Yes | CTS90FP3MD1 | Spec sheet | Yes CTS90FP3MD1 Spec Sheet

Café ™ 30" Built-In French-Door
Single Convection Wall Oven
CTS90FP4MW2 / CTS90FP3MD1
FEATURES
Configuration
Cooking System
Oven Cleaning Type
Cleaning Time
Oven Cooking Modes
Self-Clean Oven Door Lock
Control Type
ALSO
AVAILABLE IN
CTS90FP3MD1
Matte Black with
Brushed Stainless
handle and knobs
Oven Features
Oven Rack Features
Oven Control Features
WiFi Connect
Connected Capabilities
Cooking Technology
Oven Interior
FEATURES & BENEFITS
Easily open both doors using a single hand with French
door design.
Make crispy flat breads, golden cookies, and tender turkey dinners
with True European Convection with Direct Air that uses a variable
speed fan to circulate head from the top down.
Control your oven from any room in the house with your Smart
phone using WiFi Connect.
When you’re updating your kitchen, attention to detail is a priority.
That’s why Café wall ovens are guaranteed for an exact fit for an
easy and seamless replacement.
See your soufflé's rise without opening the door with slowly
illuminating halogen oven lighting.
Keep your oven looking like new at all times with a steam clean
option for small spills and a self clean cycle for larger messes.
Easily remove everything from heavy roasts to delicate desserts
with self- clean roller racks that stay in both ovens during the selfclean cycle.
Achieve an even brown, every time, no matter the size with
a ten-pass dual broil element.
Achieve an even bake, every time, no matter the size with
a ten-pass bake element.
Cook appetizers, entrees and desserts all at once in 5.0 cu. ft.
capacity ovens.
Precisely control heat and easily wipe away messes with
electronic dial controls.
APPEARANCE
Oven Door Features
Handle
Handle Design
Installation
Dual Window; French-Door
Designer Style
GE Cafe
Above Warming Drawer; Side-by-Side; With
Built-In Advantium; With Built-in Microwave
Single Oven
True European Convection with Direct Air
Self-Clean with Steam Clean Option
Variable with Delay Clean Option
Convection Bake; Convection Bake Multi-Rack;
Convection Roast; Convection Broil; Crisp Broil
Thermal Bake; Thermal Broil
Automatic
Dial; Glass Touch; LED
10-Pass Bake Element; 10-Pass Dual Broil Element;
Closed Door Broiling
2 Self-Clean Roller Racks; 1 Self-Clean Heavy-Duty
Rack; 6 Ladder-Rack Positions
Audible Preheat Signal; Auto Recipe Conversion;
C° or F° Programmable; Certified Sabbath Mode
Control Lock Capability; Cook Time; Delay Time;
Electronic Clock & Kitchen Timer; Hi / Low / Crisp
Broil; Mis-Wire Detection; Optional Clock Display;
Temperature Probe; Proof Mode
Built-In
Amazon Alexa; The Google Assistant; IFTTT; Nest;
Drop; Innit; DiGiorno
Convection
3 Halogen Interior Oven Lights; Black Gloss Finish;
Hidden Bake
CAPACITY
Total Capacity (cubic feet)
5.0 cu ft
POWER / RATINGS
Amp Rating at 208V
Amp Rating at 240V
Bake Wattage
Broiler Wattage
Convection Wattage
KW Rating at 208V
KW Rating at 240V
20
20
2850W
4300W; Dual Element
2400W
3.4
4.5
WEIGHTS & DIMENSIONS
Approximate Shipping Weight
Net Weight
Overall Height
Overall Width
Overall Depth
Cabinet Width
Cutout Dimensions (w x h x d) (in.)
Oven Interior Dimensions
(W x H x D) (in.)
208 lb
190 lb
28-5/8 in
29-3/4 in
27-3/4 in
30 in
28-5/8 x 27-5/16 x 23-1/2
25 x 17-3/8 x 20-1/4
MAX.
Café ™ 30" Built-In French-Door
Single Convection Wall Oven
9-1/2" MAX.
CTS90FP4MW2 / CTS90FP3MD1
WARRANTY
Parts warranty
Labor warranty
Warranty notes
Cutout depth
23-1/2" MIN
Limited 1-year entire appliance
Limited 1-year entire appliance
See written warranty for full details
Junction box
F
F location
DIMENSIONS AND INSTALLATION
22" to
9-1/2" MAX.
bottom of
Most 30" Wall Cabinets can be used with this unit.
junction box
Conduit
40"
Note: These ovens are not approved for stackable installations.
E an
Cabinets installed adjacent to wall ovens must have
adhesion spec of at least a 194°F temperature rating.
Door handle protrudes 2-1/2" from door face. Cabinets and
drawers on adjacent 45° and 90° walls should be placed to
avoid interference
with the handle.
Cutout
Conduit28-1/2"
28-5/8"
Cutout depth
23-1/2" MIN40"
E
Junction box
location
F
D
Electric wall ovens are not approved for installation with a
plug and receptacle. They must be hard wired in accordance
with installation instructions.
22" to
bottom of B
junction box
Conduit
40"
E9-1/2" MAX.
Installation Information: Before installing, consult installation
instructions packed with product for ­current dimensional data
and for alternate installation options.
Cutout depth
23-1/2" MIN
Note: This model is not approved for installation below a
F
countertop or in combination with a separate cooktop. The
minimum installation height from the floor is 16-1/4".
Junction box
location
A minimum gap of 14" from either side of the wall oven
to an adjacent 45 or 90 cabinet, drawer or was is required to
avoid interference with the opening of the doors.
The handles
Conduit
protrudedepth
2-1/2"
E from the door face.
Cutout
40"
22" to
bottom of
junction box
23-1/2"
MIN may need to be notched on either side of the
Countertops
D
Cutout wid
28-1/2" MIN
28-5/8" MA
D
A
B
Cutout width
28-1/2" MIN.
28-5/8" MAX.
30
wall oven to avoid interference with the opening of the doors.
Junction box
THIS MODEL IS NOT APPROVED FOR FLUSH-MOUNT
location
D
INSTALLATION
22" to
bottom of
junction box
CL
Cutout width
28-1/2" MIN.
28-5/8" MAX.
A
2 x 4 or
A
equivalent runners
B
level with bottom of cutout
C
and
CL flush with sides of cutout
2
x
4
or
or solid bottom
floor.
equivalent runners
Suitable
bracing
200 lbs.)
to support (must support
Suitable
runners
bracing
B
C
CL
Suitable
bracing
to support (must support 200 lbs.)
runners
30''
Cutout height
27-1/4" MIN.
27-5/16" MAX.
to support (must support 200 lbs.)
runners
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
Recommended
or solidlocation
bottom floor.
cutout
from floor
16-1/4" MIN.
32-1/2" MAX.
Cabinet
A – Overlap of oven at top of cutout
30"
1-1/4"
30''
2 x 4 or
equivalent runners
level with bottom of c
A – Overlap
offlush
oven with
at topsides
of cuto
and
of
B – Overlap
oven
over side
of e
or of
solid
bottom
floor.
level with bottom of cutout
Cabinet
RecommendedC – Overlap of oven at bottom of
and flush with sides of cutout
A – Overlap of oven at top of cutout
cutout
location
or solid bottom floor.
from floor OvenB – Overlap of oven over side of edge
16-1/4" MIN. D – Install
C – Overlap
of oven at bottom of cuto
depth
Suitable
32-1/2" MAX.
bracing
E –Oven
Overall height with trim
D – Install depth
to support (must support 200 lbs.)
F – Overall
width
runners
30''
E – Overall height with trim
Cabinet
A – Overlap of oven at top of cutout
B – Overlap of oven over side of edges of cutout
C – Overlap of oven at bottom of cutout
Oven
D – Install depth
E – Overall height with trim
F – Overall width
For answers to your Café™ product questions,CT9070
visit our website at cafeappliances.com.
C
L
Cutout height
27-1/4" MIN.
27-5/16" MAX.Cabinet
F – Overall width
CT9070
30"
1-1/4"
3/4"
1-1/4"
23-1/2"
28-5/8"
29-3/4"
Café ™ 30" Built-In French-Door
Single Convection Wall Oven
CTS90FP4MW2 / CTS90FP3MD1
DIMENSIONS AND INSTALLATION
Note: This model is not approved for installation below a
countertop or in combination with a separate cooktop. The
minimum installation height from the floor is 16-1/4".
Note: A minimum gap of 14" from either side of the wall oven
to an adjacent 45 or 90 cabinet, drawer or was is required to
avoid interference with the opening of the doors. The handles
protrude 2-1/2" from the door face.
INSTALLATION TO ADJACENT
COUNTERTOP AND
CABINET DOORS
INSTALLATION
TO ADJACENT COUNTERTOP
AND CABINET DOORS
If Y = 0.0” then X = 0.0”
Otherwise,
X = Y + 1.0” (2.5 cm) Min.
Countertop
INSTALLATION
TO ADJACENT COUNTERTO
AND CABINET DOORS
X
Note: Countertops may need to be notched on either
side of the wall oven to avoid interference with the
opening of the doors.
Y
If Y = 0.0” then X = 0.0”
Otherwise,
X = Y + 1.0” (2.5 cm) Min.
Installation information: Before installing, consult installation
instructions packed with products for current dimensional data
and for alternate installation options.
TOP VIEW
THIS MODEL IS NOT APPROVED FOR FLUSH-MOUNT
INSTALLATION
Cabinet Door
16” Min.
Oven Door
Front
Clearance
X
Y
SIDE BY SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
If both ovens are French Door models, then 30” min.
If the second oven is a drop down door model, then 14”
14” Min.
Oven Door Side
Clearance
(Both Sides)
min.
TOP VIEW
9 1/2”
INSTALLATION
ABOVE A COOKTOP
INSTALLATION
ABOVE
2-1/2" MIN
A WALL OVEN
ELEC.
From front edge
of countertop to front
edge of cooktop cutout
SIDE BY SIDE INSTALLATION
SIDE
INSTALLATION
FRONTELEC.
VIEWBY
OFSIDE
CUTOUTS
5 1/4”
1
FRONT VIEW OF CUTOUTS
Oven
Cl
(Bo
Junction box
If both ovens are French Door models, then 30” min.
location
(maysecond
also oven is a drop down door model, then 14” min.
If the
be located in
adjacent cabinet.)
9 1/2”
ELEC.
31-1/4" MIN
ELEC.
5 1/4”
Junction box
location (may also
be located in
adjacent cabinet.)
From top surface
of countertop to
top surface of
wall oven support
platform
ADDITIONAL ACCESSORIES
CXWSFHKPMBZ
Brushed Bronze
2 handles, 2 knobs
(standard on Matte White)
CXWSFHKPMSS
Brushed Stainless
2 handles, 2 knobs
(standard on Matte Black)
CXWSFHKPMBT
Brushed Black
2 handles, 2 knobs
For answers to your Café™ product questions, visit our website at cafeappliances.com.
CXWSFHKPMCU
Brushed Copper
2 handles, 2 knobs
© 2018 GE Appliances
PC90238
07/18
Download PDF

advertising