Miele | 28236055USA | Operating/Installation Instructions | Miele 28236055USA Operating/Installation Instructions

Operating and Installation Instructions
Ventilation System
To prevent accidents and damage to the appliance, you must read
these instructions before installing the appliance and using it for the first
time.
en-US
M.-Nr. 10 775 160
Contents
IMPORTANT SAFETY INSTRUCTIONS ................................................................ 3
Caring for the environment ................................................................................ 12
Description of functions ..................................................................................... 13
Guide to the appliance ........................................................................................ 14
Operation..............................................................................................................
Turning on the blower............................................................................................
Selecting the power level ......................................................................................
Delayed shut-off ....................................................................................................
Turning off the blower............................................................................................
Turning the overhead lighting on/off......................................................................
Power management ..............................................................................................
Turning power management on/off ..................................................................
Safety shut-off.......................................................................................................
16
16
16
16
16
16
17
17
18
Energy-saving tips............................................................................................... 19
Cleaning and care ...............................................................................................
Stainless steel housing..........................................................................................
Grease filters .........................................................................................................
OdorFree Charcoal Filter .......................................................................................
Disposing of charcoal filters .............................................................................
Changing a light bulb ............................................................................................
20
20
21
23
23
24
Installation............................................................................................................
Before installation..................................................................................................
Installation Instructions .........................................................................................
Installation parts ....................................................................................................
Appliance dimensions ...........................................................................................
Distance between cooktop and ventilation hood (S).............................................
Installation recommendations ...............................................................................
Uneven installation surfaces .................................................................................
25
25
25
26
28
30
31
32
Air venting ............................................................................................................ 33
Reducing Collar .................................................................................................... 34
Electrical connection .......................................................................................... 35
Service and warranty .......................................................................................... 36
Location of the data plate ..................................................................................... 36
MieleCare .............................................................................................................. 36
Technical data ..................................................................................................... 37
2
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
This appliance complies with current safety requirements.
Improper use of the appliance can lead to personal injury and
material damage.
Read all instructions before installing or using the appliance for the
first time. Only use the appliance for its intended purpose.
Keep these operating instructions in a safe place and pass them
on to any future user.
Appropriate use
 CAUTION: For General Ventilating Use Only. Do Not Use To
Exhaust Hazardous Or Explosive Materials And Vapors.
 This appliance is intended for residential use only. Use only as
described in these operating instructions.
 This ventilation hood is not intended for outdoor use.
 It must only be used to extract and clean vapors produced during
cooking. Any other use occurs at the owner's own risk.
 This appliance is suitable for installation above gas or electric
cooking surfaces.
 Persons who lack physical, sensory or mental abilities, or
experience with the appliance should not use it without supervision
or instruction by a responsible person.
3
IMPORTANT SAFETY INSTRUCTIONS
Safety with children
 As with any appliance, close supervision is necessary when used
by children.
 Please supervise children in the vicinity of the hood and do not let
them play with it.
 The LED ClearView lighting is very intense.
Ensure that especially babies/small children don't look into the light.
 Danger of suffocation! Ensure that any plastic wrappings, bags,
etc. are disposed of safely and kept out of the reach of children.
Technical safety
 WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
– Use this appliance only in the manner intended by the
manufacturer. If you have questions, contact Miele.
– Before servicing or cleaning the appliance, switch power off at the
service panel and lock the service disconnecting means to
prevent power from being switched on accidentally. If the service
disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
 Unauthorized installation, maintenance, and repairs can cause
considerable danger for the user. Installation, maintenance, and
repairs must only be carried out by a Miele authorized technician.
 A damaged ventilation hood can be dangerous. Always check for
visible signs of damage. Never use a damaged ventilation hood.
 Be certain your appliance is properly installed and grounded by a
qualified technician. To guarantee the electrical safety of this
appliance, continuity must exist between the appliance and an
effective grounding system. It is imperative that this basic safety
requirement be met. If there is any doubt, have the electrical system
of the house checked by a qualified electrician.
4
IMPORTANT SAFETY INSTRUCTIONS
 Reliable and safe operation of this hood can only be guaranteed if
it has been connected to the electrical supply.
 To avoid damaging the ventilation hood, make sure that the
connection data (voltage and frequency) on the data plate
correspond to the building's power supply before connecting the
appliance.
If in doubt, consult a qualified electrician.
 Do not use a power bar or extension cord to connect the
ventilation hood to electricity. These are a fire hazard and do not
guarantee the required level of appliance safety.
 To ensure safe operation, only use the ventilation hood after it has
been properly installed.
 This ventilation hood may not be used in non-stationary locations
(e.g. on a ship).
 Adequate ventilation must be provided when the hood is operated
simultaneously with devices that burn gas or other fuels.
 Only open the housing as described in the enclosed “Installation
diagram” and in the “Cleaning and care” section of this manual.
Under no circumstances should any other parts of the housing be
opened.
Tampering with electrical connections or components and
mechanical parts is highly dangerous to the user and can cause
operation faults.
 Defective components should be replaced by Miele original parts
only. Only with these parts can the manufacturer guarantee the
safety of the appliance.
 If the power cord is damaged, it must only be replaced by a
qualified service technician.
5
IMPORTANT SAFETY INSTRUCTIONS
 During installation, maintenance, and repair work, the ventilation
hood must be disconnected from the electrical supply. It is only
completely isolated from the electricity supply if one of the following
applies:
– The circuit breakers on the electrical service panel are tripped.
– The screw-type fuses on the electrical service panel have been
removed.
– The power cord (if present) has been unplugged from the socket
(pull the plug not the cord).
Correct use
 WARNING: TO REDUCE THE RISK OF A COOKTOP GREASE
FIRE:
– a) Never leave surface units unattended at high settings. Boilovers
cause smoking and greasy spillovers may ignite. Heat oils slowly
on low or medium settings.
– b) Always turn the hood on when cooking at a high heat.
– c) Clean the ventilation hood frequently. Grease should not be
allowed to accumulate on the fan or filter.
– d) Use the proper pan size. Always use cookware appropriate for
the size of the cooking area.
 Never use an open flame beneath the ventilation hood.
To avoid the risk of fire, do not flambé or grill over an open flame.
When turned on, the ventilation hood will draw any flames into the
filter. Fat deposits may ignite.
 WARNING: TO REDUCE THE RISK OF INJURY TO PERSONS IN
THE EVENT OF A COOKTOP GREASE FIRE, OBSERVE THE
FOLLOWING*:
– a) SMOTHER FLAMES with a close fitting lid, cookie sheet, or
metal tray then turn off the burner. BE CAREFUL TO PREVENT
BURNS. If the flames do not go out immediately, EVACUATE AND
CALL THE FIRE DEPARTMENT.
6
IMPORTANT SAFETY INSTRUCTIONS
– b) NEVER PICK UP A FLAMING PAN - You may be burned.
– c) DO NOT USE WATER, including wet dishcloths or towels - a
violent steam explosion will result.
– d) Use a fire extinguisher ONLY if:
– 1) You have a class ABC extinguisher, and you know how to operate it.
– 2) The fire is small and contained in the area where it started.
– 3) The fire department is being called.
– 4) You can fight the fire with your back to an exit.
*Based on “Kitchen Fire Safety Tips” published by NFPA.
 The ventilation hood may become damaged if exposed to
excessive heat from a gas cooktop.
– When using the ventilation hood over a gas cooktop, ensure that
any burners in use are always covered by cookware. Turn burners
off when removing the cookware, even if doing so for just a short
time.
– Select cookware that is suitable for the size of the burner.
– Adjust the flame so that it never extends up the sides of the
cookware.
– Avoid overheating the cookware (e.g., when cooking with a wok).
 Always turn the ventilation hood on whenever a burner is in use to
prevent damage from condensation.
 Overheated oil and fat can ignite, causing fire damage to the
ventilation system.
Do not leave cookware, pans, and deep fryers unattended when
cooking with oil or fat. Similarly, never leave an open grill unattended
when grilling.
 Fat and debris deposits impair the proper functioning of the
ventilation hood.
To ensure that cooking vapors are properly cleaned, never use the
ventilation hood without the grease filters in place.
7
IMPORTANT SAFETY INSTRUCTIONS
 There is a risk of fire if cleaning is not completed according to the
instructions in this manual.
 Please note that the heat rising from the stovetop during cooking
can cause the ventilation hood to become very hot.
Do not touch the housing or the grease filters until the ventilation
hood has cooled down.
8
IMPORTANT SAFETY INSTRUCTIONS
Proper installation
 WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
– a) Installation work and electrical wiring must be done by qualified
person(s) in accordance with all applicable codes and standards,
including fire-rated construction.
– b) Sufficient air is needed for combustion and exhausting of gases
through the flue (chimney of fuel burning equipment to prevent
back drafting. Follow the heating equipment manufacturer’s
guideline and safety standards such as those published by the
National Fire Protection Association (NFPA) and the American
Society for Heating, Refrigeration and Air Conditioning Engineers
(ASHRAE), and the local code authorities.
– c) When cutting or drilling into the wall or ceiling, do not damage
electrical wiring and other hidden utilities.
– d) Ducted hoods must always be vented to the outdoors.
– e) Do not use this hood with any solid-state speed control device.
 To determine whether a ventilation hood may be operated above
your cooking appliance, please refer to the information provided by
the appliance's manufacturer.
 Safety regulations prohibit the installation of a ventilation hood
over solid fuel stoves.
 An insufficient safety distance between the cooktop and the
ventilation hood can result in damage to the ventilation hood.
The minimum safety distances between the top of the cooktop and
the bottom of the ventilation hood given in the “Installation” section
of this booklet must be observed, unless the cooktop manufacturer
states that a greater safety distance is required.
If more than one cooking appliance is installed beneath the
ventilation hood, and they have different minimum safety distances
to the ventilation hood, select the greater distance.
9
IMPORTANT SAFETY INSTRUCTIONS
 Be sure to observe the information contained in the “Installation”
section when mounting the ventilation hood.
 Metal parts can have sharp edges which may cause injury.
Wear gloves to protect your hands from being cut.
 When installing the exhaust duct, only use pipes or tubes made of
non-flammable material. These can be obtained from your Miele
dealer or from Miele Technical Service.
 Exhaust air should not be vented into a chimney or vent flue which
is otherwise in use and should not be channeled into ducting which
ventilates rooms with fuel-burning installations.
 If exhaust air is to be extracted into a chimney or ventilation duct
no longer used for other purposes, seek professional advice.
 WARNING: TO REDUCE THE RISK OF FIRE USE ONLY METAL
DUCTWORK.
10
IMPORTANT SAFETY INSTRUCTIONS
Cleaning and maintenance
 Never use a steam cleaner to clean the ventilation hood.
The steam can reach the electrical components and cause a short
circuit.
Accessories
 Use only genuine original Miele parts. If parts or accessories from
other manufacturers are used, the warranty will become void.
11
Caring for the environment
Disposal of the packing
material
The cardboard box and packing
materials protect the appliance during
shipping. They have been designed to
be biodegradable and recyclable.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
Disposal of your old appliance
Electrical and electronic appliances
contain valuable materials. They also
contain certain substances, compounds
and components which were essential
for the proper functioning and safe use
of the equipment. Handling these
materials improperly by disposing of
them in your household waste can be
harmful to your health and the
environment. Therefore, please do not
dispose of your old appliance with
regular household waste and follow
local regulations on proper disposal.
Consult with local authorities, dealers or
Miele in order to dispose of and recycle
electrical and electronic appliances.
Miele assumes no responsibility for
deleting any personal data left on the
appliance being disposed. Please
ensure that your old appliance is kept
away from children until removal.
Observe safety requirements for
appliances that may tip over or pose an
entrapment hazard.
12
Description of functions
The following functions are available on
your ventilation hood, depending on the
model:
Vented mode
Recirculation mode
Recirculation mode hoods require a
recirculation kit and OdorFree Charcoal
Filters (available as optional
accessories), see “Technical Data” for
more information.
The air is drawn in and cleaned by the
grease filters and directed outside.
Non-return flap
A non-return flap in the ducting
prevents the exchange of inside and
outside air from occurring when the
ventilation hood is not in use.
The flap is closed when the ventilation
hood is turned off.
When the ventilation hood is turned on,
the non-return flap opens so that the
exhaust air can be transported outside
without any obstruction.
The air is drawn in and cleaned first by
the grease filters and then by the
charcoal filters. The clean air is then
recirculated back into the kitchen.
A non-return flap has been provided
with the hood in case your ducting does
not have one. It is inserted into the
outlet duct collar of the fan.
13
Guide to the appliance
14
Guide to the appliance
a Exhaust connection
Extraction ducting can be directed through the back of the ventilation hood or
upward to the ceiling.
b Overhead lighting
c OdorFree charcoal filters (2 filters)
Optional accessories for recirculation mode
d Grease filters (DA 2360: 1 filter; DA 2390: 2 filters)
e Controls
f On/Off button for the blower
g Buttons for setting the blower power
h On/Off button for the overhead lighting
15
Operation
Turning on the blower
Switch the blower on as soon as you
start cooking. This is to ensure that
vapors are captured right from the start.
 Press the On/Off control .
The blower turns on at level 2. The 
symbol and 2 will light up in the blower
level display.
Selecting the power level
Power levels 1 to 3 are available for light
to heavy cooking vapors and odors.
For strong vapors and odors that are
temporarily produced when cooking,
e.g., during searing, select the B
Booster setting.
 Select the power level you want by
pressing the  or  control.
Reducing power down from the
Booster setting
If power management is activated
(default setting), the blower
automatically switches back to level 3
after 5 minutes.
Delayed shut-off
 It is advisable to run the blower for a
few minutes after cooking has
finished to neutralize any lingering
vapors and odors in the air.
Turning off the blower
 Press the On/Off control  to turn
the blower off.
The  symbol will go out.
16
Turning the overhead lighting
on/off
The overhead lighting can be turned on
and off separately from the blower.
 To do this, press the lighting
control .
The  symbol will light up when the
overhead lighting is turned on.
Operation
Power management
Turning power management on/off
The ventilation hood features a power
management system to help save
energy. The blower power level is
reduced and the lighting is turned off
automatically.
You can deactivate power
management.
Keep in mind that this may increase
energy consumption.
– If the booster level is selected, the
blower automatically switches to
level 3 after 5 minutes.
– If the blower is set to level 3, 2 or 1, it
switches back one blower setting
after 2 hours and then in 30-minute
intervals until the blower eventually
switches off.
– If the overhead lighting is on, it will
switch off automatically after 12
hours.
 To set this option, turn off the fan and
the overhead lighting first.
 Press the  and  buttons at the
same time for approx. 10 seconds,
until 1 lights up.
 Then, press the following buttons in
succession:
– the lighting button ,
– followed by the  button and then
– the lighting button .
If power management is turned on, the
1 and B indicators will be continuously
lit.
If it is turned off, the 1 and B indicators
will flash.
 Press the  button to turn power
management off.
The 1 and B indicators will flash.
 To turn it on, press the  button.
The 1 and B indicators will be
continuously lit.
 Confirm your choice with the On/Off
button .
All the indicator lights will go out.
If the new setting is not confirmed
within 4 minutes, the ventilation system
reverts to the previous setting.
17
Operation
Safety shut-off
If power management has been
deactivated, the ventilation hood will
switch itself off automatically after
12 hours if it has been left on (blower
and overhead lighting).
 To switch it back on, press the On/
Off  control or the lighting
control .
18
Energy-saving tips
This hood operates in a very efficient
and energy-saving manner. The
following will help you to save even
more energy when using it:
– Ensure that there is sufficient
ventilation in the kitchen when
cooking. If there is insufficient air flow
during vented mode, the hood
cannot operate efficiently, causing
increased operating noise levels.
– Always cook with the lowest possible
setting. This produces fewer cooking
vapors so that you can use a lower
hood power level and therefore
benefit from reduced energy
consumption.
– Check the power level selected on
the hood. A lower power level is
generally sufficient for the majority of
cooking. Only use the booster level
when necessary.
– When a large volume of cooking
vapors are being produced, switch to
a high power level in good time. This
is more efficient than operating the
hood for longer to try to capture
cooking vapors that have already
been distributed throughout the
kitchen.
– Make sure that you switch off the
hood after use.
– Clean or change the filters at regular
intervals. Heavily soiled filters reduce
performance, increase the risk of fire
and are unhygienic.
19
Cleaning and care
 WARNING: TO REDUCE THE
RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
 Before cleaning or servicing the
hood, disconnect it from the power
supply, see “IMPORTANT SAFETY
INSTRUCTIONS”.
Stainless steel housing
General information
 The surfaces and control buttons
are susceptible to scratching and
chipping.
Observe the following cleaning
instructions.
 Clean all surfaces and control buttons
using warm water and liquid dish
soap. Apply with a sponge cloth.
 Make sure that no water gets
into the interior of the hood.
Only use a damp cloth to clean the
hood, especially in the control panel
area.
 After cleaning, dry the surfaces with a
soft cloth.
Avoid the following:
– Cleaners containing soda, acid or
chloride, or cleaners containing
solvents
– Abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents.
20
Special instructions for stainless
steel surfaces
(does not apply to control buttons)
 Stainless steel surfaces can also be
cleaned using a non-abrasive
stainless steel cleaner, available from
Miele.
 To prevent the surfaces from quickly
becoming dirty again, we recommend
treating them with a stainless steel
care conditioner.
Apply sparingly over the entire area
using a soft cloth.
Important for the controls
Do not leave dirt and debris on the
buttons for any length of time.
Otherwise they may become
discolored or damaged.
Remove any dirt or debris
immediately.
 Observe the general cleaning
instructions contained in this chapter.
Do not use a stainless steel cleaner
to clean the control buttons.
Cleaning and care
Grease filters
The reusable metal grease filters in the
appliance remove the solid particles
contained in kitchen vapors (grease,
dust, etc.), thereby preventing the
ventilation hood from becoming dirty.
The grease filters must be cleaned at
regular intervals.
Heavily soiled grease filters hinder air
extraction and will lead to increased
levels of soiling in the ventilation hood
and in the kitchen.
 Risk of fire!
Oversaturated grease filters are a fire
hazard.
Clean the grease filters at regular
intervals.
Cleaning intervals
Accumulated grease solidifies over a
longer period of time and makes
cleaning more difficult. The grease
filters should therefore be cleaned every
3 to 4 weeks.
Removing the grease filters
 When handling the grease filter,
be careful not to drop it.
This can result in damage to the filter
and the cooktop below.
Make sure you hold the filter securely
at all times when handling it.
 To remove a grease filter, release the
locking clip. Then, open the filter to a
45° angle, unhook it, and remove it
from the hood.
Cleaning the grease filters by hand
 Clean the filters with a soft nylon
brush in a mild solution of hot water
and dish soap. Do not use undiluted
dish soap.
Unsuitable cleaning agents
Unsuitable cleaners can cause damage
to the filter surfaces if used regularly.
Do not use any of the following:
– Lime removers
– Abrasive powders or abrasive liquids
– Aggressive all-purpose cleaners and
degreaser sprays
– Oven sprays
Cleaning the grease filters in a
dishwasher
 Place the grease filters upright or
slightly inclined in the lower basket.
Ensure the spray arm is not
obstructed.
21
Cleaning and care
 Use a commonly available household
dishwashing detergent.
 In a Miele dishwasher use the
“Normal” program.
Depending on the detergent used,
cleaning the filters in a dishwasher
may cause the inside filter surfaces to
become discolored. However, this will
not affect the functioning of the grease
filters in any way.
After cleaning
 After cleaning, leave the filters on an
absorbent surface to dry.
 When removing the filters for
cleaning, also clean off any
accessible oil or fat buildup from the
housing. Doing so will prevent a fire
hazard.
 Reinstall the grease filters. When
inserting the filters, make sure that
the locking clip is facing down.
 If the filters have been installed
incorrectly, you can insert a small
screwdriver into the slit to disengage
the locking clip.
22
Cleaning and care
OdorFree Charcoal Filter
With recirculation mode, two charcoal
filters must be fitted in addition to the
grease filters. These are designed to
absorb cooking odors.
They are fitted in the canopy above the
grease filters.
Charcoal filters are available to order via
the Miele Web Store, the Miele Spare
Parts Department (see end of this
booklet for contact details) or from your
Miele dealer.
You will need to order a DKF 19-1
charcoal filter set. This set contains
two charcoal filters.
How to install/replace a charcoal
filter
 Before fitting or replacing a charcoal
filter, the grease filters must first be
taken out (see previous section for
instructions on how to do this).
 Fit the charcoal filters into the frame.
 Remove the charcoal filters from their
packaging.
 Reinstall the grease filters.
 Press the filters into the holders.
When to change the OdorFree
Charcoal Filter
 Replace the charcoal filters when
they no longer absorb kitchen odors
effectively.
They should, however, be replaced at
least every 6 months.
Disposing of charcoal filters
 Used charcoal filters can be disposed
of with normal household waste.
23
Cleaning and care
Changing a light bulb
 Turn off the blower and the lighting.
Only use the specified light bulbs.
Other bulbs, for example halogen
bulbs, may become damaged due to
the high generation of heat.
 The light bulbs can get very hot
The light bulbs should be replaced with
the following:
 Disconnect the hood from the
electrical supply before replacing the
light bulbs (see “IMPORTANT
SAFETY INSTRUCTIONS”).
Bulb type .............................. LED, GU10
Power ............................................... 3W
when in use.
Allow the bulbs to cool down for a
few minutes before changing them.
Light bulbs are available from Miele or
specialist dealers.
 Insert the lever supplied into the gap
between the bulb and the bulb
holder..
The bulb will then drop downwards.
 Grip the light bulb, turn it
counterclockwise and take it out.
 Screw the new bulb into the socket
and push it upwards. Please follow
the manufacturer's safety
instructions.
24
Installation
Before installation
 Before installing the appliance,
read all of the information contained
in this chapter and also in the
“IMPORTANT SAFETY
INSTRUCTIONS” section.
Installation Instructions
Please refer to the accompanying
installation sheet for instructions on
how to install the appliance.
Leave these instructions with the
appliance for the consumer/user.
Information is subject to change. Please
refer to our website to obtain the most
current product specification, technical
& warranty information.
The ventilation hood is intended for
installation in wall cabinets, ventilation
housing units, vent flues or above
kitchen islands.
 Before installing, check to make sure
that the top of the appliance will be
accessible once it is installed.
If this is not the case, install the exhaust
ducting and prepare the mains
connection before installation.
25
Installation
Installation parts
26
Installation
a 1 collar for exhaust ducting
 6" (150 mm).
Keep the following in a safe place:
e
ntag tallation aje
gio
nt
Ins
Mo Montag ntering agem
s
nt
Mo
Mo Asennu
Mo
b 1 reducing collar for exhaust
ducting  5" (125 mm).
c Conversion kit for recirculation
mode (not supplied, available as an
optional accessory; see “Technical
data”). The kit contains an exhaust
grille and flexible aluminum hose
with hose clips.
Installation plan
1 lever
For taking the bulbs out.
4 M5 x 1 ⁹/₁₆" (40 mm) screws,
4 washers, 4 M5 nuts for securing the
ventilation system to an interim shelf.
10 M4 x ⁵/₁₆" (8 mm) screws for
securing the ventilation system and
with EXT models for securing flat
ducting and the cover to the casing.
4 M4 x ¹/₂" (12 mm) screws for
additional securing of the ventilation
system to uneven surfaces.
27
Installation
Appliance dimensions
The drawing is not to scale
28
Installation
a The ducting can also be connected at the back.
b The ventilation hood is fastened in the cut-out using clamps. A solid installation
surface, e.g., made of wood, is required. Make sure that the structure can
support the load. Around the clamps, components such as supports and
ducting must be at least 1" (25 mm) from the cut-out.
c Alternatively, the ventilation hood can be secured to four fixing points on an
interim shelf.
d There are additional fixing points on the installation surface.
Installation dimensions will differ if you are using the Miele DAA 6 adapter
29
Installation
Distance between cooktop and ventilation hood (S)
Provided a larger distance is not given by the manufacturer of the cooktop, follow
the minimum safety distances between a cooktop and the bottom of the hood.
Please also observe the information contained in the “IMPORTANT SAFETY
INSTRUCTIONS” section.
Minimum distance S
Cooking appliance
Miele
appliance
Non-Miele
appliance
Electric Cooktops
24" (610 mm)
Electric Barbeques and Fryers
26" (660 mm)
Multiburner Gas Cooktops
≤ 43,000 BTU/hr (12.6 kW),
no burner > 15,000 BTU/hr (4.5 kW).
26" (660 mm)
30" (760 mm)
Multiburner Gas Cooktops
≤ 73,800 BTU/hr (21.6 kW),
no burner > 16,500 BTU/hr (4.8 kW)
30" (760 mm)
Multiburner Gas Cooktops
> 73,800 BTU/hr (21.6 kW),
or one of the burners > 16,500 BTU/hr (4.8 kW)
Not possible
Single Burner Gas Cooktops
≤ 20,500 BTU/hr (6 kW)
26" (660 mm)
30" (760 mm)
Single Burner Gas Cooktops
> 20,500 BTU/hr (6 kW)
≤ 27,600 BTU/hr (8.1 kW)
30" (760 mm)
Single Burner Gas Cooktops
> 27,600 BTU/hr (8.1 kW)
Not possible
30
Installation
Installation recommendations
– Please note that the greater the
distance from the cooktop, the less
effective the hood is at drawing in the
cooking vapors.
– To achieve optimum vapor extraction,
the ventilation system must be
centered over the cooktop, not to the
side or behind.
– The cooktop should be no wider than
the hood. Preferably, it should be
narrower for better extraction.
– The mounting area must be easily
accessible. The ventilation hood
should be easy to reach and
disassemble in case a service call is
necessary. This should be taken into
consideration when planning the
position of cabinetry, shelves,
ceilings or decorative elements in the
vicinity of the ventilation hood.
31
Installation
Uneven installation surfaces
If the installation surface is uneven
making flush installation difficult, the
frame can be realigned.
 Fit the ventilation system as
described on the installation plan.
 Disconnect the ventilation system
from the electrical supply before
replacing the bulbs (see
“IMPORTANT SAFETY
INSTRUCTIONS”).
 Fit one of the screws supplied into
each bulb holder.
 Tighten the screws with a screwdriver
until the frame sits flush with the
installation surface.
Do not overtighten the screws!
 Refit the bulbs.
 Insert the lever supplied into the gap
between the bulb and the bulb
holder.
The bulb will then drop downwards.
 Grip the bulb, turn it
counterclockwise, and take it out.
 Remove all other bulbs in the same
way.
32
Air venting
WARNING: Danger of toxic fumes.
Gas cooking appliances release
carbon monoxide that can be
harmful or fatal if inhaled.
To reduce the risk of fire and to
properly exhaust air, the exhaust
gases extracted by the hood should
be vented outside of the building
only.
Do not vent exhaust air into spaces
within walls or ceilings or in attics,
crawl spaces or garages.
To reduce the risk of fire, only use
metal ductwork.
Please read and follow the
“IMPORTANT SAFETY
INSTRUCTIONS” to reduce the risk
of personal injury. Follow all local
building codes when installing the
hood.
Only use smooth pipes or flexible
duct hoses made from noncombustible materials for exhaust
ductwork.
To achieve the greatest possible air
extraction with the lowest noise levels,
please note the following:
– The diameter of the exhaust duct
should not be less than 6" (150 mm).
– If flat exhaust ducts are used, the
cross section should not be smaller
than that of the exhaust connector.
– The exhaust duct should be as short
and straight as possible.
– Make sure that all connections are
secure and airtight.
Remember that any constriction of
the airflow will reduce extraction
performance and increase operating
noise.
 If the exhaust duct is to be routed
through an outside wall, we
recommend installing a telescopic
wall vent or a rooftop vent (available
as an optional accessory).
 If the exhaust air is conveyed into an
exhaust air chimney, the inlet
connector must face the flow
direction.
 When installing the exhaust duct
horizontally, a minimum slope of ¹/₈
inch per foot must be maintained to
prevent condensate from flowing into
the ventilation hood.
 If the exhaust duct is to be routed
through cool rooms, ceilings, etc., the
temperatures in these different areas
may differ greatly. Therefore water
condensation must be considered
and the exhaust duct will need to be
insulated.
– If elbows are needed, make sure they
have a large radius.
– The exhaust duct itself must not be
kinked or compressed.
33
Air venting
Reducing Collar
(optional accessory)
If you would like to reduce the
environmental impact of your ventilation
system by limiting the CFM output the
Reducing Collar can be installed. It
reduces the air flow to less than
400 CFM. Check local building codes
for max. CFM requirements.
 Push the Reducing Collar on the
exhaust port of the blower.
 Push the exhaust hose over it.
 Secure both with a hose clamp.
34
Electrical connection
WARNING: TO REDUCE THE RISK
OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
All electrical work should be
performed by a qualified electrician
in strict accordance with national
regulations (for USA: ANSI-NFPA 70)
and local safety regulations.
Installation, repairs and other work
by unqualified persons could be
dangerous.
Ensure that power to the appliance is
OFF while installation or repair work
is performed.
Verify that the voltage, load and
circuit rating information found on
the data plate (located behind the
baffle filters), match the household
electrical supply before installing the
hood.
Use only with ventilation hood cordconnection kits that have been
investigated and found acceptable
for use with this model hood.
If there is any question concerning
the electrical connection of this
appliance to your power supply,
please consult a licensed electrician
or call Miele’s Technical Service
Department.
Grounding Instructions
WARNING - Improper grounding can
result in a risk of electric shock.
This appliance must be grounded. In
the event of an electrical short circuit,
grounding reduces the risk of electric
shock by providing a path of least
resistance. This appliance is equipped
with a cord having a grounding wire
with a grounding plug.
If there is any doubt, have the electrical
system of the house checked by a
qualified electrician.
Do not use an extension cord. If the
power supply cord is too short, have a
qualified electrician install an outlet near
the appliance.
 The plug must be plugged into an
outlet that is properly installed and
grounded.
WARNING - Grounding instructions
(Canada)
The grounding-type attachment plug
shall be connected to a groundingtype receptacle installed in
accordance with CSA C22.1-12,
Canadian Electrical Code, Part I.
WARNING: THIS APPLIANCE MUST
BE GROUNDED
35
Service and warranty
For faults that you cannot resolve on
your own, please contact your Miele
dealer or Miele Technical Service.
MieleCare
The telephone number for Miele is listed
at the back of these instructions.
MieleCare, our Extended Service
Contract program, gives you the
assurance of knowing that your
appliance investment is covered by
5 years of worry free ownership.
MieleCare is the only Extended Service
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory trained professionals can
guarantee the safety, reliability, and
longevity of your Miele appliance.
When contacting Miele, please state the
model and serial number of your
ventilation hood.
These can be found on the data plate.
Location of the data plate
The data plate is visible once you have
removed the grease filters.
Warranty
For further information, please refer to
your warranty booklet.
This service is available in USA only.
Please note that unless expressly
approved in writing by Miele’s Service
department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit us
online at:
www.mieleusa.com
36
Technical data
Blower motor
350 W
Overhead lighting
DA 2360
2x3W
DA 2390
4x3W
Total connected load
DA 2360
356 W
DA 2390
362 W
Supply voltage, frequency
Fuse
Power cord length
120 V AC, 60 Hz
15 A
2.5 ft (0.75 m)
Weight
DA 2360
24.2 lbs (11 kg)
DA 2390
28.6 lbs (13 kg)
Optional accessories for recirculation mode
DUU 150 or DUU 151 conversion kit and DKF 19-900 charcoal filter set. The set
contains two charcoal filters.
37
Please have the model and serial number
of your appliance available when
contacting Technical Service.
U.S.A.
Canada
Miele, Inc.
Importer
Miele Limited
National Headquarters
9 Independence Way
Princeton, NJ 08540
Phone: 800-843-7231
609-419-4298
Fax:
www.mieleusa.com
Technical Service & Support
Phone: 800-999-1360
888-586-8056
Fax:
TechnicalService@mieleusa.com
International Headquarters
Miele & Cie. KG
Carl-Miele-Straße 29
33332 Gütersloh
Germany
Headquarters and Miele Centre
161 Four Valley Drive
Vaughan, ON L4K 4V8
www.miele.ca
Customer Care Centre
Phone: 800-565-6435
905-532-2272
customercare@miele.ca
DA 2360
DA 2390
en-US
M.-Nr. 10 775 160 / 04
Download PDF

advertising