Faber ORIZ36SS Spec Sheet/ Dimensions (PDF)

Faber ORIZ36SS Spec Sheet/ Dimensions (PDF)
Image Collection
Orizzonte
The art of ventilation
LUXURY STYLING
stainless steel styling
artistic design, impeccable fit & finish
2 halogen bulbs with a dimmmer
hidden dishwasher-safe grease filters
Easy Cube™ Mounting System
18” mounting height for sleek cabinet design
°
°
°
°
°
°
HIGH PERFORMANCE TECHNOLOGY
° Comfort-Panel™ perimetric suction system
° 600 cfm internal PRO™ blower model
° pre-installed Silent Kit™ sound-proofing
STATE OF THE ART CONTROLS
push-button (LED) electronic controls on panel
4 pre-set speeds plus Intensive Power Boost
24-hour kitchen anti-pollution mode
30 minute delayed shut-down mode
grease filter saturation indicator
°
°
°
°
°
DUCTING OPTIONS
Faber has redefined the rangehood with the
new Orizzonte, a patented stainless steel
angled ventilation panel that hangs on the wall
behind the cooking surface.
° top 6 “ round venting
° convertible to ductless
Size/Color/Model #
36 Stainless
a
c
c
e
s
s
o
r
i
e
s
ORIZ36SS
High Ceiling Kit
HIGH1
Electronic LED push button controls
Ductless Conversion Kit
DUCT1
One 40” upper chimney to replace 16
1/8” upper chimney that came with hood
Includes: • Lower Chimney with holes for ducting
• Ductless Diverter Assembly • Vent Grates
• Charcoal Filter
Cfm Reducer Kit
Replacement Charcoal Filter FILTER2
CFMRED
Converts CFM to below 300 for make up
air environments
Remote Control
REMCTRL
p.o. box 435 • Wayland, MA 01778 • tel: (508) 358-5353 • fax: (508) 358-5730 • e-mail: [email protected] • www.faberonline.com
Dimensional Diagrams
Ducted
MIN. 32" - MAX. 38 1/8"
MIN. 26 3/8" - MAX. 37 3/8"
Ductless
Pre-Planning Your Installation - Important: Consult the installation instructions before you begin installing this rangehood.
The suggested height to install the hood above the
cooktop is 18” . The Orizzonte chimneys are adjustable
and designed to meet varying ceiling heights. The
chimneys can be adjusted for ceilings between 7' 10
3/16" - 8' 9 3/16" for ducted installations and between
8’ 3 3/16” - 8’ 9 15/16” for ductless installations.
For shorter ceilings, have the chimney cover(s) cut at
a sheet metal shop. For higher ceiling installations,
the High Ceiling Chimney Kit includes a new 40”
upper chimney which would replace the 16 1/8” upper
chimney that came with the hood.
Pre-Planning Your Installation - Important: Consult the installation
instructions before you begin installing this rangehood.
Make your ductrun as straight and short as possible. The ductrun should not
exceed 35 equivalent feet if ducted with the required minimum of 6” round
duct. Count 45º angles as 3 feet, 90º elbows as 5 feet, and 90º flat elbows as
12 feet.
For best results, use no more than three 90° elbows. Make sure that
there is a minimum of 24” of straight duct between elbows if more than
one is used. Do not install two elbows together. If you must elbow right
away, do it as far away from the hood’s exhaust opening as possible.
WARNING!
Ductless Installations*
For installations where ductwork is impossible or highly impractical, a Ductless
Conversion Kit is available. A charcoal
filter, which attaches under the blower
assembly, absorbs smoke and odors. A
ductless diverter assembly directs the air
out to a lower chimney with vent grates cut
into the sides.
* it is highly recommended that
professional style cooking always be
vented to the outside.
Rev. 07/11
Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this rangehood.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement