Miele | 28369055USA | Operating Instruction | Miele 28369055USA Operating Instruction

Operating and installation instructions
Cooker hood
To prevent the risk of accidents or damage to the appliance, it is
essential to read these instructions before it is installed and used for
the first time.
en-GB
M.-Nr. 09 885 260
Contents
Warning and Safety instructions .......................................................................... 4
Caring for the environment ................................................................................. 13
Modes of operation.............................................................................................. 14
Con@ctivity 2.0 function ........................................................................................ 15
Guide to the appliance......................................................................................... 16
Operation (Automatic mode)............................................................................... 18
Cooking with Con@ctivity 2.0 (Automatic mode)................................................... 18
Leaving automatic mode temporarily..................................................................... 20
Returning to automatic mode ................................................................................ 20
Operation (Manual mode).................................................................................... 21
Cooking without Con@ctivity 2.0 (Manual mode) .................................................. 21
Remote control ...................................................................................................... 21
Extending the deflector plate, switching the fan on............................................... 21
Selecting the power level....................................................................................... 22
Selecting the run-on time....................................................................................... 22
Switching the fan off .............................................................................................. 22
Dimming/switching the hob lighting on/off ............................................................ 23
Power management ............................................................................................... 23
Operation (Automatic and Manual modes)........................................................ 25
Operating hours counters ...................................................................................... 25
Altering the operating hours counter for the grease filters ............................... 25
Activating and altering the charcoal filter operating hours counter .................. 26
Reading the filter operating hours counter ....................................................... 27
Energy saving tips................................................................................................ 28
Cleaning and care ................................................................................................ 29
Casing .................................................................................................................... 29
Grease filters .......................................................................................................... 30
Charcoal filters ....................................................................................................... 32
Resetting the charcoal filter operating hours counter....................................... 33
Disposing of the charcoal filters ....................................................................... 33
Remote control ...................................................................................................... 34
Cleaning the remote control ............................................................................. 34
Changing the battery ........................................................................................ 34
After Sales / Guarantee ....................................................................................... 35
Position of the data plate ....................................................................................... 35
2
Contents
Installation ............................................................................................................ 36
Appliance dimensions............................................................................................ 36
Safety distance between hob and cooker hood (S)............................................... 38
Installation recommendations................................................................................ 39
Before installation .................................................................................................. 39
Assembly parts ...................................................................................................... 40
Exhaust socket ...................................................................................................... 50
Setting up for recirculation mode .......................................................................... 51
Electrical connection.............................................................................................. 51
Electrical connection ........................................................................................... 52
Connection for air extraction .............................................................................. 53
Condensate trap .................................................................................................... 54
Silencer .................................................................................................................. 54
Activating Con@ctivity 2.0................................................................................... 56
Installing the Con@ctivity 2.0 Stick........................................................................ 56
Activating Con@ctivity 2.0 ..................................................................................... 56
Activating the cooker hood............................................................................... 56
Activating the hob............................................................................................. 57
Activation failed ................................................................................................ 57
Deactivating Con@ctivity 2.0 ................................................................................. 57
Signing on/off the remote control ...................................................................... 58
Technical data ...................................................................................................... 60
Conformity declaration........................................................................................... 60
Data sheet for domestic cooker hoods ................................................................. 61
Data sheet for domestic cooker hoods ................................................................. 62
3
Warning and Safety instructions
This appliance complies with all relevant local and national safety
requirements. Inappropriate use can, however, lead to personal
injury and damage to property.
To avoid the risk of accidents and damage to the appliance,
please read these instructions carefully before using it for the first
time. They contain important notes on the safety, installation, use
and maintenance of the appliance. Miele cannot be held liable for
non-compliance with these instructions.
Keep these instructions in a safe place and ensure that all users
are familiar with the contents. Pass them on to any future owner of
the appliance.
Correct application
 This cooker hood is intended for use in domestic households and
similar working and residential environments.
 The cooker hood is not intended for outdoor use.
 It must only be used as a domestic appliance to extract vapours
and remove odours from cooking.
Any other usage is not supported by the manufacturer and could be
dangerous.
 The cooker hood can only be used by people with reduced
physical, sensory or mental capabilities, or lack of experience and
knowledge, if they are supervised whilst using it, or have been
shown how to use it in a safe way and recognise and understand the
consequences of incorrect operation.
4
Warning and Safety instructions
Safety with children
 Children under 8 years of age must be kept away from the cooker
hood unless they are constantly supervised.
 Children 8 years and older may only use the cooker hood
unsupervised if they have been shown how to use it safely and
recognise and understand the consequences of incorrect operation.
 Children must not be allowed to clean or maintain the cooker
hood unsupervised.
 Please supervise children in the vicinity of the cooker hood and
do not let them play with it.
 Danger of suffocation. Packaging, e.g. plastic wrappings, must be
kept out of the reach of babies and children. Whilst playing, children
could become entangled in packaging or pull it over their head and
suffocate.
 Keep the battery for the remote control out of the reach of
children.
5
Warning and Safety instructions
Technical safety
 Unauthorised installation, maintenance and repairs can cause
considerable danger for the user. Installation, maintenance and
repairs must only be carried out by a Miele authorised technician.
 A damaged appliance can be dangerous. Check it for visible signs
of damage. Do not use a damaged appliance.
 The electrical safety of this appliance can only be guaranteed
when correctly earthed. It is essential that this standard safety
requirement is met. If in any doubt please have the electrical
installation tested by a qualified electrician.
 Reliable and safe operation of this cooker hood can only be
assured if it has been connected to the mains electricity supply.
 Before connecting the appliance to the mains supply, ensure that
the connection data on the data plate (voltage and frequency) match
the mains electricity supply. This data must correspond in order to
avoid the risk of damage to the appliance. Consult a qualified
electrician if in any doubt.
 Do not connect the appliance to the mains electricity supply by a
multi-socket unit or an extension lead. These are a fire hazard and
do not guarantee the required safety of the appliance.
 For appliances with an external motor fitted (...EXT models) the
connection of the two units must be made using the connection
cable and the plug connectors.
These models may only be combined with a Miele external motor.
6
Warning and Safety instructions
 For safety reasons, this appliance may only be used after it has
been built in.
 The cooker hood must not be used in a non-stationary location
(e.g. on a ship).
 Tampering with electrical connections or components and
mechanical parts is highly dangerous to the user and can cause
operational faults.
Only open the housing as described in the instructions given in the
installation sheet and in the Cleaning and care section of this
booklet. Under no circumstances should any other parts of the
housing be opened.
 The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele approved service technician.
 Miele can only guarantee the safety of the appliance when
genuine original Miele replacement parts are used. Faulty
components must only be replaced by Miele spare parts.
 If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.
 During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply.
7
Warning and Safety instructions
Using at the same time as other heating appliances that depend on the air
from the room
 Warning - danger of toxic fumes
Great care should be taken when using the cooker hood at the
same time and in the same room or area of the house as another
heating appliance which depends on the air in the room.
Such appliances include gas, oil, wood or coal-fired boilers and
heaters, continuous flow or other water heaters, gas hobs,
cookers or ovens which draw air in from the room and duct
exhaust gases out through a chimney or extraction ducting.
When used in extraction mode, with or without an external motor
fitted, or in recirculation mode with a recirculation box installed
outside the room, the appliance draws air in from the room in
which it is installed and from neighbouring rooms.
If there is insufficient air, an underpressure will occur. The heating
appliance will be starved of oxygen, impairing combustion.
Harmful gases could be drawn out of the chimney or extraction
ducting back into the room, with potentially fatal consequences.
8
Warning and Safety instructions
In order to ensure safe operation, and to prevent gases given off
by the heating appliances from being drawn back into the room
when the cooker hood and the heater are in operation
simultaneously, an underpressure in the room of 0.04 mbar (4 pa)
is the maximum permissible.
Ventilation can be maintained by air inlets which cannot be
blocked, in windows, doors or outside wall vents, or by other
technical measures, such as ensuring that the cooker hood can
only be switched on when the heating appliance is switched off or
vice versa. A ventilation brick alone is not generally sufficient to
ensure safe ventilation.
The overall ventilation condition of the dwelling must be taken into
account. If in any doubt, the advice of a competent builder or, for
gas a qualified gas fitter (registered with an official gas safety
body in accordance with national safety regulations, GasSafe in
the UK) must be sought.
If the cooker hood is used in recirculation mode, where the air is
directed back into the room in which it is located, operating a
heating appliance which depends on the room air at the same
time is no cause for concern.
9
Warning and Safety instructions
Correct use
 Never use a naked flame beneath the cooker hood. To avoid the
danger of fire, do not flambé or grill over a naked flame.
When switched on, the cooker hood could draw flames into the filter.
Fat deposits could ignite, presenting a fire hazard.
 The cooker hood can become damaged when exposed to
excessive heat.
– When using the cooker hood over a gas hob, ensure that any
burners in use are always covered by a pan. Switch the cooking
zone off when a pan is removed, even for a short time.
– Select a pan which is suitable for the size of the burner.
– Regulate the flame so that it does not burn up the sides of the
pan.
– Avoid overheating the pan (e.g. when cooking with a wok).
 Always switch the cooker hood on when a cooking zone is in use,
otherwise condensation may collect in the hood, which could cause
corrosion.
 When cooking with oil or fat, chip pans and deep fat fryers etc, do
not leave the pans unattended. Never leave an open grill unattended
when grilling. Overheated oil and fat can ignite and could set the
cooker hood on fire.
10
Warning and Safety instructions
 Do not use the cooker hood without the filters in place. This way
you will avoid the risk of grease and dirt getting into the appliance
and hindering its smooth operation.
 There is a risk of fire if the cooker hood is not cleaned as
described in these operating instructions.
 The cooker hood can get very hot during cooking due to heat
rising from the hob.
Do not touch the housing or the grease filters until the cooker hood
has cooled down.
Correct installation
 Refer to the cooker or hob manufacturer's instructions as to
whether a cooker hood may be operated above the cooker/hob.
 Safety regulations prohibit the fitting of a cooker hood over solid
fuel stoves.
 Insufficient distance between the cooker or hob and the cooker
hood can result in damage to the hood.
The minimum safety distances between the top of the cooker or hob
and the bottom of the cooker hood given in the "Installation" section
must be maintained, unless the hob manufacturer states that a
greater distance is required.
If more than one cooking appliance is fitted beneath the cooker
hood, and they have different minimum safety distances to the
cooker hood, select the greater distance.
 The distances given in "Installation" must be observed when
fitting the cooker hood.
 Exhaust ducting must be of non-inflammable material. Suitable
material is available from Miele specialist dealers or the Miele Spares
Dept.
 The appliance must not be connected to a chimney or flue which
is in use. Neither should it be connected to ducting which ventilates
rooms with fireplaces.
11
Warning and Safety instructions
 If exhaust air is to be extracted into a chimney or ventilation duct
no longer used for other purposes, seek professional advice.
Cleaning and care
 Do not use a steam cleaning appliance to clean this appliance.
The steam could reach electrical components and cause a short
circuit.
 Important information on handling the remote control battery:
– Do not short circuit or recharge the battery, or throw it into a fire.
Danger of explosion.
– Do not throw old batteries away with your general household
waste. Please dispose of them in a designated battery collection
and recycling system.
Accessories
 Only use genuine original Miele accessories with this appliance.
Using accessories from other manufacturers will invalidate the
guarantee, and Miele cannot accept liability.
12
Caring for the environment
Disposal of the packing
material
The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Recycling the packaging reduces the
use of raw materials in the
manufacturing process and also
reduces the amount of waste in landfill
sites.
Disposal of your old appliance
Electrical and electronic appliances
often contain valuable materials. They
also contain materials which, if handled
or disposed of incorrectly, could be
potentially hazardous to human health
and to the environment. They are,
however, essential for the correct
functioning of your appliance. Please
do not therefore dispose of it with your
household waste.
Please dispose of it at your local
community waste collection / recycling
centre or contact your Dealer for
advice.
Ensure that it presents no danger to
children while being stored for disposal.
13
Modes of operation
Depending on the model of the cooker
hood, the following options are
available:
Extraction mode
The air is drawn in and cleaned by the
grease filters and directed outside.
Non-return flap
Recirculation mode
(recirculation mode cooker hoods
require a conversion kit and charcoal
filters: see "Technical Data")
The air is drawn in and cleaned first by
the grease filters and then by the
charcoal filters. The cleaned air is then
recirculated back into the kitchen.
The non-return flap is designed to
prevent the exchange of room and
outside air taking place.
The flap is closed when the cooker
hood is switched off.
When the cooker hood is switched on,
the non-return flap opens for the
cooking vapours to be blown directly
outside.
Operation with an external
motor
If the on-site ventilation system does
not have a non-return flap, the nonreturn flap supplied must be fitted in the
exhaust socket in the motor unit.
Cooker hoods set up for operation with
an external motor have to be connected
to a Miele external motor located in a
suitable position outside the room in
which the cooker hood is installed. The
external motor is linked to the cooker
hood via a connection cable and then
operated using Con@ctivity 2.0 or via
the controls on the remote control or
the cooker hood.
14
(...EXT model cooker hoods)
Modes of operation
Con@ctivity 2.0 function
Automatic control
The cooker hood has a communication
facility which enables the automatic
operation of the cooker hood
depending on the operational state of
the hob.
The hob transmits information about its
operational status via a radio signal to
the cooker hood.
– When the hob is switched on, the
hob lighting comes on independently
and the fan also switches on and the
deflector plate comes out.
– During cooking the cooker hood
automatically sets the power level
according to the number of cooking
zones in operation and their power
levels.
– After the hob has been switched off,
the cooker hood fan and the hob
lighting will switch off and the
deflector plate will go back in.
See "Operation" for detailed
information about this function.
To make use of the communication
facility the hob must be fitted with a
Con@ctivity 2.0 stick .
Refer to the installation instructions for
the Con@ctivity 2.0 stick to check
whether it is compatible with your hob.
To use the Con@ctivity 2.0 function, a
wireless connection must be
established between the hob and the
cooker hood (see "Activating
Con@ctivity 2.0").
15
Guide to the appliance
16
Guide to the appliance
a Retractable deflector plate
b Controls
c Grease filters
d Hob lighting
e Exhaust socket
The exhaust socket can also be fitted at the back.
f Slots for the charcoal filters
g Slots for the grease filters
h Charcoal filters
(required for recirculation mode)
i Hob lighting control
j On/off control for the retractable deflector plate and the fan
k Controls to select the fan power level
The controls on the remote control are also used to extend and retract the
deflector plate and to switch the fan on and off.
l Run-on option control
m Operating hours control
n LED light
o Controls for programming
17
Operation (Automatic mode)
When Con@ctivity 2.0 is activated, the
cooker hood always works in automatic
mode (see "Activating Con@ctivity
2.0").
To operate the cooker hood manually,
see "Cooking without Con@ctivity 2.0".
Cooking with Con@ctivity 2.0
(Automatic mode)
 Switch a cooking zone on at the
power level you want.
The cooker hood lighting will come on.
After a few seconds the fan will come
on, first at power level 2, then it will
switch immediately to power level 1.
The deflector plate will come out.
The cooker hood selects the power
level automatically during cooking.
This is determined by the total output of
the hob, i.e, the number of cooking
zones in operation and the power levels
selected.
 If you select a higher power level or
are using several cooking zones, the
cooker hood will switch to a higher
power level.
 When you reduce the power level or
the number of cooking zones on the
hob, the cooker hood power level is
also reduced.
Examples for power levels 1 to 4
18
Reaction time
The cooker hood reacts with a slight
delay because altering the power level
on the hob does not immediately result
in a reduction or increase in cooking
vapours.
Because the hob transmits the
information to the cooker hood at
intervals, this can also cause delays.
The reaction can vary from a few
seconds to a couple of minutes.
Operation (Automatic mode)
Cooking process
Switching off
 If for example you switch on a
cooking zone at the highest power
level to heat a pan for frying and
reduce the power level after approx.
60 to 90 seconds*, a cooking process
is recognised (*60 seconds to 5
minutes for a HiLight hob).
 Switch off all cooking zones.
The cooker hood switches itself on and
when the hob power level has been
reduced, the hood switches to power
level 3 and remains at that level for
approx. 5 minutes.
After that the cooker hood power level
is determined automatically by the
Con@ctivity function.
 You can select another power level
manually before then.
The cooker hood fan will reduce its
power level over the next few minutes
and will eventually switch itself off.
This helps to neutralise any lingering
vapours and odours in the air.
– From the intensive setting IS the fan
switches immediately to level 3.
– From level 3, it switches to level 2
after approx. 1 minute.
– From level 2 it switches to level 1
after approx. 2 minutes
– After 2 minutes at level 1 the fan
switches itself off. The deflector plate
goes back in.
– After another 30 seconds the lighting
switches off.
The cooking process is then finished.
19
Operation (Automatic mode)
Leaving automatic mode
temporarily
To leave automatic mode temporarily
during cooking:
 Manually select a different power
level, or
 Manually switch the cooker hood off,
or
 Activate the cooker hood run-on
option . The fan will switch off
after the selected time and the
lighting remains switched on.
The cooker hood can now be operated
manually (see "Cooking without
Con@ctivity 2.0").
20
Returning to automatic mode
The cooker hood returns to automatic
mode:
 if the cooker hood has not been used
for approx. 5 minutes after selecting
a power level manually, or
 if the manually selected fan power
level corresponds to the automatic
one again, or
 if the cooker hood fan and the hob
have been switched off for at least 30
seconds.
Automatic mode will resume next
time the hob is switched on.
 If you wish to operate the cooker
hood manually for a complete
cooking process, switch on the
cooker hood fan before switching on
the hob.
If the cooker hood and the hob have
been switched off for at least 30
seconds after cooking, automatic
mode will resume the next time the
hob is switched on.
Operation (Manual mode)
Cooking without Con@ctivity
2.0 (Manual mode)
Extending the deflector plate,
switching the fan on
The cooker hood can be operated
manually if:
 Press the "" button on the remote
control.
– Con@ctivity 2.0 is not activated.
The deflector plate will come out. The
fan will switch on at level 2. The 
symbol and 2 will light up in the power
level display.
– You have temporarily deactivated
Con@ctivity 2.0 (see "Leaving
automatic mode temporarily").
Remote control
The main functions can be selected via
the cooker hood or by remote control.
The LED light on the remote control unit
will light up briefly when a function is
selected by remote control.
The maximum operating range of the
remote control is approx. 10 m.
However, this may be less depending
on the physical conditions present in
the room (e.g. furniture, walls).
The rear of the remote control unit is
magnetic which allows it to be attached
to various metal surfaces.
21
Operation (Manual mode)
Selecting the power level
Selecting the run-on time
For light to heavy cooking vapours and
odours, select from power levels 1 to 3.
It is advisable to run the fan for a few
minutes after cooking has finished to
neutralise any lingering vapours and
odours in the air.
With the run-on option the fan switches
itself off automatically and the deflector
plate retracts after a pre-selected time.
When frying or cooking food with a very
strong aroma, select the Intensive
setting IS.
 For a lower power level, press the
"" control, or "" for a higher level.
Reducing power on the intensive
setting
 After you have finished cooking,
press the run-on option control 5
15
If Power management is activated
(default), the fan automatically switches
to level 3 after 5 minutes.
– Once: the fan will switch itself off
after 5 minutes and the deflector
plate will go back in (5 lights up).
– Twice: the fan will switch itself off
after 15 minutes and the deflector
plate will go back in (15 lights up).
– If you press the run-on option control
5 15 again, the fan will remain on
(5 15 will go out).
Switching the fan off
 Press the On/Off control  on the
cooker hood or the "" control on
the remote control repeatedly until
the fan switches off.
The fan will switch off and the deflector
plate will go back in.
If the cooker hood is switched on again
whilst the deflector plate is going in, the
deflector plate will come back out again
and then may retract again slightly.
 If this happens you must switch the
cooker hood off and wait until the
deflector plate has completely
retracted.
22
Operation (Manual mode)
The next time you switch the cooker
hood on the deflector plate will come
back out again correctly.
Dimming/switching the hob
lighting on/off
The hob lighting can be switched on
and off and dimmed regardless of
whether the deflector plate is extended
or retracted.
 Press the lighting control  briefly to
switch it on and off.
The lighting will switch on at maximum
brightness.
 With the hob lighting switched on,
press and hold the hob lighting
control  in. The brightness will
gradually dim until you release the
control.
 Press the lighting control  in again
to increase the brightness to the level
required and then release it.
Power management
The cooker hood features a power
management system for saving energy.
It is used for switching off the lighting,
reducing the fan power level and
retracting the deflector plate
automatically when the cooker hood is
no longer being used.
– If the Intensive setting has been
selected the cooker hood will
automatically switch to power level 3
after 5 minutes.
– When the cooker hood has been
switched on but not used for 2 hours,
the power will be reduced by one
level at a time in 30 minute stages
until the fan finally switches off. The
deflector plate will go back in.
– The hob lighting will switch off
automatically after 12 hours.
23
Operation (Manual mode)
Switching Power management on/off
All the indicator lamps will go out
You can deactivate Power
management.
This can however result in increased
electricity consumption.
If you do not confirm within 4 minutes,
the cooker hood will revert to the old
setting.
 Switch off the cooker hood. The
deflector plate must be retracted.
 Remove the grease filters.
The controls are accessible via the slots
for the grease filters.
 Press the run-on option control 5
15 for approx. 10 seconds, until 1
lights up in the power level display.
 Then press in turn,
– the lighting control ,
– the "" control and then
– the lighting control  again.
If Power management is switched on,
the 1 and IS indicators will light up
constantly.
If it is switched off, 1 and IS will flash.
 Press "" to switch Power
management off.
The 1 and IS indicators will flash.
 To switch it on, press "".
The 1 and IS indicators will light up
constantly.
 Confirm the setting with the run-on
option control 5 15.
24
Operation (Automatic and Manual modes)
Operating hours counters
The number of hours the appliance has
been in operation is stored in memory.
When the Grease filter symbol  or the
Charcoal filter symbol  lights up, the
operating hours counters are signalling
that the filters need to be cleaned or
changed. Further information about
cleaning and changing the filters and
resetting the operating hours counter
can be found under "Cleaning and
care".
 Remove the grease filters.
The controls are accessible via the slots
for the grease filters.
 Press the run-on control 515 and
the operating hours control  at
the same time.
Altering the operating hours counter
for the grease filters
The grease filter symbol  and one of
the fan power level indicators will flash.
You can set the operating hours
counter to suit the type of cooking you
do.
Fan power level indicators 1 to IS show
the time set:
It is set at the factory for 30 hours.
– Select a shorter time of 20 hours if
you fry a lot.
– If you only cook occasionally we
recommend that you still select a
short time because grease which has
built up gradually over a long period
of time will harden on the filter and
make cleaning more difficult.
– Select a longer time of 40 or 50
hours if you use very little fat for
cooking.
 Switch off the cooker hood. The
deflector plate must be retracted.
1............................................... 20 hours
2............................................... 30 hours
3............................................... 40 hours
IS ............................................. 50 hours
 Press the "" symbol for a shorter
operating time, or the "" symbol to
select a longer operating time.
 Confirm the selection by pressing the
operating hours control .
All the indicator lamps will go out
If you do not confirm within 4 minutes,
the cooker hood will revert to the old
setting.
25
Operation (Automatic and Manual modes)
Activating and altering the charcoal
filter operating hours counter
In recirculation mode the operating
hours counter for the charcoal filters
needs to be activated once and the
operating hours counter needs to be
set to suit the kind of cooking you do.
 Switch off the cooker hood. The
deflector plate must be retracted.
 Remove the grease filters.
The controls are accessible via the slots
for the grease filters.
 Press the "" symbol and the
operating hours control  at the
same time.
The Charcoal filter symbol  and one
of the fan power levels will flash.
Fan power level indicators 1 to IS show
the time set:
1............................................. 120 hours
2............................................. 180 hours
3............................................. 240 hours
IS ........................................ Deactivated
 Press the "" symbol for a shorter
operating time, or the "" symbol to
select a longer operating time.
 Confirm the selection by pressing the
operating hours control .
All the indicator lamps will go out.
26
If you do not confirm within 4 minutes,
the cooker hood will revert to the old
setting.
Operation (Automatic and Manual modes)
Reading the filter operating hours
counter
To check the percentage of time set
already used
 Use the On/Off control  to switch
the fan on.
 Press and hold the operating hours
control 
– Once, to read the Grease filter
operating hours. The grease filter
symbol  lights up.
– Twice, to read the Charcoal filter
operating hours. The Charcoal filter
symbol  lights up.
One or more of the power level
indicators will flash.
The number of fan power level
indicators flashing shows the
percentage of the operating time which
has already been used up.
1 ................................................... 25 %
1 and 2 ......................................... 50 %
1 to 3 ............................................ 75 %
1 to IS ......................................... 100 %
The number of operating hours used
remains in the memory, even when
the appliance is switched off or there
is a power cut.
27
Energy saving tips
This cooker hood operates very
efficiently and economically. The
following will help you to save even
more energy when using it:
– Ensure that there is sufficient
ventilation in the kitchen when
cooking. In extraction mode, if there
is insufficient air flow the cooker
hood cannot operate efficiently and
this causes increased operating
noise levels.
– Always cook with the lowest possible
setting. This produces fewer cooking
vapours, so you can use a lower
cooker hood power level and
therefore benefit from reduced
energy consumption.
– Use the Con@ctivity function. The
cooker hood will switch on and off
automatically at the optimum power
level for the cooking you are doing,
which ensures low energy
consumption.
– If you are operating the cooker hood
manually, please note the following:
– Check the power level selected on
the cooker hood. A lower power
level is generally sufficient for the
majority of cooking. Only use the
intensive setting when necessary.
– When a large volume of cooking
vapours are being produced,
switch to a high power level in
good time. This is more efficient
than operating the cooker hood for
longer to try to capture cooking
vapours which have already been
distributed throughout the kitchen.
28
– Make sure that you switch the
cooker hood off after use.
If cooking vapours and odours still
need to be removed from the
kitchen air after cooking, use the
run-on function. The fan will
switch off automatically after the
selected run-on time.
– Clean or change the filters at regular
intervals. Heavily soiled filters reduce
performance, increase the risk of fire
and are unhygienic.
Cleaning and care
Casing
General information
The surfaces and controls are
susceptible to scratches and
abrasion.
Please observe the following
cleaning instructions.
 All external surfaces and controls can
be cleaned using hot water with a
small amount of washing-up liquid
applied with a well wrung-out soft
sponge or cloth.
Do not let moisture get into the
cooker hood.
Only use a damp cloth when
cleaning. This is particularly
important around the controls.
 After cleaning, wipe the surfaces dry
using a soft cloth.
Do not use:
– cleaning agents containing soda,
acids, chlorides or solvents,
– abrasive cleaning agents, e.g.
powder cleaners or cream cleaners
and abrasive sponges, as well as pot
scourers or sponges which have
been used previously with abrasive
cleaning agents. These will damage
the surface material.
Important for appliances with
stainless steel surfaces
(This information does not apply to the
controls).
 Stainless steel surfaces can be
cleaned with a proprietary nonabrasive cleaning agent designed
specifically for use on stainless steel.
 To help prevent re-soiling, a
proprietary conditioning agent for
stainless steel (available from Miele)
can also be used. Follow the
manufacturer’s instructions on the
packaging.
Important for the controls
Do not leave soiling on the controls
for any length of time.
Otherwise they may suffer
discolouration or damage.
Remove soiling straight away.
 Please observe the general notes on
cleaning earlier in this section.
Do not use stainless steel cleaning
agents on the controls.
29
Cleaning and care
Grease filters
Cleaning interval
The re-usable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapours, preventing soiling of the
cooker hood.
The grease filters should be cleaned
regularly (at least every 3 - 4 weeks) to
avoid a build-up of grease.
 An oversaturated filter is a fire
hazard.
Clean them immediately if the Grease
filter operating hours symbol  lights
up.
 You can set the operating hours
counter for the grease filters to suit
the type of cooking you do (see
"Operation").
Removing a grease filter
The grease filter can fall out when
you are handling it.
This can result in damage to the filter
and the hob below.
Make sure you hold the filter
securely at all times when handling
it.
 Remove the grease filters from the
slots on the front of the housing
30
Cleaning and care
Cleaning the grease filters by hand
 Clean the filters with a soft nylon
brush in a mild solution of hot water
and a small amount of washing-up
liquid. Do not use "neat" washing up
liquid.
Unsuitable cleaning agents
Unsuitable cleaning agents can cause
damage to the surface of the filters if
used regularly.
Do not use:
– cleaning agents containing descaling
agents
– powder cleaners, cream cleaners
– aggressive multi-purpose cleaning
agents or spray cleaners for grease
– oven sprays
Cleaning the grease filters in the
dishwasher
 Place the filters as upright as
possible in the lower basket, with the
short sides upright, ensuring the
spray arm is not obstructed.
 Use a proprietary household
dishwasher detergent.
 Select a dishwasher programme with
a wash temperature between 50°C
and 65°C.
Depending on the cleaning agent
used, cleaning the filters in a
dishwasher can cause permanent
discolouration to the surface.
However, this will not affect the
functioning of the filters in any way.
After cleaning
 After cleaning, leave the filters to dry
on an absorbent surface before
replacing them.
 When removing the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
housing to prevent the risk of these
catching fire.
 Push the grease filters back in.
31
Cleaning and care
Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be re-set.
Fitting/replacing charcoal filters
The slots for the charcoal filters are
located above above the grease filters.
 Whilst the fan is switched on, press
the operating hours control  for
approx. 3 seconds, until only the 1 is
flashing.
The grease filter symbol  goes out.
If you want to clean the grease filter(s)
before the operating hours counter has
reached its maximum,
 Press the operating hours control
 for approx. 6 seconds, until only
the 1 is flashing.
 Remove the cover. It is held in place
by magnets.
 Take the charcoal filters out of their
packaging.
Charcoal filters
With recirculation mode, two charcoal
filters must be fitted in addition to the
grease filters. These are designed to
absorb cooking odours.
Charcoal filters can be obtained from
your Miele dealer or via the internet at
www.miele-shop.com. See end of this
booklet for contact details, and
"Technical data" for type and reference
number.
32
 Insert the charcoal filters in the slots.
 Replace the cover.
 When fitting for the first time, activate
the operating hours counter (see
"Operation").
Cleaning and care
When to change the charcoal filters
 Always replace the charcoal filters
when they no longer absorb kitchen
odours effectively.
They should, however be replaced at
least every 6 months.
The charcoal filter operating hours
symbol  will light up to remind you to
change the charcoal filters.
 The charcoal filter operating hours
counter needs to be activated before
using for the first time (see
"Operation").
Resetting the charcoal filter
operating hours counter
After changing the charcoal filters, the
operating hours counter needs to be reset.
 To do this, with the fan switched on,
press the operating hours control
 once, then press it again and
hold it for approx. 3 seconds until
only the 1 is flashing. The Charcoal
filter symbol  will go out.
If you want to replace the charcoal
filters before the operating hours
counter has reached its maximum:
 Press the operating hours control
 twice and hold it for approx. 6
seconds until only the 1 is flashing.
Disposing of the charcoal filters
 Used charcoal filters can be disposed
of with the normal household waste.
33
Cleaning and care
Remote control
Cleaning the remote control
 Only clean the surface with a damp
cloth. Do not use too much water to
avoid moisture penetrating the
casing.
Changing the battery
Use only the type of battery listed.
Do not use rechargeable batteries.
The remote control requires one 3 V CR
2032 battery.
The battery must be changed if cooker
hood functions can no longer be
selected using the remote control or if
the LED light on the remote control
does not light up, or only lights up
dimly when a control is pressed.
Cooker hood functions can still be
selected using the cooker hood
controls.
34
 Use a screwdriver to loosen the two
screws on the back and remove the
cover.
 Remove the old battery and replace
with a new one, making sure the
polarity is correct.
 Replace the cover.
 Dispose of the old battery
responsibly.
After Sales / Guarantee
In the event of a fault which you cannot
remedy yourself, please contact your
Miele dealer or the Miele Service
Department.
Contact details for Miele are given at
the back of this manual. N.B. A call-out
charge will be applied to service visits
where the problem could have been
resolved as described in these
instructions.
When contacting your dealer or Miele,
please quote the model and serial
number of your appliance.
These are shown on the data plate.
Position of the data plate
The data plate is visible after removing
the grease filters.
Guarantee: U.K.
In the U.K., the appliance is guaranteed
for 2 years from the date of purchase.
However, you must activate your cover
by calling 0330 160 6640 or registering
online at www.miele.co.uk.
Guarantee: Other countries
For information on the appliance
guarantee specific to your country
please contact Miele. See end of this
booklet for contact details.
35
Installation
Appliance dimensions
36
Installation
a Extraction, recirculation with
conversion kit DUU 150.
b The wall unit carcase needs to be 38
mm shorter than the wall unit door.
c Installation is also possible in a 600
mm wide unit. In this case the unit
door must open upwards to allow
access to the grease filters. This
also applies for adjacent units.
d The ducting can also be connected
at the back.
e After installation the wall unit can be
fitted with an interim panel. If this is
done make sure that the slots for the
grease filters and, for recirculation
mode, the charcoal filters remain
easily accessible.
f Alternatively the wall unit can be
fitted with side sections.
The height of the wall unit and cut-out
dimensions must take account of any
accessories fitted, e.g. silencer, DSM
module.
37
Installation
Safety distance between hob and cooker hood (S)
When planning the installation height of your cooker hood, the minimum safety
distance between the top of a cooker or hob and the bottom of the cooker
hood is as follows, unless a greater distance is specified by the manufacturer of
your cooking appliance.
See "Warning and Safety" instructions for further information.
Cooking appliance
Minimum distance S
Electric hob
450 mm
Electric grill, deep fat fryer (electric)
650 mm
Multi-burner gas hob,
total output ≤ 12.6 kW, no burner > 4.5 kW
650 mm
Multi-burner gas hob,
total output > 12.6 kW and ≤ 21.6 kW,
no burner > 4.8 kW.
760 mm
Multi-burner gas hob,
total output > 21.6 kW,
or multi-burner gas hob where one burner > 4.8 kW.
Not possible
Single burner gas hob, output ≤ 6 kW.
650 mm
Single burner gas hob, output > 6 kW and ≤ 8.1 kW.
760 mm
Single burner gas hob, output > 8.1 kW
38
Not possible
Installation
Installation recommendations
– To achieve optimum vapour
extraction, the cooker hood must
cover the hob. It should be
positioned centrally over the hob, not
to the side of it.
– The hob should be no wider than the
cooker hood, and if possible, it
should be narrower.
Before installation
 Before installation, it is important
to read the information given on the
following pages as well as the
"Warning and Safety instructions" at
the beginning of this booklet.
– The installation area must be easily
accessible. The cooker hood should
be easily accessible and easy to
dismantle in the event that service is
required. This should be taken into
consideration when planning the
position of cupboards, shelves,
ceilings or features in the vicinity of
the cooker hood.
39
Installation
Assembly parts
40
Installation
a 1 collar for exhaust ducting  150
mm.
b 1 reducing collar for exhaust
ducting  125 mm.
c 1 non-return flap for fitting into the
exhaust socket on the motor unit
(not needed for recirculation mode)
d 2 covers for the brackets.
4 screws M4 x 16 mm for securing the
cooker hood to the brackets and for
securing the spacer strip.
4 screws M4 x 8 mm for securing the
spacer strip.
e 2 brackets to support the appliance
in the wall unit.
f 1 cover for the charcoal filter slots.
g 1 spacer strip to conceal the gap
between the rear of the appliance
and the wall.
h Conversion kit for recirculation
mode (the conversion kit is not
supplied, but is available as an
optional accessory - see "Technical
data"). The kit contains an exhaust
grille and flexible aluminium hose
with hose clips.
2 screws 4 x 40 mm,
2 plugs 6 x 36 mm for securing the
cooker hood to the wall (only when
fitting into a 900 mm wide wall unit).
4 screws 4 x 25 mm for securing a
900 mm wide cooker hood.
4 adhesive covers to conceal the
fixing holes which are not required.
12 screws 4 x 15 mm for securing the
cooker hood into the wall unit.
1 x T 20 angled key
41
Installation
42
Installation
Repositioning the ducting
The motor unit can be rotated to allow
the ducting to be fitted at the back of
the cooker hood. This may be
necessary if the cooker hood is being
fitted in a reduced height wall unit, for
example. Repositioning is carried out
before installing the cooker hood.
The cooker hood must be
disconnected from the mains.
 Undo the fixing screws on the front
panel of the cooker hood housing
and remove the panel.
 Undo the screws from the cover on
the back of the cooker hood housing
and remove the cover.
 Unscrew the fixing screws on the
motor unit.
 Turn the motor unit towards the rear
and position the exhaust socket in
the cut-out in the back panel of the
cooker hood housing. Ensure when
turning the motor unit that the
connection cable does not become
detached.
 Secure the motor unit in its new
position.
 Now secure the cover taken from the
back panel to the top of the housing.
 Refit the front panel and secure it
using the screws.
EXT models
On appliances with an external motor
(EXT models), the exhaust socket (not
the motor unit) needs to be
repositioned.
 Unscrew the fixing screws and pull
the top and bottom sections of the
socket apart.
 Position the top section of the socket
over the cut-out in the back panel of
the cooker hood housing and attach
the bottom section to it from inside.
Secure the exhaust socket with the
fixing screws.
43
Installation
 Pull the grease filters out of the slots
in the front of the cooker hood
housing.
The spacer strip needs to be attached
to the back of the cooker hood housing
before the cooker hood is installed in
the wall unit. The spacer strip can be
attached to the upper  or lower edge
 of the deflector plate.
 Calculate the measurement T for the
spacer strip
 Cut the spacer strip to measurement
T. Score along the groove for the
smaller measurement as shown, and
remove the surplus.
44
 Screw the spacer strip to the back of
the cooker hood at the required
position. Use the screws supplied. To
attach the spacer strip to the lower
edge  use the screws previously
removed from the housing unit.
Installation
 Screw the brackets onto the right and
left inside walls of the housing unit so
that they are flush with the bottom
edges of the unit. The brackets are
designed for 16 and 19 mm thick unit
sides. Orientate the bracket so that
the vertical depth matches the
thickness of the unit side, as shown.
 Fit the screws for attaching the
cooker hood so that they protrude by
about 5 mm, as shown. Only use the
front screws when fitting a 900 mm
wide cooker hood in a 600 mm wide
wall unit.
45
Installation
Before connecting the cooker hood
to the electricity supply, please see
"Electrical connection" and "Warning
and Safety instructions".
 Connect the cooker hood to the
electricity supply.
 Press the "" button on the remote
control.
The motor switches on, the deflector
plate comes out.
 When the deflector plate is extended,
disconnect the cooker hood from the
electricity supply.
The motor will switch off, the deflector
plate remains extended.
For safety reasons it is essential that
the cooker hood is only fitted into a
wall unit which is already installed. It
cannot be fitted into the wall unit
before the wall unit is installed.
 Fit the cooker hood into the wall unit
from below. Guide it back over the
safety notch until it is correctly hung
in the wall unit.
To secure the cooker hood in the wall
unit, the deflector plate must be
extended. Electrical connection is
required to do this.
46
Installation
 Press the On/Off control  on the
cooker hood or the "" control on
the remote control repeatedly until
the fan switches off.
The motor will switch off. The deflector
plate goes back in.
 Tighten the four fixing screws from
below.
 When fitting a 900 mm wide cooker
hood in a 600 mm wide wall unit,
insert the two rear screws at this
stage.
If the wall unit has side sections, you
will also need to secure it to the base
on either side.
 Reconnect the cooker hood to the
electricity supply.
The motor will switch on again.
47
Installation
When fitting a 900 mm wide cooker
hood into a 900 mm wide housing unit
without side base supports, the
retaining brackets supplied are used to
align the cooker hood and provide
additional support. The retaining
brackets are secured to the back panel
of the wall unit.
If the wall unit does not have a solid
back panel, the cooker hood can be
secured directly to the wall using the
screws and plugs supplied.
An angled key is supplied in case the
screws are difficult to access.
 Loosen the retaining bracket screws
and push the brackets back against
the rear wall.
 Align the cooker hood and mark the
position of the fixing holes in the wall
unit.
 Now secure the brackets to the wall
unit.
48
 Realign the cooker hood and tighten
up the screws on the casing.
 Alternatively, the retaining brackets
can be secured to the top of the
housing unit. To do this, secure the
retaining brackets to the front fixing
points on the casing.
 Use the adhesive covers supplied to
conceal the fixing holes on the
deflector plate which are not used.
Installation
 Secure the spacer strip to the bottom
of the wall unit as well.
 The covers for the brackets are
designed for 16 mm and 19 mm thick
unit sides. Turn the covers so that
they are in the appropriate position
and fit them onto the brackets.
 Insert the cover for the charcoal filter
slots as shown and close it. It is held
in place by magnets.
49
Installation
 Take the grease filters out and
remove any protective foil. Replace
the grease filters.
Exhaust socket
dai2699
 Attach the exhaust ducting, e.g.
flexible hose, to the exhaust socket
using a hose clip (available as an
optional accessory). When using
 125 mm ducting, fit the reducing
collar supplied into the exhaust
socket (see "Connection for air
extraction").
 Insert the non-return flap, if required.
Make sure that it opens easily and
closes again by itself.
 Attach the exhaust ducting to the
exhaust socket on the cooker hood.
 See "Connection for air extraction"
for further instructions on fitting the
ducting.
50
Installation
Setting up for recirculation
mode
If site conditions are not suitable for the
cooker hood to be used with air
extraction, the appliance must be set
up for recirculation. A conversion kit,
available through your dealer of from
Miele is required for operating the
cooker hood in recirculation mode. You
will also need two charcoal filters (see
"Technical data").
 Fit the conversion kit as described in
the installation instructions supplied
with the kit. Make sure that the slats
in the exhaust grille point towards the
centre of the room and not towards a
wall or the ceiling.
A non-return flap is not used in
recirculation mode.
 Fit the charcoal filters (see "Cleaning
and care").
Electrical connection
Refer to the notes in “Electrical
connection” and “Warning and
Safety instructions” before
connecting to the electricity supply.
Conversion kit DUU 150 with a plastic
grille is suitable for fitting in a nonvisible area at the top of the wall unit.
 For appliances connected to an
external motor (EXT models):
Connect the cooker hood and the
external motor using the connection
cable and the six-pole plug
connector.
 Connect the cooker hood to the
electricity supply.
Conversion kit DUU 151 with a
stainless steel grille is recommended if
the grille is to be fitted in an area which
is visible.
51
Electrical connection
All electrical work should be
undertaken by a suitably qualified
and competent person in strict
accordance with current national and
local safety regulations (BS 7671 in
the UK).
Installation, repairs and other work
by unqualified persons could be
dangerous, for which the
manufacturer cannot be held liable.
Ensure power is not supplied to the
appliance until after installation or
repair work has been carried out.
Do not connect the appliance to the
mains electricity supply by an
extension lead. These do not
guarantee the required safety of the
appliance.
The connection data is given on the
data plate. This is visible when the
grease filters have been removed.
Ensure that this data matches the
household mains supply.
Connection of this appliance should be
made via a suitable isolator or a double
pole fused spur connection unit which
complies with national and local safety
regulations and the On-Off switch
should be easily accessible after the
appliance has been built in. When
switched off there must be an all-pole
contact gap of 3 mm in the switch
(including switch, fuses and relays
according to EN 60335).
52
If the switch is not accessible after
installation (depending on country), an
additional means of disconnection must
be provided for all poles.
For extra safety it is advisable to protect
the appliance with a suitable residual
current device (RCD). Contact a
qualified electrician for advice.
Important
This appliance is supplied for
connection to an a.c. 230 V single
phase 50 Hz supply. The wires in the
mains lead are coloured in accordance
with the following code:
Green/yellow ..................................earth
Blue..............................................neutral
Brown ................................................live
WARNING:
THIS APPLIANCE MUST BE
EARTHED
Connection for air extraction
 If the cooker hood is used at the
same time as a heating appliance
that relies on oxygen from the same
room, there is a risk in certain
circumstances of toxic fumes
building up.
It is essential that the "Warning and
Safety" instructions are observed.
The cooker hood should be installed
according to local and national
building regulations. Seek approval
from the building inspector where
necessary.
– Ensure that all connections are
strong and airtight.
Remember that any constriction of
the air flow will reduce extraction
performance and increase operating
noise.
 If the exhaust is ducted through an
outside wall, a telescopic wall vent or
a roof vent (available as an optional
accessory) is recommended.
 Use smooth or flexible ducting made
from approved non-flammable
materials for exhaust ducting.
 When using an external motor, make
sure that the exhaust ducting is
sufficiently rigid. The external motor
can cause an underpressure which
can result in the exhaust ducting
distorting.
 To achieve the most efficient air
extraction with the lowest noise
levels, please note the following:
– To ensure efficient air extraction, the
diameter of the exhaust ducting
should not be less than 150 mm.
– If flat ducting is being used, the cross
section must not be smaller than the
cross sectional area of the exhaust
socket.
– The exhaust ducting should be as
short and straight as possible.
 If the exhaust air is to be ducted into
a flue, the ducting must be directed
in the flow direction of the flue.
 When ducting is horizontal it must be
laid to slope away at at least 1 cm
per metre. This is to ensure that
condensate cannot drain back into
the appliance.
 If the exhaust ducting is to run
through rooms, ceiling space etc.
where there may be great variations
in temperature between the different
areas, the problem of condensation
will need to be addressed. The
exhaust ducting will need to be
suitably insulated.
– Only use wide radius bends.
– The exhaust ducting must not be
kinked or compressed.
53
Connection for air extraction
Condensate trap
In addition to insulating the exhaust
ducting, we recommend that a suitable
condensate trap is also installed to
collect and evaporate any condensate
which may occur.
Condensate traps for 125 mm or 150
mm ducting are available as optional
accessories.
 When installing a condensate trap,
ensure that it is positioned vertically
and if possible directly above the
exhaust socket.
The arrow on the housing indicates
the direction of air-flow.
A condensate trap is integrated in
cooker hoods which are designed for
connection to an external motor
(model......EXT).
54
Silencer
To achieve even further reductions in
noise levels, a special silencer (optional
accessory) can be fitted in the ducting
system.
Extraction mode
The silencer not only reduces noise
from the motor outside the house, but
also sounds from outside (e.g. traffic
noise). For this reason the silencer must
be positioned as close as possible to
the ducting exit .
Connection for air extraction
Recirculation mode
The silencer needs to be positioned
between the exhaust socket and the
directional unit . Ensure there is
adequate space for fitting it.
Extraction mode with external motor
To minimise noise from the motor in the
kitchen, the silencer should be
positioned in front of the external motor
 if possible, or, if the ducting is long,
above the exhaust socket on the
cooker hood . In the case of an
external motor located inside the
house, fitting a silencer behind the
external motor  reduces the noise of
the motor outside the house.
55
Activating Con@ctivity 2.0
Installing the Con@ctivity 2.0
Stick
In order to use the Con@ctivity 2.0
function, the hob must first be fitted
with the Con@ctivity 2.0 Stick.
Activating the cooker hood
Signing on/off is carried out with the
deflector plate retracted.
 Please read the separate installation
instructions supplied with the
Con@ctivity 2.0 Stick.
Activating Con@ctivity 2.0
 Remove the grease filters.
Wireless connection must be activated
between the hob and the cooker hood
before the Con@ctivity 2.0 function can
be used.
The controls are accessible via the slots
for the grease filters.
Both appliances must be installed and
operational.
Wireless connection must be activated
on the cooker hood and the hob at the
same time. Activation on the cooker
hood is described below.
Activation on the hob is described in
the relevant Operating and installation
instructions. Please refer to the
Operating instructions before starting.
Activate the cooker hood first, then the
hob.
 The hob and cooker hood must be
switched off.
 Press the run-on option control
515 for approx. 10 seconds until
the indicator for power level 1 lights
up.
 Then press in turn,
– the "" control,
– then the "" control,
– then the lighting control .
If the remote control is already
activated, 2 and 3 will light up
constantly. If there is no wireless
connection 2 and 3 will flash at the
same time.
 To activate Con@ctivity 2.0, press the
"" control.
The search for a signal will start.
 Meanwhile, start activating the hob.
56
Activating Con@ctivity 2.0
Activating the hob
Activation failed
 While the cooker hood is searching
for a signal, start activating the hob.
More information about this can be
found in the Operating instructions
for the hob.
 If connection cannot be established
despite activating the Con@ctivity
function on the cooker hood and
hob, the function must be
deactivated on both appliances and
then the procedure repeated.
 When the hob registers that
connection has been established,
confirm activation on the cooker
hood with the run-on option control
515. All indicators will go out.
 Confirm activation on the hob.
Con@ctivity 2.0 is now ready to use.
If you do not confirm within 4 minutes,
activation will not take place.
You only need to carry out the
activation procedure once. If the
appliances are disconnected from the
electricity supply, during a power cut
for example, they will still remain
activated.
Deactivating Con@ctivity 2.0
 Deactivation on the cooker hood is
carried out in the same way as
activation, by selecting "" instead
of "".
 To deactivate the hob, please refer to
the Operating instructions supplied
with it.
Please bear in mind that disabling the
signal will also disable any remote
control function and this will have to
be activated again.
57
Signing on/off the remote control
If the connection has been lost between
the remote control and the cooker
hood, they must be signed on again. To
do this, the remote control function on
the cooker hood and the remote control
must be signed off first of all.
Signing on/off is carried out with the
deflector plate retracted.
Signing on and off must be done at the
same time on the cooker hood and the
remote control. Signing on/off mode
has to be accessed on the cooker hood
first, then on the remote control.
To access Signing on/off mode on
the cooker hood
 Press the run-on option control
515 for approx. 10 seconds until
the indicator for power level 1 lights
up.
 Then press in turn,
– the "" control,
 Remove the grease filters.
– then the "" control,
The controls are accessible via the slots
for the grease filters.
– then the lighting control .
 Then access the Signing on/off mode
on the remote control immediately.
To access Signing on/off mode on
the remote control
 Press both arrow controls  at the
same time and hold for about 5
seconds until the remote control LED
flashes.
 Press the lighting control .
To sign off
 In Signing on/off mode press the ""
control on the cooker hood and then
on the remote control.
The remote control LED will flash
steadily.
After approx. 10 seconds the remote
control LED will flash on and off twice
with a longer interval between the
flashes. The remote control has now
been signed off. The LED will go out
after a short while.
58
Signing on/off the remote control
 Confirm the signing off procedure by
pressing the run-on option control
515 on the cooker hood. All
indicators will go out.
Please bear in mind that disabling the
signal will also disable any
Con@ctivity 2.0 function and this will
have to be activated again.
To start the signing on procedure
 In Signing on/off mode press the ""
control on the cooker hood first and
then on the remote control.
The search for a signal will commence.
The remote control LED will flash
steadily.
After approx. 30 seconds the remote
control LED will flash on and off 4 times
at short intervals. The connection has
been established. The LED will go out
after a short while.
 Confirm signing on with the cooker
hood run-on option control 515. All
indicator lights will go out.
The remote control can now be used.
If you do not confirm your selection
within 4 minutes, activation will not take
place.
To cancel the signing on procedure
 If it is not possible to sign on the
procedure can be cancelled by
pressing the run-on option control
515 on the cooker hood and on the
remote control.
 The signing on procedure must then
be repeated. To do this the cooker
hood and the remote control must
first be signed off.
59
Technical data
Fan motor*
90 W
Hob lighting
DA 3660
2 x 4,5 W
DA 3690
3 x 4,5 W
Total connected load*
DA 3660
99 W
DA 3690
103,5 W
Voltage, frequency
AC 230 V, 50 Hz
Fuse rating
Mains connection cable length
5A
1.5 m
Weight
DA 3660
16 kg
DA 3690
19 kg
DA 3660 EXT
13 kg
DA 3690 EXT
16 kg
* For EXT models, the connected load and extraction power will depend on the type of
external motor fitted.
Length of connection cable to external motor: 1.9 m
Special accessories for recirculation mode:
Conversion kit DUU 150 or DUU 151 and Miele charcoal filter set DKF 19. Contains two
charcoal filters.
Conformity declaration
Miele hereby declares that the cooker hoods listed at the end of this booklet
comply with the basic requirements and other relevant regulations of Guideline
1999/5/EC.
A copy of the full Declaration of Conformity can be obtained from the address at
the end of this booklet.
60
Technical data
Data sheet for domestic cooker hoods
In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No.
66/2014
MIELE
Model name / identifier
DA 3660
Annual Energy Consumption (AEChood)
31,5 kWh/year
Energy efficiency class
A+ (most efficient) to F (least efficient)
A+
Energy efficiency index (EEIhood)
41,5
Fluid Dynamic Efficiency (FDEhood)
36,8
Fluid Dynamic Efficiency class
A (most efficient) to G (least efficient)
A
Lighting Efficiency (LEhood)
46,7 lx/W
Lighting Efficiency class
A (most efficient) to G (least efficient)
A
Grease Filtering Efficiency
82,8 %
Grease Filtering Efficiency class
A (most efficient) to G (least efficient)
C
Airflow at best efficiency point
333,0 m3/h
Air flow (min. speed)
220 m3/h
Air flow (max. speed)
400 m3/h
Air flow (intensive or boost setting)
640 m3/h
Max. air flow (Qmax)
640 m3/h
Air pressure at best efficiency point
402 Pa
Airborne acoustical A-weighted sound power emissions (min. speed)
39 dB
Airborne acoustical A-weighted sound power emissions (max. speed)
51 dB
Airborne acoustical A-weighted sound power emissions (intensive or
boost setting)
63 dB
Electrical power input at best efficiency point
101,0 W
Power consumption in off mode (Po)
W
Power consumption in standby mode (Ps)
0,15 W
Nominal power of lighting system
9,0 W
Average illumination of the lighting system on the cooking surface
420 Ix
Time increase factor
0,7
61
Technical data
Data sheet for domestic cooker hoods
In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No.
66/2014
MIELE
Model name / identifier
DA 3690
Annual Energy Consumption (AEChood)
34,7 kWh/year
Energy efficiency class
A+ (most efficient) to F (least efficient)
A+
Energy efficiency index (EEIhood)
44,4
Fluid Dynamic Efficiency (FDEhood)
36,8
Fluid Dynamic Efficiency class
A (most efficient) to G (least efficient)
A
Lighting Efficiency (LEhood)
40,0 lx/W
Lighting Efficiency class
A (most efficient) to G (least efficient)
A
Grease Filtering Efficiency
82,8 %
Grease Filtering Efficiency class
A (most efficient) to G (least efficient)
C
Airflow at best efficiency point
333,0 m3/h
Air flow (min. speed)
220 m3/h
Air flow (max. speed)
400 m3/h
Air flow (intensive or boost setting)
640 m3/h
Max. air flow (Qmax)
640 m3/h
Air pressure at best efficiency point
402 Pa
Airborne acoustical A-weighted sound power emissions (min. speed)
39 dB
Airborne acoustical A-weighted sound power emissions (max. speed)
51 dB
Airborne acoustical A-weighted sound power emissions (intensive or
boost setting)
63 dB
Electrical power input at best efficiency point
101,0 W
Power consumption in off mode (Po)
W
Power consumption in standby mode (Ps)
0,15 W
Nominal power of lighting system
13,5 W
Average illumination of the lighting system on the cooking surface
540 Ix
Time increase factor
0,7
62
United Kingdom
Miele Co. Ltd.
Fairacres, Marcham Road
Abingdon, Oxon, OX14 1TW
Customer Contact Centre Tel: 0330 160 6600
E-mail: mielecare@miele.co.uk
Internet: www.miele.co.uk
Australia
Miele Australia Pty. Ltd.
ACN 005 635 398
ABN 96 005 635 398
1 Gilbert Park Drive, Knoxfield, VIC 3180
Tel: 1300 464 353
Internet: www.miele.com.au
China
Miele (Shanghai) Trading Ltd.
1-3 Floor, No. 82 Shi Men Yi Road
Jing' an District
200040 Shanghai, PRC
Tel: +86 21 6157 3500, Fax: +86 21 6157 3511
E-mail: info@miele.cn, Internet: www.miele.cn
Miele (Hong Kong) Limited
41/F - 4101, Manhattan Place
23 Wang Tai Road
Kowloon Bay, Hong Kong
Tel: (852) 2610 1331, Fax: (852)2610 1013
Email: mielehk@miele.com.hk
India
Miele India Pvt. Ltd.
Ground Floor, Copia Corporate Suites
Plot No. 9, Jasola
New Delhi - 110025
Tel: 011-46 900 000, Fax: 011-46 900 001
E-mail: customercare@miele.in, Internet: www.miele.in
Ireland
Miele Ireland Ltd.
2024 Bianconi Avenue
Citywest Business Campus, Dublin 24
Tel: (01) 461 07 10, Fax: (01) 461 07 97
E-Mail: info@miele.ie, Internet: www.miele.ie
Manufacturer: Miele & Cie. KG
Carl-Miele-Straße 29, 33332 Gütersloh, Germany
63
Malaysia
Miele Sdn Bhd
Suite 12-2, Level 12
Menara Sapura Kencana Petroleum
Solaris Dutamas No. 1, Jalan Dutamas 1
50480 Kuala Lumpur, Malaysia
Phone: +603-6209-0288
Fax: +603-6205-3768
New Zealand
Miele New Zealand Limited
IRD 98 463 631
Level 2, 10 College Hill
Freemans Bay, Auckland 1011, NZ
Tel: 0800 464 353
Internet: www.miele.co.nz
Singapore
Miele Pte. Ltd.
163 Penang Road
# 04 - 03 Winsland House II
Singapore 238463
Tel: +65 6735 1191, Fax: +65 6735 1161
E-Mail: info@miele.com.sg
Internet: www.miele.sg
South Africa
Miele (Pty) Ltd
63 Peter Place, Bryanston 2194
P.O. Box 69434, Bryanston 2021
Tel: (011) 875 9000, Fax: (011) 875 9035
E-mail: info@miele.co.za
Internet: www.miele.co.za
United Arab Emirates
Miele Appliances Ltd.
P.O. Box 11 47 82
Gold & Diamond Park, Sheikh Zayed Road
Building 6 / Offices Nos. 6-214 to 6-220
Dubai
Tel: +971-4-341 84 44
Fax: +971-4-341 88 52
E-Mail: info@miele.ae
Internet: www.miele.ae
DA 3660
DA 3690
DA 3660 EXT
DA 3690 EXT

en-GB
M.-Nr. 09 885 260 / 02
Download PDF

advertising