U-Line U3018RGLS01A, U3024RGLS00A, U3024RS00A Quick start guide

U-Line U3018RGLS01A, U3024RGLS00A, U3024RS00A Quick start guide
QUICK START GUIDE
Modular 3000 Series
•
115 V / 60 Hz
QUICK START GUIDE
u-line.com
WELCOME TO U-LINE
Congratulations on your U-Line purchase. Your product comes from a company with over five decades and three generations
of premium modular ice making, refrigeration, and wine preservation experience. U-Line continues to be the American
leader, delivering versatility and flexibility for multiple applications including residential, light commercial, outdoor and marine
use. U-Line’s complete product collection includes modular Wine Captain® Models, Beverage Centers, Clear Ice Machines,
Crescent Ice Makers, Glass & Solid Door Refrigerators, Drawer Models, Freezers, and Combo® Models.
U-Line has captivated those with an appreciation for the finer things with exceptional functionality, style, inspired innovations
and attention to even the smallest details. We are known and respected for our unwavering dedication to product design,
quality and selection. U-Line is headquartered in Milwaukee, Wisconsin with a west coast office located in Laguna Beach,
California and European support in Dublin, Ireland. U-Line has shipped product to five continents for over two decades and is
proud to have the opportunity to ship to you.
PRODUCT INFORMATION
Looking for additional information on your product? User Guides, Quick Reference Guides, CAD Drawings, Compliance
Documentation, and Product Warranty information are all available for reference and download at u-line.com under
Documentation.
PROPERTY DAMAGE / INJURY CONCERNS
In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following
steps:
1. U-Line Customer Care must be contacted immediately at +1.800.779.2547.
2. Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been
altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.
SERVICE INFORMATION
Answers to Customer Frequently Asked Questions are available at u-line.com under Customer Care or you may contact our
Customer Care group directly, contact information below.
GENERAL INQUIRIES
SERVICE & PARTS ASSISTANCE
U-Line Corporation
Monday - Friday 8:00 am to 5:30 pm CST
8900 N. 55th Street
T: +1.800.779.2547
Milwaukee, Wisconsin 53223 USA
F: +1.414.354.5696
Monday - Friday 8:00 am to 4:30 pm CST
Service Email: [email protected]
T: +1.414.354.0300
Parts Email: [email protected]
F: +1.414.354.7905
Email: [email protected]
u-line.com
CONNECT WITH US
Designed, engineered and assembled in WI, USA
QUICK START GUIDE
Contents
1
Model List
3
Safety and Warning
3
Environmental Requirements
4
Electrical
5
Door Swing
6
General Installation
6
Integrated Panel Installation
9
Control Quick Guide
10
First Use
10
Sabbath Mode
11
Warranty
u-line.com
QUICK START GUIDE
u-line.com
Model List
This guide provides the basics to get you started. Looking for more information? Visit u-line.com to view detailed User Guides
for all U-Line products.
Wine Captain® Models
U-3018WCS-00A
U-3024ZWCS-00A
U-3036WCWCS-00A
U-3018WCS-01A
U-3024ZWCS-01A
U-3036WCWCS-13A
U-3018WCS-13A
U-3024ZWCS-13A
U-3036WCWCINT-00A
U-3018WCS-15A
U-3024ZWCS-15A
U-3036WCWCINT-60A
U-3018WCINT-00A
U-3024ZWCINT-00A
U-3018WCINT-01A
U-3024ZWCINT-01A
U-3018WCINT-60A
U-3024ZWCINT-60A
U-3018WCINT-61A
U-3024ZWCINT-61A
Beverage Centers
U-3024BEVS-00A
U-3036BVWCS-00A
U-3024BEVS-01A
U-3036BVWCS-13A
U-3024BEVS-13A
U-3036BVWCINT-00A
U-3024BEVS-15A
U-3036BVWCINT-60A
U-3024BEVINT-00A
U-3024BEVINT-01A
U-3024BEVINT-60A
U-3024BEVINT-61A
Glass Door Refrigerators
U-3018RGLS-00A
U-3024RGLS-00A
U-3036RRGLS-00A
U-3018RGLS-01A
U-3024RGLS-01A
U-3036RRGLS-13A
U-3018RGLS-13A
U-3024RGLS-13A
U-3036RRGLINT-00A
U-3018RGLS-15A
U-3024RGLS-15A
U-3018RGLINT-00A
U-3024RGLINT-00A
U-3018RGLINT-01A
U-3024RGLINT-01A
1
QUICK START GUIDE
u-line.com
Solid Door Refrigerators
U-3018RS-00A
U-3024RS-00A
U-3036RRS-00A
U-3018RS-01A
U-3024RS-01A
U-3036RRINT-00A
U-3018RINT-00A
U-3024RINT-00A
U-3018RINT-01A
U-3024RINT-01A
U-3024DWRINT-00A
U-3024DWRS-00A
Freezers
U-3024FZRS-00A
U-3024FZRS-01A
U-3024FZRINT-00A
U-3024FZRINT-01A
Visit http://www.u-line.com/product-literature/userguides or
scan this QR code to view all user guides online.
2
QUICK START GUIDE
u-line.com
Safety and Warning
! DANGER
NOTICE
This unit contains R600a (Isobutane) which is a
Please read all instructions before installing,
flammable hydrocarbon. It is safe for regular
operating, or servicing the appliance.
use. Do not use sharp objects to expedite
defrosting. Do not service without consulting the
“R600a specifications” section included in the
Use this appliance for its intended purpose only and follow
User Guide. Do not damage the refrigerant
these general precautions with those listed throughout this
circuit.
guide:
SAFETY ALERT DEFINITIONS
! WARNING
Throughout this guide are safety items labeled with a
Danger, Warning or Caution based on the risk type:
Service must be done by factory authorized
service personnel. Any parts shall be replaced
with like components. Failure to comply could
! DANGER
increase the risk of possible ignition due to
incorrect parts or improper service..
Danger means that failure to follow this safety
statement will result in severe personal injury or
death.
Environmental Requirements
This model is intended for indoor/interior applications only
! WARNING
and is not to be used in installations that are open/
exposed to natural elements.
Warning means that failure to follow this safety
statement could result in serious personal injury
This unit is designed to operate between 50°F (10°C) and
or death.
100°F (38°C). Higher ambient temperatures may reduce
the unit’s ability to reach low temperatures and/or reduce
ice production on applicable models.
! CAUTION
For best performance, keep the unit out of direct sunlight
Caution means that failure to follow this safety
and away from heat generating equipment.
statement may result in minor or moderate
personal injury, property or equipment damage.
In climates where high humidity and dew points are
present, condensation may appear on outside surfaces.
This is considered normal. The condensation will
evaporate when the humidity drops.
3
QUICK START GUIDE
u-line.com
The unit requires a grounded and polarized 115 VAC,
! CAUTION
60 Hz, 15A power supply (normal household current). An
individual, properly grounded branch circuit or circuit
Damages caused by ambient temperatures of
breaker is recommended. A GFCI (ground fault circuit
40°F (4°C) or below are not covered by the
interrupter) is usually not required for fixed location
warranty.
appliances and is not recommended for your unit because
it could be prone to nuisance tripping. However, be sure
to consult your local codes.
Electrical
! WARNING
SHOCK HAZARD — Electrical Grounding
Required. Never attempt to repair or perform
maintenance on the unit until the electricity has
been disconnected.
Never remove the round grounding prong from
the plug and never use a two-prong grounding
adapter.
Altering, cutting or removing power cord,
removing power plug, or direct wiring can cause
serious injury, fire, loss of property and/or life,
and will void the warranty.
Never use an extension cord to connect power to
the unit.
Always keep your working area dry.
NOTICE
Electrical installation must observe all state and
local codes. This unit requires connection to a
grounded (three-prong), polarized receptacle
that has been placed by a qualified electrician.
4
QUICK START GUIDE
u-line.com
Door Swing
Wall
For Integrated models that are installed adjacent to a wall,
1/4" (6 mm)
1/4" (6 mm) clearance is recommended from wall on
hinge side to allow the door to open 90°. Allow for
additional space for any knobs or pulls installed on the
integrated panel/frame.
Stainless Steel models that are installed adjacent to a wall
require 2-1/4" (57 mm) door clearance on hinge side to
allow for door handle.
Units have a zero clearance when installed adjacent to
90°
Door Swing
cabinets.
Space Required
For any Knobs or Pulls
Integrated
2-1/4" MIN
Wall
(57 mm MIN)
90°
Door Swing
Stainless
5
QUICK START GUIDE
u-line.com
General Installation
INSTALLATION
1. Plug in the power/electrical cord.
1. Use a level to confirm
the unit is level. Level
2. Gently push the unit into position. Be careful not to
should be placed along
top edge and side
entangle the cord or water and drain lines.
1
edge as shown.
3. Re-check the leveling, from front to back and side to
side. Make any necessary adjustments. The unit’s top
2. If the unit is not level,
surface should be approximately 1/8" (3 mm) below
remove grille and
adjust legs as
the countertop.
2
necessary. Use
included tool to adjust the height of the rear legs.
4. Install the anti-tip bracket.
5. Remove the interior packing material and wipe out the
inside of the unit with a clean, water-dampened cloth.
Integrated Panel Installation
1. Fully open door/drawer.
Rotate Front Legs to Adjust
Rotate Clockwise to raise rear leg.
Rotate Counter-Clockwise to lower leg.
2. Starting at corner, pull
gasket away from door/
3. Confirm the unit is level after each adjustment and
drawer.
repeat the previous steps until the unit is level.
3. Continue to pull gasket
INSTALLATION TIP
free from gasket channel.
If the room floor is higher than the floor in the cutout
opening, adjust the rear legs to achieve a total unit rear
height of 1/8" (3 mm) less than the opening’s rear height.
Shorten the unit height in the front by adjusting the front
legs. This allows the unit to be gently tipped into the
opening. Adjust the front legs to level the unit after it is
correctly positioned in the opening.
6
QUICK START GUIDE
u-line.com
6. Secure integrated
4. Upon removal, lay gasket down on a flat surface.
panel to door/
Bar
Clamp
drawer using
clamps. A robust
NOTICE
tape may also be
If the door/drawer houses the display, make
used. U-Line
certain the display cable remains securely
recommends the
seated in the inner door channel, see below.
use of bar clamps
to secure the panel
to the door/drawer.
Display
Inner Door Cable
Channel
Door/Drawer
Wood
Panel
If using tape, be
certain the tape will
not damage panel
finish upon
removal.
Bar
Clamp
7. Using a 7/64"
(3 mm) drill bit,
drill 6 pilot holes
5. The panel should be aligned with the outside edge
into the wood panel
(opposite the hinge, if equipped) and high enough to
1/2" (12 mm) deep using the holes in the door/drawer
align with the highest point in the door/drawer.
frame as a guide.
Align Top Of Panel With Highest Point Of Door/Drawer
NOTICE
It is important to ensure that all drilled holes are
drilled to the correct depth in order to avoid
Align Panel
Against
Door/Drawer
Edge First
splits in the wood when hardwood is installed.
8. Locate 6 of the #6x 1-1/2" (38 mm) screws provided
with your unit.
9. Using a Phillips screwdriver, place one screw into each
NOTICE
of the 6 pilot holes and screw down. Do not overtighten
Due to differences in floor construction or
screws.
surrounding cabinetry, the panel may not sit
flush with the top of the door/drawer.
Panel
Door/Drawer
7
QUICK START GUIDE
u-line.com
10.Be sure the screws force their way past the opening on
the gasket channel and sit flush against the bottom of
the channel.
Integrated Panel
Integrated Panel
11.Remove clamps from door/drawer.
NOTICE
If panel requires additional adjustment after
removing clamps, slightly loosen each screw and
adjust panel as necessary. Tighten screws upon
completion.
Do not overtighten screws, bulges in plastic
frame might be visible if tightened too much.
12.Starting at the corners, re-install the gasket into the
gasket channel in the frame. Make sure the gasket is
fully seated. This may take some force.
8
QUICK START GUIDE
u-line.com
Control Quick Guide
Actual Display: 3018R, 3018RGL and 3024R, 3024RGL,
3024BEV
Actual Display: 3018WC
Up
Up
Select
Select
Beverage
38°F
Red Wine
55°F
Down
Down
Can be displayed in Celsius
Power
U-Select Lighting
Can be displayed in Celsius
Power
U-Select Lighting
Actual Display: 3024DWR
Actual Display: 3024ZWC
Up
Up
Red Wine
55°F
Down
Zone Indicator
Zone Toggle
Zone Indicator
Select
Zone Indicator
Zone Toggle
Zone Indicator
Select
Beverage
38°F
White Wine
5O°F
Down
Can be displayed in Celsius
Power
U-Select Lighting
Market
38°F
Can be displayed in Celsius
Power
U-Select Lighting
Actual Display: 3024FZR
Actual Display: 3036WCWC, 3036BVWC, 3036RR,
Up
3036RRGL
Up
Zone Indicator
Zone Toggle
Zone Indicator
Select
Red Wine
55°F
Down
Select
Polar
0°F
White Wine
5O°F
Down
Can be displayed in Celsius
Power
U-Select Lighting
Can be displayed in Celsius
Power
U-Select Lighting
Control Function Guide:
FUNCTION
COMMAND
DISPLAY/OPTIONS
OFF
Press
and hold
Display will count down from 5 to off
ON
Press
and release
Unit will come on immediately
Adjust mode
Press
to select zone
Press
or
Adjust temperature
Adjust lighting
Light ON/OFF with door
Press
Modes available in table below.
and release to select zone
(dual zone only)
Press
Press
and release to scroll through the modes.
Press
or
and release. When the “F” or “C”
in the display is flashing, press
or
adjust the set point temperature.
to adjust lighting
to have light ON/OFF with door
Press
to select zone
Press
or
Press
and release to scroll through timer
to set low, medium or high
settings. Both zones will default to the same timer
setting.
Customer menu
Press
to
and hold for 5 seconds
Press
9
or
to scroll through menu
QUICK START GUIDE
u-line.com
LL
Mode
Set Point Temperature Range
°F (°C)
°F (°C)
Red Wine
55 (12)
55-65 (12-18)
White Wine
50 (10)
45-55 (7-12)
Sparkling Wine
45 (7)
38-50 (3-10)
Deli
36 (2)
34-40 (1-4)
Beverage/Drinks
38 (3)
34-65 (1-18)
Market/Fresh
38 (3)
34-40 (1-4)
Root
50 (10)
45-55 (7-12)
Pantry
42 (5)
34-70 (1-21)
Polar
0 (-18)
(-5)-5 ([-21]-[-15])
Sabbath Mode
Up
Select
RETURN TO MENU
SABBATH MODE
OFF?
Down
This unit offers a Sabbath mode for users who require this
functionality during Sabbaths. Sabbath mode disables
system responses to user initiated activities and all
external functions, including lighting, display and audible
First Use
alarms. The unit will still maintain internal temperatures
and set points.
All U-Line controls are preset at the factory. Initial startup
requires no adjustments.
To enable Sabbath Mode:
NOTICE
1. Open the unit’s door to activate the display.
U-Line recommends allowing the unit to run
overnight before loading with product.
2. To access the Customer Menu, hold
When plugged in, the unit will begin operating under the
3. Press
factory default setting. Follow the on screen prompt for
or
for 5 seconds.
to scroll through available selections.
language selection and temperature units.
4. Select Sabbath Mode from the Customer Menu by
To turn the unit off, press
pressing
and hold for 5 seconds and
.
release. The display will show a countdown to switching the
unit off.
To power your unit on, simply press
5. Press
and the unit will
6. Press
immediately switch on.
10
to select “Off”.
. “Off” will begin to flash.
QUICK START GUIDE
7. Press
or
u-line.com
transportation charges for replacements under this
to change “Off” to “On”.
warranty and labor costs not specifically covered by
8. Press
this warranty, shall be the responsibility of the
to confirm your selection.
purchaser. This warranty extends only to the original
purchaser of the U-Line product. The Product
The Display will fade out as the unit enters Sabbath Mode.
Registration Card included with the product should be
Sabbath
promptly completed by you and mailed back to U-Line,
or you can register on-line at www.u-lineservice.com.
Mode remains active until
is quickly pressed and
3. The warranty listed above does not apply to floor
released.
display models. The warranty for these models shall
be 30 days from the date of retail purchase and only if
U-Line’s Product Registration Card included with the
Warranty
unit is completed and mailed back or electronically
submitted to U-Line. This 30 day warranty does not
U-LINE CORPORATION LIMITED WARRANTY
apply to cosmetic damages. A proof of purchase may
1. U-Line Corporation (“U-Line”) warrants each U-Line
be required.
product to be free from defects in materials and
workmanship for a period of one year (two years on
4. The following conditions are excluded from this limited
Modular 3000 Series) from the date of purchase.
warranty: use of cleaners other than the recommended
U-Line further warrants the sealed system (consisting
stainless steel cleaners and U-Line Clear Ice Maker
of the compressor, condenser, evaporator, hot gas
cleaner; installation charges; damages caused by
bypass valve, dryer, and connecting tube) in each
disasters or acts of God, such as fire, floods, wind, and
U-Line product to be free from defects in materials and
lightning; damages incurred or resulting from shipping,
workmanship for a period of five years from the date of
improper installation, unauthorized modification, or
purchase.
misuse/abuse of the product; customer education
calls; food loss and spoilage; door and water level
2. During the initial one year warranty period (two years
adjustments (except during the first 30 days from the
on Modular 3000 Series) for all U-Line products U-Line
date of installation); defrosting the product; adjusting
shall: (1) repair any product or replace any part of a
the controls; door reversal; and cleaning the
product; and (2) for all Marine, RV, and Domestic
condenser.
U-Line products sold and serviced in the United States
(including Alaska and Hawaii) and Canada, U-Line
5. U-Line products are designed to operate in ambient
shall be responsible for the labor costs performed by a
temperatures between 50°F and 100°F unless
U-Line authorized service company, incurred in
otherwise noted in the product manual. Exposure to
connection with the replacement of any defective part.
temperatures outside this range may cause
During years two through five of the warranty period
degradation of performance and issues, such as lower
for the sealed system, U-Line shall: (1) at U-Line’s
ice production or spoiled contents, that are not
option repair or replace any part of the sealed system;
covered under the terms of this warranty as a result of
and (2) for all Marine, RV, and Domestic U-Line
that exposure. U-Line product may not be subjected to
products sold and serviced in the United States
temperatures below 40°F without following the
(including Alaska and Hawaii) and Canada, U-Line shall
winterization and vacation shutdown procedures in the
be responsible for the labor costs incurred in
user guide.
connection with the replacement of any defective part
of the sealed system. All other charges, including
11
QUICK START GUIDE
u-line.com
Some states do not allow limitations on how long an
6. U-Line’s Outdoor Limited Warranty, set forth in this
Paragraph 6 shall apply to U-Line models deemed
implied warranty lasts or the exclusion or limitation of
suitable for outdoor use by Underwriters Laboratory
incidental or consequential damages, so the above
(“UL”) as noted in the U-Line Product Catalog, U-Line’s
limitations may not apply to you. This warranty gives you
website, and/or on the serial tag located inside the
specific legal rights, and you may also have other rights
product.
which vary from state to state.
A. Outdoor product may come into contact with rain by
Warranty 6/2014 Rev.G
virtue of outdoor use. Exposure to other sources of
water shall also cause this warranty to be void,
including flooding of the area in proximity of the unit
greater than 1/8" deep in water, hurricanes, splashing
of pool water, or directing a spray from a hose or
similar device into and around the unit.
7. If a product defect is discovered during the applicable
warranty period, you must promptly notify either
U-Line at 8900 N. 55th Street, Milwaukee, Wisconsin
53223 USA or at +1.800.779.2547 or the dealer from
whom you purchased the product. In no event shall
such notification be received later than 30 days after
the expiration of the applicable warranty period. U-Line
may require that defective parts be returned, at your
expense, to U-Line’s factory in Milwaukee, Wisconsin,
for inspection. Any action by you for breach of
warranty must be commenced within one year after
the applicable warranty period.
8. THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR IMPLIED WARRANTY OF
FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH
ARE DISCLAIMED. U-Line’s sole liability, and your
exclusive remedy, under this warranty is set forth in
the paragraphs above. U-Line shall have no liability
whatsoever for any incidental, consequential, or
special damages arising from the sale, use, or
installation of the product or from any other cause
whatsoever, whether based on warranty (express or
implied) or otherwise based on contract, tort, or any
other theory of liability.
Copyright © 2014 U-Line Corporation. All Rights Reserved.
Publication Number 30425 7/2015 Rev.B
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement