Miele | 26112450USA | Specifications Sheet | Miele 26112450USA Specifications Sheet

Miele 26112450USA Specifications Sheet
30” Rangetop
KMR 1124 G/LP
Shown: KMR 1135 G under DAR 1120
Please note: This information is subject to change
8mieleusa.com
Specification Sheet TRS 04252018
30” Rangetop
SPECIFICATIONS
Overall Unit Dimensions
2915/16” (762 mm) W x 71/2” (191 mm) H [Not including grates] x 261/2” (673 mm) D [Depth to control panel]
Niche
Minimum Cabinet Niche Opening
Minimum Support Thickness
30” (762 mm) W x 251/16” (636.6 mm) D [To back of crontrol panel]
3
/4” (19 mm)
Gas
Gas Line Connection
1/2” NPT
Operational Altitudes
High Altitude
Miele Natural Gas and LP Rangetops will function up to 9,800 ft. in altitude without
adjustment. If an installation exceeds these elevations, please contact rangejetkit@mieleusa.com.
Electrical
Electrical Requirements
Power Cord
120V, 60Hz, 15 Amps
Yes - NEMA 5-15 plug, 4 ft (1.2 m) long
Shipping
Shipping Weight
110.2 lbs. (50 kg)
Installation Accessories
12” Backguard
RBGAG1230
20” Backguard
RBGAG2030
40” Backsplash
RBS30
Support
Call
800.843.7231
Miele Website
20/20 Link
8www.mieleusa.com
82020technologies.com
KMR 1124
Item 26112450USA
HR 1124 LP
Item 26112451USA
Page 2 of 4
30” Rangetop
PRODUCT VIEWS
Front View
Side View
Rear View
(1.2m)
Page 3 of 4
30” Rangetop
30” Rangetop BTU Output
KMR1124 Burners
Gas Burners:
Total BTU Output
(1) 12,500 BTU (G/LP);
(3) 19,500 BTU (G/LP)
71,000 BTU (G/LP)
Note:
Please observe safe distances to rear
combustible surfaces of 12” (305 mm)
clearances. For zero clearance
installation, Miele Backguards will
satisfy the required distance to
combustible surfaces. The Miele
Backguard is available in 12” (305 mm)
or 20” (508 mm) heights.
Page 4 of 4
Specification Sheet TRS 04252018
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising