QUICK START GUIDE Modular 3000 Series • 115 V / 60 Hz QUICK START GUIDE u-line.com WELCOME TO U-LINE Congratulations on your U-Line purchase. Your product comes from a company with over five decades and three generations of premium modular ice making, refrigeration, and wine preservation experience. U-Line continues to be the American leader, delivering versatility and flexibility for multiple applications including residential, light commercial, outdoor and marine use. U-Line’s complete product collection includes modular Wine Captain® Models, Beverage Centers, Clear Ice Machines, Crescent Ice Makers, Glass & Solid Door Refrigerators, Drawer Models, Freezers, and Combo® Models. U-Line has captivated those with an appreciation for the finer things with exceptional functionality, style, inspired innovations and attention to even the smallest details. We are known and respected for our unwavering dedication to product design, quality and selection. U-Line is headquartered in Milwaukee, Wisconsin with a west coast office located in Laguna Beach, California and European support in Dublin, Ireland. U-Line has shipped product to five continents for over two decades and is proud to have the opportunity to ship to you. PRODUCT INFORMATION Looking for additional information on your product? User Guides, Quick Reference Guides, CAD Drawings, Compliance Documentation, and Product Warranty information are all available for reference and download at u-line.com under Documentation. PROPERTY DAMAGE / INJURY CONCERNS In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following steps: 1. U-Line Customer Care must be contacted immediately at +1.800.779.2547. 2. Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been altered or repaired in the field without prior written approval from U-Line, claims will not be eligible. SERVICE INFORMATION Answers to Customer Frequently Asked Questions are available at u-line.com under Customer Care or you may contact our Customer Care group directly, contact information below. GENERAL INQUIRIES SERVICE & PARTS ASSISTANCE U-Line Corporation Monday - Friday 8:00 am to 5:30 pm CST 8900 N. 55th Street T: +1.800.779.2547 Milwaukee, Wisconsin 53223 USA F: +1.414.354.5696 Monday - Friday 8:00 am to 4:30 pm CST Service Email: [email protected] T: +1.414.354.0300 Parts Email: [email protected] F: +1.414.354.7905 Email: [email protected] u-line.com CONNECT WITH US Designed, engineered and assembled in WI, USA QUICK START GUIDE Contents 1 Model List 3 Safety and Warning 4 Environmental Requirements 4 Electrical 5 Door Swing 6 General Installation 6 Integrated Panel Installation 9 Control Quick Guide 10 First Use 10 Sabbath Mode 11 Warranty u-line.com QUICK START GUIDE u-line.com Model List This guide provides the basics to get you started. Looking for more information? Visit u-line.com to view detailed User Guides for all U-Line products. Wine Captain® Models* U-3018WCS-00B U-3024ZWCS-00B U-3036WCWCS-00B U-3018WCS-13B U-3024ZWCS-13B U-3036WCWCS-13B U-3018WCS-15B U-3024ZWCS-15B U-3036WCWCINT-00B U-3018WCINT-00B U-3024ZWCINT-00B U-3036WCWCINT-60B U-3018WCINT-60B U-3024ZWCINT-60B Beverage Centers* U-3024BEVS-00B U-3036BVWCS-00B U-3024BEVS-13B U-3036BVWCS-13B U-3024BEVS-15B U-3036BVWCINT-00B U-3024BEVINT-00B U-3036BVWCINT-60B U-3024BEVINT-60B U-3024BEVINT-61B Glass Door Refrigerators* U-3018RGLS-00B U-3024RGLS-00B U-3036RRGLS-00B U-3018RGLS-13B U-3024RGLS-13B U-3036RRGLS-13B U-3018RGLS-15B U-3024RGLS-15B U-3036RRGLINT-00B U-3018RGLINT-00B U-3024RGLINT-00B 1 QUICK START GUIDE u-line.com Solid Door Refrigerators* U-3018RS-00B U-3024RS-00B U-3036RRS-00B U-3018RINT-00B U-3024RINT-00B U-3036RRINT-00B Refrigerator Drawers* U-3024DWRINT-00B U-3024DWRS-00B Freezers* U-3024FZRS-00B U-3024FZRINT-00B *Unit shown with wood panel not included with unit. Visit http://www.u-line.com/product-literature/userguides or scan this QR code to view all user guides online. 2 QUICK START GUIDE u-line.com Safety and Warning ! DANGER NOTICE This unit contains R600a (Isobutane) which is a Please read all instructions before installing, flammable hydrocarbon. It is safe for regular operating, or servicing the appliance. use. Do not use sharp objects to expedite defrosting. Do not service without consulting the Use this appliance for its intended purpose only and follow “R600a specifications” section included in the these general precautions with those listed throughout this User Guide. Do not damage the refrigerant guide: circuit. SAFETY ALERT DEFINITIONS ! WARNING Throughout this guide are safety items labeled with a Danger, Warning or Caution based on the risk type: Service must be done by factory authorized service personnel. Any parts shall be replaced with like components. Failure to comply could ! DANGER increase the risk of possible ignition due to incorrect parts or improper service. Danger means that failure to follow this safety statement will result in severe personal injury or death. ! WARNING Warning means that failure to follow this safety statement could result in serious personal injury or death. ! CAUTION Caution means that failure to follow this safety statement may result in minor or moderate personal injury, property or equipment damage. 3 QUICK START GUIDE u-line.com Environmental Requirements Electrical This model is intended for indoor/interior applications only ! WARNING and is not to be used in installations that are open/ exposed to natural elements. SHOCK HAZARD — Electrical Grounding Required. Never attempt to repair or perform This unit is designed to operate between 50°F (10°C) and maintenance on the unit until the electricity has 100°F (38°C). Higher ambient temperatures may reduce been disconnected. the unit’s ability to reach low temperatures and/or reduce ice production on applicable models. Never remove the round grounding prong from the plug and never use a two-prong grounding For best performance, keep the unit out of direct sunlight adapter. and away from heat generating equipment. Altering, cutting or removing power cord, In climates where high humidity and dew points are removing power plug, or direct wiring can cause present, condensation may appear on outside surfaces. serious injury, fire, loss of property and/or life, This is considered normal. The condensation will and will void the warranty. evaporate when the humidity drops. Never use an extension cord to connect power to the unit. ! CAUTION Always keep your working area dry. Damages caused by ambient temperatures of 40°F (4°C) or below are not covered by the warranty. NOTICE Electrical installation must observe all state and local codes. This unit requires connection to a grounded (three-prong), polarized receptacle that has been placed by a qualified electrician. The unit requires a grounded and polarized 115 VAC, 60 Hz, 15A power supply (normal household current). An individual, properly grounded branch circuit or circuit breaker is recommended. A GFCI (ground fault circuit interrupter) is usually not required for fixed location appliances and is not recommended for your unit because it could be prone to nuisance tripping. However, be sure to consult your local codes. 4 QUICK START GUIDE u-line.com Door Swing Wall For Integrated models that are installed adjacent to a wall, 1/4" (6 mm) 1/4" (6 mm) clearance is recommended from wall on hinge side to allow the door to open 90°. Allow for additional space for any knobs or pulls installed on the integrated panel/frame. Stainless Steel models that are installed adjacent to a wall require 2-1/4" (57 mm) door clearance on hinge side to allow for door handle. Units have a zero clearance when installed adjacent to 90° Door Swing cabinets. Space Required For any Knobs or Pulls Integrated 2-1/4" MIN (57 mm MIN) Wall 90° Door Swing Stainless 5 QUICK START GUIDE u-line.com General Installation INSTALLATION 1. Plug in the power/electrical cord. LEVELING INFORMATION 1. Use a level to confirm 2. Gently push the unit into position. Be careful not to the unit is level. Level entangle the cord. should be placed along top edge and side edge as shown. 3. Re-check the leveling, from front to back and side to 1 side. Make any necessary adjustments. The unit’s top surface should be approximately 1/8" (3 mm) below 2. If the unit is not level, the countertop. remove grille and adjust legs as 2 necessary. Use 4. Install the anti-tip bracket. included tool to adjust the height of the rear legs. 5. Remove the interior packing material and wipe out the inside of the unit with a clean, water-dampened cloth. Integrated Panel Installation ALL 3000 SERIES EXCEPT DWR 1. Fully open door. Rotate Front Legs to Adjust Rotate Clockwise to raise rear leg. Rotate Counter-Clockwise to lower leg. 2. Starting at corner, pull gasket away from door. 3. Confirm the unit is level after each adjustment and repeat the previous steps until the unit is level. 3. Continue to pull gasket free from gasket channel. INSTALLATION TIP If the room floor is higher than the floor in the cutout 4. Upon removal, lay gasket down on a flat surface. opening, adjust the rear legs to achieve a total unit rear height of 1/8" (3 mm) less than the opening’s rear height. Shorten the unit height in the front by adjusting the front legs. This allows the unit to be gently tipped into the opening. Adjust the front legs to level the unit after it is correctly positioned in the opening. 6 QUICK START GUIDE u-line.com 5. The panel should be aligned with the outside edge NOTICE (opposite the hinge) and high enough to align with the It is important to ensure that all drilled holes are highest point in the door. drilled to the correct depth in order to avoid splits in the wood when hardwood is installed. Align Top Of Panel With Highest Point Of Door 8. Locate 6 of the #6x 1-1/2" (38 mm) screws provided with your unit. Align Panel Against Door Edge First 9. Using a Phillips screwdriver, place one screw into each of the 6 pilot holes and screw down. Do not overtighten screws. 10.Ensure the screws sit flush against the bottom of the NOTICE channel. Due to differences in floor construction or surrounding cabinetry, the panel may not sit flush with the top of the door. 6. Secure integrated panel to door using Integrated Panel Bar Clamp Integrated Panel clamps. A robust tape may also be 11.Remove clamps from door. used. U-Line recommends the use of bar clamps to secure the panel to the door. If using tape, be certain the NOTICE Door/Drawer If panel requires additional adjustment after removing clamps, slightly loosen each screw and Wood Panel adjust panel as necessary. Tighten screws upon completion. tape will not damage panel finish upon removal. 12.Starting at the corners, re-install the gasket into the gasket channel in the frame. Make sure the gasket is 7. Using a 7/64" (3 mm) drill bit, drill fully seated. Bar Clamp 6 pilot holes into the wood panel 1/2" (12 mm) deep using the holes in the door frame as a guide. 7 QUICK START GUIDE u-line.com 3000 SERIES DWR NOTICE 1. Fully open drawer. It is important to ensure that all drilled holes are drilled to the correct depth in order to avoid splits in the wood when hardwood is installed. 2. The panel should be aligned with the outside edge and high enough to align with the highest point in the drawer. 5. Locate 12 of the #6x 1-1/2" (38 mm) screws provided with your unit. Align Top Of Panel With Highest Point Of Drawer 6. Using a Phillips screwdriver, place one screw into each of the 6 pilot holes and screw down. Do not overtighten screws. Align Panel Against Drawer Edge First Integrated Panel Integrated Panel NOTICE Due to differences in floor construction or 7. Remove clamps from drawer. surrounding cabinetry, the panel may not sit flush with the top of the drawer. NOTICE 3. Secure integrated panel to drawer If panel requires additional adjustment after Bar Clamp removing clamps, slightly loosen each screw and using clamps. A adjust panel as necessary. Tighten screws upon robust tape may completion. also be used. ULine recommends the use of bar clamps to secure the panel to the drawer. If using Door/Drawer Wood Panel tape, be certain the tape will not damage panel finish upon removal. 4. Using a 7/64" Bar Clamp (3 mm) drill bit, drill 6 pilot holes into the wood panel 1/2" (12 mm) deep using the holes in the drawer frame as a guide. 8 QUICK START GUIDE u-line.com Control Quick Guide Actual Display: 3018R, 3018RGL and 3024R, 3024RGL, 3024BEV Actual Display: 3018WC Up Up Select Select Beverage 38°F Red Wine 55°F Down Down Can be displayed in Celsius Power U-Select Lighting Can be displayed in Celsius Power U-Select Lighting Actual Display: 3024DWR Actual Display: 3024ZWC Up Up Red Wine 55°F Down Zone Indicator Zone Toggle Zone Indicator Select Zone Indicator Zone Toggle Zone Indicator Select Beverage 38°F White Wine 5O°F Down Can be displayed in Celsius Power U-Select Lighting Market 38°F Can be displayed in Celsius Power U-Select Lighting Actual Display: 3024FZR Actual Display: 3036WCWC, 3036BVWC, 3036RR, Up 3036RRGL Up Zone Indicator Zone Toggle Zone Indicator Select Red Wine 55°F Down Select Polar 0°F White Wine 5O°F Down Can be displayed in Celsius Power U-Select Lighting Can be displayed in Celsius Power U-Select Lighting Control Function Guide: FUNCTION COMMAND DISPLAY/OPTIONS OFF Press and hold Display will count down from 5 to off ON Press and release Unit will come on immediately Adjust mode Press to select zone Press or Adjust temperature Adjust lighting Light ON/OFF with door Press Modes available in table below. and release to select zone (dual zone only) Press Press and release to scroll through the modes. Press or and release. When the “F” or “C” in the display is flashing, press or adjust the set point temperature. to adjust lighting to have light ON/OFF with door Press to select zone Press or Press and release to scroll through timer to set low, medium or high settings. Both zones will default to the same timer setting. Customer menu Press to and hold for 5 seconds Press 9 or to scroll through menu QUICK START GUIDE Mode Set Point Temperature Range °F (°C) °F (°C) Red Wine 55 (12) 55-65 (12-18) White Wine 50 (10) 45-55 (7-12) Sparkling Wine 45 (7) 38-50 (3-10) Deli 36 (2) 34-40 (1-4) Beverage/Drinks 38 (3) 34-65 (1-18) Market/Fresh 38 (3) 34-40 (1-4) Root 50 (10) 45-55 (7-12) Pantry 42 (5) 34-70 (1-21) Polar 0 (-18) (-5)-5 ([-21]-[-15]) u-line.com Sabbath Mode Up Select RETURN TO MENU SABBATH MODE OFF? Down This unit offers a Sabbath mode for users who require this functionality during Sabbaths. Sabbath mode disables system responses to user initiated activities and all external functions, including lighting, display and audible First Use alarms. The unit will still maintain internal temperatures and set points. All U-Line controls are preset at the factory. Initial startup requires no adjustments. To enable Sabbath Mode: NOTICE 1. Open the unit’s door to activate the display. U-Line recommends allowing the unit to run overnight before loading with product. 2. To access the Customer Menu, hold for 5 seconds. When plugged in, the unit will begin operating under the factory default setting. Follow the on screen prompt for 3. Press language selection and temperature units. To turn the unit off, press or to scroll through available selections. 4. Select Sabbath Mode from the Customer Menu by and hold for 5 seconds and pressing release. The display will show a countdown to switching . the unit off. 5. Press To power your unit on, simply press to select “Off”. and the unit will immediately switch on. 6. Press 10 . “Off” will begin to flash. QUICK START GUIDE 7. Press or u-line.com transportation charges for replacements under this to change “Off” to “On”. warranty and labor costs not specifically covered by 8. Press this warranty, shall be the responsibility of the to confirm your selection. purchaser. This warranty extends only to the original purchaser of the U-Line product. The Product The Display will fade out as the unit enters Sabbath Mode. Registration Card included with the product should be Sabbath promptly completed by you and mailed back to U-Line, or you can register on-line at www.u-line.com. Mode remains active until is quickly pressed and 3. The warranty listed above does not apply to floor released. display models. The warranty for these models shall be one year from the date installation. This one-year warranty does not apply to cosmetic damages. A proof Warranty of purchase may be required. U-LINE CORPORATION LIMITED WARRANTY 4. The following conditions are excluded from this limited 1. U-Line Corporation (“U-Line”) warrants each U-Line warranty: use of cleaners other than the recommended product to be free from defects in materials and stainless steel cleaners and U-Line Clear Ice Maker workmanship for a period of one year (two years on cleaner; installation charges; damages caused by Modular 3000 Series) from the date of installation. disasters or acts of God, such as fire, floods, wind, and U-Line further warrants the sealed system (consisting lightning; damages incurred or resulting from shipping, of the compressor, condenser, evaporator, hot gas improper installation, unauthorized modification, or bypass valve, dryer, and connecting tube) in each misuse/abuse of the product; customer education U-Line product to be free from defects in materials and calls; food loss and spoilage; door and water level workmanship for a period of five years from the date of adjustments (except during the first 30 days from the installation. date of installation); defrosting the product; adjusting the controls; door reversal; and cleaning the 2. During the initial one-year warranty period (two years condenser. on Modular 3000 Series) for all U-Line products U-Line shall: (1) repair any product or replace any part of a 5. U-Line products are designed to operate in ambient product; and (2) for all Marine, RV, and Domestic temperatures between 50°F and 100°F unless U-Line products sold and serviced in the United States otherwise noted in the product manual. Exposure to (including Alaska and Hawaii) and Canada, U-Line temperatures outside this range may cause shall be responsible for the labor costs performed by a degradation of performance and issues, such as lower U-Line authorized service company, incurred in ice production or spoiled contents, that are not connection with the replacement of any defective part. covered under the terms of this warranty as a result of During years two through five of the warranty period that exposure. U-Line product may not be subjected to for the sealed system, U-Line shall: (1) at U-Line’s temperatures below 40°F without following the option repair or replace any part of the sealed system; winterization and vacation shutdown procedures in the and (2) for all Marine, RV, and Domestic U-Line user guide. products sold and serviced in the United States (including Alaska and Hawaii) and Canada, U-Line shall 6. U-Line’s Outdoor Limited Warranty, set forth in this be responsible for the labor costs incurred in connection with the replacement of any defective part Paragraph 6 shall apply to U-Line models deemed of the sealed system. All other charges, including suitable for outdoor use by Underwriters Laboratory 11 QUICK START GUIDE u-line.com (“UL”) as noted in the U-Line Product Catalog, U-Line’s website, and/or on the serial tag located inside the product. Outdoor product may come into contact with rain by virtue of outdoor use. Exposure to other sources of water shall also cause this warranty to be void, including flooding of the area in proximity of the unit greater than 1/8" deep in water, hurricanes, splashing of pool water, or directing a spray from a hose or similar device into and around the unit. 7. If a product defect is discovered during the applicable warranty period, you must promptly notify U-Line at 1-800-779-2547 or the dealer from whom you purchased the product. In no event shall such notification be received later than 30 days after the expiration of the applicable warranty period. U-Line may require that defective parts be returned, at your expense, to U-Line’s factory in Milwaukee, Wisconsin, for inspection. Any action by you for breach of warranty must be commenced within one year after the applicable warranty period. 8. THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE DISCLAIMED. U-Line’s sole liability, and your exclusive remedy, under this warranty is set forth in the paragraphs above. U-Line shall have no liability whatsoever for any incidental, consequential, or special damages arising from the sale, use, or installation of the product or from any other cause whatsoever, whether based on warranty (express or implied) or otherwise based on contract, tort, or any other theory of liability. 9. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Copyright © 2016 U-Line Corporation. All Rights Reserved. Publication Number 30445 8/2016 Rev.A 12
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement