DATA SHEET 48" Professional Range B 47 7/8" Model no: RGV2-486GD-N, RGV2-486GD-L RDV2-486GD-N, RDV2-486GD-L (refer page 3 for metric measurements) Product Dimensions C in A Overall height of range (from floor to cooktop, excluding grates and vent trim) 29 1/8" CABINET FACE FOR INSTALLATION WITH PROJECTING CONTROL PANEL min 35 3/4" max 36 3/4" B Overall width of range 47 7/8" C Overall depth of range (excluding handle and dials) 29 1/8" D Depth from rear of chassis to cabinetry face – projecting 25 1/8" E Depth from rear of chassis to cabinetry face – flush CABINET FACE FOR INSTALLATION WITH FLUSH CONTROL PANEL 27 11/16" F Height from countertop to top of pan supports n q o PLAN VIEW 1 3/4" H Height from countertop to bottom of control panel 7 3/4" I Height from countertop to top of door 8 1/16" J Height from countertop to center of handle 9 7/16" K Height from countertop to bottom of door 28 7/8" L Height from countertop to bottom of chassis 35 1/4" M Thickness of handles (not including standoffs) C 29 1/8" F 1 9/16" G Height from countertop to top of vent trim G DATUM : TOP OF COUNTERTOP 1 1/4" N Width of left handle (including standoffs) 15 1/16" O Width of right handle (including standoffs) 31 1/2" P Depth of handle (measured from front of door) 3 1/16" Q Depth of open door to cabinetry face – flush K J I H m 19 1/8" R Adjustable feet height min 1/2" max 1 1/2" A 35 3/4" 36 3/4" p l Cavity Dimensions in Overall height of cavity min 35 3/4" max 36 3/4" Overall width of cavity Overall depth of cavity for projecting control panel Overall depth of cavity for flush control panel min 48" max 25 1/8" max 27 11/16" DATUM : BOTTOM OF CHASSIS r q 0 5 10 E FRONT VIEW PROFILE VIEW CABINET FACE FOR INSTALLATION WITH FLUSH CONTROL PANEL 20 inches D B 47 7/8" CABINET FACE FOR INSTALLATION WITH PROJECTING CONTROL PANEL INDICATES PRODUCT DATUM -------------------------------------------- DATE: 24.04.2018 IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16"). Read the installation guide for detailed information on installing the product. For full installation instructions and specifications visit fisherpaykel.com DATA SHEET 48" Professional Range C C MINIMUM CLEARANCE: NEAREST VERTICAL COMBUSTIBLE SURFACE Model no: MINIMUM CLEARANCE: NEAREST VERTICAL COMBUSTIBLE SURFACE D RGV2-486GD-N, RGV2-486GD-L MINIMUM CLEARANCE: COMBUSTIBLE SURFACE RDV2-486GD-N, RDV2-486GD-L (refer page 4 for metric measurements) Clearance Dimensions E CABINET FACE FOR INSTALLATION WITH PROJECTING CONTROL PANEL CABINET FACE FOR INSTALLATION WITH FLUSH CONTROL PANEL D MAXIMUM OVERALL DEPTH OF OVERHEAD CABINETRY MINIMUM CLEARANCE: NON-COMBUSTIBLE SURFACE A Minimum width of ventilation hood installed above range – not shown* B Minimum vertical distance between countertop and cabinet extending above counter 18" C Minimum clearance from left and right edge of range to nearest vertical combustible surface 12" D Minimum clearance from cooking surface to: –– combustible surface centered above the cooking surface –– non-combustible surface centered above the cooking surface E Maximum overall depth of overhead cabinetry PLAN VIEW B in 48" 54" 30" 13" MINIMUM CLEARANCE: ADJACENT OVERHEAD CABINET DATUM : TOP OF COUNTERTOP DATUM : BOTTOM OF CHASSIS FRONT VIEW PROFILE VIEW INDICATES CABINETRY CLEARANCES --------------------------------INDICATES PRODUCT DATUM -------------------------------------------- DATE: 24.04.2018 0 5 10 CABINET FACE FOR INSTALLATION WITH FLUSH CONTROL PANEL 20 inches CABINET FACE FOR INSTALLATION WITH PROJECTING CONTROL PANEL IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16"). Read the installation guide for detailed information on installing the product. For full installation instructions and specifications visit fisherpaykel.com DATA SHEET 48" Professional Range B 1216 Model no: RGV2-486GD-N, RGV2-486GD-L RDV2-486GD-N, RDV2-486GD-L (refer page 1 for imperial measurements) Product Dimensions C A Overall height of range (from floor to cooktop, excluding grates and vent trim) 740 CABINET FACE FOR INSTALLATION WITH PROJECTING CONTROL PANEL CABINET FACE FOR INSTALLATION WITH FLUSH CONTROL PANEL B Overall width of range 1216 C Overall depth of range (excluding handle and dials) 740 D Depth from rear of chassis to cabinetry face – projecting 638 E Depth from rear of chassis to cabinetry face – flush 703 F Height from countertop to top of pan supports q n G Height from countertop to top of vent trim o H Height from countertop to bottom of control panel PLAN VIEW F G DATUM : 204 240 K Height from countertop to bottom of door 734 L Height from countertop to bottom of chassis 895 m 32 N Width of left handle (including standoffs) 393 O Width of right handle (including standoffs) 801 Q Depth of open door to cabinetry face – flush K J I H 45 196 J Height from countertop to centre of handle P Depth of handle (measured from front of door) TOP OF COUNTERTOP 40 I Height from countertop to top of door M Thickness of handles (not including standoffs) C 740 mm min 908 max 933 R Adjustable feet height 77 486 min 13 max 38 A 908 933 p l Cavity Dimensions Overall height of cavity mm min 908 max 933 Overall width of cavity min 1219 Overall depth of cavity for projecting control panel Overall depth of cavity for flush control panel max 638 max 703 DATUM : BOTTOM OF CHASSIS r q FRONT VIEW 0 100 200 400 millimetres D E B 1216 PROFILE VIEW CABINET FACE FOR INSTALLATION WITH FLUSH CONTROL PANEL CABINET FACE FOR INSTALLATION WITH PROJECTING CONTROL PANEL INDICATES PRODUCT DATUM -------------------------------------------- DATE: 24.04.2018 IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16"). Read the installation guide for detailed information on installing the product. For full installation instructions and specifications visit fisherpaykel.com DATA SHEET 48" Professional Range C C MINIMUM CLEARANCE: NEAREST VERTICAL COMBUSTIBLE SURFACE D E CABINET FACE FOR INSTALLATION WITH PROJECTING CONTROL PANEL CABINET FACE FOR INSTALLATION WITH FLUSH CONTROL PANEL Model no: MINIMUM CLEARANCE: NEAREST VERTICAL COMBUSTIBLE SURFACE D RGV2-486GD-N, RGV2-486GD-L MINIMUM CLEARANCE: COMBUSTIBLE SURFACE MAXIMUM OVERALL DEPTH OF OVERHEAD CABINETRY MINIMUM CLEARANCE: NON-COMBUSTIBLE SURFACE PLAN VIEW B RDV2-486GD-N, RDV2-486GD-L (refer page 2 for imperial measurements) Clearance Dimensions mm A Minimum width of ventilation hood installed above range – not shown* 1219 B Minimum vertical distance between countertop and cabinet extending above counter 457 C Minimum clearance from left and right edge of range to nearest vertical combustible surface 305 D Minimum clearance from cooking surface to: –– combustible surface centred above the cooking surface –– non-combustible surface centred above the cooking surface 1372 762 E Maximum overall depth of overhead cabinetry 330 MINIMUM CLEARANCE: ADJACENT OVERHEAD CABINET DATUM : TOP OF COUNTERTOP DATUM : BOTTOM OF CHASSIS FRONT VIEW PROFILE VIEW INDICATES CABINETRY CLEARANCES --------------------------------INDICATES PRODUCT DATUM -------------------------------------------- DATE: 24.04.2018 0 100 200 400 millimetres CABINET FACE FOR INSTALLATION WITH FLUSH CONTROL PANEL CABINET FACE FOR INSTALLATION WITH PROJECTING CONTROL PANEL IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16"). Read the installation guide for detailed information on installing the product. For full installation instructions and specifications visit fisherpaykel.com
advertising