Miele 36632200USA Installation instructions


Add to my manuals
80 Pages

advertisement

Miele 36632200USA Installation instructions | Manualzz
Operating and Installation Instructions
Wine conditioning unit
To prevent accidents and machine damage, read these instructions before installation or use.
en-US
M.-Nr. 10 531 320
Contents
IMPORTANT SAFETY INSTRUCTIONS ................................................................ 5
Caring for the environment ................................................................................ 13
How to save energy............................................................................................. 14
Guide to the appliance ........................................................................................ 15
Explanation of symbols ......................................................................................... 16
Door opening aid................................................................................................... 18
Accessories ......................................................................................................... 19
Accessories supplied ............................................................................................ 19
Optional accessories............................................................................................. 19
Switching the appliance on and off ...................................................................
Before first use ......................................................................................................
Operating the wine conditioning unit ....................................................................
Switching the wine conditioning unit on ..........................................................
Switching the wine unit off ...............................................................................
Turning off the wine unit in Sabbath mode ......................................................
Turning off for longer periods of time ....................................................................
20
20
20
20
21
21
22
Selecting additional settings ..............................................................................
Safety lock  ........................................................................................................
Acoustic signals ...............................................................................................
Display brightness  ............................................................................................
Sabbath mode  ...................................................................................................
23
23
24
25
26
Optimum temperature and air quality ...............................................................
Temperature ..........................................................................................................
Setting the temperature....................................................................................
Temperature range ...........................................................................................
Temperature display .........................................................................................
Air quality and humidity.........................................................................................
DynaCool (constant humidity)  .....................................................................
Air filtration with the Active AirClean filter ........................................................
28
28
29
30
30
31
31
32
Temperature and door alarm.............................................................................. 33
Feature lighting....................................................................................................
Turning the feature lighting on and off...................................................................
Setting the brightness of the feature lighting ...................................................
Lighting duration of the feature lighting ...........................................................
2
35
35
35
36
Contents
Storing wine bottles ............................................................................................
Wooden shelves ....................................................................................................
Moving the wooden shelves.............................................................................
Adjusting the wooden shelves .........................................................................
Labeling wooden shelves .................................................................................
Inserting the decor shelf...................................................................................
Maximum capacity ................................................................................................
37
37
38
39
39
40
40
Automatic defrosting .......................................................................................... 41
Cleaning and care ...............................................................................................
Cleaning agents.....................................................................................................
Before cleaning the wine conditioning unit ...........................................................
Interior, accessories and appliance door .............................................................
Cleaning the ventilation grilles...............................................................................
Cleaning the door seal ..........................................................................................
Cleaning the air filter..............................................................................................
42
42
43
43
43
43
44
Active AirClean filter ........................................................................................... 45
Replacing the Active AirClean filter ....................................................................... 45
Frequently asked questions ............................................................................... 47
Causes of noises ................................................................................................. 52
Technical Service................................................................................................. 53
MieleCare .............................................................................................................. 53
Information for dealers ....................................................................................... 54
Demo mode ........................................................................................................ 54
Electrical connection .......................................................................................... 56
Installation information .......................................................................................
Installation location ...............................................................................................
Side-by-side ..........................................................................................................
Climate class .........................................................................................................
Ventilation ..............................................................................................................
Before installing the wine conditioning unit...........................................................
Door opening angle limiter ....................................................................................
Installation dimensions..........................................................................................
View from above...............................................................................................
57
57
57
58
59
59
60
61
62
Adjusting the door hinge .................................................................................... 63
Reversing the door hinge ................................................................................... 64
3
Contents
Installing the wine conditioning unit..................................................................
Setting up the wine conditioning unit....................................................................
Aligning the wine conditioning unit to taller furniture doors .............................
Pushing the wine conditioning unit into the niche.................................................
Securing the wine conditioning unit in the niche ..................................................
Adjusting the lateral alignment of the appliance door......................................
4
69
70
72
73
73
75
IMPORTANT SAFETY INSTRUCTIONS
When using the appliance, follow basic safety precautions, including the following:
Read all instructions before installation and use to prevent accidents and machine damage.
This wine conditioning unit complies with all statutory safety requirements. Please note that inappropriate use can lead to personal injury and damage to property.
To avoid the risk of accidents and damage to the appliance,
please read these instructions carefully before using it for the first
time. They contain important notes on installation, safety, use and
maintenance.
Miele cannot be held liable for non-compliance with these instructions.
Keep these instructions in a safe place and ensure that new users
are familiar with the contents. Pass them on to any future owner.
 Glass breakage!
Danger of injury from broken glass.
If installed at altitudes above 4,900 ft (1,500 m) there is a risk of
the glass in the door breaking because of changes in air pressure.
Shards of glass can cause severe injury if not handled with care.
Use
 This wine conditioning unit is intended for use in domestic households and similar working and residential environments.
It is not intended for outdoor use.
 The wine conditioning unit is intended for domestic use only for
storing wine.
It must not be used for any other purpose.
5
IMPORTANT SAFETY INSTRUCTIONS
 The wine conditioning unit is not suitable for storing and keeping
cool medicines, blood plasma, laboratory preparations or other such
materials or products. Incorrect use of the wine conditioning unit for
such purposes can cause deterioration of the items stored. The wine
conditioning unit is not suitable for use in areas where there is a risk
of explosion.
Miele cannot be held liable for damage resulting from improper or incorrect use of the appliance.
 Persons who lack physical, sensory or mental abilities, or experience with the appliance should not use it without supervision or instruction by a responsible person..
Those persons may operate the wine conditioning unit unsupervised
only if they have been shown how to use it in a safe way and recognize and understand the consequences of incorrect operation.
Children
 Children near the wine conditioning unit must be supervised. Do
not let children play with the wine conditioning unit.
 Ensure that any packing material is disposed of safely and kept
out of the reach of children. Danger of suffocation!
Technical safety
 If the power cord is damaged, it must be replaced by a Miele authorized technician in order to protect the user from harm.
 The coolant system is tested for leaks. The wine conditioning unit
complies with statutory safety requirements and the appropriate directives.
6
IMPORTANT SAFETY INSTRUCTIONS
 This appliance contains the refrigerant Isobutane (R600a), a natural gas which is environmentally friendly. Although it is combustible,
it does not damage the ozone layer and does not increase the greenhouse effect.
The use of this refrigerant has, however, led to a slight increase in
the noise level of the appliance. In addition to the noise of the compressor, you might be able to hear the refrigerant flowing around the
system. This is unavoidable, and does not have any adverse effect
on the performance of the appliance.
Care must be taken during the transportation and setting up of the
appliance that no parts of the cooling system are damaged. Leaking
refrigerant can cause severe irritation to the eyes.
In the event of any damage:
– avoid open flames and anything that creates a spark,
– disconnect the appliance from the electrical power supply,
– air the room where the wine conditioning unit is located for several minutes, and
– contact Miele Technical Service
7
IMPORTANT SAFETY INSTRUCTIONS
 The more coolant there is in a wine conditioning unit, the larger
the room it should be installed in. In the event of a leakage, if the appliance is in a small room, there is the danger of combustible gases
building up. For every 0.28 oz (8 g) of coolant at least 35.3 cubic feet
(1 m3) of room space is required. The amount of coolant in the wine
conditioning unit is stated on the data plate inside the appliance.
 To avoid the risk of damage to the wine conditioning unit, make
sure that the connection data (fuse rating, frequency and voltage) on
the data plate corresponds to the household supply.
Check that this is the case before connecting the wine conditioning
unit. Consult a qualified electrician if in any doubt.
 The electrical safety of the wine conditioning unit can only be
guaranteed when correctly earthed. It is essential that this standard
safety requirement is met. If in any doubt please have the electrical
installation tested by a qualified electrician.
 Reliable and safe operation of the wine conditioning unit can only
be guaranteed if it is connected to the power supply.
 Do not connect the appliance to the electrical supply with a power
bar or extension cord. These are a fire hazard and do not guarantee
the required safety of the appliance.
 Do not use the appliance in areas where there may be moisture or
splashing water (e.g., garages, laundry rooms, etc.). Moisture can
reach the electrical components and cause a short circuit.
8
IMPORTANT SAFETY INSTRUCTIONS
 This wine conditioning unit must not be used in a non-stationary
location (e.g. on a ship).
 Before installation and use check the wine conditioning unit for
any visible damage. Do not operate or install a damaged appliance.
 To ensure safe operation, use the wine conditioning unit only
when it has been installed.
 The wine conditioning unit must be disconnected from the power
supply during installation, maintenance and repair work. The appliance is only disconnected from the power supply if:
– the circuit breaker has been tripped, or
– the screw-type fuses on the electrical service panel have been removed or
– the power cord has been unplugged. Pull on the plug and not on
the cord when removing it from the outlet.
 Installation, repair, and maintenance work should only be performed by a Miele-authorized service technician.
Work by unqualified persons could be dangerous and may void the
warranty.
 Repairs and other work performed by unauthorized persons could
be dangerous and may void the warranty.
 Defective components should only be replaced by Miele original
parts. Only with these parts can the manufacturer guarantee the
safety of the appliance.
9
IMPORTANT SAFETY INSTRUCTIONS
Proper use
 The wine conditioning unit is designed for use within a certain climate range (ambient temperatures) and should not be used outside
this range. The climate range for your wine conditioning unit is stated
on the data plate inside the appliance. Installing it in a room with too
low an ambient temperature will cause the compressor to shut down
for longer periods of time so that the unit cannot maintain the required temperature.
 Do not cover or block the air vents. This can impair the efficiency
of the appliance, increase the power consumption and cause damage to the appliance.
 If the wine conditioning unit is used for storing food which contains fat or oil, make sure that it does not come into contact with
plastic components as any spillages of oil or fat could cause stress
cracks to the plastic and cause it to break or split.
 Do not store explosive materials in the wine conditioning unit or
any products containing propellants (e.g. spray cans). Electrical
components could cause flammable vapors to ignite. Danger of fire
and explosion.
 Do not operate any electrical equipment inside the wine conditioning unit. Danger of sparking and explosion.
 Use only genuine original Miele parts. If parts or accessories from
other manufacturers are used, the warranty may become invalid.
10
IMPORTANT SAFETY INSTRUCTIONS
Cleaning and care
 Do not use any oil or grease on the door seals.
They can cause the seals to deteriorate over time.
 Do not use a steam cleaning appliance to clean this wine conditioning unit.
The steam could reach electrical components and cause a short circuit.
 Sharp edged or pointed objects will damage the evaporator, causing irreversible damage to the wine conditioning unit. Do not use
sharp edged or pointed objects to
– remove frost and ice,
– remove labels, stickers etc.
California Proposition 65
 WARNING
This product can expose you to chemicals including vinyl chloride,
which is known to the State of California to cause cancer and birth
defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
11
IMPORTANT SAFETY INSTRUCTIONS
Transport
 Always transport the wine conditioning unit in an upright position
and in its original transport packaging to avoid damage in transit.
 Danger of injury and damage. The wine conditioning unit is very
heavy and must be transported by two people.
Disposing of your old appliance
 There is a risk of suffocation. Children playing can shut themselves in and suffocate.
– Take the door(s) off.
– Remove the drawers.
– Leave the storage shelves in the appliance so that children cannot
easily climb into the appliance.
 Danger of electric shock.
– Cut off the plug from the power cord and discard.
– Cut off the power cord from the discarded appliance. Dispose of
separately from the appliance.
 Ensure during and after disposal that the appliance isn't stored in
the vicinity of gasoline or other flammable vapors and liquids.
 When disposing of the appliance, ensure that the refrigeration circuit is not damaged to prevent uncontrolled escape of the refrigerant
it contains (data on type plate) and oil.
 Splashes of coolant can cause damage to the eyes. Be careful not
to damage any part of the pipework while awaiting disposal, e.g. by
– puncturing the coolant channels in the evaporator,
– kinking any pipework,
– scratching the surface coating.
12
Caring for the environment
Disposal of packaging material
Disposal of your old appliance
The packaging is designed to protect
the wine conditioning unit from damage
during transportation. The packaging
materials used are selected from materials which are environmentally friendly
for disposal and should be recycled.
Electrical and electronic appliances
contain valuable materials. They also
contain certain substances, compounds
and components which were essential
for the proper functioning and safe use
of the equipment. Handling these materials improperly by disposing of them in
your household waste can be harmful to
your health and the environment. Therefore, please do not dispose of your old
appliance with regular household waste
and follow local regulations on proper
disposal.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children. Return
the packaging to your dealer.
Consult with local authorities, dealers or
Miele in order to dispose of and recycle
electrical and electronic appliances.
Miele assumes no responsibility for
deleting any personal data left on the
appliance being disposed.
Take care not to damage the pipework
at the back of your wine conditioning
unit before or during transportation to
an authorized, environmentally friendly
collection depot.
This way, coolant in the pipework and
oil in the compressor will be contained,
and will not leak into the environment.
Please ensure that your old appliance
does not pose a danger to children
while being stored prior to disposal.
See "IMPORTANT SAFETY INSTRUCTIONS" for more information.
13
How to save energy
Installation /
Maintenance
Normal
energy consumption
Increased
energy consumption
In a well-ventilated room.
In an enclosed, poorly ventilated room.
Protected from direct sunlight.
In direct sunlight.
Away from a heat source (ra- Near a heat source (radiator,
diator, oven).
oven).
Where the ideal room temperature is approx. 68°F
(20°C).
Where there is a high ambient room temperature.
Air vents uncovered and
dusted regularly.
Air vents covered or dusty.
Remove and clean the air fil- If dust has accumulated on
ter with a vacuum cleaner at the air filter.
least once a year.
Temperature
setting
50° to 54°F / 10° to 12°C
Use
Wooden shelves arranged
as they were when the appliance was delivered.
14
The lower the temperature in
the appliance, the higher the
energy consumption.
Only open the door when
necessary and for as short a
time as possible. Store wine
bottles in an organized way.
Frequent opening of the
door for long periods will
cause a loss of coldness.
The wine conditioning unit
works harder to cool down
and the compressor runs for
longer periods.
Do not overfill the appliance
in order to allow the air to
circulate.
Poor air circulation will
cause a loss of coldness.
Guide to the appliance
Control panel
a For switching the whole
appliance on and off
f For setting the temperature
( colder)
b Optical interface
(for Miele Service only)
g For confirming a selection (OK sensor)
c For selecting the upper or lower wine h For setting the temperature
conditioning zone
( warmer)
d On/Off sensor for the DynaCool func- i For accessing or leaving the
tion (constant humidity)
Setting mode
e For activating/deactivating the feature lighting
j For deactivating the
temperature and door alarm
k Display with temperature display and
symbols (symbols only visible in Setting mode; see chart for an explanation of the symbols)
15
Guide to the appliance
Explanation of symbols
Symbol
Meaning
Function

Safety Lock
Safety feature to prevent inadvertent
switching off or changing of settings

Acoustic signals
Choice of sensor tone and door alarm tone

Miele@home (if available)
Only visible when the Miele@home communication module or communication stick is
used (see "Miele@home")

Demo mode
(only visible when
Demo mode is active)
For turning off Demo mode

Display Brightness
Settings
For adjusting the brightness of the display

Active AirClean filter
Lights up when the filter needs changing

Sabbath Mode
For turning Sabbath mode on and off

Power supply
Confirms that the wine conditioning unit is
connected to the power supply when it is
not switched on; flashes in the event of a
power outage

Alarm
Lights up when there is a door alarm;
flashes when there is a temperature alarm,
power outage or other malfunctions
16
Guide to the appliance
a Push2open door catch
b Lighting strip (in both wine conditioning zones)
c Active AirClean filter
d Control panel for the upper and lower wine conditioning zones / isolation plate
for thermal separation of the zones
e Isolation strips for thermal separation of the zones
f Wooden shelves with labels (FlexiFrames with Noteboard)
g Rack
h Safety glass door with
UV filter
i Ventilation grille with air filter
17
Guide to the appliance
Door opening aid
The Push2open door catch on your
wine conditioning unit makes it easy to
open the door. The appliance door is
sensitive to pressure.
The Push2open system is deactivated
at the factory. The system has to be
activated by touching the On/Off sensor only when the appliance has been
installed in the niche.
Opening the door
 Press briefly against the appliance
door and then release it. The appliance door opens slightly.
 Then pull the door fully open.
To protect against inadvertent opening: if you do not open the door wider,
it closes again by itself after approx. 3
seconds.
Closing the door
 Push the door shut.
 Risk of damage!
To avoid damage to the door opening aid:
Do not obstruct the appliance door
while it is opening.
Do not push in or hold onto the door
catch while the door is closing.
18
Please note that using magnets directly in front of the wine conditioning
unit door can cause it to open unintentionally. This is caused by the door
closing mechanism on the wine conditioning unit.
Accessories
Accessories supplied
Optional accessories
Chalk
A range of useful Miele accessories and
care products are available for your
wine conditioning unit.
Use the chalk supplied to write on the
magnetic strips on the wooden shelves
for easy identification of the wines in
storage.
Active AirClean filter
The Active AirClean filter ensures optimum air exchange and therefore excellent air quality in the wine conditioning
unit.
Air filter
The air filter behind the ventilation grille
protects the cooling system from dust.
Active AirClean filter
See "Accessories supplied" for a description.
Side-by-side merge kit
For high quality side-by-side combination of two wine conditioning units.
Optional accessories are available
from Miele, your Miele dealer or online
via the Miele website.
19
Switching the appliance on and off
Before first use
Packaging material
 Remove all packaging material from
the inside of the appliance.
Protective foil
Stainless steel surfaces have a layer of
protective foil to prevent scratching during transportation.
 Do not remove the foil until the wine
conditioning unit has been installed in
its final location. Start at one of the
top corners.
Cleaning
Operating the wine conditioning unit
A light touch of the finger on the sensors is all that is required to operate this
wine conditioning unit.
A tone will sound each time a sensor is
touched. You can deactivate this if you
wish (see "Selecting additional settings
- Acoustic signals").
Switching the wine conditioning unit
on
When the wine conditioning unit is connected to the power supply, the power
connection symbol  will appear in the
display after a short while.
Please refer to the relevant instructions in "Cleaning and care".
 Clean the inside of the appliance and
the accessories.
 Touch the On/Off sensor.
The power connection symbol  will
go out and the wine unit will start to
cool.
The sensors for the upper and lower
wine conditioning zones will then appear in the control panel. The selected
wine conditioning zone will be highlighted yellow and the temperature of
the selected zone will show in the display.
The first time the appliance is turned
on, the sensors for the wine conditioning zones and the alarm symbol ; will
flash until the selected temperature has
been reached in the zones.
As soon as the set temperature has
been reached, the sensor for the respective wine conditioning zone will
light up constantly. The alarm sym-
20
Switching the appliance on and off
bol  will go out as soon as the set
temperatures have been reached in
each zone.
Switching the wine unit off
The interior lighting will come on when
the door is opened.
A different setting can be set for each
zone.
 To do this, touch the sensors for the
wine conditioning zone for which you
want to adjust the settings.
The selected sensor is highlighted in
yellow. You can now
– set the temperature,
 Touch the On/Off sensor.
If this is not possible, the safety lock
 is activated.
The sensors in the control panel for the
two wine conditioning zones will go out.
The temperature will go out in the display and the power connection symbol
 will appear.
– activate the DynaCool function.
The interior lighting goes out and cooling is turned off.
Please refer to the relevant section for
more information.
Turning off the wine unit in Sabbath
mode
If you then select the other wine conditioning zone, the settings for the previously selected zone will remain unchanged.
You can turn the wine unit off at any
time.
 Touch the On/Off sensor.
The sensors for the two wine conditioning zones will go out in the control
panel.
The temperature shown in the display
will go out and the power connection
symbol  appears.
The interior lighting goes out and cooling is turned off.
As soon as the wine unit is turned on
again the Sabbath mode is switched
off.
21
Switching the appliance on and off
Turning off for longer periods
of time
If the wine conditioning unit will not be
used for a longer period of time,
 turn off the wine conditioning unit,
 unplug the power cord or trip the circuit breaker,
 clean the appliance and
 leave the door ajar to air the wine
conditioning unit and avoid odors
building up inside it.
If, during a long absence, the wine
conditioning unit is turned off but not
cleaned and the door left shut, there
is a risk of mildew building up inside
the appliance.
22
Selecting additional settings
Certain settings on the wine conditioning unit can only be selected in settings
mode.
The door alarm is automatically disabled when the appliance is in settings mode.
Safety lock 
 By touching the  or  sensor, you
can now select whether the safety
lock is activated or deactivated:
0: the safety lock is deactivated
1 : the safety lock is activated.
The safety lock can be activated to prevent:
– the appliance being turned off by
mistake,
– the temperature being changed by
mistake,
– DynaCool being turned on by mistake,
 Touch the OK sensor to confirm your
selection.
The selected setting will be adopted
and the  symbol will flash.
– the feature lighting being turned on
by mistake.
Activating and deactivating the safety
lock
 Touch the settings sensor.
 Touch the settings sensor to leave the
settings mode.
Otherwise the appliance will exit the
settings mode automatically after approximately one minute.
The  symbol will appear in the display
when the safety lock is activated.
All symbols available for selection will
appear in the display and the  symbol
flashes.
 Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the  symbol lights up in the display.
23
Selecting additional settings
Acoustic signals 
The wine conditioning unit has audible
tones such as the sensor tone and the
door and temperature alarms.
You can turn the sensor tone or the
acoustic door alarm on or off, but you
cannot turn off the temperature alarm.
There are four settings to choose from.
Option 3 is set at the factory, this
means that the sensor tone and the
door alarm are turned on.
 By touching the  or  sensors you
can now select the following:
0 : Sensor tone off; Door alarm off
1 : Sensor tone off; Door alarm on
(after 4 minutes)
2: Sensor tone off; Door alarm on
(after 2 minutes)
3 : Sensor tone on; Door alarm on
(after 2 minutes).
Turning acoustic tones on or off
 Touch the settings sensor.
All symbols available for selection will
appear in the display and the  symbol flashes.
 Touch the sensors for setting the
temperature ( or ) repeatedly until
the  symbol flashes in the display.
 Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the  symbol lights up in the display.
24
 Touch the OK sensor to confirm your
selection.
The selected setting will be adopted
and the  symbol will flash.
 Touch the settings sensor to leave the
settings mode.
Otherwise the appliance will exit the
settings mode automatically after approximately one minute.
Selecting additional settings
Display brightness 
You can adjust the brightness of the
display to suit the ambient light conditions in the room.
The display brightness can be adjusted
incrementally from 1 to 3. The factory
default setting is 3 (maximum brightness).
Changing the brightness of the display
 Touch the settings sensor.
All symbols available for selection will
appear in the display and the  symbol flashes.
 Touch the sensors for setting the
temperature ( or ) repeatedly until
the  symbol flashes in the display.
 By touching the  or  sensor, you
can now alter the brightness of the
display:
1 : Dimmest setting
2 : Medium setting
3 : Brightest setting.
 Touch the OK sensor to confirm your
selection.
The selected setting will be adopted
and the  symbol will flash.
 Touch the settings sensor to leave the
settings mode.
Otherwise the appliance will exit the
settings mode automatically after approximately one minute.
 Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the  symbol lights up in the display.
25
Selecting additional settings
Sabbath mode 
Turning on Sabbath mode
The Sabbath mode supports the observance of religious customs.
The following are turned off:
– the interior lighting when the door is
opened,
– all acoustic and optical signals
– the temperature display,
 Touch the Settings sensor.
All symbols available for selection will
appear in the display and the  symbol flashes.
– the DynaCool function (if previously
activated),
The following can be selected:
– the Settings sensor for turning off
Sabbath mode
 Touch the sensors for setting the
temperature ( or ) repeatedly until
the  symbol flashes in the display.
– and the On/Off sensor
The Sabbath mode function will turn itself off automatically after approx. 120
hours.
Ensure that the wine unit door is properly closed as visual and audible
alarms are turned off.
 Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the  symbol lights up in the display.
Any interruption to the power supply
during this time will not be shown in
the display. After a power cut, the appliance restarts in Sabbath mode.
 By touching the  or  sensor you
can now switch on Sabbath mode. To
do this, select the 1 setting.
 Touch the OK sensor to confirm your
selection.
The selected setting is applied, the 
symbol lights up.
26
Selecting additional settings
As soon as the  symbol goes out in
the display after 3 seconds, Sabbath
mode is switched on.
 Turn off Sabbath mode after the Sabbath has passed.
Turning off Sabbath mode
 Touch the Settings sensor to leave
Sabbath mode.
The temperature will appear in the display and the interior lighting will come
on.
27
Optimum temperature and air quality
Wine continues to mature depending on
the surrounding conditions. The length
of time for which wine can be kept in
good condition will therefore depend
not only on the temperature but also on
the air quality.
Type of wine
Recommended
drinking temperature
Light, fruity red
wines:
57° to 61°F (14°
to 16°C)
The wine conditioning unit with its constant ideal temperature, increased air
humidity and odor-free atmosphere offers the perfect conditions for storing
your wine.
Full-bodied
red wines:
64°F (18°C)
Rosé wines:
46° to 50°F (8° to
10°C)
The wine conditioning unit also guarantees a vibration-free environment (in
contrast to a refrigerator) so that the
maturing process is not disturbed.
Temperature
Wine can be stored at a temperature
between 42° and 64°F (6° and 18°C). If
you are storing white and red wines together, select a temperature between
53° and 57°F (12° and 14°C). This is
suitable for both white and red wines.
Red wine should be taken out of the
wine conditioning unit and opened at
least two hours before drinking to allow
it to breathe and develop its aroma.
At too high a temperature (over 72°F /
22°C), wine matures too quickly, which
prevents the aromas from developing
further. Wine cannot mature fully at too
low a temperature (below 41°F / 5°C).
Fluctuations in temperature put wine
under stress and interrupt the maturing
process. It is therefore very important to
maintain a constant temperature.
28
Delicate, aromatic 46° to 54°F (8° to
white wines:
12°C)
Full-bodied or
sweet white
wines:
46° to +57°F (12°
to 14°C)
Champagne,
sparkling white
wines:
43° to 50°F (6° to
10°C)
Tip: Store the wine 1° or 2°C cooler
than the recommended drinking temperature as it warms up a little when
poured into the glass.
Tip: Full-bodied reds should be opened
for 2-3 hours before drinking to allow it
to breathe and develop its aroma.
Optimum temperature and air quality
Safety device in case of low ambient
temperatures
The appliance is equipped with a safety
thermostat to protect your wine against
a sharp drop in temperature. If the external temperature should drop below
this level, a heater element turns on automatically to keep the temperature inside as constant as possible. If the ambient temperature continues to fall, the
appliance switches itself off automatically.
Isolation plate for thermal separation
The wine unit comes with a fixed isolation plate that divides the interior of the
unit into two separate temperature
zones. This allows you to store different
types of wine at the same time, e.g., red
wine and Champagne.
The isolation strips inside the glass
door prevent the exchange of heat between the individual zones.
Setting the temperature
The temperatures in the wine conditioning zones can be set independently of
one another.
 Touch the sensor for the zone for
which you wish to change the temperature so that it is highlighted in
yellow.
The current temperature for the selected zone appears in the display.
 Use the two sensors underneath the
display to set the temperature.
By touching the sensor
– the temperature will get colder
– the temperature will get warmer.
29
Optimum temperature and air quality
Temperature range
In both zones, it is possible to set the
temperature between 5°C and 20°C.
 Touch the OK sensor to confirm your
selection
or
 wait about 5 seconds after the last
touch of the sensor.
The temperature being set will flash in
the display.
When you touch the sensors, you will
see the following changes in the display:
– With the first touch: The last temperature selected flashes.
– Each subsequent touch of the sensor: The temperature changes in 1°C
increments.
– Keeping your finger on the sensor:
The temperature changes continuously.
A tone will sound (if the keypad tone
is switched on) when the lowest or
highest possible temperature is
reached.
Approximately 5 seconds after a sensor
has last been touched, the current
temperature inside the appliance is
shown automatically.
When the temperature is altered, there
is a short delay until the temperature
selected is set.
The temperature display in the control
panel always shows the actual temperature.
30
Temperature display
In normal operation, the temperature
display shows the actual temperature in
the zone.
If the temperature in one of the zones is
not within the range that the appliance
is able to display, dashes will light up in
the temperature display.
Depending on the ambient temperature
and the temperature setting, it can take
the appliance a few hours to reach the
temperature required and for this temperature to then be shown as a constant temperature in the display.
Optimum temperature and air quality
Air quality and humidity
DynaCool (constant humidity) 
A conventional refrigerator with its low
humidity level is not the best place to
store wine. It is very important to store
wine in an atmosphere with a high humidity level so that the corks remain
moist on the outside. Low humidity
causes corks to dry out from the outside, and so do not seal the bottles as
tightly. Wine should be stored lying
down to keep the corks moist from the
inside too. Air entering the bottle will inevitably spoil the wine.
DynaCool raises the relative humidity
inside the appliance. It also distributes
the humidity and the temperature
evenly around the interior so that you
can store all your wine under the same
excellent conditions.
This will create a stable climate in the
unit which imitates that of a wine cellar.
Do not introduce additional moisture
into the air, e.g. by placing a dish of
water in the appliance. This will lead
to condensation on the interior walls,
which can cause corrosion damage.
Turning on DynaCool
If you would like to use the wine conditioning unit for long term wine storage,
we recommend that you keep the DynaCool function turned on.
 Touch the sensor to turn the DynaCool function on/off. The sensor will
be highlighted in yellow.
Even if DynaCool has not been turned
on, the fans in the appliance will come
on automatically when the cooling
system turns on. This ensures the optimum climate for your wine is maintained.
The fans automatically turn off when
the door is open.
31
Optimum temperature and air quality
Turning off DynaCool
The appliance uses slightly more energy
and is a little noisier when the DynaCool
function is turned on. You can turn it off
occasionally if desired.
 Touch the On/Off sensor of the DynaCool function so that it is no longer
highlighted in yellow.
Air filtration with the Active AirClean
filter
The Active AirClean filter achieves optimum air quality by filtering the incoming
air.
Fresh air from the room enters the appliance via the Active AirClean filter.
The fans (DynaCool function) then distribute the air evenly throughout the
wine conditioning unit.
Filtering the incoming air through the
Active AirClean filter ensures that all air
entering the appliance is fresh and free
from dust and odors.
This also ensures your wine does not
absorb any unwanted odors through
the corks.
Replace the Active AirClean filter regularly. The  symbol will appear in the
display to remind you (see "Active AirClean filter").
32
Temperature and door alarm
The appliance is equipped with an
alarm system so that the temperature
cannot rise or fall unnoticed, which
could possibly damage the wine.
Switching the temperature alarm off
early
If the acoustic alarm disturbs you, it can
be switched off.
Temperature alarm
If the temperature in one of the wine
conditioning zones rises or falls by a
certain amount, the sensor for that zone
will flash in the control panel and at the
same time the alarm symbol  will
flash in the display.
An alarm will also sound.
The audio and visual signals are triggered, for example:
– when the wine unit is switched on
and the temperature in one of the
temperature zones differs greatly
from the set temperature,
 Touch the sensor to turn off the temperature alarm.
The alarm will stop.
The relevant wine conditioning zone will
continue to flash in the control panel
and the alarm symbol  will continue
to flash in the display until the cause of
the alarm has been rectified.
– when too much warm ambient air enters the wine unit when bottles are
being rearranged or taken out,
– when a large number of bottles are
stored for the first time,
– in the event of a power cut.
As soon as the cause of the alarm has
been rectified, the alarm will stop and
the alarm symbol  will go out. The
sensor for the relevant zone will light up
constantly again.
33
Temperature and door alarm
Door alarm
The alarm will sound if the door of the
wine unit is left open for more than approx. two minutes. The wine conditioning zone sensors will flash in the control
panel. The alarm symbol  will light up
in the display.
The alarm will stop when the door is
shut. The wine conditioning zone sensors and the alarm symbol  will go
out.
Turning the door alarm off early
If the acoustic alarm disturbs you, it can
be switched off.
 Touch the sensor to turn off the door
alarm.
The alarm will stop.
The wine conditioning zone sensors will
continue to flash and the alarm symbol
 will remain lit up until you close the
door.
If the audible tone does not sound in
the event of a door alarm, then the audible tone has been turned off in Setting mode (see "Selecting additional
settings - Audible tones").
34
Feature lighting
The interior lighting can be set to remain on when the door is closed so
your wines can be on display at all
times.
Setting the brightness of the feature
lighting
The brightness of the feature lighting
can be adjusted.
Each wine conditioning zone has its
own lighting strip so all zones are illuminated.
Thanks to the use of LED lighting, the
wine will not be adversely affected by
heat or UV light.
Turning the feature lighting on
and
off.
 Touch the On/Off sensor for the feature lighting so that it is highlighted in
yellow.
The interior lighting is now turned on,
even when the door is closed.
 Touch the On/Off sensor for the feature lighting so that it is highlighted in
yellow.
 Touch the sensor for the feature lighting again (approx. four seconds), until
the  symbol flashes in the display (after two seconds the  symbol
flashes).
 Use the sensors for altering the temperature to set the feature lighting
brightness ( and  ). To do this
touch and hold the sensors. The
brightness is adjusted directly and is
infinitely variable.
By touching the sensor
To turn the feature lighting off again
 touch the On/Off sensor for the feature lighting so that it is highlighted in
yellow.
– the lighting becomes dimmer
The interior lighting is now turned off
when the door is closed.
– the lighting becomes brighter
 Touch the OK sensor to confirm your
choice.
35
Feature lighting
The selected brightness is saved and
the temperature reappears in the display.
As soon as the appliance door is
closed, the set brightness for the feature lighting takes effect. When the appliance door is opened, the interior
lighting returns to its normal level.
By touching the sensors
– the lighting duration is reduced by 30
minutes
Lighting duration of the feature lighting
The lighting duration for the feature
lighting is set to 30 minutes at the factory.
The lighting duration can be set to 30,
60, 90 minutes, up to 00 (unlimited). The
feature lighting will have the brightness
setting you have selected previously.
 Open the appliance door.
– the lighting duration is increased by
30 minutes.
 Touch the OK sensor to confirm your
choice.
The selected lighting duration is saved.
The temperature reappears in the display.
 Touch the On/Off sensor for the feature lighting so that it is highlighted in
yellow.
 Touch the sensor for the feature lighting again (approx. two seconds), until
the  flashes in the display.
 Use the sensors for altering the temperature (  and  ) to set the feature
lighting duration.
The times (in minutes) will flash in the
display.
36
The set lighting duration starts again
whenever the appliance door is opened
and closed.
Caution! Laser beam class 1M
Do not remove the lighting covers!
If the covers are damaged or need to
be removed due to damage, do not
use optical instruments (magnifying
glass or similar) to look at the lighting.
Storing wine bottles
Vibration and movement have a negative effect on the maturing process
which can affect the taste of the wine.
Wooden shelves
To avoid disturbing other bottles when
removing a bottle of wine, store bottles
of the same type beside each other on
the same shelf. Avoid stacking bottles
on top of one another on the wooden
shelves.
Always place the bottles in a horizontal
position so that the corks can be kept
moist on the inside and air is prevented
from getting into the bottles.
The wooden shelves are mounted on
telescopic runners which can be pulled
out to make it easier to store and remove bottles.
 Risk of injury!
Take care that wine bottles do not fall
out of the appliance when a wooden
shelf is pulled out. Wine bottles
could also become wedged in the
shelf above.
37
Storing wine bottles
Moving the wooden shelves
The wooden shelves can be removed
and replaced again if required.
 Slide the wooden shelf back into the
appliance as far as it will go  .
 Push the wooden shelf right back so
that it clicks into place at the front.
 Pull the wooden shelf out until it
stops .
 Release the wooden shelf at the
back, lifting the shelf on the left and
right at the same time .
 Lift the wooden shelf forwards to remove it.
 To replace the wooden shelf, position
it on the extended runners. The
notches in the wooden shelf fit over
the retaining pins. The magnetic strip
should be pointing forwards.
38
 Press down on the back of the
wooden shelf so that it clicks into
place at the back  .
Storing wine bottles
Adjusting the wooden shelves
Labeling wooden shelves
The slats in the wooden shelves can be
individually adjusted to suit, so that every bottle is stored in perfect safety regardless of shape or size.
For quick and easy identification of the
wines stored, you can write on the
blackboard-painted surface on the
magnetic strips on the wooden shelves.
Use the chalk supplied. You can write
directly on the magnetic strip or remove
it from the wooden shelf. To do so:
 Simply lift individual slats to move or
remove them from the wooden
shelves. This makes it easy to adjust
the wooden shelf for any size of your
wine bottle.
The slats in the decor shelf (at the bottom of the appliance) cannot be adjusted.
 Hold the magnetic strip by the sides
and pull it forwards. The magnetic
strip is held on the wooden shelf by
magnets.
 Mark the magnetic strip with the
chalk supplied and replace the strip
on the front of the wooden shelf.
 The magnetic strip can be wiped
clean with a damp cloth.
Only use water to wipe the magnetic
strips. Do not use a cleaning agent
as this would damage the blackboard paint.
39
Storing wine bottles
Inserting the decor shelf
Maximum capacity
 Place the decor shelf at the very bottom of the appliance (see "Guide to
the appliance").
Up to 34 Bordeaux-type bottles
(0.75 liters) can be stored in the wine
unit, with 14 in the upper zone and 20
bottles in the lower zone.
The total of 34 bottles can only be
achieved by using all wooden shelves.
Do not exceed the maximum loadbearing capacity of 25 kg for each
wooden shelf. Do not stack bottles
on the wooden shelves.
40
Automatic defrosting
The wine conditioning unit defrosts automatically.
41
Cleaning and care
Do not let water get into the electronic unit, the ventilation grille or the
lighting.
Cleaning agents
Do not use a steam cleaning appliance to clean this wine conditioning
unit. The steam could reach electrical
components and cause a short circuit.
– Cleaning products containing soda,
ammonia, acid, or chloride
Do not remove the data plate located
inside the appliance. It contains information which is required in the event
of a service call.
To avoid damaging the surfaces of your
appliance, do not use
– lime scale removers
– abrasive cleaning products, such as
scouring powder, scouring liquid, or
pumice stones,
– cleaners containing solvents
– stainless steel cleaners
– dishwasher detergent,
– Oven sprays
– glass cleaner (except on the glass in
the appliance door)
– hard, abrasive sponges and brushes,
such as pot scrubbers
– eraser sponges
– sharp metal scrapers.
Cleaning and conditioning agents
used inside the wine conditioning
unit must be food safe.
Use warm water and liquid dish soap.
The following pages contain important information on cleaning.
42
Cleaning and care
Before cleaning the wine conditioning unit
 Clean the appliance door with a glass
cleaner.
 Switch off the appliance.
Cleaning the ventilation grilles
 Unplug the appliance or trip the circuit breaker.
 Take any wine bottles out of the wine
conditioning unit and store them in a
cool place.
 Take out all other removable parts for
cleaning.
 Remove the magnetic strips from the
wooden shelves before cleaning them
(see "Labeling wooden shelves").
Interior, accessories and appliance door
Clean the wine conditioning unit regularly, or at least once a month.
Clean up any spills, stains or food
immediately. Do not allow them to
dry and stick to the appliance.
A build-up of dust will increase the energy consumption of the appliance.
 The air vents should be cleaned on a
regular basis with a brush or vacuum
cleaner (you could use a Miele vacuum cleaner dusting brush, for example).
Cleaning the door seal
Do not use any grease or oil on the
door seal as these will cause the seal
to deteriorate and become porous
over time.
 The door seal should be cleaned regularly with clean water and then
wiped thoroughly dry with a soft
cloth.
 Clean the interior with a solution of
lukewarm water and liquid dish soap.
 The wooden shelves should only be
wiped with a damp cloth. They must
not be allowed to get wet.
 Use clean water only to wipe the
magnetic strips at the front of the
wooden shelves. Do not use a cleaning agent as this would damage the
blackboard paint.
 After cleaning, wipe the interior and
accessories with a damp cloth, and
dry with a soft cloth. Leave the door
open to air the appliance for a short
while.
43
Cleaning and care
Cleaning the air filter
 Clean the air filter behind the ventilation grille at least once a year.
 Remove the air filter and vacuum it
thoroughly on both sides. A dirty filter
can prevent the wine conditioning
unit from cooling sufficiently.
After cleaning
 Replace all parts in the wine conditioning unit.
 Reconnect to the power and switch
the wine conditioning unit back on.
 Place the wine bottles back in the
wine conditioning unit and close the
door.
44
Active AirClean filter
Fresh air from the room enters the wine
conditioning unit through the Active AirClean filter. Filtering the incoming air
through the Active AirClean filter ensures that all air entering the appliance
is fresh and free from dust and odors.
The reminder to change the Active AirClean filter will be displayed at the latest every 12 months.
 Remove the back part of the filter
from the cover.
When the Change Active AirClean filter
symbol  lights up in the display, the
Active AirClean filter must be
changed.
Replacing the Active AirClean
filter
 Push the new filter onto the cover.
 Insert the new filter.
 Push the filter in and then release it.
 Push the filter in and then release it.
The filter will lock into place automatically with an audible click.
Active charcoal filters can be obtained
from Miele Technical Service, your local dealer or via the Miele website.
 Pull the filter out.
45
Active AirClean filter
To confirm the filters have been
changed,
 Touch the OK sensor to confirm your
selection.
 Touch the settings sensor.
All symbols available for selection will
appear in the display and the  symbol
flashes.
 Touch the sensors for setting the
temperature ( or ) repeatedly until
the  symbol flashes in the display.
The selected setting will be adopted
and the  symbol will flash.
 Touch the settings sensor to leave the
settings mode.
Otherwise the appliance will exit the
settings mode automatically after approximately one minute.
The  in the display goes out.
 Touch the OK sensor to confirm your
selection.
The  symbol flashes in the display
(meaning: Active AirClean filter is installed in your wine conditioning unit),
the  symbol lights up.
 Touch the sensors for setting the
temperature ( or ) until the  symbol is displayed (meaning: the
counter has been reset).
46
Frequently asked questions
With the aid of this guide, minor problems can be corrected without a service call.
If, having followed the suggestions below, you still cannot resolve the problem,
please contact Miele Service.
To prevent cold air from escaping, open the appliance doors as little as possible
until the malfunction has been corrected.
 Unauthorized installation, maintenance and repairs can cause considerable
danger for the user.
Installation, maintenance and repairs must only be carried out by a Miele authorized technician.
Problem
Possible cause and solution
The wine conditioning
unit is not getting cold,
the interior lighting
does not come on when
the door is opened, and
the display is not lit up.
The wine conditioning unit is not switched on and the
power connection symbol  is lit up in the display.
 Switch on the wine conditioning unit.
The plug is not properly plugged into the electrical
outlet.
 Insert the plug correctly into the outlet. The power
connection symbol  appears in the display
when the wine conditioning unit is switched off.
Check whether the fuse has tripped. If it has there
could be a fault with the appliance, the household
electrical wiring or another electrical appliance.
 Contact a qualified electrician or Miele Technical
Service for assistance.
The  symbol is disDemo mode is turned on and the  symbol is illumiplayed, the wine condi- nated in the display.
tioning unit is not get Turn off Demo mode (see "Information for dealers ting cold. However, the
Demo mode").
appliance and the interior lighting are working
fine.
47
Frequently asked questions
Problem
Possible cause and solution
The compressor is
switching on more frequently and for longer
periods of time, the
temperature in the wine
conditioning unit is falling.
The temperature in the wine conditioning unit is set
too low.
 Correct the temperature setting.
The door is not properly closed.
 Check whether the appliance door is properly
closed.
The door was opened too frequently.
 Only open the door when necessary and for as
short a time as possible.
The ventilation grilles are covered over or are dusty.
 Do not cover the air vents and dust them regularly.
The air filter is dusty.
 Clean the air filter (see "Cleaning and care").
The ambient temperature is too warm.
 Decrease the ambient temperature.
The compressor comes
on less and less often
and for shorter periods
of time. The temperature in the wine conditioning unit rises.
48
This is not a fault. The temperature is too high.
 Correct the temperature setting.
 Check the temperature again after 24 hours.
The air filter in the appliance plinth is dirty.
 Clean the air filter in the appliance plinth (see
"Cleaning and care").
Frequently asked questions
Messages in the display
Message
Possible cause and solution
The alarm symbol  is
lit up in the display and
both wine conditioning
zone sensors flash in
the control panel. An
audible alarm is also
sounding.
The door alarm has been activated.
 Close the wine unit door. Both wine conditioning
zone sensors and the alarm symbol  will go out
and the acoustic alarm will stop.
The alarm symbol  is The temperature in the zone concerned has risen
flashing in the display
higher or fallen lower than the temperature set
and the sensor for one For instance, this could be due to
of the wine conditioning
– the door being opened too frequently,
zones is flashing. An
audible alarm is also
– blocked ventilation gaps,
sounding.
– a lengthy interruption to the power supply.
 Rectify the cause of the alarm. The alarm symbol
 will go out and the sensor for the zone concerned will light up constantly again. The audible
alarm stops.
The Change Active Air- This is the reminder to change the Active AirClean filClean filter symbol  is ter.
lit up.
 Replace the Active AirClean filter and then confirm
the filter change in settings mode (see "Active AirClean Filter").
A dash is lit up up/flash- Only temperatures within the range of the appliance
ing in the display.
temperature will be displayed.
The symThere is a fault.
bols F1 to F3 or S1 to S3 a  Contact Miele Technical Service.
ppear in the display.
49
Frequently asked questions
The interior lighting is not working.
Problem
Possible cause and solution
The LED interior lighting The wine conditioning unit is not switched on.
is not working.
 Touch the On/Off sensor.
To avoid overheating, the LED lighting switches itself
off automatically after approx. 15 minutes if the door
is left open.
If this is not the case, then there is a fault.
Caution! Laser beam class 1M
Do not remove the lighting covers.
If the covers are damaged or need to be removed
due to damage, do not use optical instruments
(magnifying glass or similar) to look at the lighting.
 Contact Miele Technical Service!
The LED interior lighting The feature lighting is turned on.
is on even when the
 Turn the feature lighting off (see "Feature lighting".)
door is closed.
50
Frequently asked questions
General problems with the wine conditioning unit
Problem
Possible cause and solution
There is no acoustic
This is not a fault. The alarm tone has been turned off
alarm although the door in settings mode (see "Selecting additional settings has been open for a
Acoustic signals").
long time.
The wine conditioning
The safety lock is activated. The  symbol is lit in the
unit cannot be switched display.
off.
 Turn off the safety lock (see "Selecting settings Switching the safety lock on/off").
The slats on the
wooden shelves are
warping.
Volume change due to moisture absorption or drying
out is a typical characteristic of wood. An increase in
humidity will cause wooden components to warp,
which can lead to cracking. Knots and wavy grain are
characteristic for wood and cannot be avoided.
Mildew has begun to
form on the wine bottle
labels.
Mildew may form on the labels, depending on the
type of label adhesive used.
 Clean the wine bottles and remove any adhesive
residue.
A white deposit has
The corks have oxidized due to contact with the air.
formed on the wine bot-  Use a dry cloth to wipe off the deposit. The detle corks.
posit will not affect the quality of the wine.
51
Causes of noises
Normal noises
Cause
Brrrrr...
A humming noise is made by the motor (compressor). This
noise can get louder for brief periods when the motor switches
on.
Blub, blub....
A gurgling noise can be heard when the coolant circulates
through the pipes.
Click....
Clicking sounds occur whenever the thermostat switches the
motor on or off.
Sssrrrrr....
On multi-zone wine conditioning units you can sometimes just
hear the sound of the fan inside the appliance.
Crack...
A cracking sound can be heard when material inside the wine
conditioning unit expands.
Please bear in mind that a certain amount of noise is unavoidable (from the compressor and the coolant circulating through the system).
Noises that you
can easily eliminate
Possible cause
Solution
Rattling, clinking
The wine conditioning unit is
uneven.
Realign the wine conditioning unit using a spirit level,
by raising or lowering the
screw feet underneath the
appliance.
Shelves are unstable or stick- Check all removable items
ing.
and refit them correctly.
52
Bottles or containers are
touching.
Separate them.
The transport cord clip is still
hanging on the back of the
appliance.
Remove the clip.
Technical Service
Technical service
Warranty
In the event of a fault which you cannot
easily correct yourself, please contact:
For additional information, please refer
to your warranty booklet.
– your Miele dealer or
– Miele Technical Service.
Contact details can be found in the
back of these operating and installation instructions.
Please quote the model and serial number of your appliance when contacting
Miele.
This information is given on the data
plate inside the wine conditioning unit.
See the end of these operating and installation instructions for this telephone number.
MieleCare
MieleCare, our Extended Service Contract program; gives you the assurance
of knowing that your appliance investment is covered by 5 years of worryfree ownership.
MieleCare is the only Extended Service
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory-trained professionals can guarantee the safety, reliability and longevity
of your Miele appliance.
Please note that unless expressly approved in writing by the Miele Service
department, Extended Service Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to
them, you and/or your home.
To learn more about MieleCare Extended Service Contracts, please contact your appliance dealer or visit us
online at:
http://www.mieleusa.com
53
Information for dealers
Demo mode 
The appliance can be demonstrated in
the showroom or at exhibitions in
"Demo mode". In this mode the control
panel and interior lighting are active but
the compressor remains turned off, so
that the appliance does not cool down.
Turning on Demo mode
 Keep your finger on the  sensor until the  symbol appears in the display.
 Then release the  sensor.
Demo mode is turned on and
the  symbol is illuminated in the display.
Turning off Demo mode
 Switch the wine conditioning unit off
by touching the On/Off sensor.
The  symbol is illuminated in the display.
The temperature shown in the display
will go out and the power connection
symbol  appears.
 Touch the settings sensor.
 Touch and hold the  sensor.
 At the same time, briefly touch the
On/Off sensor (without letting go of
the  sensor!).
All symbols available for selection will
appear in the display and the  symbol
flashes.
 Touch the sensors for setting the
temperature (  or  ) repeatedly until the  symbol flashes in the display.
 Touch the OK sensor to confirm your
selection.
The 1 symbol flashes in the display
(meaning: Demo mode is active) and
the  symbol is illuminated.
54
Information for dealers
 Touch the  or  sensor so that the
symbol 0 appears in the display
(meaning: Demo mode is inactive).
 Touch the OK sensor to confirm your
selection.
The selected setting will be adopted
and the  symbol will flash.
 Touch the settings sensor to leave the
settings mode.
Otherwise the appliance will exit the
settings mode automatically after approximately one minute.
Demo mode is turned off and
the  symbol disappears.
55
Electrical connection
Connect this appliance to a 110 – 120
VAC, 60 Hz and 15 amp (20 amp for
side-by-side) circuit with a circuit
breaker or fuse.
This appliance is equipped with a threeprong grounding plug to prevent shock
hazards. It should be plugged directly
into a properly grounded outlet. Do not
cut or remove the grounding prong from
the plug. If the plug does not fit the outlet, have the proper outlet installed by a
licensed electrician. Do not use extension cords or ungrounded (two prong)
adapters.
The outlet must be easily accessible so
that the appliance can be quickly disconnected from the electrical supply in
case of an emergency.
Failure to follow these instructions can
result in death, fire, or electrical shock.
Improper connection of the equipment
grounding conductor may result in electric shock. If you are in any doubt as to
whether the appliance has been properly grounded, have the appliance
checked by a qualified electrician or
service technician.
Installation, repairs and other work by
unqualified persons could be dangerous. The manufacturer will not be held
responsible for damage or injury arising
from unauthorized work.
Before installing the appliance, verify
that the voltage, load and circuit rating
information found on the data plate
match the household electrical supply.
To guarantee the electrical safety of this
appliance, continuity must exist between the appliance and an effective
grounding system. It is imperative that
this basic safety requirement be met. If
56
there is any doubt, have the electrical
system of the house checked by a qualified electrician.
The plug and power cord must not
come into contact with the back of the
appliance as vibrations can cause damage to these components. This, in turn,
could result in a short circuit.
Do not plug in other appliances behind
this wine conditioning unit.
Do not use an extension cord to connect the appliance to the power supply.
Extension cords do not guarantee the
required safety of the appliance (danger
of overheating, for example).
Do not connect the appliance to an inverter such as those used with an autonomous energy source e.g. solar
power. When switched on, peak loads
in the system can cause the safety
switch-off mechanism to be triggered.
This can damage the electronic unit.
The appliance must not be used with
so-called energy-saving devices either. These reduce the amount of energy supplied to the appliance, causing
it to overheat.
If the power cord needs to be replaced,
this must be done by a qualified technician.
Installation information
A wine conditioning unit that has not
been installed properly can tip up.
 Risk of fire and damage! This
wine conditioning unit must not be
installed underneath a cooktop.
Installation location
This appliance should be installed in a
dry, well-ventilated room.
This appliance should not be installed
where it is exposed to direct sunlight or
directly adjacent to a heat-producing
appliance such as an oven or a radiator.
The higher the ambient temperature of
the room, the longer the compressor
runs, and the more energy the appliance requires to operate. The appliance
should be installed in a dry, well ventilated room.
 Danger from broken glass!
Danger of injury due to broken glass!
If installed at altitudes above 4,900 ft
(1,500 m) there is a risk of the glass
in the door breaking because of
changes in air pressure. Shards of
glass can cause severe injury if not
handled with care.
Side-by-side
This wine conditioning unit can be installed side-by-side with another refrigeration appliance.
Tip: Please contact Miele for specific
information about which combinations
will work with your appliance.
When installing the wine conditioning
unit, please note:
– The electrical socket must be easily
accessible in an emergency, not concealed behind the appliance.
– The plug and cord must not touch
the back of the wine conditioning unit
as they could be damaged by vibrations from the appliance.
– Do not plug in other appliances behind this wine conditioning unit.
57
Installation information
Climate class
The wine conditioning unit is designed
for use within a certain climate range
(ambient temperatures) and should not
be used outside this range. The climate
range of the wine conditioning unit is
stated on the data plate inside it.
Climate class
Room temperature
SN
50° to 90°F
(10° to 32°C)
N
61° to 90°F
(16° to 32°C)
ST
61° to 100°F
(16° to 38°C)
T
61° to 109°F
(16° to 43 °C)
Operating in a room which is too cold
will cause the compressor to turn off for
too long, causing the internal temperature in the appliance to rise, resulting in
damage.
58
IMPORTANT
In environments with high humidity
condensation may appear on the external surfaces of the wine conditioning unit.
Condensate can cause corrosion on
external appliance walls.
For prevention, it is advisable to install the wine conditioning unit with
sufficient ventilation in a dry and/or
air conditioned room.
After installation make sure that the
appliance door closes properly, the
air vents are not covered and that
the wine conditioning unit has been
installed in accordance with these installation instructions.
Installation information
Ventilation
Before installing the wine conThe appliance is ventilated via the venti- ditioning unit
lation gap in the plinth. This must not
be covered over or blocked. Clean the
ventilation gap regularly to remove any
dust.
 Remove the accessories from the appliance.
 Remove the cord clip from the back
of the appliance (depending on
model).
The cut-out in the unit base must be in
the center of the wine conditioning
unit.
 Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
59
Installation information
Door opening angle limiter
The door opening angle limiter restricts
the opening angle of the appliance door
to 90°. For example, this may be necessary if the appliance door hits an adjacent wall when opened (see "Adjusting
the door hinges").
60
Installation information
Installation dimensions
Before installation, and if the appliance is to fit inside a niche, ensure its dimensions are the correct size. The specified air vents must be observed and the cutout in the plinth facing must be aligned centrally with the appliance in order to ensure the correct functioning of the appliance.
The ventilation grille and foam block supplied must be installed and used together.
61
Installation information
View from above
62
Adjusting the door hinge
The door hinges on the wine conditioning unit are set at the factory to enable
the appliance door to be opened wide.
However, if the opening angle of the
door needs to be limited for any reason,
the hinge can be adjusted to accommodate this.
If, for example, the appliance door hits
an adjacent wall when it is opened the,
you should limit the opening angle of
the appliance door to 90°.
 Insert the pins supplied into the
hinges from above.
This will limit the opening angle of the
appliance door to 90°.
63
Reversing the door hinge
The wine conditioning unit is supplied
right-hand hinged. If left-hand hinging is
required, the hinges must be changed.
The following tools are required for
changing the door hinging:
Warning! The glass door breaks easily!
Always change the door hinge with
the assistance of another person.
 Place a suitable cover on the floor in
front of the appliance to protect the
glass door and your floor from damage.
Be careful not to damage the door
seal. If the door seal is damaged, the
appliance door may not close properly and there will not be sufficient
refrigeration.
64
 Remove covers .
 The second person must support
the appliance door.
Caution! When the hinge is subsequently released, the door is no
longer secure.
Reversing the door hinge
 Place the door with the outer side upwards on a stable surface.
 Risk of injury!
Do not close the hinges.
 Remove screws  first from the
lower hinge.
 Unclip upper and lower covers .
 Remove spacer  from the appliance
door, rotate it 180° and fit it on the
opposite side.
 Remove screws  from the upper
hinge.
 Remove the appliance door .
65
Reversing the door hinge
 Remove the screws .
 Replace screws  again.
 Clip covers  back on. Note the position of the notches on the hinges.
 Place each hinges  in the corner diagonally opposite from its original position.
66
Reversing the door hinge
 Take off lower retaining
bracket  and replace it on the opposite side.
 Remove covers .
 Take off upper retaining bracket 
and replace it on the opposite side.
 Fit appliance door .
 Risk of injury!
The second person must support the
appliance door.
67
Reversing the door hinge
 Tighten the screws in upper hinge .
 Tighten the screws in lower hinge .
 Now install the wine conditioning unit.
68
Installing the wine conditioning unit
 Warning! Do not drop the appliance. Risk of injury and damage.
Two people are required for installing
this wine conditioning unit.
 Install the wine conditioning unit in a
stable, solid housing unit, positioned
on an even and level floor.
 The niche must be horizontally and
vertically aligned.
 The required air vent cross-sections
must be ensured (see "Installation Ventilation" and "Installation dimensions").
To install the wine conditioning unit,
you will need the following tools:
– A selection of screwdrivers
– a spirit level
– a tape measure
The following installation parts are
required:
– Ventilation grilles
– Air filter
– Foam block for air filtration in the
appliance plinth
– Screws to secure the appliance in
the niche
– Wrench to adjust height in the
niche
69
Installing the wine conditioning unit
Setting up the wine conditioning unit
The air filter prevents soiling of the
compressor compartment to ensure
efficient functioning of the appliance.
 Carefully remove the protective foil
from air filter .
 Insert the air filter into the bottom left
of the appliance plinth.
 Connect the wine conditioning unit to
the power supply (see "Electrical
Connection").
 Position the wine conditioning unit in
front of the niche.
70
 Turn the adjusting feet  clockwise
until the top of the unit is
3/16" (4 mm) below the height of the
niche.
Installing the wine conditioning unit
 Align the wine conditioning unit horizontally and vertically. If the wine
conditioning unit is not correctly
aligned it can distort.
 The feet can be adjusted with the
open-ended wrench supplied  or
with an Allen key .
 Check the alignment of adjacent furniture housing doors. If adjacent
doors vary in height from the wine
conditioning unit, see "Aligning the
wine conditioning unit to taller furniture doors".
71
Installing the wine conditioning unit
Aligning the wine conditioning unit to
taller furniture doors

To avoid damaging the wine conditioning unit, the ventilation grille must
be positioned precisely in front of the
vent outlet! If you wish to fit a trim
across the bottom of the wine conditioning unit, make sure it provides
adequate ventilation.
If adjacent furniture doors  are taller
than the wine conditioning unit door,
the wine conditioning unit can be
aligned to the adjacent furniture doors
using a filler panel .
The filler panel must be made exactly
to measure.
 Secure the bracket  to the back of
filler panel .
A bracket  is required to secure the
filler panel, which is available from Miele
Technical Service or from your dealer.
The filler panel can be fitted above or
below the wine conditioning unit as required:
 Pull the wine conditioning unit as far
as you need to out of the niche so
that you can tilt it towards you.
 Loosely screw the bracket with the
filler panel to the wine conditioning
unit.
 Align the filler panel to the door of the
wine conditioning unit over the slotted holes to give a flush finish.
72
Installing the wine conditioning unit
 Now tighten the screws.
 You can now push the wine conditioning unit into the niche.
Securing the wine conditioning
unit in the
niche
Pushing the wine conditioning
unit into the niche
 The wine conditioning unit must protrude evenly from the furniture doors
by 1/16" (2 mm).

 Open the appliance door.
Make sure that the power cord does
not become trapped or damaged as
you push the wine conditioning unit
into its installation space.
To avoid damage to the flooring
which is susceptible to scratching,
take great care when pushing the appliance into the niche.
 Remove cover  and first screw the
wine conditioning unit to the adjacent
furniture unit at the top left .
The wine conditioning unit will align itself to the left side of the niche. The
front of the appliance door must be
flush with the furniture front.
 Push the appliance into the niche until the front of the appliance door is
flush with surrounding furniture
doors.
 Put cover  back into place.
 Pull the wine conditioning unit forward so that it stands proud of the
furniture doors evenly by
1/16" (2 mm).
73
Installing the wine conditioning unit
When the wine conditioning unit is connected to the power supply, the power
connection symbol  will appear in the
display after a short while.
 Touch the On/Off sensor.
The power connection symbol  will
go out and the wine conditioning unit
will start to cool.
 Screw the wine conditioning unit at
the bottom right and left to adjacent
furniture units.
 If necessary, a fourth screw can be
used in the top right-hand hinge to
secure the wine conditioning unit.
To do so, dismantle the door and then
fit this extra screw.
 Close the appliance door and check
that the side edges of the appliance
door are aligned with the side walls of
the wine conditioning unit.
 Now connect the wine conditioning
unit to the power supply.
74
The Push2open system on the wine
conditioning unit is now activated (see
"Guide to the appliance – Door opening
aid").
Installing the wine conditioning unit
Adjusting the lateral alignment of the
appliance door
If the appliance door is not aligned with
the housing side walls, the appliance
door can be adjusted using the screws
underneath the hinges.
 Secure the covers.
 Insert foam block  supplied into the
appliance plinth.
 Loosen screws  and align the appliance door.
 Tighten screws  again.
If the foam block is not fitted, the
wine conditioning unit will not
achieve optimum cooling and may
be damaged.
75
Installing the wine conditioning unit
 Fit unit base .

The cut-out in the plinth facing must
be in the center of the wine conditioning unit.
 Fit ventilation grille  into the plinth
facing. This will cause the foam block
to be pushed back.
The foam block must be resting
against the ventilation grille to ensure
that the airflow is separated.
76
Please have the model and serial number
of your appliance available before
contacting Technical Service.
U.S.A.
Canada
Miele, Inc.
Importer
Miele Limited
National Headquarters
9 Independence Way
Princeton, NJ 08540
Phone: 800-843-7231
609-419-4298
Fax:
www.mieleusa.com
Technical Service & Support
Nationwide
Phone: 800-999-1360
888-586-8056
Fax:
[email protected]
International Headquarters
Miele & Cie. KG
Carl-Miele-Straße 29
33332 Gütersloh
Germany
Headquarters and Miele Centre
161 Four Valley Drive
Vaughan, ON L4K 4V8
www.miele.ca
Customer Care Centre
Phone: 800-565-6435
905-532-2272
[email protected]
KWT 6322 UG

en-US
M.-Nr. 10 531 320 / 01

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement