GE | AJCQ10DCG | Spec sheet | GE AJCQ10DCG Spec Sheet

GE AJCQ10DCG Spec Sheet
AJCQ10DCG
GE Appliances 230/208 Volt Built-in Cool-only Room Air Conditioner
Wall Case Dimensions and Installation Information (in inches)
Premium, Deluxe and Value Model
Case Dimensions (in inches)
Note: When installing slide-out chassis units in through-the-wall
Wall
applications, keep louvers free. Do not restrict air flow areas.
15-5/8
Tandem
230/208V
15 Amp
16-7/8
21-13/16
26
Note: When installing units in through-the-wall applications.
Do not restrict air flow areas.
AJCQ12DCD
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
Total volume and shelf
area are calculated by
the Association of Home
Appliance Manufacturers’
standards.
Listed by
Underwriters
Laboratories
Specification Created 2/16
15-3/4
26-1/8
AJCQ10DCG
GE Appliances 230/208 Volt Built-in Cool-only Room Air Conditioner
Built-in RAC Installation
(Pub. 1-G003 pg. 138)
AprilRAC
30.1993
Built-in
Installation
Installation Information: A finished opening
(Pub. 1-G003
pg.
138) April 30.1993
of 26-1/8" x 15-3/4" clear of intrusions
is required.
Keep
Dimensions (in inches)
Brick Block and Brick
Frame Construction
Make frame if desired or caulk
clearance Built-In
of 4" from
side walls.
Brick veneer or frame
Room
Air Conditioners
between case and siding
walls should
have
wood studding
surrounding case
to
Wall
Opening
forBuilt-In
RAB36/37/38
Case
Make frame if desired or caulk
Lintel
Room
Air
Conditioners
provide firm anchoring with screws. Case can be fastened
between case and siding
A finished opening of 26-1/8" x 15-3/4", clear of
directly to brick or block walls
withOpening
screws sunk
lead
Wall
forinRAB36/37/38
Case
intrusions, is required. Keep clearance of 4" from
expansionside
shields.
OUTSIDE
A
finished
opening
of
26-1/8"
x
15-3/4",
clear of
walls. Brick veneer or frame walls should have
intrusions,
is
required.
Keep
clearance
of
4"
from
woodshould
studding
surrounding
provide
firm
Note: Units
be caulked
on allcase
fourtosides
of case
15-3/4
side Case
walls.
Brick
or frame
anchoring
withto
screws.
can
beveneer
fastened
directlywalls should have
26-1/8
to the building
exterior
assure
building
integrity.
wood
to brick or block walls
withstudding
screws surrounding
sunk in lead case to provide firm
15-3/4
Caulking
Wall Case
for shields.
Tenant
Option
Installation
anchoring
with
screws. Case can be fastened directly
26-1/8
expansion
When the air conditioner is offered
tenant
option,
to brickas
orablock
walls
with this
screws sunk in lead
Drip Rail
shields.
wall case provides protectionexpansion
against outside
elements.
RAB48 – includes wall case, exterior grille,
steel closure panel and two layers of insulation.
Standard Wall Case RAB46
Solid-sided wall case fabricated of galvanized steel
with baked enamel finish. Welded areas are coated with
a sealing compound to help resist rust and corrosion.
Polymer gasket surrounds opening to assure tight weather
seal. Aluminum grille (RAG13) is included. Panels on
interior and between case and grille provide weather
protection prior to installation of chassis. Provide
firm anchoring with screws. Case can be fastened
directly to brick or block walls with screws sunk in
lead expansion shields.
Fill open cells
with mortar
or insulation
Plaster Line
Trim Molding
(if desired)
16-7/8
INSIDE
Flexible Mounting Position
Frame Construction
Frame Construction
Lintel
Lintel
15-3/4
26-1/8
15-3/4
26-1/8
Fill open cells
with mortar
or insulation
Brick Block and Brick
Frame Construction
Brick Block and Brick
Frame Construction
Fill open cells
with mortar
or insulation
Plaster Line
Trim Molding
(if desired)
Lintel
OUTSIDE
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website Caulking
at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
Drip Rail
Lintel
INSIDE
16-7/8
OUTSIDE
Caulking
Rail
Flexible MountingDrip
Position
16-7/8
Plaster Line
Trim Molding
(if desired)
Total volume and shelf
area are calculated by
the Association of Home
Appliance Manufacturers’
INSIDE
standards.
Listed by
Underwriters
Laboratories
Specification Created 2/16
AJCQ10DCG
GE Appliances 230/208 Volt Built-in Cool-only Room Air Conditioner
Features and Benefits
10,100/9,900 Cooling BTU
10.6 CEER
On
230/208 Volts
ENERGY STAR® qualified
R-410A refrigerant
Electronic controls with remote
Electronic digital thermostat control
Filter reset
Four-way air direction
Up-front, washable air filter
3 cool / 3 fan speeds
Power interruption restart - Restarts the unit at the setting
prior to the loss of power
Model AJCQ10DCG – Soft Gray
AJCQ12DCF
Specification Created 2/16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising