Summit | SBC635MSSTB | manual | Summit SBC635MSSTB Manual

Summit SBC635MSSTB Manual
COMMERCIAL BEER DISPENSER
Model SBC635M
Use and Care Guide
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND
OPERATING INSTRUCTIONS.
Keep proof of original sales date (such as your sales slip) with this
manual to establish the warranty period.
Write the Serial Number here. You’ll find it on a plate located either
on the back of the appliance or on an interior wall.
_____________________________________
Felix Storch, Inc.
770 Garrison Avenue
Bronx, NY 10474
www.summitappliance.com
TABLE OF CONTENTS
Important Safeguards .................................................................................. 2 – 3
Location of Parts ................................................................................................ 4
Before Using for the First Time ........................................................................ 4
Placement and Installation ........................................................................... 5 - 9
Choosing the right place ............................................................................ 5
Installation ................................................................................................. 5
Applications ............................................................................................... 5
Connecting to power supply ...................................................................... 5
Reversing the door swing .......................................................................... 6
Installation of accessories ................................................................... 7 – 9
Operation .................................................................................................. 10 – 12
Control panel ........................................................................................... 10
Setting the temperature ........................................................................... 10
Switching between Celsius and Fahrenheit ............................................. 10
‘Rapid cooling’ function ........................................................................... 10
Automatic defrosting ............................................................................... 11
Error prompts .......................................................................................... 11
Normal functioning .................................................................................. 11
Dispensing beer .............................................................................. 11 – 12
Understanding beer temperature ............................................................ 12
Beer serving tips ..................................................................................... 12
Maintenance of the Beer Dispenser ............................................................... 13
Cleaning .................................................................................................. 13
Out of service .......................................................................................... 13
Transporting the unit ............................................................................... 13
Specifications of beer kegs ..................................................................... 13
Disposing of a Worn-Out Appliance ............................................................... 14
Draft Beer Troubleshooting .................................................................... 15 – 16
General Troubleshooting ................................................................................ 17
Limited Warranty .............................................................................................. 19
1
IMPORTANT SAFEGUARDS
WARNING!
To reduce the risk of fire, electric shock or injury when using this
appliance, follow these basic precautions:
1. Read all instructions before using the appliance.
2. The appliance must be correctly connected to the power supply.
3. Immediately replace worn power cords, loose plugs and faulty power outlets.
4. Do not operate your appliance in the presence of explosive fumes.
5. Disconnect the appliance from the power supply before cleaning or repairing it.
Only a qualified technician should repair it.
6. Never stand on top of or inside this appliance, or swing on the door. Avoid
putting weight on top of the appliance.
7. To reduce likelihood of injury, do not let children play with this appliance.
8. Do not operate the valve control unless the cylinder is completely installed and
connected.
9. Do not attempt to repair or replace any part unless this is recommended in this
Use and Care Guide. Leave other service matters to qualified technical
personnel.
10. Keep packing materials away from children as they could become a choking
hazard.
11. Do not spray or flush the beer dispenser with water, and avoid keeping it in a
damp place since this could damage the electrical insulation.
DANGER!
Risk of child entrapment!
Child entrapment and suffocation are not problems of the past. Junked or
abandoned appliances are still dangerous, even if they will "just sit at the
curb for a few days."
Before discarding your old appliance:
• Take off the door.
• Leave the shelves in place so that children may not easily climb
inside.
1.
2.
3.
4.
SAFETY PRECAUTIONS REGARDING ELECTRICAL MATTERS
Do not pull on the power cord when unplugging the machine. Grasp the plug
firmly and pull it straight out of the socket. Do not pull the plug with wet hands.
Keep the power cord at the back of the appliance to avoid tripping accidents or
damage to the cord.
If the power cord is damaged or frayed, it must be replaced by a qualified
service professional.
Use only a standard three-hole grounded power socket rated above 10A. The
socket should not be shared with other appliances.
2
5. Be sure the plug fits firmly into the socket and that the socket is grounded.
6. The use of an extension cord is NOT recommended.
7. The beer dispenser requires an AC power supply of 110~120V/60Hz and pulls
a current of over 10A. The fuse or circuit breaker should be rated at 15A.
8. If the leakage of a combustible gas is detected, turn off the gas valve and
open the doors and windows. To reduce the risk of fire caused by a spark, do
not pull out the plug of the beer dispenser or of any other electrical device.
SAFETY PRECAUTIONS REGARDING CO2 (CARBON DIOXIDE) GAS
Always connect the CO2 cylinder to a regulator! Failure to do so may cause an
explosion resulting in possible injury or death when the cylinder valve is opened.
Never connect the CO2 cylinder directly to the product container.
Always keep CO2 cylinders away from heat. Store extra cylinders in a cool place
(preferably below 70°F). Securely fasten cylinders with a chain in an upright
position when storing.
Never drop or throw a CO2 cylinder.
Always check the D.O.T. (Department of Transportation) test date on the
cylinder neck before installation. If it has been more than 5 years, do not use.
Return the cylinder to your gas supplier.
Never connect a product container unless there are at least two safety devices in
the pressure system: one on the CO2 regulator and the other on the product
container or in the pressurized gas line.
The recommended pressure for the CO2 system is 8-10 lbs.
SAVE THESE INSTRUCTIONS
Notes on Energy Consumption
This product is designed for commercial use and is UL approved to standard 471
(commercial refrigeration). It features an upgraded cooling system over units
designed for household use. At national average electric rates it will use less
than $1 per month more in electricity than household units.
Tips to save energy and maintain optimum performance:
When positioning this unit: If used freestanding allow 4 inches of clearance on
top, at the sides and in the rear for sufficient airflow. Do not use under a bar or
counter.
3
LOCATION OF PARTS
Beer tower assembly
Upper cover guardrail
Drip tray
Top cover
Display and control
panel
Cabinet
Evaporator
CO2 regulator valve
CO2 gas cylinder
Ball valve
CO2 tank supporter
Beer keg
Control board device
Door
Compressor
chamber cover
Bottom pad
Caster
BEFORE USING FOR THE FIRST TIME
The SBC635M is designed for dispensing beer only, and is not recommended for
storing perishable foods such as meats or dairy products.
Before connecting the appliance to the power supply, leave it standing for 2 to 3
hours. This allows the refrigerant to drain back into the compressor and reduces
the risk of malfunctions in the cooling system caused by shipping.
Clean the appliance thoroughly, especially the interior. (See Maintenance of the
Beer Dispenser.) Proper grounding must be ensured to reduce the risk of shock
and fire. Do not cut or remove the grounding plug!
TIPS FOR SAVING ENERGY
Try not to open the door too often, especially when the weather is hot and humid.
Once you open the door, try to close it as soon as possible.
If possible, disconnect the power before changing a keg of beer.
Keep the unit out of direct sunlight.
Periodically, check that the beer dispenser seals well and that none of the
contents prevent the door from closing.
4
PLACEMENT AND INSTALLATION
Choosing the Right Place
To ensure that your beer dispenser works at the maximum efficiency it was
designed for, install it in a location where there are proper air circulation and
electrical connections.
Choose a location where the beer dispenser will be away from any heat sources
and will not be exposed to direct sunlight.
Remove all packing materials before using the beer dispenser.
Place the machine on a smooth, flat and sturdy surface.
Installation
Your appliance is not designed to operate in enclosed spaces. When placing
your unit, make sure you allow at least 4” of clearance at the sides, rear and top
to allow for adequate airflow.
Applications
All SBC635M beer dispensers meet UL Commercial Standard 471 and are
designed for commercial use.
Connecting to Power Supply
Connect this appliance to a 3-prong power supply socket (which has a ground
terminal). If you only have a two-prong outlet, have it replaced by a qualified
technician with an outlet that meets the local codes.
 DO NOT USE AN EXTENSION CORD 
Required nominal voltage and frequency are indicated on the rating plate. The
connection to the power supply and grounding has to be made according to
current standards and regulations. The appliance resists temporary voltage
fluctuations with a tolerance of ±10%.
Once connected, allow the appliance to operate empty for two to three hours
before putting a beer keg inside.
5
Reversing the Door Swing
Figure 1 (Default position)
Figure 2 (After door reversal)
1. Upper hinge cover
2. Screws
3. Upper hinge
4. Door
5. Lower door hinge
6. Screws
7. Hole cover
8. Cabinet
9. Pin cap
The beer dispenser can be opened from either the right side or the left. By default, the
door hinge is on the right side. If you prefer it on the left, please follow these instructions:
Note: All of the parts that are removed must be kept for the reinstallation of the door.
1. Remove the three screws (6) holding lower door hinge (5). Keep hinge for later use.
2. Remove the door from the upper hinge (3), and keep the padded surface upward to
prevent scratching.
3. Remove the upper hinge cover (1), remove the two screws (2), remove the upper
hinge (3) and keep it for later use.
4. Remove the hole cover (7) and transfer it to the same location on the opposite side.
5. Insert the lower door hinge (5) into the left side, fixing the hinge into place by
tightening all the screws (6).
6. Remove the pin cap (9) from the left side of the upper door frame and then transfer it
to the same location on the opposite side.
7. Set the door on the lower door hinge (5), keep the door level, then fix the upper hinge
(3) to the body (8) by the screws (2).
8. Put on the upper hinge cover (1).
6
Installation of Accessories
Diagram of overall structure
Drip tray
Soft red CO2 tube
Beer keg handle
Beer keg
Installation components
Tap handle
Draft beer tap
CO2 tank bracket and bolt
CO2 hose clamp
Installation steps
1. Install universal wheels:
Lock braking guidelines for universal wheels
with foot brakes (See Figure 1):
Install the two universal wheel washers at the front of the cabinet base, and
then install two universal wheels without foot brakes. Next, install the two
universal wheels with foot brakes at the back of the cabinet base. Once
7
Drip tray assembly
installed these rear wheels will keep the unit from moving if you step on the
foot brakes (See Figure 2):
2. Install the beer tower assembly and the mixed ball valve:
a) Plug the beer tower assembly into the top cover of the beer dispenser:
3.0” tower: This does not require a tower
buckle. Put beer tower directly over the
hole at the top of the beer dispenser’s
upper surface. Fix the beer tower assembly with screws directly on the upper surface of the beer dispenser. (See Fig. 3).
2.5” tower: This requires the tower buckle.
Place the beer tower at the hole in the upper surface of the beer dispenser
at an inclination of 60°, and rotate 60° clockwise along the card slot. Be
sure the tap is facing toward the front of the machine. Attach the beer tower
with washers (See Figure 4).
b) Take out the accessories of the mixed ball valve. Attach the transparent
hose to the beer outlet of the mixed ball valve (See Figure 5).
3. Install CO2 gas cylinder and CO2 regulator valve:
a) Fix the two CO2 hose clamps on the red
CO2 tube (See Figure 6).
b) Connect the ends of the red CO2 tube
respectively to the CO2 intake port of the
mixed ball valve and the round outlet of
the CO2 regulator valve. Lock these
connections firmly with the two clamps on
the red CO2 tube (See Figure 7).
CO2 regulator
valve
Safety switch
Red CO2 tube
Regulating
table
CO2 gas
cylinder
Bracket and retainer
of CO2 tank
c) Using the wrench, tighten the CO2 regulator table valve with the hex nut port
to the gas outlet of the CO2 tank (See Figure 8).
8
d) Place the CO2 tank and CO2
regulator valve component into the
cabinet and fix the CO2 tank
with tank bracket and bolt (See
Figure 8).
4. Install the beer keg:
Place the beer keg into the cabinet and
firmly connect the keg’s opening to the
connection port of the mixed ball valve
(See Figure 10).
Note: To place a keg into the cabinet,
use the keg handle to move the keg
to the front of the open beer
dispenser, then carefully tip the keg
so that the raised bottom edge contacts the edge of the cabinet. Finally, lift
the keg handle to raise the keg to the level of the floor of the cabinet and
push the keg into place.
5. Install tap handle and beer tap:
Screw the tap handle clockwise into the beer tap to make a firm connection.
Then connect the tap to the beer tower components and tighten with a wrench
(See Figure 9).
6. Install upper cover guardrail and drip tray:
Set the upper cover guardrail and drip tray on top of the beer dispenser (See
Figure 10).
Notes:
• When replacing the beer keg, first turn off the safety switch on the CO2
regulator valve and remove the mixed ball valve to take out the keg.
• When replacing the CO2 gas cylinder, remember to turn off the main
switch of the CO2 gas cylinder and the safety switch on the CO2 regulator
valve. Afterwards, use a wrench to loosen the hexagonal nut port
connecting the CO2 regulator valve with the CO2 tank. Then, using a
wrench, remove the fixed bolt of the CO2 tank to take out the CO2 tank.
• During the installation process, be sure that all parts are connected tightly
and that there are no gas leaks.
• When connecting the hose to the connection port, you can dip the ends
into warm water to make the connection easier.
• If the high-pressure compressed gas in the CO2 tank is not handled
properly, it could be dangerous:
a. Make a note of the D.O.T. testing date on the cylinder neck before
installation. If it is more than 5 years old, don’t use the product. Return
it to the gas supplier.
b. Keep gas cylinder away from heat sources. Unused cylinders should
be placed upright in a cool, ventilated place (preferably at 70°F).
9
OPERATION
Control Panel
The control panel is located just above the door, and looks like this:
DOWN: Lowers UP: Raises
temperature
temperature
Display module
Fahrenheit/Celsius
switching
Rapid
cooling
Setting the Temperature
Adjust the DOWN or UP button on the control panel until the display module
shows the desired temperature.
The display module shows the set temperature, and the temperature-controlled
range varies from 32 to 50°F (0 to 10°C).
The display module shows 5°C at the initial power up. Each press of the DOWN
or UP button decreases or increases the temperature displayed by 1°C (1°F).
The optimal temperature for the storage and distribution of beer is 34 - 38°F (1.1
to 3.3°C.
Switching between Celsius and Fahrenheit
You can switch between a Celsius and Fahrenheit temperature display by
pressing the °F/°C button. When the displayed temperature is in Celsius, the “°C”
symbol will be illuminated; with a Fahrenheit display, “°F” will be illuminated.
‘Rapid Cooling’ Function
Press the Deep Chill button to enter the Rapid Cooling state. The “rapid cooling”
icon on the display module will light and the temperature display will read “00”.
After entering the Rapid Cooling mode, the appliance will work continuously for
24 hours and the icon will remain lit. After that time, the icon will turn off and the
appliance will return to its former state.
You can cancel the Rapid Cooling mode any time during the 24 hour period by
simply pressing the Deep Chill button again.
Note: The Rapid Cooling function is normally used only for cooling the first keg of
beer in the appliance, when that keg is to be used as soon as possible. To
prevent over-cooling the beer, do not use Rapid Cooling for succeeding kegs.
10
Automatic Defrosting
There is usually no need to defrost the beer dispenser because the ice deposited
on the inner back wall is automatically defrosted. Ice deposits on the inner back
wall during compressor operation. Later on, when the compressor is not
operating, the ice defrosts and water drains through the outlet in the inner back
wall into the drain pan situated above the compressor where it evaporates. If you
see water building up in the rear of the unit, check that the drain trough is not
clogged. Use a pipe cleaner or a piece of flexible wire. During extremely hot and
humid weather, some ice may build up. If necessary, remove contents of the
beer dispenser, unplug the unit and allow defrosting. A hair dryer may facilitate
the process.
Error Prompts
When the following prompts appear in the display module, there is a failure in the
appliance. Although one of the fault conditions occurs, the beer dispenser may
still work. However, you should contact our Service Department as soon as
possible to obtain advice on handling the situation.
Prompt
Fault
E1
Temperature sensor
failure in the
refrigerated zone
E4
Defrosting sensor
failure in the refrigerator
compartment
E7
Ambient
temperature
sensor fault
Note: When two or more sensors fail simultaneously, all fault codes will display
alternately on the display module. If the ambient temperature and defrost
sensors fail, any key may be pressed. The temperature is adjustable. The
fault display will be restored after 15 seconds.
Normal Functioning
•
•
If there is a sound of rushing water when the machine is in use, the noise is
caused by the refrigerant flowing in the cooling pipes and running through he
compressor. This is a normal phenomenon.
The beer dispenser has no heating function. When the temperature is set
higher than the ambient temperature, the machine will not run.
Dispensing Beer
Follow these steps to dispense beer:
1. Make sure the beer dispenser is plugged in properly to a 120V, 60Hz, 15 amp
grounded AC outlet.
2. Place the drip tray under the beer tap.
3. Open the beer faucet by pulling the tap towards you quickly and completely to
dispense the beer.
4. Increase the pressure if the beer runs too slowly. At the correct pressure and
temperature, a 10-oz glass should be filled in 4 seconds.
11
5. Hold the glass steady at a 45° angle. When it is 2/3 full, start straightening the
glass. Proper foam should be a tight, creamy head and the collar on an
average glass should be 3/4" to 1" high.
Note: It is normal to see condensation forming on the tap. It is caused by the
difference in temperature between the cold beer and the inner surfaces of the
tap when beer is flowing through the line.
Understanding Beer Temperature
The recommended temperature for serving chilled beer is between 38° and 43°F.
To maintain this temperature in average room conditions of 70°F, set the
thermostat accordingly.
Notes: During the summertime when temperatures are warmer, we recommend
that you adjust the control to a cooler setting. Selecting and maintaining the
proper temperature inside the refrigerator cabinet is necessary for maintaining
the flavor and freshness of beer. Excessively cold or warm temperatures
inside the refrigerator cabinet may cause a loss of flavor.
The best temperature for storing a keg is approximately 38°F.
Sour beer is produced as a result of secondary fermentation above 45°F.
Beer Serving Tips
The following tips will help you serve the perfect beer. To serve beer from the
tap similar to the way it left the vat, check the following:
• Cleanliness (see Maintenance of the Beer Dispenser)
• Temperature (see Setting the Temperature and Understanding Beer
Temperature)
• Pressure (The recommended pressure for the CO2 system is 8-10 lbs.)
• Use only CO2 gas
12
MAINTENANCE OF THE BEER DISPENSER
Cleaning
To optimize cooling and to save energy at the same time, dust the back of the
beer dispenser periodically.
The interior should be cleaned regularly. Use a soft towel or sponge that has
been dampened in a solution of mild detergent. Rinse with clean water and dry
with a cloth. Leave the door open for a while to allow the unit to dry thoroughly
before turning the power back on.
Do not use a hard brush, steel wool, wire brush, or abrasives such as toothpaste,
or organic solvents like alcohol or acetone to clean the beer dispenser.
When cleaning or rinsing the unit, be careful not to let the control panel or any
electrical components become wet.
Out of Service
If the machine will be out of service for more than three weeks, unplug it and
clean and dry it thoroughly. Allow the door to remain open slightly to prevent the
buildup of mold and odors.
Transporting the Unit
Firmly fix any loose items inside the beer dispenser with tape. Tape the door shut
so it will not open during transportation.
Loosen the two foot brakes before moving the unit.
Specifications of Beer Kegs
Keg sizes that can be used in your beer dispenser:
1/2 barrel
59 liters
15.5 gals.
1,984 oz.
164 / 12-oz. Glass
1/4 barrel
30 liters
7.8 gals.
992 oz.
82 / 12-oz. Glass
1/6 barrel
20 liters
5.2 gals.
661 oz.
55 / 12-oz. Glass
1/8 barrel
15 liters
4.0 gals.
496 oz.
41 / 12-oz. Glass
Note: Our beer dispenser accepts almost all brand name 1/2 kegs. However,
Coors’ kegs do not fit in our unit.
13
DISPOSING OF A WORN-OUT APPLIANCE
• When your appliance finally wears out, dispose of it.
• Before you dispose of an old appliance: Take the door or doors off but leave
•
•
•
•
any shelves or drawers in place so that children cannot easily climb inside.
The refrigerating system of the appliance is filled with refrigerant and insulating
substances that should be recycled separately. Either have a licensed
appliance repair company or dealer remove the appliance or call your local
recycling office for the appropriate disposal information.
For the sake of environmental protection, when moving the appliance, be
careful not to damage the rear wall (the condenser unit or the tubes) or any
part of the refrigeration system inside the appliance.
This beer dispenser is 100% CFC-free, but the coolant is under pressure and
puncturing the sealed system could be dangerous. The coolant used in the
sealed system is non-toxic.
Many older appliances may contain refrigerants that are harmful to the
environment, and should be recycled by a lawfully licensed company.
14
DRAFT BEER TROUBLESHOOTING
Problem
Cause
Correction
Beer is cloudy:
The beer in the
glass appears
hazy and not clear.
Excessively low
temperatures
may cause
hazy or cloudy
beer,
particularly
when the beer
lies in the cold
coil for long
periods of time.
Drain a few ounces before drinking.
Glasses may
not have been
cleaned
properly.
Do not wash beer glasses together with glasses
that have contained milk or any other fatty
substance. An excessive amount of germicide
build-up may also leave a fatty film, which will
cause beer to go flat.
Raise the temperature setting of the unit.
It is preferable to steam and sterilize glasses
where health laws permit.
Wash glasses thoroughly with a good detergent
to remove all fatty substances (e.g., lipstick).
Do not use soap.
Do not wipe the glasses dry. Permit glasses to
air-dry by placing them on a wire rack or
corrugated metal sheet.
Rinse the glasses in fresh cold water just before
serving beer. It is best to serve beer in a wet
glass.
Improper
drawing of beer
into glass
Open the faucet quickly and completely; proper
foam should be a tight creamy head. The collar
on the average glass should be ¾" to 1" high.
Beer drawn without a head has the appearance
of being flat.
Not enough
pressure
Increase the pressure if beer runs too slowly.
The correct flow should fill a 10-oz glass in 4
seconds (approx. 8 oz of liquid). Check the
pressure source to determine whether there are
obstructions in the air line. Replace a sluggish
air source or the CO2 regulator and gauge. The
tank pressure must always be higher than the
pressure used on the keg. Always apply
pressure to the keg before drawing beer.
15
Beer has off taste:
Often bitter and
bite-y; sometimes
completely lacking
flavor and zest. It
may also have an
oily or foul odor
which may carry
an unpleasant
taste.
Improper
cleaning of the
tap
Brush and clean the tap properly. It should be
scoured using a detergent, then rinsed clean.
Contaminated
air line
Beer tube should be examined. If contaminated,
it should be replaced.
Condensation is
forming on the tap.
It is normal to
see condensation forming
on the tap. It is
caused by a
difference in
temperature
between the
cold beer and
the surfaces of
the tap when
beer is flowing
through the line.
Beer that is left
in the tap is not
cooled by the
beer dispenser.
After a period of non-use, a few ounces should
be drained before drinking.
16
GENERAL TROUBLESHOOTING
If there is a problem with the beer dispenser itself, see if you can find it listed in
the chart below. You may be able to save yourself the cost of a service visit.
Problem
Possible Cause
The beer dispenser doesn’t
work.
Power supply not firmly connected.
Supplied voltage is too low.
Tripped circuit breaker or blown fuse.
The machine switches on
and off frequently.
Indoor temperature is higher than usual.
Machine door is opened frequently.
Door is not completely closed.
Temperature control is not set correctly.
Door cannot be closed
properly.
Beer keg not properly placed.
Beer dispenser is not level.
Door was reversed and re-installed incorrectly.
Metal plate or beer kegs are out of place.
Noise
Rushing noise may be the sound of refrigerant
flow, which is normal.
As each cycle ends, the gurgle of refrigerant flow
may be heard.
Contraction and expansion of inner wall may cause
pops and crackles.
17
NOTES
18
LIMITED WARRANTY
ONE-YEAR LIMITED WARRANTY
Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is
operated and maintained according to instructions attached to or furnished with the product, warrantor will
pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service must
be provided by a designated service company. Outside the 48 states, all parts are warranted for one year
from manufacturing defects. Plastic parts, shelves and cabinets are warranted to be manufactured to
commercially acceptable standards, and are not covered from damage during handling or breakage.
5-YEAR COMPRESSOR WARRANTY
1. The compressor is covered for 5 years.
2. Replacement does not include labor.
ITEMS WARRANTOR WILL NOT PAY FOR:
1. Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to
replace or repair fuses or to correct wiring or plumbing.
2. Service calls to repair or replace appliance light bulbs or broken shelves. Consumable parts (such as
filters) are excluded from warranty coverage.
3. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation,
installation not in accordance with electrical or plumbing codes, or use of products not approved by
warrantor.
4. Replacement parts or repair labor costs for units operated outside the United States.
5. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
6. Expenses for travel and transportation for product service in remote locations.
7. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not
installed in accordance with published installation instructions.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE
PRODUCT REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR.
WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE.
WARNING! This product may contain chemicals known to the state of California
to cause cancer or birth defects or other reproductive harm. For more information,
visit: www.summitappliance.com/prop65
Chemicals known by the manufacturer to be present in this product in concentrations
higher than threshold limits: NONE.
FELIX STORCH, INC.
770 Garrison Avenue
Bronx, NY 10474
Phone: (718) 893-3900
Fax: (718) 842-3093
www.summitappliance.com
For parts and accessory ordering,
troubleshooting and helpful hints, visit:
www.summitapplianceparts.com
19
Printed in China
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising