Miele | 25172451USA | Specifications Sheet | Miele 25192451USA Specifications Sheet

Miele 25192451USA Specifications Sheet
30” All Gas Range
HR 1124 G/LP
30” Dual Fuel Range
HR 1724 DF G/LP
HR 1924 DF G/LP
Shown: HR 1724 DF under DAR 1220
Please note: This information is subject to change
8mieleusa.com
Specification Sheet TRS 03192018
30” All Gas and Dual Fuel Range
SPECIFICATIONS
Overall Unit Dimensions
2915/16” (760 mm) W x 351/2” — 37” (902 — 940 mm) H x 261/2” (678 mm) D [Depth to control panel]
Oven Door Clearance
25” (635 mm)
Niche
30” (762 mm) W x 351/2” (902 mm) H
Minimum Cabinet Niche Opening
Gas
Gas Line Connection
1/2” NPT
Operational Altitudes
High Altitude
Electrical
Electrical Requirements
Power Cord
Plumbing
Miele Natural Gas and LP Ranges will function up to 9,800 ft. in altitude without adjustment. If an installation
exceeds these elevations, please contact rangejetkit@mieleusa.com.
HR 1124
Shipping Weight
HR 1124
HR 1724 DF
HR 1924 DF
-
An Inline water filter, like activated carbon, is required to
reduce mineral deposits. Do not connect to a Reverse
Osmosis (RO) water system. Connect to a cold water
supply only. Must be connected to a shut-off valve. The
water shut-off valve must be accessible after installation.
The water pressure must be between 14.5 and 145 psi
(1 and 10 bars). If the pressure is higher, install a pressure
reducing valve.
-
Supplied hose: flexible braided 4’11” (1.5 m) with 3/8” O.D.
compression fitting for connection to a shut off valve.The
total hose length must not exceed 24.5 ft. (7.5 m).
HR 1724 DF
337.3 lbs (153 kg)
HR 1924 DF
385.1 lbs (174.7 kg)
77/16” (950 mm) W x 52” (1,294 mm) H x 311/2” (800 mm) D
Shipping Dimensions
Installation Accessories
NEMA 14-30p, 5’ 11” (1.8m)
HR 1124
Plumbed Hose Connection
HR 1924 DF
120/208-240V, 60Hz, 30A
NEMA 5-15p, 5’ 11” (1.8m)
Plumbing Requirements
Shipping
HR 1724 DF
120V, 60Hz, 15A
HR 1124
HR 1724 DF
HR 1924 DF
12” Backguard
RBGAG1230
RBGDF1230
20” Backguard
RBGAG2030
RBGDF2030
40” Backsplash
RBS30
RBS30
Support
Call Miele
(800) 999-1360
Miele Website
8www.mieleusa.com
20/20 Link
82020technologies.com
HR 1124 DF
Item 25112451USA
HR 1724 DF
Item 25172451USA
HR 1924 DF
Item 25192451USA
HR 1124 DF LP
Item 25112452USA
HR 1724 DF LP
Item 25172452USA
HR 1924 DF LP
Item 25192452USA
Page 2 of 4
30” All Gas and Dual Fuel Range
PRODUCT DIMENSIONS
(x) = Toe-kick height adjustment 5” - 6 1/2” (127 mm - 165.1 mm)
E = Electrical connection
G = Gas connection
W = Water connection (HR 1924 Only)
SIDE VIEW
BULLNOSE DETAILS
(x) = Toe-kick height adjustment 5” - 6 1/2” (127 mm - 165.1 mm)
Page 3 of 4
30” All Gas and Dual Fuel Range
All Gas & DF 30” Range BTU Output
HR1x24 Burners
Gas Burners:
Total BTU Output
(1) 12,500 BTU (G/LP);
(3) 19,500 BTU (G/LP)
71,000 BTU (G/LP)
Oven Burners (HR1124 Only)
Oven Top
22,000 BTU (G);
Burners
20,150 BTU (LP)
Oven Bottom
Burner
25,500 BTU (G)
23,200 BTU (LP)
W = Water connection (HR 1924 DF only), G = Gas connection
Note:
Please observe safe distances to rear
combustible surfaces of 12” (305 mm)
clearances. For zero clearance
installation, Miele Backguards will
satisfy the required distance to
combustible surfaces. The Miele
Backguard is available in 12” (305 mm)
or 20” (508 mm) heights.
Page 4 of 4
Specification Sheet TRS 3192018
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising