temperature is reached. It can be used ONLY with the
following cooking modes:
Convection
Bake
Convection bake
Turbo
Broil
Convection Broil
Insert the food probe in the item to be cooked. For best results, insert the probe as
close as possible to the center of the item and make sure it is not in contact with
bones or fat. Improper placement of the probe could shut the oven off too early and
result in uncooked food. With poultry, make sure the probe does not rest in a cavity.
Activate
Select the desired food temperature with
and confirm
After the preheating sequence is completed, the display will show the message
INSERT FOOD PROBE. CONTINUE?
27
Connect the probe jack to the port located in the upper left side of the oven cavity.
Place the food in the oven and confirm
The display will show the set temperature and the actual temperature measured by
the probe. The oven will turn off when the desired food temperature is reached. The
display will show END OF COOKING – BUON APPETITO! End of cooking will be
confirmed with a tone. To stop tone tap any touch control area.
Note
Food probe temperature can be selected at any time while cooking.
If the probe jack is not inserted in its port, a message will appear on the display
requiring confirmation of the probe insertion. Cooking will stop if the probe is not
inserted. Select NO on the confirmation screen to continue cooking without probe.
Important
DO NOT LEAVE THE PROBE IN THE OVEN CAVITY WHEN NOT IN USE.
28
COOKING MODES GUIDE
MODE
BAKE
DETAILS
Bake and broil elements ON
Convection OFF
Temperature 100F - 500F
Use lower 2 shelf levels.
CONVECTION BAKE
Bake element ON at full power
Broil element ON at moderate power
Convection fan ON
Temperature 100F- 500F
Use several levels at the same time.
NOTE: As a general rule, the temperature of a
recipe not designed for baking in a convection
oven should be lowered by 20F (15C)
CONVECTION
Convection fan and convection element ON
Use several levels at the same time.
Temperature 100F - 500F
NOTE: As a general rule, the temperature of a
recipe not designed for baking in a convection
oven should belowered by 20 °F (15 °C.)
TURBO
Bake element ON at full power
Convection element and fan ON at full power
USE FOR/TIPS
Soufflés
Meringues
Angel food cakes
Cream puffs
Cookies
Cakes
Cheesecakes,
Pies
Quiches
Baked potatoes
Cookies
Cakes
Breads
Rising dough
Cheesecake
Pies
Quiches
Baked potatoes
Casseroles
Gentle cooking of p astries, soufflés and
cakes.
At higher temperature use also for roasting
meats and poultry.
Uniform cooking with strong heat from the
bottom of pizza, focaccia and bread.
Temperature 100F – 500F
Use shelf levels 2 and 3
BROIL
Broil element ON
4 power settings – LOW (1) to HIGH (4)
Brown food on the top side only. Turn food
over if browning is required on both sides.
The element is heated for the first 3 minutes at
maximum power and then the power is
reduced according to the selected power
setting.
CONVECTION BROIL
Broil element ON
Brown food on top and bottom side. This
mode is preferred for browning food that is
too delicate for turning such as fish.
Convection fan ON
4 power settings – LOW (1) to HIGH (4)
The element is heated for the first 3 minutes at
maximum power and then the power is
reduced according to the selected power
setting.
DEFROST/DEHYDRATE
In DEFROST mode only the fan is active to
circulate air in the cavity. All heating elements
are turned off.
NOTE: The degree of browning on each
side might be different.
Defrost food
Dehydrate food, flowers, vegetables.
In DEHYDRATE mode th e fan is on and the
cavity is maintained at 100F.
PROOFING
Bake element ON at low constant heat power
Fan on every 5 minutes to eliminate stagnant
air.
For best results, place dough in bowl and
cover with a clean towel.
Use any shelf level.
WARMING
Bake element at low to moderate power.
Temperature 140/170/200F preset.
29
Use the warming program in Sabb ath
mode (S.M.) during religious observance.
BROIL / CONVECTION BROIL
The broil element operates on 4 different power levels.
The element is heated for the first 3 minutes at maximum power and then the power is reduced according to
different desired effects.
Level 1 produce a mild browning of the food surface
Level 4 produce an intense irradiated heat that cause a fast browning of food.
Select the power level according to the desired effect on food.
Select BROIL to brown food on the top side only. This mode requires turning food if browning is required on
both sides
Select CONVECTION BROILER to brown food slightly also on the bottom side. This mode is preferred for
browning food on both sides that is too delicate for turning such as fish. The degree of browning on each
side might be different
TIPS FOR BEST RESULTS – BROILING AND ROASTING
ADJUST TO DESIRE LEVEL OF ‘DONENESS’
FOOD
SHELF
POSITION
Ground beef
patties, ½”
thick
6
T-Bone steak
6
Flank steak
6
Eye of round
roast
5
Loin roast
5
Boneless
skinless
chicken
breasts
6
5
Half chicken
5
Turkey
TEMPERATURE
APPROXIMATE
COOKING TIME
LEV 4
15 to 20 minutes
Broil until not
pink in center
LEV 4
12 to 20 minutes
Broil until done to
desired level
LEV 4
12 to 20 minutes
Broil until done to
desired level
330°
20 to 25 min per
pound
Small roasts
require longer
time per pound;
reduce time
using Convection
Bake
330°
20 to 25 min per
pound
Cook until juices
are clear
LEV 3
20 to 25 minutes
Cook until juices
are clear
LEV 3
25 to 30 minutes
Remove skin and
ook until juices
are clear
LEV 4
30 to 45 minutes
Turn with tongs
and cook until
juices are clear
350°
75 to 90 minutes
Reduce time
using Convection
Bake. Time may
vary if stuffed.
330°
20 to 25 min per
pound
Reduce time
using Convection
Bake. Time may
vary if stuffed.
Broiler
Convection Broiler
Broiler
Convection Broiler
Broiler
Convection Broiler
Bake
Convection bake
Chicken thighs
Roast chicken
COOKING MODE
4
4
Bake
Convection bake
Broiler
Convection Broiler
Broiler
Convection Broiler
Broiler
Convection Broiler
Bake
Convection bake
Bake or
Convection bake
30
SUGGESTIONS
TIPS FOR BEST RESULTS - BAKING
CHECK PACKAGE DIRECTIONS
FOOD
PAN SIZE
TEMPERATURE
Cookies
Layer Cakes
Sheet Cakes
Bunt Cakes
Brownies, Bar Cookies
Biscuits
Quick Bread
Muffins
Fruit Pies
Fruit Cobblers
Yeast Bread
Dinner Rolls
Cinnamon Rolls
Yeast Cake
12”x15” Cookie Sheet
8”or 9”Round
9”x13” Pan
12 Cup
9"x9" Pan
12"x15" Cookie Sheet
8"x4" Loaf Pan
12 cup Muffin Pan
9" Diameter
9"x9" Pan
8"x4" Loaf Pan
9"x13" Pan
9"x13" Pan
12"x15" Cookie Sheet
370°
350°
350°
320°
320°
420°
350°
420°
420°
400°
370°
400°
370
400°
COOKING TIME
(minutes)
8 to 12
25 to 35
30 to 40
60 to 75
20 to 25
10 to 15
55 to 70
14 to 19
35 to 45
25 to 30
25 to 30
12 to 18
25 to 30
20 to 30
TIPS FOR BEST RESULTS - WARMING
FOOD
Beef
Bacon
Biscuits and Muffins (covered)
Casserole (covered)
Fish and Seafood
Deep Fried Foods
Gravy or Cream Sauces (covered)
Lamb and Veal Roasts
Pancakes and Waffles (covered)
Potatoes Baked
Mashed (covered)
Pies and Pastries
Pizza (covered)
Pork
Poultry (covered)
Vegetables (covered)
TEMPERATURE
150°F (70°C)
200° -225°F (90 - 110°C)
175°-200°F (80 – 90°C)
175°-200°F (80 – 90°C)
175°-200°F (80 – 90°C)
200° -225°F (90 - 110°C)
175°F (80°C)
175°-200°F (80 – 90°C)
200° -225°F (90 - 110°C)
200°F (110°C)
175°F (80°C)
175°F (80°C)
225°F (110°C)
175°-200°F (80 – 90°C)
175°-200°F (80 – 90°C)
175°F (80°C)
31
LEVEL
2..5
2..5
2..5
2..5
2..5
2..5
2..5
2..5
2..5
2..5
2..5
2..5
2..5
2..5
TIPS FOR BEST RESULTS - DEHYDRATE
FOOD
PREPARATION
APPROXIMATE TIME
(hrs)
DONE WHEN…
Apples
Cut in ¼” slices and dip
in 1/4 cup lemon juice +
2 cups water solution
11-15
Slightly pliable
Bananas
Cut in ¼” slices and dip
in 1/4 cup lemon juice +
2 cups water solution
10-15
Soft, pliable
Cherries
Wash and towel dry.
Remove pits
10-15
Pliable, leathery, chewy
Orange peels and
slices
Peel and cut in 1/4"
slices
Pineapple rings
Towel dry
Strawberries
Wash and towel dry. Cut
in 1/2" slices. Place skin
(outside) down on rack
12-17
Red peppers
Wash and towel dry.
Remove stems, chop
coarsely about 1" pieces
16-20
Leathery with no moisture inside
Mushrooms
Wash and towel dry. Cut
off stem end. Cut into
1/8" slices
7-12
Tough and leathery, dry
Tomatoes
Wash, drain well.and
towel dry. Cut in 1/8"
slices.
16-23
Dry, brick red colour
Oregano, sage,
parsley, thyme,
fennel
Rinse and dry with
paper towel
3-5
Crisp and brittle
Basil
Use basil leaves 3 to 4
inches from top. Spray
with water, shake off
moisture and pat dry
3-5
Crisp and brittle
Peels:2-4
Slices: 12-16
Canned: 9-13
Fresh: 8-12
32
Orange peel: dry and brittle.
Orange slices: skins are dry and
brittle, fruit is slightly
Soft and pliable
Dry, brittle
ASSISTANT FUNCTION
Available on XT models only
Developed with the help of Italian professional chef consultant Roberto Carcangiu, Bertazzoni’s exclusive
ASSISTANT function is a revolutionary system for upgrading oven cooking in the home. The ASSISTANT is
pre-programmed with finely calibrated sets of cooking modes, temperatures and times sequences for each
type of food. The system does not provide recipes – those are yours to choose from. The ASSISTANT will
simply ‘pilot’ the oven to help you make the best of your oven recipes.
Enjoy selecting the sequences already stored in the ASSISTANT that best suit your own style of cooking and
culinary taste. After you have familiarized with them, you will be able to build new sequences of your own
creation and store them for future use.
The ASSISTANT is available on XT models only together with a food probe for temperature control.
ASSISTANT
MENU
MANAGE - Selected the fo od type, weigh/size, type of cooking and desired finish
and let the Assistant oversee the cooking until your dish is perfect.
SAVE – After you cook a perfect dish, n ame the cook ing sequence and l et the
Assistant store it for future use.
RETRIEVE – Retrieve a pr eviously stored set and let the ASSISTANT manage the
oven according to the instructions you selected for that dish.
BREAD
CAKES AND PASTRY
FISH
MEAT
PASTA
PIZZA
POULTRY
VEGETABLES
33
START
Activate the oven by touching any control area for 2 seconds.
Start programming with
Select ASSISTANT
Select MANAGE
with
or with right knob and confirm
with
and confirm
Select TYPE OF FOOD with
and confirm
Selected food categories will guide you throug h the selecti on of additional
parameters (e.g. for meat: weight, type of cut, food probe temperature). Follow the
directions on the display, select the appropriate parameters and confirm.
The oven will begin pre-heating and signal the end of the pre-heating cycle with a
tone. Insert the food in the oven only after the pre-heating is complete.
The display will show the time remaining until the end of the cooking sequence.
The oven will turn off at the end of the cooking cycle. The display will show END OF
COOKING – BUON APPETITO! End of cooking will be confirmed with a tone.
Important:
COOKING WILL CONTINUE WITH RESIDUAL HEAT. REMOVE THE DISH FROM
THE OVEN IMMEDIATELY TO AVOID OVERCOOKING.
FOOD PROBE
If the cooking sequence requires the use of the food probe, the display will ask you
to input the desired food temperature (lower = rare, higher = well done). Once the
pre-heating cycle is completed, the display will remind you to insert the food probe.
Connect the food probe jack to the appropriate port in the oven cavity at the end of
preheating. The cooking sequence will start only after confirmation that the food
probe has been inserted.
When using the food probe, the display will show the food probe temperature (actual
and target) instead of the remaining time until the end of cooking.
The oven will turn off when the food temperature measured by the probe reaches
the desired level. The display will show END OF COOKING – BUON APPETITO!
End of cooking will be confirmed with a tone.
Important:
COOKING WILL CONTINUE WITH RESIDUAL HEAT. REMOVE THE DISH FROM
THE OVEN IMMEDIATELY TO AVOID OVERCOOKING.
STOP/MODIFY
To STOP cooking tap
and confirm.
It is not possible to change cooking mode, temperature or duration while cooking
with the ASSISTANT function. If additional cooking is needed, operate the oven in
manual mode until the desired result is obtained.
34
Important
Pre-programmed sequences have been calibrated for cooking food starting from
room temperature. If using frozen food for a dish, defrost it before starting a
sequence.
Note :
In low temp roasting mode, food is baked at a very low temperature then requiring
long cooking time. Baking time can last up to 5/6 hours, according to food
dimensions.
In assistant cooking mode, the time is calculated from the end of preheating. Make
sure to introduce food in the oven as soon as the preheating time is finished,
otherwise the cooking time can result too short.
All cooking methods refer to fresh food, except where indicated. For frozen food,
refer to your standard procedure
ASSISTANT FUNCTION - OPTIONS CHART
Food
Preparation
Food probe
Traditional Roasting
Low Temp. Roasting
Meat
Braising
Slow cooking
Oven Fried
Traditional Roasting
Poultry
Slow cooking
Traditional Roasting
Oven Fried
Fish
Grilled - food temp. probe
Grilled – manual
Rising pastry dough
Cakes
Shortbread dough
Manual
Bread
Food temp. probe
Pizza
Homemade pizza
Frozen au gratin
Pasta
Fresh au gratin
Stew / Sautè
Vegetables
Grilled
Roasted potatoes
* Time indicated excludes pre-heating
SLOW COOKING
yes
yes
yes
yes
yes
yes
yes
yes
Pre-programmed
cooking time*
90 min.
6 min.
12 min.
7 min.
35 min.
25 min.
22 min.
14 min.
yes
35 min.
20 min.
7 min.
50 min.
Slow cooking allows cooking of very l arge pieces of meat and poultry (over 4Kg. or
8,8Lbs ) for several hou rs at a very lo w temperature. This co oking mode do es not
end when the temperature set on the food probe is rea ched, but the food i s then
continuously kept at this temperature. The temperature shown on the food probe will
them continuously be adjusted (-15F +0)once the set valve has been reached.
A manual switch off of th e oven is th en required. A cooking time of 1 2 hours is
suggested. The program is automatically switched off after 24h.
CUT TYPE
Cut type
Less tender
Type of meat
Beef chuck
Beef brisket
Corned beef
Short ribs
Pork shoulder
Lamb shank
Pork blade roast
Beef tenderloin
Prime rib
Pork tenderloin
Leg of lamb
Chicken legs/thighs
Tender
35
SAVE
The ASSISTANT stores your latest cooking sequence for future use.
It is possi ble to save in the memo ry the last co oking sequence performed in each
oven. In this case enter in the assistant mode from the oven cavity where You have
performed the cooking sequence You would like to save.
Select ASSISTANT
Select SAVE
with
with
or with right knob and confirm
and confirm
The display will show the last cooking sequence performed, indicating the set of
cooking modes, temperatures and times used for the cycle.
Confirm
Select FOOD CATEGORY and confirm
Enter a name for this cooking sequence - scroll through the keyboard with
and confirm each letter with
NOTE: scrolling accelerates by keeping the finger on the touch area.
Confirm with
Touch
to leave this menu without saving the sequence.
After saving a sequence, the display will return to the main ASSISTANT menu.
Important
The memory can store up to a maximum of 32 personalized cooking sequences in
addition to those pre-programmed. When the memory is full and you attempt to
store another cooking sequence, a message will prompt you to delete one of the
previously stored sequences.
The interface will eliminate steps that are not significant for cooking results, such as
functions used for less then 1 minute.
A maximum of 4 different cooking steps (combination of function/temperature/time)
can be recorded in a sequence.
36
RETRIEVE
To retrieve a previously stored personal sequence follow these simple steps.
Once saved, a personal cooking sequence can be retrieved from both oven cavities,
as the file of save cooking modes is common for both cavities.
For this reason, deleting or modifying a personal cooking sequence will also affect te
file for both cavities.
Select ASSISTANT
Select RETRIEVE
with
with
or with right knob and confirm
and confirm
Select FOOD CATEGORY and confirm
Select a stored sequence and confirm
You will have the following options:
- START: will immediately start the cooking sequence.
- MODIFY: allows to modify food category and name associated to a personal
cooking sequence
- DELETE: delete the selected cooking sequence. Confirmation is required.
Note:
if no cooking sequence is saved an empty menu will be displayed.
37
SABBATH MODE
This special program is designed for religious observances.
START
Activate the oven by touching any control area for 2 seconds.
Start programming with
Select WARMING with
Select S.M. with
or with right knob and confirm
and confirm
The oven will turn on and pre-heat until the temperature of 200F is reached. Then,
the temperature will be held constant until the oven is switched off. Opening of the
door will not cause an immediate re-heating of the oven: the heating will continue
according to a set procedure independent from use.
The oven lights will not turn on in Sabbath Mode even if the door is open.
MODIFY/STOP
To modify cooking mode:
‐
‐
DESIGN SERIES OVEN: Scroll COOKING MODES
PROFESSIONAL SERIES OVENS: use the cooking mode knob (right)
Turn off the oven with
38
SELF-CLEANING CYCLE
DESCRIPTION
In the self-cleaning cycle, the oven cavity is heated to very high temperatures to
burn off any residue on the oven interior. After the cleaning cycle, any burnt off
residue is transformed to ash and can be easily wiped out with a damp sponge.
Spilled fruit juices may permanently discolour surfaces. This discoloration is
permanent but will not affect the efficiency of the enamel.
If the oven is not cleaned regularly, debris may become extremely difficult to remove
even with the CLEAN function.
DOOR LOCK
Due to the extremely high temperature reached in the self-cleaning function, the
door will automatically lock after 1 minute. The lock will release once the cycle has
ended and the oven temperature has dropped below 500F (260C).
PREPARE
Before starting the CLEAN function:
‐ Remove large pieces of debris and grease deposits from the interior of the oven
cavity. Debris and grease can ignite at high temperatures.
‐ Remove all accessories from the oven. The high temperature reached during the
cycle will damage the accessories.
SPECIAL CONDITIONS It is possible to activate the cleaning cycle on one of the cavity at a time. During the
clean cycle the other cavity will be completely switched off, the door will not be
locked but the oven lights will not work.
It will not be possible to switch the interface display to the other oven.
It will not be possible to activate a cleaning cycle if the other cavity is in operation.
START
CON models: Select Clean in the COOKING modes menu
PRO models: set both knobs to CLEAN. NOTE: if either knob is moved from the
clean position, the cycle is aborted.
Select REGULAR or ECO cleaning mode. The regular cycle lasts longer than the
ECO cycle and therefore uses more energy.
Confirm that all accessories have been removed from oven cavity to start the
cleaning cycle.
The oven door will lock for the duration of the cycle and it will not be possible to
operate the oven.
During the clean cycle the cooling fans are constantly in operation.
The end of the cleaning cycle will be confirmed with a tone.
The oven door will remain locked until the oven temperature falls below 500F
(260C).
STOP
CON models: touch OFF
PRO models: move either knob from clean position.
CAUTION
The interior of the oven will still be at high temperature when the automatic lock is
released – USE MAXIMUM CAUTION TO AVOID BURNS.
If "SELF CL EAN" is accidentally selected, shut off the oven and wait for th e oven
temperature to drop for the door lock to release.
39
CLEANING THE OVEN
FRONT
Clean spills from the front of the appliance immediately. Spills may cause
discoloration of the glass and steel surfaces.
Clean the front of the appl iance with a clean sponge or cloth, liquid dish soap and
warm water. Alternatively, use a clean, damp microfiber cloth and then dry wit h a
soft cloth.
All surfaces are vulnerable to scratching. Scratches can lead to shattering of the
glass surface.
All surfaces can become discoloured or changed if they come into contact with
unsuitable cleaning agents.
In PRO model the display is protected with a transparent glass which is very
delicate. Avoid contact with cleaning agents. Do not rub the surface. Swipe
delicately with a mild cleaning agent and dry with a clean cloth.
INTERIOR
Caution: Danger of burns! Allows the oven to cool before cleaning.
Clean the oven surface with a solution of hot water, liquid dish soap and a sponge or
soft nylon brush.
Do not use abrasive cleaning agents, hard brushes, metal scouring pads, steel wool,
knives or other abrasive materials.
Avoid cleaning the gasket around the interior (sealing the door glass pane). It is
made from glass fiber and will get damaged if rubbed or scrubbed.
Do not use oven spray on any part of this oven.
Tips
The porcelain enamel finish of the cavity is a cid resistant, but not acid proof. Acidic
food, such as citrus juices, tomatoes, rhubarb, vinegar, alcohol or milk, sh ould be
wiped off and not allowed to bake onto the porcelain during the next use.
Remove the oven racks when cleaning the interior of the oven.
The heating elements in the oven do not require cleaning; the elements burn
themselves clean when the oven is in use. Elements are permanently connected. It
is not necessary to clean the broiler shield above the broil element.
To avoid surface damage from cleaning, do not use any of the following:
‐
‐
‐
‐
‐
‐
‐
‐
‐
‐
cleaning products that contain washing soda, ammonia, acids, or chlorine
lime removers
scouring cleansers, e.g., scouring powder, scouring liquid, pumice stones
solvent-based cleansers
stainless steel cleaners
dishwasher detergents
oven sprays
glass cleaners
scouring sponges or brushes, such as pot scrubbers
sharp metal scrapers
FOOD PROBE
Wash with soapy water and a sponge. Rinse under running water. Do not leave the
probe submerged in water. Do not clean the food probe in the dishwasher.
ACCESSORIES
Wash with soapy water and a sponge. Rinse under running water.
40
REPLACING THE OVEN LIGHTS
WARNING!
Disconnect power before servicing unit.
To replace the oven light bulb, remove the protection cap. It is not necessary to
remove the rack supports.
NOTE: Touching the bulb with fingers may cause the bulb to burn out. Always use
protective gloves or use a cloth to remove the bulb.
41
TROUBLESHOOTING GUIDE
OVEN PROBLEM
POSSIBLE CAUSES AND/OR REMEDY
Oven does not function
Range is not connected to electrical power. Ask a professional to
check power circuit breaker, wiring and fuses.
Self-clean cycle does not activate Door is not shut tight and door latch cannot lock
Door does not open
Oven is still in self-clean mode. Door latch will release when safe
temperature is reached.
Oven light does not work
Light bulb is burned out.
Oven is not connected to power.
Clean cycle is on.
Oven door is locked and will not
release after cooling
Turn the oven off at the circuit breaker and wait 5 minutes. Turn
breaker back on. The oven should reset itself and will be operable.
Check the circuit breaker or fuse box to your house.
Oven is not heating
Make sure there is proper electrical power to the oven.
Make sure the oven temperature has been selected.
Oven light is not working properly Replace or reinsert the light bulb if loose or defective.
Oven light stays on
Check for obstruction in oven door. Check to see if hinge is bent.
Cannot remove light cover
There may be debris/spillage around the lens cover. Wipe lens cover
area with a clean dry towel prior to attempting to remove the lens
cover.
One cavity is not working
Other oven is in self cleaning mode this is normal, wait for
termination of the cleaning cycle
One cavity is not working but
other cavity is working regularly
a problem in the involved cavity has occurred. Contact after sale
service with the indication of the error message shown on the display.
Specific error messages may appear in case of malfunction. Call after sale service and provide the
information that appear in the display for a quick and accurate diagnosis.
42
NUM.
COMPONENT
DESCRIPTION
EXPLODED VIEW
SPARE PARTS LIST
FD30CONXE
FD30CONXT
FD30PROX
FD30PROXE
FD30PROXT
800584
800584
800584
800584
800584
800588
800588
800585
800585
800585
800587
800587
800587
800587
800587
800589
800589
800589
800589
800589
1
409063
OVEN TOUCHSCREEN SELECTOR BOARD
1
1
1
310494
USER MANUAL
1
1
1
1
1
1
310495
USER MANUAL
1
1
1
1
1
1
601444
WIRING
1
1
1
1
1
1
601665
WIRING
2
2
4
4
4
1
601673
WIRING
2
2
2
1
601674
WIRING
4
4
4
1
601676
MEAT PROBE WIRING
1
601677
POWER BOARD INTERFACE WIRING
2
2
1
601678
DOUBLE OVEN COMMUTATOR WIRING
1
1
1
601679
COOLING FANS WIRING
2
2
1
601691
MEAT PROBE WIRING
4
4
2
2
2
2
2
2
2
2
2
2
1
601692
WIRING
2
2
2
2
2
30
202797
OVEN RESISTANCE FASTENING CLAMP
6
6
6
6
6
38
306003
THERMOSTAT CLIP
4
4
4
4
4
104
202729
MOTORFAN FLAP
2
2
2
2
2
105
202724
UP SUPPORT FOR AXIAL COOLIN FAN
1
1
1
1
1
105
202724
UP SUPPORT FOR AXIAL COOLIN FAN
1
1
1
1
1
106
202723
DOWN SUPPORT FOR AXIAL COOLIN FAN
1
1
1
1
1
106
202723
DOWN SUPPORT FOR AXIAL COOLIN FAN
1
1
1
1
1
117
150009
PROTECTION FOR VENTILATED OVEN
2
2
2
2
2
119
941014
GRID FOR OVEN
2
2
2
2
2
120
101048
BLACK OVEN DRIP TRAY
1
1
1
1
1
120
101441
BLACK OVEN DRIP TRAY
138
202735
DISHWARMER BOTTOM
1
166
50008
INSIDE OVEN DOOR
2
2
2
2
2
311
301122
SCREW 4,2X30
2
2
2
2
2
313
301073
SCREW 5MAX10 TCT
313
301073
SCREW 5MAX10 TCT
329
309160
INSIDE DOOR SPACER
12
12
12
329
309161
INSIDE DOOR SPACER
4
4
4
330
309035
FIXING BUSH FOR RETAINER HEADPIECE
4
4
4
4
4
388
301133
SCREW 4,2X13
98
94
116
112
112
389
301109
SCREW M5X32 FOR HANDLE
440
402167
CATALYST
2
2
2
2
2
441
404507
SIDE GRID FOR OVEN
4
4
4
4
4
442
404508
GRID FOR OVEN
2
2
2
2
2
443
404497
GRID FOR TRAY
1
1
1
1
443
404512
GRID FOR TRAY
444
405095
OVEN DOOR HINGE FIX PART
4
4
4
4
446
405094
OVEN DOOR HINGE
4
4
4
4
470
404509
GRID FOR OVEN
2
2
2
2
2
568
508039
PROBE
2
2
2
2
2
573
609001
MEAT PROBE
1
1
1
1
2
2
12
12
4
1
4
2
4
2
584
609002
MEAT PROBE CONNECTION
608
309159
ANTI-SHORT BUSHING AS5
2
2
2
2
2
2
2
609
309151
CORE HITCH
4
4
4
4
4
610
603031
LOOK DOOR MOTOR
2
2
2
2
2
611
603030
OVEN CONVECTION FAN
4
4
4
4
4
612
603019
COOLING FAN
2
2
2
2
2
612
603019
COOLING FAN
2
2
2
2
2
613
606079
OVEN RESISTANCE 2100W 230V
2
2
2
2
2
614
606080
RESISTENCE 3400W 240V
2
2
2
2
2
615
606090
CIRCULAR HEATER 3300W
4
4
4
4
4
623
608057
OVEN BULB WITH HOLDER
4
4
4
4
4
624
309158
SQUEEZE CONNECTORS L423
1
1
1
1
1
641
602056
COMMUTATOR 11+0
2
2
2
642
602047
TEMPERATURE SELECTOR
648
607027
TERMINAL SEPARATOR
658
409061
DISPLAY + LOGIC CARD
658
409067
DISPLAY + LOGIC CARD
658
409062
DISPLAY + LOGIC CARD
658
409065
DISPLAY + LOGIC CARD
659
409058
LOGIC CARD
662
602049
THERMOSTAT
2
2
2
2
2
2
2
2
1
1
1
1
2
2
2
2
2
2
2
2
2
2
4
4
1
947
403343
HANDLE TERMINAL
4
1041
4010219
ELECTRIC KNOB
4
1406
403534
OVEN DOOR HANDLE
1406
403535
OVEN HANDLE
1406
403531
OVEN DOOR HANDLE
1406
403519
OVEN HANDLE
1407
406463
OVEN DOOR GLASS
1407
406469
OVEN DOOR GLASS
2
2
2
2
2
2
1
2
1
2
2
1407
406471
OVEN DOOR GLASS NO BRAND NAME
1
1
1409
411128
GLASS OVEN GASKET
2
2
2
2
1411
411127
GASKET FOR OVEN FRONT
2
2
2
2
1414
602050
THERMOSWITCH
2
2
2
2
2
1415
602051
THERMOREGULATOR
2
2
2
2
2
1415
602051
THERMOREGULATOR
2
2
2
2
2
1421
406462
INTERNAL OVEN GLASS
6
6
6
6
6
1427
406461
GLASS CONTROL PANEL
1
1
1428
406474
CONTROL PANEL GLASS
1
1
1508
410809
STAINLESS STEEL OVEN DOOR
2
2
1508
410765
STAINLESS STEEL OVEN DOOR
1601
410812
CONTROL PANEL FRAME
1602
211124
CONTROL PANEL
1
2
1
2
2
1
1
1
1
1605
402446
INSULATING FOR LAMP
4
4
4
4
4
1614
202765
UP BACK PANEL
1
1
1
1
1
1614
202766
DOWN BACK PANEL
1
1
1
1
1
1615
202761
CONTROL SUPPORT
1
1
1615
202722
CONTROL SUPPORT
1
1
1
1639
202733
VERTICAL VENT
4
4
4
4
4
1677
200469
FRONT PANEL INOX
2
2
2
2
2
1687
202728
UNDER OVEN CARTER
1
1
1
1
1
1690
202763
UNDER OVEN CARTER FOR OVEN UP
1
1
1
1
1
1712
200493
INNER GLASSES FRAME RIGHT
4
4
4
4
4
1861
6010014
TUBE
1
1
1
1
1
2019
202736
SIDE CHASSIS
4
4
4
4
4
2023
202734
REAR SIDE CHASSIS
2
2
2
2
2
2028
202738
UP SIDE CHASSIS
1
1
1
1
1
2098
202727
ELECTRIC RESISTANCE COMPARTMENT
2
2
2
2
2
2130
202726
GRILL PROTECTION
2
2
2
2
2
2147
150008
FRONTAL SCREEN GRILL
2
2
2
2
2
2184
202730
LAMPS WOOL FASTENING CLAMP
4
4
4
4
4
2185
1080053
FIXING DYSPLAY
1
1
2185
202743
FIXING DYSPLAY
1
1
1
2301
202803
SUPPORT LOGIC CARD
2
2
2
2
2
2306
202764
EQUERRE SUPPORT FERME CABLE
1
1
1
1
1
2375
1080011
SQUARE FOR HANDLE DOOR FIXING
4
4
4
2381
202725
FLAP FASTENER
8
8
8
8
8
2404
202741
CARTER CATALYST
2
2
2
2
2
2406
202572
DOOR FOR INSPECTION LOOK DOOR
2
2
2
2
2
2409
201187
TERMINAL SEPARATOR DOOR
5
5
5
5
5
2410
202742
LOOK DOOR CARTER
2
2
2
2
2
2501
1080010
SCREEN FIBER GLASS
2
2
2
2521
1080039
PROTECTION GLASS FIBER INSIDE O. DOOR
2
2
2
2
2
3201
402444
GLASS FIBER FOR MUFFLE
2
2
2
2
2
3215
402443
UP/DOWN GLASS FIBER FOR MUFFLE
4
4
4
4
4
3220
402445
BACK FIBER GLASS FOR MUFFLE
2
2
2
2
2
3240
402442
GLASS FIBER FOR OVEN DOOR
4
4
4
3265
402441
GLASS FIBER FOR OVEN DOOR
2
2
2
2
2
3500
604075
SWITCH
2
2
2
2
2
3500
604075
SWITCH
2
2
2
2
2
3551
604076
SWITCH BLADE
2
2
2
2
2
3551
604076
SWITCH BLADE
2
2
2
2
2
3552
604077
SWITCH SUPPORT
2
2
2
2
2
2
2
2
1
1
3552
604077
SWITCH SUPPORT
2
2
4301
200486
SIDE PROFILE
1
1
4301
200471
SIDE PROFILE
4302
200487
SIDE PROFILE
4302
200472
LEFT SIDE PROFILE
4303
200489
DOWN SIDE PROFILE
4303
200491
DOWN SIDE PROFILE
4304
200490
DOWN SIDE PROFILE
1
1
1
1
1
1
1
1
1
4304
200492
DOWN SIDE PROFILE
4303
200489
DOWN SIDE PROFILE
1
1
1
1
4304
200490
DOWN SIDE PROFILE
1
1
4403
200470
DRIP DRAIN PROFILE
1
1
1
1
4405
200507
DRIP DRAIN PROFILE
1
1
4405
200488
DRIP DRAIN PROFILE
1
1
1
4529
201213
PROFILE
2
2
2
2
2
4531
202768
PROFILE
1
1
1
1
1
2
2
2
4548
1080052
SQUARE FOR HANDLE DOOR FIXING
1
1
4548
1080052
SQUARE FOR HANDLE DOOR FIXING
1
1
4550
202767
OVEN OVERLAPPING RAIL
2
2
1
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising