True Residential | TUR-24D-OP-B | Panel Installation Instructions | True Residential TUR-24D-OP-B Panel Installation Instructions

True Residential TUR-24D-OP-B Panel Installation Instructions
13 - 25
Ins tall ation S pecific ations
fo r S o l i d Pa n el R e a dy (o p) a n d
G l a s s Fr a m ed Pa n el R e a dy (o g)
15 INCH & 24 INCH INSTALL GUIDE
13
INS TALL ATION SPECIFIC ATIONS - SOLID (OP) AND G L A SS FR A MED PANEL (OG)
True’s units with Solid and Glass Framed Panels are designed to be inserted into a cabinet opening or free
standing. Below are recommended dimensions for rough opening.
True’s stainless steel cabinets are UL rated for use in outdoor settings.
In outdoor locations where the ambient temperature regularly exceeds 95˚F, it is recommended to vent the rear
of the cut out opening in the area shown below for optimum performance.
The recommended cut out size is 4” x 10”.
24 IN CH
15 IN CH
Rough Opening
HEIGHT
341/2 ”
Rough
Opening
HEIGHT
341/2 ”
Rough Opening
DEPTH
24”
Rough
Opening
DEPTH
24”
Rough Opening
WIDTH
24”
Rough
Opening
WIDTH
15”
23 7/8"
Front view
of unit
between
cabinets
4 1/8"
14
TRUE RESIDENTIAL LINE
29 3/4"
Front
view of
unit
between
cabinets
24 INCH
ALL REFRIGERATOR
TUR-24-R/L-OP-B
BEVERAGE CENTER
TBC-24-R/L-OP-B
TBC-24-R/L-OG-B
TUR-24-R/L-OG-B
TUR-24-D-OP-B
WINE CABINET
TWC-24-R/L-OP-B
TWC-24-R/L-OG-B
BEVERAGE DISPENSER
DUAL ZONE WINE CABINET
TWC-24DZ-R/L-OP-B
TWC-24DZ-R/L-OG-B
TUR-24BD-R/L-OP-B
TUR-24DD-R/L-OP-B
15 INCH & 24 INCH INSTALL GUIDE
15
23 7/8"
23 7/8"
23 1/8"
3/4"
46 7/8"
34 1/4"
34 1/4"
25 1/4"
4 1/8"
3 3/4"
23 7/8"
23 7/8"
23 1/8"
42 5/8"
34 1/4"
34 1/4"
21"
4 1/8"
3 3/4"
23 7/8"
23 7/8"
11 7/8"
23 1/8"
10 1/4"
46 7/8"
49 7/8"
49 7/8"
46 3/8"
25 1/4"
34 1/4"
34 1/4"
4 1/8"
3 3/4"
24” SIN G L E TA P UNI T A C C O MM O D AT E S (1) SH O R T 1/ 4 B A R R E L , (1) SL IM
1/ 4 B A R R E L , O R (1) 1/ 6 B A R R E L . 24” DUA L TA P UNI T A C C O MM O D AT E S
( 2 ) 1/ 6 B A R R E L S O R (1) SL IM 1/ 4 B A R R E L A ND (1) 1/ 6 B A R R E L .
* IN C L UD IN G
3 / 4” T HI C K PA N E L ( P R O V ID E D BY O T H E R S )
D IM EN SI O N S M AY VA RY BY ± 1 / 8 ”
16
TRUE RESIDENTIAL LINE
1 5 INCH
ALL REFRIGERATOR
TUR-15-R/L-OP-B
TUR-15-R/L-OG-B
WINE CABINET
TWC-15-R/L-OP-B
TWC-15-R/L-OG-B
BEVERAGE DISPENSER
TUR-15BD-R/L-OP-B
15 INCH & 24 INCH INSTALL GUIDE
17
14 7/8"
23 7/8"
37 7/8"
34 1/4"
34 1/4"
16 1/4"
4 1/8"
3 3/4"
23 7/8"
14 7/8"
7 1/2"
49 7/8"
10 1/4"
37 7/8"
49 7/8"
46 3/8"
34 1/4"
34
1/4"
4 1/8"
3 3/4"
15” SING L E TA P UNI T A C C OMMO D AT E S
(1) SL IM 1/ 4 B A R R EL O R (1) 1/ 6 B A R R EL .
* IN C L UD IN G
3 / 4” T HI C K PA N E L ( P R O V ID E D BY O T H E R S )
D IM EN SI O N S M AY VA RY BY ± 1 / 8 ”
18
TRUE RESIDENTIAL LINE
16 1/4"
CUS TOM PANEL INS TALL ATION - SOLID DOOR
S O L ID D O O R
24 INCH
15 INCH
DOOR PANEL WIDTH
235 / 8 ”
145/8”
DOOR PANEL HEIGHT
29 23/32 ”
2923 /32”
DOOR PANEL DEPTH
3/4” max
3/4” max
DOOR PANEL WEIGHT
10 lb. max
10 lb. max
24 IN CH
15 IN CH
23 5/8 "
17 23/32 "
5
29/32
29/32
14 5/8 "
29/32
"
"
"
29/32
61/8 "
29/32
"
BACK VIEW OF SOLID
DOOR OVERLAY PANEL
147/8 "
29 23/32 "
"
61/8 "
BACK VIEW OF SOLID
DOOR OVERLAY PANEL
23 5/8 "
7
"
5/16
147/8 "
23 5/8 "
29 23/32 "
15 INCH & 24 INCH INSTALL GUIDE
19
CUS TOM PANEL INS TALL ATION - G L A SS DOOR
S O L ID D O O R
24 INCH
15 INCH
DOOR PANEL WIDTH
235 / 8 ”
145/8”
DOOR PANEL HEIGHT
29 23/32 ”
2923 /32”
DOOR PANEL DEPTH
3/4” max
3/4” max
DOOR PANEL WEIGHT
10 lb. max
10 lb. max
2” min
2” min
RAIL / STYLE DIMENSION
24 IN CH
15 IN CH
23 5/8 "
17 23/32 "
5
29/32
29/32
14 5/8 "
29/32
"
"
"
29/32
61/8 "
BACK VIEW OF
GLASS DOOR
OVERLAY PANEL
25 23/32 "
147/8 "
147/8 "
viewable
area
23 5/8 "
23 5/8 "
29 23/32 "
29 23/32 "
19 5/8 "
viewable
area
TRUE RESIDENTIAL LINE
29/32
"
61/8 "
BACK VIEW OF GLASS
DOOR OVERLAY PANEL
20
7
"
5/16
10 5/8 "
viewable
area
"
CUS TOM PANEL INS TALL ATION - DR AWER
D R AW E R
24 INCH
DRAWER PANEL WIDTH
235 / 8 ”
DRAWER PANEL HEIGHT
1411/16”
DRAWER PANEL DEPTH
3/4” max
23 5/8 "
17 23/32 "
29/32
5 29/32 "
29 / 32
"
"
2 31/32 "
BACK VIEW OF
TOP DRAWER
OVERLAY PANEL
11 23/32 "
1411/16 "
17/ 32
"
23 5/8 "
17 23/32 "
29/32
5 29/32 "
17/ 32
"
"
2 31/32 "
BACK VIEW OF
BOTTOM DRAWER
OVERLAY PANEL
11 23/32 "
1411/16 "
29 / 32
"
15 INCH & 24 INCH INSTALL GUIDE
21
SOLID (OP) AND G L A SS FR A MED PANEL (OG) INS TALL ATION
Required Tools:
•
•
•
•
Phillips Screwdriver
1
3/8” Wrench
1/8” Drill Bit
Ten (10) Screws #6
SEE PAGES 19-20 FOR OVERLAY PANEL DIMENSIONS
BEFORE INSTALLING.
FOR EASY OVERLAY INSTALLATION REFRIGERATOR
DOOR REMOVAL IS REQUIRED.
NO T E : D O NO T IN S TA L L A SO L ID PA NEL ON
A G L A S S D O O R . T HI S M AY C AU SE MOI S T UR E
T O F O R M BEHIND T HE PA NEL R E SULT ING IN
DAMAGE.
2
1. Open front door and pull grill forward to remove.
2. To remove door back out two bottom hinge screws
with a 3/8” wrench. Secure door while removing
screws. Remove two Phillips screws from the top
hinge. Save all these screws for later reinstall.
3
3. Lay door on a safe solid surface. If retrofitting
glass door model be careful not to damage glass.
Lay cardboard or other safe material down before
working on the door. Remove door gasket from the
inside of the door frame. Place gasket to the side
for later reinstall.
4. There are pre marked areas on the front of the
4
door. Drill these pre marked holes with 1/8” drill
bit. Make sure to go all the way through the door.
NO T E : IF H A ND L E I S BEING U SED ON
O V ER L AY IN S TA L L I T BEF O R E S T EP 7 ( SEE
IM A G E A ) . F O R BE S T IN S TA L L AT ION, S CR E W S
AT TA CHING H A ND L E SHOUL D BE R ECE S SED.
5. It is recommended to clamp the door front on top of
the overlay before drilling pilot holes and installing
anchor screws. The clamp ensures the overlay
panel and door stay aligned with each other while
installing. Once panel is clamped in place, pilot
holes may be drilled into the panel from the rear
side of the door.
22
TRUE RESIDENTIAL LINE
5
Remove screws
from top and
bottom hinge
6.
Once all holes are pre drilled use the appropriate
specified screws to secure the overlay panel onto
the front of the refrigerator door.
7.
Reinstall all components in reverse order. Door
gasket snaps back into place. Overlay panel and
door stay aligned with each other while installing.
6
7
Reinstall screws
on top and
bottom hinge
S O L ID O V E R L AY PA NE L
24 IN CH
15 IN CH
IM A G E A
G L A S S O V E R L AY PA NE L
24 IN CH
15 IN CH
GASKET
DOOR
OVERLAY PANEL
HANDLE
15 INCH & 24 INCH INSTALL GUIDE
23
DR AWER OVERL AY PANEL INS TALL ATION
Required Tools:
1
• Phillips Screwdriver
• 1/8” Drill Bit
SEE PAGE 21 FOR OVERLAY PANEL DIMENSIONS
BEFORE INSTALLING.
FOR EASY OVERLAY INSTALLATION, DRAWER FRONT
REMOVAL IS REQUIRED.
1. Open the drawer and detach the front drawer panel
by removing four #2 Phillips screws (two on each
side). (See image 1). Save all these screws for later
reinstallation.
2
2. Remove front drawer panel gasket.
3. Using a 1/8” drill bit, drill out the eight pilot holes
3
(each drawer) from the front of the drawer panel.
Drill completely through the panel.
Front of
drawer
4. Attach drawer handle to the front of the overlay
panel. Attach handle before step 5.
5. Lay overlay panel face-down on a safe solid
surface. Lay drawer panel face-down on top of
the overlay panel. Align panels and secure with a
clamp. Lay cardboard or other soft or safe material
down before working on drawer front.
4
6. Secure overlay panel to drawer panel using
appropriate size screws.
5
7. Reattach drawer gasket by pressing and snapping
back into place in gasket channel.
8. Reattach drawer panel front to the drawer using
four screws.
24
TRUE RESIDENTIAL LINE
6
Back of
drawer
7
8
D R AW E R O V E R L AY PA N E L
24 IN CH
15 INCH & 24 INCH INSTALL GUIDE
25
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising