Movincool | CLASSICPLUS26 | Catalog | MovinCool CLASSICPLUS26 Catalog

www.movincool.com
S.908
E.256
E.256
J
PROGRAM
RUN/
STOP
PROGRAMMING
C
SET
PROG
TANK FULL
FAN MODE
HI/LO
COOL MODE
SET
CLOCK
SET TEMP
ON/OFF
MovinCool—Pioneering Spot Air
Conditioners Since 1982
Welcome to MovinCool, your solution for
quality portable and ceiling‑mount spot air
conditioners. Ever since developing the original
spot air conditioner in 1982, MovinCool has
been redefining the industry and introducing
innovative, cost-effective cooling solutions to
you. From the Classic, Classic Plus and Office
Pro® Series to the latest Ceiling-Mount Series,
MovinCool is dedicated to being the best cooling
solution for your heat-management needs.
MovinCool was established to develop portable
spot air conditioning systems for its parent
company, DENSO Corporation. A leading
component supplier to virtually all of the world’s
major automotive manufacturers—including
Chrysler, Ford, GM, Honda and Toyota—DENSO
employs 130,000 people in 38 countries
throughout the world.
The first MovinCool portable spot air
conditioners were so effective in DENSO factories
and plants that the company decided to make
them available commercially. Filling a critical
need for spot cooling, MovinCool units were
soon being put to effective use in a wide array
of demanding manufacturing environments
throughout North America.
Today, as manufacturing, telecom,
computer and office-equipment demands
evolve at record speed, MovinCool spot air
conditioners are keeping pace. Delivering
cooling solutions that are more versatile,
more efficient and more cost-effective
than ever before.
To meet our stringent MovinCool qualitycontrol standards, we require that every
unit we sell pass a demanding battery of
performance tests. Then we back each one
with the strongest, most comprehensive
warranty in the industry.
ENTER
Office Pro® 24
C
T
B
A
OFFICE PRO® SERIES
OFFICE PRO®
The Office Pro® is designed to function in today’s
information critical office environments. Its
modern styling allows it to blend with most
interiors yet it offers the same cooling power as
our Classic industrial models. By cooling down
to 65° F, the Office Pro® Series is ideal for cooling
electronic equipment.
With programmable electronic temperature
control, the Office Pro® is affordable insurance
when the fixed air conditioning system is no
longer sufficient or completely fails. The Office
Pro® cools people and electronic equipment
instantly, quietly, and efficiently.
For spaces where hot air cannot be exhausted, we
now offer a 1.5 ton, 115V water-cooled model.
Key Features
n Air or Water-Cooled Models Available
n 24/7 Programmable Operating Modes
n Digital Temperature Control
n Provides Cooling in the Mid-60’s ° F
n No Costly Installation Necessary
Where It’s Used
n Server & Telecom Rooms
n Hospitals
n Laboratories
n Offices
n Schools
n Banks
n Emergency Back-up
n Supplemental Cooling
n After-hours Cooling
MOVINCOOL OFFICE PRO® SERIES
|
1
| OFFICE PRO® SERIES
MovinCool Technical Specifications
Office Pro® 12
Office Pro® 18
Electronic Features
Control
Programmable
Programmable
Cooling Capacity
Rating conditions: 95° F at 60% RH
12,000 Btu/h
16,800 Btu/h
Voltage Requirement
1 Phase, 115V
1 Phase, 115V
1.3 kW
1.7 kW
Current Consumption
11.9 amps
15.6 amps
Recommended Fuse Size
15 amps
20 amps
NEMA Plug Configuration
5 – 15
5 – 20
105 – 125
105 – 125
0.14/0.08 kW
0.24/0.17 kW
Fan Type
Centrifugal
Centrifugal
Max. Air Flow – high/low
410/380 CFM
540/500 CFM
Max. External Static Pressure
0.31 IWG
0.31 IWG
Fan Type
Centrifugal
Centrifugal
820/715 CFM
770/710 CFM
0.16 IWG
0.23 IWG
Hermetic Rotary
Hermetic Rotary
Output
0.9 kW
1.16 kW
Refrigerant
Type
R-410A
R-410A
Dimensions
WxDxH
21 x 27 x 44 in
21 x 27 x 44 in
151/182 lb
170/201 lb
Gauge
14 AWG (3-core)
12 AWG (3-core)
Length
10 ft
10 ft
5 gal
5 gal
65° – 95° F
65° – 95° F
Total Power Consumption
Electrical
Characteristics
Min. – Max. Voltage
Fans
Evaporator
Condenser
Motor Output – high/low
Max. Air Flow – high/low
Max. External Static Pressure
Compressor
Type
Net Weight/Shipping Weight
Power Cord
Condensate Tank Capacity
Operating Conditions
Min. – Max. (@ 50% RH)
Max. Equivalent
Duct Length
Per Cold Duct Hose
30 ft
25 ft
Hot Duct Hose
60 ft
100 ft
With Condenser Duct – high/low
52/50 dB(A)
61/59 dB(A)
Without Condenser Duct – high/low
55/53 dB(A)
62/60 dB(A)
Max. Sound Level
All specifications subject to change without notice. Standard warranty includes 12 months on entire unit and compressor. Visit www.MovinCool.com/reg for details on MovinCool’s
industry-best free Extended Warranty Program which includes 3 years for portable models and 2 years for ceiling-mount models for both parts and labor on units. All models
feature compressor overload relay and fan motor protection. All models also feature compressor short-cycle pro­­tection, return air thermostat, automatic restart and accommodate a
condensate pump kit. All models are 50 Hertz (Hz) compatible with a slight performance decrease from specifications listed above (except CM25 and CMW30).
2
|
MOVINCOOL OFFICE PRO® SERIES
OFFICE PRO®
Water-Cooled
Office Pro® W20
Office Pro® 24*
Office Pro® 36*
Office Pro® 60*
Office Pro® 63
Programmable
Programmable
Programmable
Programmable
Programmable
15,700 Btu/h (1)
24,000 Btu/h
36,000 Btu/h
60,000 Btu/h
60,000 Btu/h
1 Phase, 115V
1 Phase, 208/230V
1 Phase, 208/230V
1 Phase, 208/230V
3 Phase, 460V
1.27 kW
2.9 kW
4.3 kW
6.6 kW
6.6 kW
11.7 amps
13.2 amps
19.6 amps
29 amps
9.5 amps
15 amps
20 amps
30 amps
50 amps
20 amps
5 – 15
6 – 20
6 – 30
6 – 50
L16 – 20
105 – 125
198 – 250
198 – 250
198 – 250
440 – 480
0.11/0.08 kW
0.57/0.40 kW
0.21/0.13 kW Evap.
0.5/0.33 kW Evap.
0.5/0.33 kW Evap.
0.33/0.12 kW Cond.
1.2/0.93 kW Cond.
1.2/0.93 kW Cond.
Centrifugal
Centrifugal
Centrifugal
Centrifugal
Centrifugal
565/540 CFM
630/545 CFM
990/825 CFM
1940/1770 CFM
1940/1770 CFM
0.31 IWG
0.5 IWG
0.6 IWG
0.9 IWG
0.9 IWG
Water Cool Condenser
Centrifugal
Centrifugal
Centrifugal
Centrifugal
N/A
870/760 CFM
1490/1060 CFM
2830/2650 CFM
2830/2650 CFM
N/A
0.16 IWG
0.5 IWG
0.85 IWG
0.85 IWG
Hermetic Rotary
Hermetic Rotary
Hermetic Scroll
Hermetic Scroll
Hermetic Scroll
1.16 kW
1.8 kW
2.3 kW
3.9 kW
3.3 kW
R-410A
R-410A
R-410A
R-410A
R-410A
21 x 27 x 41.5 in
21 x 27 x 49 in
30 x 40 x 52 in
30 x 52 x 65 in
30 x 52 x 65 in
178/209 lb
216/253 lb
432/509 lb
623/753 lb
705/835 lb
14 AWG (3-core)
12 AWG (3-core)
12 AWG (3-core)
6 AWG (3-core)
12 AWG (4-core)
10 ft
6 ft
6 ft
6 ft
6 ft
5 gal
5 gal
2 @ 5 gal
Auto Pump Included
Auto Pump Included
65° – 95° F
65° – 95° F
65° – 105° F
65° – 105° F
25 ft
50 ft
40 ft
40 ft
40 ft
N/A
45 ft
60 ft
100 ft
100 ft
N/A
63/61 dB(A)
65/62 dB(A)
69/67 dB(A)
69/67 dB(A)
62/60 dB(A)
65/63 dB(A)
67/66 dB(A)
71/69 dB(A)
71/69 dB(A)
65° – 95° F
40°– 90° F (Condenser water)
* Specification information shown with 230V
(1) Rating Conditions: Air: 80°F at 50% RH / Water (EWT/LWT): 85°F/95°F
MOVINCOOL OFFICE PRO® SERIES
|
3
| OFFICE PRO® SERIES
Spot Cooling Solutions
with MovinCool Accessories
The most common accessory installations are
included in this catalog.
1
Find your MovinCool model category:
Ceiling-Mount, Office Pro®, Classic Plus,
or Classic.
2
Find the application(s) suited to your
specific need.
Order the part number(s) for your specific
MovinCool model.
3
MOVINCOOL OFFICE PRO® SERIES
1
6
PROGRAM
RUN/
STOP
PROGRAMMING
SET
PROG
TANK FULL
12
FAN MODE
HI/LO
COOL MODE
ON/OFF
SET
CLOCK
SET TEMP
ENTER
Office Pro® 24
12
11
13
8
10
9
Individual Part Descriptions
For MovinCool Office Pro® Series
1
Nozzle Adapter Kit
Two-piece metal frame converts airflow from louvers to nozzles or cold air ducts.
Includes mounting screws. (Nozzles and ducts sold separately)
1A
Duct Adapter Kit
(Not shown)
Same as above, but for use with cold air flexible ducts. Includes flange. Use on
Office Pro® 36 or 60/63 only. (Cold air flexible ducts sold separately)
2
Nozzle Kit
5" or 6" diameter white plastic nozzle that extends up to 2’ in length.
Includes flange, mounting screws and trim ring. (Sold individually)
3
Cold Air Flange Kit
5" or 6" diameter white metal flange with wire clamp and mounting screws.
Use with cold air ducts.
4
Cold Air Self-Supported Duct
5", 6" or 8" adjustable diameter, white polypropylene duct that extends
from 6-½’ to 10’ in length.
Cold Air Flexible Duct
(Not shown)
8" diameter wire-reinforced, accordion-style duct in 25’ lengths.
(For Office Pro® 36 & 60/63 only)
5
Trim Ring
5" or 6" diameter black end-cap for cold air self-supported duct.
6
Warm Air Self-Supported Duct
12" diameter white, polypropylene plastic duct that extends 6-½’ to 10’ in
length. (N/A for Office Pro® 36 exhaust and entire Office Pro® 60/63)
7
Ceiling Tile
24" x 24" white tile with 12" hole for warm air self-supported duct.
(24" x 24" sheet metal tile with 16" hole and built-in flange and tie-strap for
Office Pro® 36 exhaust and entire Office Pro® 60/63)
8
Condenser Air Plenum
White plastic plenum for return air to condenser. Hinged for filter cleaning.
9
Condensate Pump Kit
110V or 220V pump kit includes 3/8" diameter x 20’ length clear vinyl hose
and installation hardware.
Condensate Tank
Drain tank storage for condensation. Requires condensate float, sold separately.
(For Office Pro® 60/63 only)
Condensate Float (Not shown)
Controls water level in condensate tanks. (For Office Pro® 60/63 only)
11
Evaporator Air Plenum
White plastic plenum for return air to evaporator. (For Office Pro® 60/63 only)
12
Warm Air Flexible Duct Kit
12" diameter wire-reinforced, accordion-style duct in 10’ lengths for condenser
exhaust. Includes clamp. Duct is 16" in diameter and 25’ in length for Office Pro®
36 exhaust and entire Office Pro® 60/63 only.
13
Hose Kit
Two 25’ hoses for condenser water supply and return.
(For Office Pro® W20 only)
4A
10A
|
12
3
2
10
4
6
5
The all-in-one design of MovinCool air
conditioners make them the ideal cooling solution
for virtually any heat-related problem. Using
the optional accessories not only gives you the
ability to customize the cooling application, but
also makes the unit work more efficiently. In
this catalog, we’ve grouped the accessories into
the most common applications such as cooling
multiple areas with one unit, automatically
removing condensation and removing condenser
heat. The possibilities are endless. And with
genuine MovinCool accessories, you are assured of
quality parts engineered and designed specifically
to gain optimum performance from your
MovinCool spot air conditioner.
How to Select
MovinCool Accessories
7
4
/
OFFICE PRO®
Accessories
Auto Condensate Removal
Why bother with emptying the drain tank when you can install a condensate pump to remove the water automatically? This pump has a 17-foot lift capacity
to reach virtually any remote drain.
# Part Name
Office Pro® 12 & 18 Office Pro® W20 Office Pro® 24
Office Pro® 36
Office Pro® 60 & 63
9 Condensate Pump Kit
LA484789-0080
LA484789-0080 LA484789-0090
LA484789-0090
Included
Included
Included
Included
Included
484730-0010
N/A
N/A
N/A
Included
484460-0010
10 Condensate Tank
10A
Condensate Float (Not shown) (a)
Condenser Heat Removal
MovinCool makes removing exhaust easy. For air-cooled models, simply replace the existing ceiling tile with the MovinCool ceiling tile accessory. Place the
self-supported or flexible duct on top of the unit and insert it into the ceiling tile. For water-cooled models, simply connect water supply and return with
hose kit. That’s all it takes.
# Part Name
6
12
7
13
Warm Air Self-Supported Duct
Warm Air Flexible Duct Kit
Ceiling Tile (b)
Hose Kit
Office Pro® 12 & 18 Office Pro® W20 Office Pro® 24
Office Pro® 36
Office Pro® 60 & 63
481744-0060
LAY45771-0060 (i)
LA146373-8280
N/A
N/A
LAY45820-0010
GX484410-8940
N/A
N/A
LAY45820-0010
GX484410-8940
N/A
N/A
N/A
N/A
GX484009-0920
481744-0060
LAY45771-0060 (i)
LA146373-8280
N/A
Condenser Air Intake
When balanced airflow is required, attach the air plenum with a duct from the side of the unit to an outside air source. The air to the condenser is pulled
from outside the room to eliminate problems associated with negative air pressure.
# Part Name
Office Pro® 12 & 18 Office Pro® W20 Office Pro® 24
6 Warm Air Self-Supported Duct
481744-0060
Office Pro® 36
Office Pro® 60 & 63
N/A
481744-0060
481744-0060
N/A
LAY45771-0060 (j)
N/A
LAY45771-0060 (j)
LAY45771-0060 (j)
LAY45820-0010
7 Ceiling Tile (h)
LA146373-8280
N/A
LA146373-8280
LA146373-8280
GX484410-8940
8 Condenser Air Plenum
LAY84270-008A (b)
N/A
LAY84270-005A (b)
LAY84270-0020 (b)
LAY84270-0060 (f)
12 Warm Air Flexible Duct Kit
Spot or Remote Cooling
To use the Office Pro® to spot cool specific areas, use the nozzle adapter in place of the standard louvers. Attach cold air ducts to the adapter to cool remote
hot spots. Trim rings give a finished look and keep the ducts from unraveling. To improve efficiency, use the evaporator air plenum to recirculate cool air.
# Part Name
1
1A
2
3
Nozzle Adapter Kit
Duct Adapter Kit
Nozzle Kit*(c)
Cold Air Flange Kit*(c)
Office Pro® 12 & 18 Office Pro® W20 Office Pro® 24
Office Pro® 36
Office Pro® 60 & 63
LA481769-0170
N/A
LAY84209-0030
481170-0180
LAY45770-0070 (6") (k)
LAY45770-0070 (6") (k)
LAY45770-0080 (8") (l)
484209-0050 (6")
481170-0250 (6")
481744-0030 (6")
LAY45810-0080 (8") (g)
LAY45810-0030 (8")
481851-0210 (6")
LAY84270-0070
4 Cold Air Self-Supported Duct* (d) 481744-0090
Cold Air Flexible Duct* (g)
4A
5 Trim Ring (e)
11 Evaporator Air Plenum (f)
(a) #10 is required.
(b) #6 or 12 is required.
(c) #1 is required.
(d) #1 & 3 are required.
N/A
481851-0200
N/A
LA481769-0170
N/A
LAY84209-0030
481170-0180
LAY84209-0010
N/A
484209-0050
481170-0250
481744-0090
481744-0030
N/A
481851-0200
N/A
N/A
481851-0210
N/A
(e) #1, 3 & 4 are required.
(f) #12 is required for Office Pro® 60/63 only.
(g) #1A is required for Office Pro® 36 & 60/63 only.
(h) #6 & 8 are required.
LAY45770-0080 (8") (l)
484209-0050 (6")
481170-0250 (6")
481744-0030 (6")
LAY45810-0080 (8") (g)
LAY45810-0030 (8")
481851-0210 (6")
N/A
(i) If using with #7, part #481170-0190 is required.
(j) If using with #7, part #481170-0190 & #8 are required.
(k) Requires 4 nozzles or 4 flange kits and ducts.
(l) #4 or 4A is required.
NOTE: All part numbers come with one part except where noted. All kits include additional pieces such as clamps and screws.
See parts description box for more information.
* Order 1 or 2 parts depending if 1 or 2 nozzles, flanges or ducts are needed.
MOVINCOOL OFFICE PRO® SERIES
|
5
CLASSIC PLUS SERIES
E.980
E.980
T.17
C
D
B
A
T
T
1398
2066
PROGRAM
RUN/
STOP
PROGRAMMING
SET
PROG
TANK FULL
FAN MODE
HI/LO
COOL MODE
SET
CLOCK
SET TEMP
ON/OFF
ENTER
Classic Plus 26
The Classic Plus Series cools down harsh
industrial, warehouse environments just like
its predecessor, the original MovinCool Classic.
But, unlike the Classic Series, the Classic Plus
offers the added advantage of programmable
temperature control and a wider range of
operating temperatures. The Classic Plus also
requires little or no installation, making these
versatile models ready to bring instant cooling
relief to the hottest spots. Simply roll it in, plug
it in and turn it on!
Key Features
n 24/7 Programmable Operating Modes
Z3452
n Digital Temperature Control
n Two-Speed Fan
n Handles Temperatures up to 113° F
n Adjustable Nozzles to Direct Cooling on
Critical Hot Spots
6
|
MOVINCOOL CLASSIC PLUS SERIES
Where It’s Used
n Warehouses
n Assembly Lines
n Manufacturing Plants
n Process Cooling
n Moisture Removal
n Outdoors and Events
MovinCool Technical Specifications
­­­Classic 10
Classic Plus 14
Classic Plus 26*
Digital
Programmable
Programmable
Control
Cooling Capacity
Rating conditions: 95°F at 60% RH
10,000 Btu/h
13,200 Btu/h
24,000 Btu/h
Voltage Requirement
1 Phase, 115V
1 Phase, 115V
1 Phase, 208/230V
Total Power Consumption
1.1 kW
1.3 kW
2.4 kW
Current Consumption
10 amps
11.9 amps
10.8 amps
Recommended Fuse Size
15 amps
15 amps
20 amps
NEMA Plug Configuration
5-15
5-15
6-20
105 – 125
105 – 125
198 – 250
0.15 kW
0.24/0.19 kW
0.55/0.38 kW
Centrifugal
Centrifugal
Centrifugal
Max. Air Flow – high/low
265 CFM
440/380 CFM
708/600 CFM
Max. External Static Pressure
0.33 IWG
0.31 IWG
0.42 IWG
Fan Type
Centrifugal
Centrifugal
Centrifugal
Max. Air Flow – high/low
740 CFM
880/760 CFM
1250/1190 CFM
Max. External Static Pressure
0.13 IWG
0.19 IWG
0.25 IWG
Hermetic Rotary
Hermetic Rotary
Hermetic Scroll
Output
0.7 kW
0.9 kW
1.5 kW
Refrigerant
Type
R-410A
R-410A
R-410A
Dimensions
WxDxH
19 x 26 x 41 in
19 x 26 x 41 in
19 x 29 x 47 in
156/194 lb
166/197 lb
199/270 lb
Gauge
14 AWG (3-core)
14 AWG (3-core)
12 AWG (3-core)
Length
10 ft
10 ft
6 ft
5 gal
5 gal
5 gal
70° – 105°F
70° – 113°F
70° – 113°F
Electrical
Characteristics
Min. – Max. Voltage
Fans
Motor Output – high/low
Fan Type
Evaporator
Condenser
Compressor
Type
Net Weight/Shipping Weight
Power Cord
Condensate Tank Capacity
Operating Conditions
Min. – Max. (@ 50% RH)
Max. Equivalent
Duct Length
Per Cold Duct Hose
40 ft
30 ft
60 ft
Hot Duct Hose
60 ft
60 ft
45 ft
With Condenser Duct – high/low
55 dB(A)
57/55 dB(A)
66/64 dB(A)
Without Condenser Duct – high/low
58 dB(A)
60/58 dB(A)
69/67 dB(A)
Max. Sound Level
All specifications subject to change without notice. Standard warranty includes 12 months on entire unit and compressor. Visit www.MovinCool.com/reg for details on
MovinCool’s industry-best free Extended Warranty Program which includes 3 years for portable models and 2 years for ceiling-mount models for both parts and labor on units.
All models feature compressor overload relay and fan motor protection. All models also feature compressor short-cycle pro­­tection, return air thermostat, automatic restart and
accommodate a condensate pump kit. All models are 50 Hertz (Hz) compatible with a slight performance decrease from specifications listed above (except CM25 and CMW30).
CLASSIC PLUS
Electronic Features
* Specification information shown with 230V
MOVINCOOL CLASSIC PLUS SERIES
|
7
| CLASSIC PLUS SERIES
Accessories
/
Auto Condensate Removal
Why bother with emptying the drain tank when you can install a condensate pump to remove the water automatically? This pump has a 17-ft. lift capacity
to reach virtually any remote drain. With the condensate pump installed, drainage is automatic and access to the compartment is no longer necessary.
A cover plate can then be added to conceal and protect the pump.
# Part Name
9 Cover Plate
10 Condensate Pump Kit
Classic 10
Classic Plus 14
Classic Plus 26
484009-0480
LA484789-0121
484009-0480
LA484789-0080
484009-0480
LA484789-0090
Condenser Air Removal
To exhaust the warm condenser air above the work area, attach the warm air flange and duct to the top of the unit. When using MovinCool inside an office,
simply replace the ceiling tile with the MovinCool ceiling tile and insert the duct to exhaust the warm air.
No special tools or equipment are required for the installation.
# Part Name
Classic 10
Classic Plus 14
Classic Plus 26
5 Warm Air Flange Kit
481170-0191
481170-0191
481170-0191
481744-0060
LA146373-8280
LAY45771-0060
481744-0060
LA146373-8280
LAY45771-0060
481744-0060
LA146373-8280
LAY45771-0060
6 Warm Air Duct (a)
7 Ceiling Tile (b)
11 Warm Air Flexible Duct Kit (g)
Condenser Air Intake
When balanced air flow is required, attach the air plenum with a duct from the side of the unit to an outside air source. The air to the condenser is pulled
from outside the room to eliminate problems associated with negative air pressure.
# Part Name
Classic 10
Classic Plus 14
Classic Plus 26
6 Air Duct (c)
7 Ceiling Tile (d)
481744-0060
LA146373-8280
481744-0060
LA146373-8280
481744-0060
LA146373-8280
8 Air Plenum
LAY84270-0040
LAY84270-0020
LAY84270-0030
LAY45771-0060
LAY45771-0060
LAY45771-0060
11
Warm Air Flexible Duct Kit (h)
Remote Cooling
The amount of air supplied to remote areas can be quickly and conveniently increased by attaching 10-ft. extension ducts directly over the standard ducts.
For more permanent installations, use the flange and clamp to secure the extension ducts to the unit. Each duct can be extended 30 to 60 feet from the
unit, depending on the model. Add trim rings to the end of the extension ducts to give a finished look and keep the ducts from unraveling. The dual duct
accessory can be used to divide each 5-inch nozzle opening into two 4-inch outlets to multiply your cooling options.
8
|
# Part Name
Classic 10
Classic Plus 14
Classic Plus 26
1
2
3
4
481170-0180
481744-0090
481851-0200
484209-0030
481170-0180
481744-0090
481851-0200
484209-0030
481170-0250
481744-0030
481851-0210
N/A
Cold Air Flange Kit
Extension Duct (e)
Trim Ring (f)
Dual Duct
(a) #5 is required.
(e) #1 is required.
(b) #5 & 6 are required.
(f) #1 & 2 are required.
(c) #8 is required.
(g) If using with #7, two #5s are required.
(d) #6 & 8 are required.
(h) If using with #7, two #5s & one #8 are required.
MOVINCOOL CLASSIC PLUS SERIES
NOTE: All part numbers come with one part
except where noted. All kits include additional
pieces such as clamps and screws. See parts
description box for more information.
2
7
6
3
6
11
4
11
5
PROGRAM
RUN/
STOP
PROGRAMMING
SET
PROG
TANK FULL
FAN MODE
HI/LO
COOL MODE
9
CLASSIC PLUS
1
SET
CLOCK
SET TEMP
ON/OFF
ENTER
8
10
Individual Part Descriptions
For MovinCool Classic/Classic Plus Series
1 Cold Air Flange Kit
5" or 6" diameter white metal flange with wire clamp and mounting screws.
2 Cold Air Extension Duct
5" or 6" diameter white plastic duct that extends from 6 ½’ to 10’ in length.
3 Trim Ring
5" or 6" diameter black plastic ring mounts as end caps for extension ducts.
4 Dual Duct
5" diameter white plastic flange with two 4" nozzles that extend to 2’ in length.
5 Warm Air Flange Kit
12" diameter gray metal flange with wire clamp and mounting screws.
6 Warm Air Duct
12"­adjustable diameter white plastic duct that extends from 6 ½’ to 10’ in length.
7 Ceiling Tile
24" x 24" white tile with 12" hole for warm air duct.
8 Air Plenum
White plastic plenum for return air to condenser. Hinged for filter cleaning.
9 Cover Plate
Blue metal plate covers condensate collection area.
10 Condensate Pump Kit
110V or 220V pump kit includes ³⁄₈" diameter x 20’ length hose and installation hardware.
11 Warm Air Flexible Duct Kit
12" diameter, wire-reinforced, accordion-style duct in 10’ lengths for condenser exhaust. Includes clamp.
MOVINCOOL CLASSIC PLUS SERIES
|
9
CLASSIC SERIES
Time tested and proven, the Classic Series has
been cooling the world’s factories, warehouses
and work places for over thirty years. The Classic’s
rugged design and unparalleled reliability
has made it the unit of choice for production
managers, quality engineers and warehouse
operators. With powerful cooling capacities
and many customized options, there is a Classic
model for virtually every cooling need.
Key Features
n Digital Temperature Controls
n Rugged Design for Harsh Environments
n Maintenance-free Operation
n Totally Self-contained
n Customized Spot Cooling Options
n Up to 80 feet of Extension Ducting
to Enable Remote Spot Cooling
n Safety Listed for Outdoor Use
10
|
MOVINCOOL CLASSIC SERIES
Where It’s Used
n Warehouses
n Assembly Lines
n Manufacturing Plants
n Process Cooling
n Moisture Removal
n Outdoors and Events
MovinCool Technical Specifications
Classic 40
Classic 60­
Digital
Digital
Control
Cooling Capacity
Rating conditions: 95° F at 60% RH
39,000 Btu/h
60,000 Btu/h
Voltage Requirement
3 Phase, 220V
3 Phase, 460V
Total Power Consumption
4.2 kW
5.9 kW
Current Consumption
14 amps
8.8 amps
Recommended Fuse Size
25 amps
20 amps
NEMA Plug Configuration
L15-30
N/A
198 – 240
440 – 480
0.75 kW Evap.
0.75 kW Evap.
0.40 kW Cond.
0.40 kW Cond.
Fan Type
Centrifugal
Centrifugal
Max. Air Flow – high/low
1060 CFM
1580 CFM
Max. External Static Pressure
1.73 IWG
1.35 IWG
Fan Type
Propeller
Propeller
Max. Air Flow – high/low
2650 CFM
3800 CFM
Max. External Static Pressure
0.05 IWG
0.05 IWG
Hermetic Scroll
Hermetic Scroll
Output
2.3 kW
3.89 kW
Refrigerant
Type
R-410A
R-410A
Dimensions
WxDxH
26 x 44 x 38 in
32 x 49 x 42 in
344/396 lb
474/566 lb
Gauge
12 AWG (4-core)
N/A
Length
6 ft
N/A
2 @ 5 gal (Optional)
N/A
75° – 115° F
75° – 115°F
Electrical
Characteristics
Min. – Max. Voltage
Motor Output – high/low
Fans
Evaporator
Condenser
Type
Compressor
Net Weight/Shipping Weight
Power Cord
Condensate Tank Capacity
Operating Conditions
Min. – Max. (@ 50% RH)
Max. Equivalent
Duct Length
Per Cold Duct Hose
Varies
Varies
Hot Duct Hose
40 ft
40 ft
With Condenser Duct – high/low
N/A
N/A
72 dB(A)
72 dB(A)
Max. Sound Level
Without Condenser Duct – high/low
CLASSIC
Electronic Features
All specifications subject to change without notice. Standard warranty includes 12 months on entire unit and compressor. Visit www.MovinCool.com/reg for details on
MovinCool’s industry-best free Extended Warranty Program which includes 3 years for portable models and 2 years for ceiling-mount models for both parts and labor on units.
All models feature compressor overload relay and fan motor protection. All models also feature compressor short-cycle pro­­tection, return air thermostat, automatic restart and
accommodate a condensate pump kit. All models are 50 Hertz (Hz) compatible with a slight performance decrease from specifications listed above (except CM25 and CMW30).
MOVINCOOL CLASSIC SERIES
| 11
| CLASSIC SERIES
Accessories
/
Multiple or Remote Area Cooling
Cooling several hot spots is not a problem with the two- or three-way chamber. Extension ducts in 10-ft. sections can be used to bring cooling to
remote or different locations. Attach trim rings at the end of the extension ducts to give a finished look and keep the ducts from unraveling.
# Part Name
Classic 40
Classic 60
1 Cold Air Flange Kit
481170-0191
481170-0191
2 Chamber Extender
481849-1431 (e)
481849-1431 (f)
481170-0091
481170-0091 (a)
481769-0041
481769-0041 (a)
3A Three-way Chamber (Not shown)
481769-0051
481769-0051 (a)
3B Reducer Flange Kit
2A Chamber Extender Flange Kit*
3 Two-way Chamber
N/A
481170-0151
4
Extension Duct (6-inch) (b)
481744-0030
481744-0030
5
Trim Ring (c)
481851-0210
481851-0210
481744-0060
481744-0060
6 Extension Duct (12-inch) (d)
Remote Control
When the unit is installed in a remote location, such as outdoors or overhead, use the remote control to allow convenient access to controls.
Part 10A is a weekday & weekend programmable digital millivolt thermostat. For part 10B, the kit includes the operational control, a cover
plate to prevent tampering with controls, and installation hardware. Use six 18AWG plus one ground wire to connect the control to the unit.
(wire not included)
10A
# Part Name
Classic 40
Classic 60
10A Wall Thermostat (For models manufactured after 2008)
LA484500-3430
LA484500-3430
10B Remote Control Kit (For models manufactured up thru 2008)
484500-0431
484500-0431
10B
Portability
To allow portability of these high-capacity MovinCool units, use the caster kit or the wagon kit. The stand kit provides proper ground clearance for
permanent exterior installations.
# Part Name
Classic 40
Classic 60
7 Stand Kit
484750-0021
N/A
8 Wagon Kit
484710-0022
N/A
9 Caster Kit
484709-0011
(a) #3B is required for Classic 60 only.
(b) #3 is required (order 2 or 3 ducts depending
on chamber selected).
(c) #3 & 4 are required.
(d) #1 is required.
(e) #2A is required.
(f) #2A & 3B are required for Classic 60 only.
* Must order quantity of 2 per each Chamber Extender used.
12
|
MOVINCOOL CLASSIC SERIES
484709-0020
NOTE: All part numbers come with one part except
where noted. All kits include additional pieces such
as clamps and screws. See parts description box for
more information.
5
4
4
3
6
10B
2
1
TIME
10A
PRGM
RUN
HOLD
FAN
SYSTEM
ON AUTO COOL
OFF HEAT
9
8
7
CLASSIC
Individual Part Descriptions for MovinCool Classic 40/Classic 60
1 Cold Air Flange Kit
12" diameter gray metal flange with wire clamp and mounting screws.
2 Chamber Extender
Gray metal cylinder raises exhaust air chamber 16" above unit.
2A Chamber Extender Flange Kit
3 Two-way Chamber
Gray metal flange connects chamber extender to unit. (Not shown)
Insulated gray plastic chamber diverts airflow in two directions. Use 6" extension ducts.
3A Three-way Chamber (Not shown)
Diverts airflow in three directions. Use 6" extension ducts.
3B Reducer Flange Kit (Not shown)
Gray metal flange converts mounting holes on Classic 60 for two- or three-way chamber and chamber extender flange.
4 Extension Duct
6" adjustable diameter white plastic duct that extends from 6 1⁄2’ to 10’ in length.
5 Trim Ring
6" diameter black plastic end cap for extension duct.
6 Extension Duct
12" adjustable diameter white plastic duct that extends from 6 1⁄2’ to 10’ in length.
7 Stand Kit
Blue metal, tubular frame raises unit off the ground. (Available for Classic 40 only)
8 Wagon Kit
Blue metal, tubular frame with four casters, drain spout assembly and two 5-gal. condensate tanks.
(Available for Classic 40 only)
9 Caster Kit
Four casters and wrench.
10A Remote Control Kit
Weekday and weekend programmable digital millivolt thermostat.
10B Remote Control Kit
Kit includes remote control box and installation hardware. Use six 18AWG plus one ground wire. (Wire not included)
MOVINCOOL CLASSIC SERIES
| 13
CEILING-MOUNT SERIES
09.510
56.389
The latest addition to the award-winning
MovinCool line of spot coolers is the CM Series
of ceiling-mount packaged air conditioners,
including the air-cooled CM12 and CM25 models,
as well as the new CMW30 water-cooled model.
01.022
03.658
A
C
B
POWER
Featuring the shortest top-to-bottom profile
in the industry, the CM Series fits into virtually
any drop ceiling, making it the perfect cooling
solution for server rooms, which have limited
floor space.
CM12 Key Features
n 10,500 Btu/h at 80°F 50% RH
(Evaporator), 95°F 50% RH (Condenser)
n 13,000 Btu/h at 95°F 60% RH
n 115V, 15 amps – no special electric
required
n No floor space needed
n Can fit into tight ceiling spaces
CM25 Key Features
n 25,000 Btu/h at 80°F 50% RH
(Evaporator), 95°F 50% RH (Condenser)
n High sensible cooling at 18,900 Btu/h
* N/A for CMW30 model
n Environmentally-friendly design –
14 SEER, variable-speed compressor,
R-410A refrigerant & RoHS compliant
n Compact, self-contained unit is easy
to install
n Wall mount controller offers advanced
programmability and settings
Connects to
Building Control
System
Wall Mount
Controller
CMW30 Key Features
n 29,400 Btu/h total cooling capacity
n 22,000 Btu/h sensible cooling for
computer rooms
n Environmentally friendly design –
17 IEER, R-410A refrigerant and
RoHS compliant
n Low-cost installation using standard
off-the-shelf hardware
n Wide condenser EWT range –
45°F to 115°F
Where It’s Used
* CM25 and CMW30 only
** CM25 only
Built-in
Condensate Pump
14
|
MOVINCOOL CEILING-MOUNT SERIES
n Server Rooms
n Telecom Closets
n Off-season Spot Cooling
n Overhead Spot Cooling
n Supplemental Cooling
n Hotels n Anywhere space is limited
Water-Cooled
MovinCool Technical Specifications
Electronic Features
Electrical Characteristics
CM12
CM25*
CMW30*
Millivolt Thermostat (Not included)
Wall Mounted Controller
Wall Mounted Controller
Electronic
Programmable
Programmable
Voltage Requirement
115V, 1 Phase, 60 Hz
208/230V, 1 Phase, 60 Hz
208/230V, 1 Phase, 60 Hz
Min. – Max. Voltage
105 – 125
198 – 250
198 – 250
Recommended Fuse Size
15 amps
20 amps
20 amps
Operation
Control
Cooling Capacity and Power Consumption
Evaporator: 80° F, 50% RH
Total Cooling Capacity
10,500 Btu/h (1)
25,000 Btu/h (2)
29,400 Btu/h (2)
Condenser: 95° F, 50% RH
Sensible Cooling Capacity
7,200 Btu/h (1)
18,000 Btu/h (2)
20,800 Btu/h (2)
Water-cooled model:
Power Consumption
1.23 kW (1)
2.90 kW (2)
1.99 kW (2)
EWT/LWT: 85° F/ 95° F
Current Consumption
11.2 amps (1)
12.6 amps (2)
8.9 amps (2)
Evaporator: 72° F, 50% RH
Total Cooling Capacity
9,300 Btu/h (1)
25,000 Btu/h (2)
25,200 Btu/h (2)
Condenser: 95° F, 50% RH
Sensible Cooling Capacity
7,000 Btu/h (1)
18,900 Btu/h (2)
22,000 Btu/h (2)
Water-cooled model:
Power Consumption
1.22 kW (1)
3.20 kW (2)
2.00 kW (2)
EWT/LWT: 85° F/ 95° F
Current Consumption
11 amps (1)
15 amps (2)
9 amps (2)
Fan Type
Centrifugal
Centrifugal
Centrifugal
324/228 CFM (1)
950/800 CFM (2)
1060/840 CFM (2)
Evaporator
Max. Air Flow - high/low
Condenser
Max. External Static Pressure
0.16 IWG
0.60 IWG
0.66 IWG
Fan Type
Centrifugal
Centrifugal
Water Cooled Condenser
700/370 CFM
1,600/1,300 CFM
N/A
0.12 IWG
0.50 IWG
N/A
Max. Air Flow – high/low
Max. External Static Pressure
Type
Hermetic Rotary
Hermetic Swing Inverter
Hermetic Swing Inverter
Refrigerant
Type
R-410A
R-410A
R-410A
W x D x H (Without flange)
32 x 20 x 15.2 in
53 × 32 × 20 in
45 × 32 × 20 in
W x D x H (With flange)
35 x 23 x 16 in
57 x 36 x 20 in
49 x 35 x 20 in
123/137 lbs
310/353 lbs
236/271 lbs
5 gal/h
5 gal/h
5 gal/h
4 ft
4 ft
4 ft
Evaporator
65° – 95° F, 50% RH
60°F – 95° F, 50% RH
55°F – 95° F, 50% RH
Condenser
65° – 113° F
50°F – 113° F
45°F – 115° F (Condenser water)
Cold Duct Hose
20 ft (3)
120 ft (3)
120 ft (3)
Hot Duct Hose
10 ft (3)
90 ft (3)
N/A
Under Ceiling Tile with
Evaporator Duct
52 dB(A)
55 dB(A)
55 dB(A)
Dimensions
Net Weight/Shipping Weight
Condensate Pump Capacity
Pump Rate
(Internal pump included)
Head
Operating Conditions
Max. Duct Length
Max. Sound Level
CEILING-MOUNT
Compressor
All specifications subject to change without notice. Standard warranty includes 12 months on entire unit and compressor. Visit www.MovinCool.com/reg for details on MovinCool’s industry-best free Extended
Warranty Program which includes 3 years for portable models and 2 years for ceiling-mount models for both parts and labor on units. All models feature compressor overload relay and fan motor protection.
All models also feature compressor short-cycle pro­­tection, return air thermostat, automatic restart and accommodate a condensate pump kit. All models are 50 Hertz (Hz) compatible with a slight performance
decrease from specifications listed above (except CM25 and CMW30).
(1) Measured with two 6 ft ducts with one 90° bend each, supply grill and
return grill with filter (0.16 IWG external static pressure) (ducts not included)
(2) Measured with two 20 ft ducts with one 90° bend each, supply grill and
return grill with filter (0.30 IWG external static pressure) (ducts not included)
(3) Confirm pressure drop of duct, grills and filter with manufacturer specifications
* Specification information shown with 230V
MOVINCOOL CEILING-MOUNT SERIES
| 15
| CEILING-MOUNT SERIES
Accessories
/
Condenser Air Removal
If removing the exhaust is needed, MovinCool makes it easy. The flange can be used to attach a 10-inch (CM12) or 12-inch
(CM25) diameter duct for more air exhaust options (duct not included).
# Part Name
CM12
CM25
CMW30
1 Exhaust Air Flange
481170-0440
481170-0191
N/A
Condenser Air Intake
The air plenum can be used to prevent negative air pressure in the ceiling space when using the exhaust air-flange and duct to
remove exhaust from the ceiling space. Simply attach a 10-inch (CM12) or 14-inch (CM25) diameter duct to the air plenum to
bring in air from outside of the ceiling space (duct not included).
# Part Name
CM12
CM25
CMW30
2 Condenser Intake Air Plenum
481769-0221
481769-0240
N/A
N/A
484409-0130
N/A
2A Condenser Filter Kit (Not shown)
Wall Thermostat
Weekday and weekend programmable digital millivolt thermostat.
# Part Name
CM12
CM25
CMW30
3 Wall Thermostat
LA484500-3430
Included*
Included*
* Wall Mounted Controller with LCD Display
Auto Condensate Removal
Condensate pump with 4-foot lift capacity is included with all the units. If more than 4-foot lift capacity is needed, simply use
this optional condensate pump kit to boost lift capacity to 17-feet.
# Part Name
CM12
CM25
CMW30
4 Condensate Pump Kit
N/A
GX484789-0180
GX484789-0190
TESTIMONIALS
Nick Best
Director, Cam Op & Editor, New Creation Video Productions
“For an office, especially on a corner with windows facing the
sun and equipment which give off heat, the MovinCool CM25 is
definitely the way to go.”
16
|
MOVINCOOL CEILING-MOUNT SERIES
2
1
3
TIME PRGM
RUN
HOLD
FAN
SYSTEM
ON AUTO COOL OFF HEAT
4
Individual Part Descriptions for MovinCool Ceiling-Mount Series
1 Exhaust Air Flange
10" or 12" diameter gray metal flange with mounting screws.
2 Condenser Intake Air Plenum
Gray metal plenum with 10" or 14" diameter return air flange. Includes mounting screws.
2A Condenser Filter Kit (Not shown)
Optional filter kit for condenser air intake for use in heavily dusty environments.
3 Wall Thermostat
Weekday & weekend programmable digital millivolt thermostat.
4 Condensate Pump Kit
230V pump kit to boost lift capacity to 17-feet. Includes installation hardware.
Joe Dotson
Service Account Manager, Scarborough Mechanical Services, Inc.
MOVINCOOL CEILING-MOUNT SERIES
CEILING-MOUNT
“The health-care center has no more shutdowns due to overheating.
The CM12 is perfectly designed for this type of application. It has the
usual MovinCool quality, it’s easy to install in tight spaces, and it has
an affordable price tag.”
| 17
What Our Customers Are Saying...
/
Eric Rieger
Matt Steding
Eric Garvin
President, WEBIT Services
Division Maintenance Manager, Allina Hospitals and Clinics
Manufacturing Engineer, AUTECS
“After three failed retail A/C units from a local big
box store, I was recommended an Office Pro® 12.
Its performance and reliability are impressive, and
the peace of mind it delivers is priceless. For mission
critical needs of server and telecom rooms, you can’t
beat MovinCool.”
“The flexibility of the CM25’s control options made
it very easy for us to integrate the unit into our
automation system. The EMS lets us build the
control logic to remotely monitor, schedule, trend
and alarm the points we want, so we have greater
control over the unit.”
“I used a Classic Plus 26 and decreased the company’s
HFMS automotive airflow sensor components’ cooldown time from 30 minutes to 96 seconds—a
94% reduction. This improved our production time
and reduced handling damage and manpower
requirements.”
Water-Cooled
©2014 DENSO PRODUCTS AND SERVICES AMERICAS, INC.
MovinCool, SpotCool and Office Pro® are registered trademarks of DENSO Corporation.
A DENSO branded product
800-264-9573
www.MovinCool.com
DENSO PRODUCTS AND SERVICES AMERICAS, INC.
3900 Via Oro Ave
Long Beach, CA 90810
D1773.334
360-0114 -CAT
Download PDF

advertising