Thermador | PRG366GH | Download Product Specs | Thermador PRG366GH Download Product Specs

PRG366GH
36-INCH GAS PRO HARMONY® RANGE
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
GENERAL PROPERTIES
Oven Capacity
5.0 cu. ft.
Cooking Modes - Main / Large Cavity
Bake, Convection Bake, Broil, Self Clean, Proof
Cooking Modes - Small Cavity
N/A
Programs
Sabbath Function
Cleaning Type
Self Clean
Type of Grate
Continuous Cast Iron
Controls
Metal Knobs
Sealed Burners
Yes
OVEN PERFORMANCE
Bake Power
20,000 BTU (NG)
Broil Power
27,000 BTU (NG)
Convection Power
N/A
Also Available:
BURNER PERFORMANCE
PRL366GH - LP
Total Number of Cooktop Burners
6
Total Cooktop BTU
136,000 (NG)
Power of Front Left Burner BTU
18,000-3,000 XLO (NG)
Power of Back Left Burner BTU
18,000-3,000 XLO (NG)
Power of Back Center Burner BTU
18,000 (NG)
Power of Front Center Burner BTU
18,000 (NG)
Power of Center 12" Electric Griddle (W)
N/A
- Professional style, continuous cast iron grates
Power of Center 12" Electric Grill (W)
N/A
- Truly Flush Mounted™, 24" standard cabinet depth
Power of Far Right 12" Electric Griddle (W)
N/A
Power of Back Right Burner BTU
18,000 (NG)
Power of Front Right Burner BTU
18,000 (NG)
FEATURES & BENEFITS
- Exclusive, patented Star® Burner–most even heating,
unsurpassed flame coverage
- QuickClean Base® designed for easy surface cleaning
- Precision simmering capabilities as low as 100°F (375 BTU)
with 2 ExtraLow® Simmer burners
TECHNICAL DETAILS
Circuit Breaker (A)
15 A
Volts (V)
120 V
Frequency (Hz)
60 Hz
Plug Type
120V-3 Prong
Power Cord Length (in)
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (HxWxD) (in)
35 7/8"–36 3/4" x
35 15/16" x 24 3/4"
Required Cutout Size (HxWxD) (in)
35 7/8"–36 3/4" x 36"
x 24"
72"
Adjustable Range Height (in.)
7/8"
Energy Source
Gas
Net Weight (lbs)
419 lbs
Gas Type
Natural Gas 15 mbar
(USA)
ACCESSORIES (INCLUDED)
Alternative Gas Type
Liquid Gas 27.5 mbar
(USA)
WARRANTY
1 X Island Trim, 3 X Full Access Telescopic Racks, 1 X Broiler Pan
Limited Warranty, Entire Appliance,
Parts and Labor
SEE PAGE 2 FOR OPTIONAL ACCESSORIES
T
HERMADOR EXCLUSIVE
Page 1 of 5
2 Year
PRG366GH
36-INCH GAS PRO HARMONY® RANGE
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
ACCESSORIES (OPTIONAL)
PAGRIDDLEN
Griddle for Indoor
Electric Grill
PA12CHPBLK
12" Cutting Board
PWOKRINGHC
Wok Ring
PA36GLBH
9" Low Backguard
PAKNOBLUNH
Blue Knob Pro Harmony Kit
PAGRIDDLE
Griddle
36-INCH RANGE DIMENSIONS
36-INCH RANGE CUTOUT DIMENSIONS
Page 2 of 5
PRG366GH
36-INCH GAS PRO HARMONY® RANGE
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
36-INCH RANGE CUTOUT DIMENSIONS
as defined in the “National Fuel Gas Code” (ANSI Z223.1,
as defined
inClearances
the “National
Fuel Gas Code”materials
(ANSI Z223.1,
Current
Edition).
from non-combustible
are
not partEdition).
of the ANSI
Z21.1 scopefrom
and are
not certified by
Current
Clearances
non-combustible
materials
CSA.
of less
(305 mm)
must
be approved
are Clearances
not part of
thethan
ANSI12”Z21.1
scope
and
are not certified by
by the local codes and/or by the local authority having
CSA. Clearances of less than 12” (305 mm) must be approved
jurisdiction.
by the local codes and/or by the local authority having
jurisdiction.
Page 3 of 5
PRG366GH
36-INCH GAS PRO HARMONY® RANGE
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
Installation Clearances with Low Backguard
36-INCH RANGE DIMENSIONS AND CLEARANCE REQUIREMENTS WITH “LOW BACK”
NOTE: A 36-inch
minimum clearance is
required between the top
of the cooking surface
and the bottom of an
unprotected cabinet. A
30-inch clearance can be
used when the bottom
of the wood or metal
cabinet is protected by
not less than 1/4 inch of a
flame retardant material
covered with not less
than No. 28 MSG sheet
steel, 0.015 inch (0.4 mm)
thick stainless steel, 0.024
inch (0.6 mm) aluminum,
or 0.020 inch (0.5 mm)
thick copper.
Combustible
Materials
36" (914 mm) min.
to combustible
materials
28" (711 mm)
27¼" (692 mm)
Low Back
9" (229 mm)
245/8" (625 mm)
24" (610 mm)
max. recess depth
35 ¾" (908 mm) Min.
37 ¼" (946 mm) Max.
24¾" (629 mm)
23" (584 mm)
447/8" (1140 mm)
Total Clearance
As defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition).
Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 12" (305 mm)
must be approved by the local codes and/or by the local authority having jurisdiction.
Page 4 of 5
Combustible
Back Wall
PRG366GH
36-INCH GAS PRO HARMONY® RANGE
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
Installation Clearances with Flush Island Trim
36-INCH RANGE DIMENSIONS AND CLEARANCE REQUIREMENTS WITH “FLUSH ISLAND TRIM”
Combustible
Materials
36" (914 mm) min.
to combustible
materials
12" (305 mm) min. to
combustible surface
with Flush Island Trim
Shaded area behind
range indicates
minimum clearance
to combustible surfaces,
combustible materials
cannot be located within
this area.
28" (711 mm)
27¼" (692 mm)
For Flush Island
Trim installations,
counter surface should
have a cantilever edge
meeting the back
section of the Flush
Island Trim accessory.
245/8" (625 mm)
Cantilever
35¾" (908 mm) Min.
37¼" (946 mm) Max.
24" (610 mm)
max. recess depth
24¾" (629 mm)
If an inner wall
is used under
the cantilever counter
top, there should be a
1/8" (3 mm) gap from
the rear of the range
to the inner wall.
23" (584 mm)
447/8" (1140 mm)
Total Clearance
As defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition).
Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 12" (305 mm)
must be approved by the local codes and/or by the local authority having jurisdiction.
These warranties give you specific legal rights and you may have other rights that vary from state to state. Full warranty and limited warranty from date of installation. For complete warranty
details, refer to your Use & Care manual, or ask your dealer.
Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation
engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model
number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada.
Thermador is not responsible for products that are transported from the U.S. for use in Canada.
1 800 735 4328 | USA THERMADOR.COM | CANADA THERMADOR.CA | ©2015 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED.
Page 5 of 5
04 / 15
Download PDF

advertising