Miele | 28428654USA | PUR 88 W Specification Sheet | Miele 28428654USA PUR 88 W Specification Sheet

30” Wall Ventilation Hood
PUR 88 W
8mieleusa.com
Specification Sheets TRS 08142017
30” Wall Ventilation Hood
PUR 88 W
SPECIFICATIONS
PUR 88 W — Item 28428654USA
Overall Unit Width
267/16” (748 mm)
Overall Unit Height - Vented
2615/16” (685 mm) - 399/16” (1005 mm)
Overall Unit Height - Recirculated
321/16” (815 mm) - 4411/16” (1135 mm)
Overall Unit Depth
1911/16” (500 mm)
Fan
Fan Speeds
4, Including Intensive setting
Maximum CFM
625 CFM, (Reducing Collar is available to
reduce air flow to less than 400 CFM)
Duct
Recommended Duct Diameter
6” (150 mm)
Electrical
PUR 88 W
Features:
• Front mounted backlit controls
• LED ClearView lighting
• Stainless steel finish
• Polished stainless steel logo
• Automatic shut-off of intensive level,
programmable for 10 minutes
• Removable dishwasher-safe stainless
steel grease filter
• Four fan speeds (incl. intensive)
Electrical Requirements
120V, 60Hz,15A
Power Cord
Molded NEMA 5-15 plug, 4’ 11” (1.5 m)
Shipping
Shipping Weight
-- lbs (-- kg)
Shipping Dimensions
---/-” W x --” H x --” D
Support
Call Miele
(800) 999-1360
Miele Website
8www.mieleusa.com
20/20 Link
82020technologies.com
Installation Accessories:
R2000
DUW 20
DKF12-900
Reducing collar limits air
flow to less than 400 CFM
Installation kit for
recirculation mode
OdorFree Charcoal filter
required accessory for
recirculation mode
PUR 88 W
Page 2 of 7
Specification Sheets TRS 08142017
30” Wall Ventilation Hood
PUR 88 W
INSTALLATION SPECIFICATIONS
PUR 88 W
Page 3 of 7
Specification Sheets TRS 08142017
30” Wall Ventilation Hood
PUR 88 W
INSTALLATION SPECIFICATIONS
Mounting Details
•
•
•
Center unit over cooking surface
Distances “S” is determined by the cooking surface. See “Distance between cooktop and hood (S)” dimensions.
If studs are not available in the required locations, a plywood backing (min. 1/2” (13 mmm)) MUST be used to
reinforce support. Reinforcing material should be affixed to structural wall members. Failure to adequately
support the weight as stated may result in the ventilation system falling off the wall, causing personal injury
and property damage.
PUR 88 W
Page 4 of 7
Specification Sheets TRS 08142017
30” Wall Ventilation Hood
PUR 88 W
INSTALLATION SPECIFICATIONS
Distance Between Cooktop and
Ventilation Hood (S)
PUR 88 W
Page 5 of 7
Specification Sheets TRS 08142017
30” Wall Ventilation Hood
PUR 88 W
INSTALLATION SPECIFICATIONS
Recirculation Kit DUW 20
For Recirculation mode conversion kit DUW 20 is required.
PUR 88 W
Page 6 of 7
Specification Sheets TRS 08142017
30” Wall Ventilation Hood
PUR 88 W
Reducing Collar
(Optional Accessory)
If you would like to reduce the enviromental impact of your ventilation
system by limiting the CFM output the Reducing Collar can be installed.
It reduces the air flow to less than 400 CFM. Check local building codes
for maximum CFM requirements.
PUR 88 W
Page 7 of 7
Specification Sheets TRS 08142017
Download PDF

advertising