Whirlpool WEE510S0FS Use and Care

Whirlpool WEE510S0FS Use and Care
ELECTRIC RANGE
ELECTRIC
RANGE
USER
INSTRUCTIONS
USER INSTRUCTIONS
THANK YOU for purchasing this high-quality product. Register your range at www.whirlpool.com.
For future reference, please make a note of your product model and serial numbers. These can be found on the label
located on the upper-right corner of the front frame.
Model Number_______________________________________
Serial Number________________________________________
Para una versión de estas instrucciones en español, visite www.whirlpool.com.
Para referencia futura, tome nota de los números de modelo y de serie de su producto. Puede encontrarlos en la
etiqueta ubicada en el lado superior derecho del marco frontal del horno.
Table of Contents
RANGE SAFETY...........................................................................2
The Anti-Tip Bracket..................................................................2
FEATURE GUIDE..........................................................................4
COOKTOP USE............................................................................6
Cookware...................................................................................7
Home Canning...........................................................................8
OVEN USE....................................................................................9
Electronic Oven Controls...........................................................9
Sabbath Mode.........................................................................10
Keep Warm..............................................................................10
Aluminum Foil..........................................................................11
Positioning Racks and Bakeware............................................11
Oven Vent................................................................................11
Baking and Roasting...............................................................11
Broiling.....................................................................................12
Cook Time...............................................................................12
RANGE CARE.............................................................................13
Self-Cleaning Cycle.................................................................13
General Cleaning.....................................................................14
Oven Light...............................................................................15
TROUBLESHOOTING................................................................16
ACCESSORIES...........................................................................18
WARRANTY................................................................................19
W10887091B
RANGE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
DANGER
You can be killed or seriously injured if you don't follow
instructions.
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
The Anti-Tip Bracket
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without
the anti-tip bracket fastened down properly.
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Verify the anti-tip bracket has been properly installed and engaged per installation instructions.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed and engaged.
Failure to follow these instructions can result in death or serious burns to children and adults.
To verify the anti-tip bracket is installed and engaged:
Anti-Tip
Bracket
• Slide range forward.
• Look for the anti-tip bracket securely attached to floor or wall.
• Slide range back so rear range foot is under anti-tip bracket.
Range Foot
• See installation instructions for details.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
2
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the range, follow
basic precautions, including the following:
■ WARNING: TO REDUCE THE RISK OF TIPPING OF
THE RANGE, THE RANGE MUST BE SECURED BY
PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK
IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE
RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET
SECURELY ATTACHED TO FLOOR OR WALL, AND
SLIDE RANGE BACK SO REAR RANGE FOOT IS
UNDER ANTI-TIP BRACKET.
■ CAUTION: Do not store items of interest to children in
cabinets above a range or on the backguard of a range –
children climbing on the range to reach items could be
seriously injured.
■ Proper Installation – Be sure the range is properly installed
and grounded by a qualified technician.
■ Never Use the Range for Warming or Heating the Room.
■ Do Not Leave Children Alone – Children should not be left
alone or unattended in area where the range is in use.
They should never be allowed to sit or stand on any part of
the range.
■ Wear Proper Apparel – Loose-fitting or hanging garments
should never be worn while using the range.
■ User Servicing – Do not repair or replace any part of the
range unless specifically recommended in the manual. All
other servicing should be referred to a qualified technician.
■ Storage in or on the Range – Flammable materials should
not be stored in an oven or near surface units.
■ Do Not Use Water on Grease Fires – Smother fire or flame
or use dry chemical or foam-type extinguisher.
■ Use Only Dry Potholders – Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
■ DO NOT TOUCH SURFACE UNITS OR AREAS NEAR
UNITS – Surface units may be hot even though they are
dark in color. Areas near surface units may become hot
enough to cause burns. During and after use, do not touch,
or let clothing or other flammable materials contact surface
units or areas near units until they have had sufficient time
to cool. Among those areas are the cooktop and surfaces
facing the cooktop.
■ Use Proper Pan Size – The range is equipped with one or
more surface units of different size. Select utensils having
flat bottoms large enough to cover the surface unit heating
element. The use of undersized utensils will expose a
portion of the heating element to direct contact and may
result in ignition of clothing. Proper relationship of utensil to
burner will also improve efficiency.
■ Never Leave Surface Units Unattended at High Heat
Settings – Boilover causes smoking and greasy spillovers
that may ignite.
■ Make Sure Reflector Pans or Drip Bowls Are in Place –
Absence of these pans or bowls during cooking may
subject wiring or components underneath to damage.
Protective Liners – Do not use aluminum foil to line surface
unit drip bowls or oven bottoms, except as suggested in
the manual. Improper installation of these liners may result
in a risk of electric shock, or fire.
■ Glazed Cooking Utensils – Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for range-top service without breaking
due to the sudden change in temperature.
■ Utensil Handles Should Be Turned Inward and Not Extend
Over Adjacent Surface Units – To reduce the risk of burns,
ignition of flammable materials, and spillage due to
unintentional contact with the utensil, the handle of a
utensil should be positioned so that it is turned inward, and
does not extend over adjacent surface units.
■ Do Not Soak Removable Heating Elements – Heating
elements should never be immersed in water.
■ Do Not Cook on Broken Cooktop – If cooktop should
break, cleaning solutions and spillovers may penetrate the
broken cooktop and create a risk of electric shock. Contact
a qualified technician immediately.
■ Clean Cooktop With Caution – If a wet sponge or cloth is
used to wipe spills on a hot cooking area, be careful to
avoid steam burn. Some cleaners can produce noxious
fumes if applied to a hot surface.
■ Use Care When Opening Door – Let hot air or steam
escape before removing or replacing food.
■ Do Not Heat Unopened Food Containers – Build-up of
pressure may cause container to burst and result in injury.
■ Keep Oven Vent Ducts Unobstructed.
■ Placement of Oven Racks – Always place oven racks in
desired location while oven is cool. If rack must be moved
while oven is hot, do not let potholder contact hot heating
element in oven.
■ DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN – Heating elements may be hot even
though they are dark in color. Interior surfaces of an oven
become hot enough to cause burns. During and after use,
do not touch, or let clothing or other flammable materials
contact heating elements or interior surfaces of oven until
they have had sufficient time to cool. Other surfaces of the
appliance may become hot enough to cause burns – among
these surfaces are oven vent openings and surfaces near
these openings, oven doors, and windows of oven doors.
For self-cleaning ranges –
■ Do Not Clean Door Gasket – The door gasket is essential
for a good seal. Care should be taken not to rub, damage,
or move the gasket.
■ Do Not Use Oven Cleaners – No commercial oven cleaner
or oven liner protective coating of any kind should be used
in or around any part of the oven.
■ Clean Only Parts Listed in Manual.
■ Before Self-Cleaning the Oven – Remove broiler pan and
other utensils.
For units with ventilating hood –
■ Clean Ventilating Hoods Frequently – Grease should not
be allowed to accumulate on hood or filter.
■ When flambeing foods under the hood, turn the fan on.
■
SAVE THESE INSTRUCTIONS
3
FEATURE GUIDE
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Frequently Asked
Questions section of our website at www.whirlpool.com for more detailed instructions.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
KEYPAD
FEATURE
INSTRUCTIONS
CLOCK
Clock
The Clock uses a 12-hour cycle.
1. Check that the oven is OFF.
2. Press CLOCK.
3. Press Temp/Time “up” or “down” arrow keypad to set the hours. Press CLOCK to
switch to the minutes. Press Temp/Time “up” or “down” arrow keypad to set the
minutes.
4. Press CLOCK or START.
LIGHT
Oven cavity light
While the oven door is closed, press LIGHT to turn the light on and off. The oven light will
come on when the oven door is opened. The oven light will not come on during the SelfCleaning cycle.
TIMER SET/OFF
Oven timer
The Timer can be set in hours or minutes up to 9 hours and 59 minutes.
1. Press TIMER SET/OFF.
2. Press Temp/Time “up” or “down” arrow keypad to set the length of time.
3. Press START to begin the countdown. If enabled, end-of-cycle tones will sound at end
of countdown.
4. Press TIMER SET/OFF to cancel the Timer. Do not press CANCEL because the oven
will turn off.
START
Cooking start
The Start keypad begins any oven function. If Start is not pressed within 10 seconds,
a tone will sound and Start will blink until pressed or canceled. If Start is not pressed
within 30 seconds after pressing a keypad, the function is canceled and the time of day is
displayed.
CANCEL
Range function
The Cancel keypad stops any function except the Timer and Oven Control Lockout.
TEMP/TIME
Temperature and
time adjust
The Temp/Time “up” and “down” arrow keypads are used to adjust time and temperature
settings.
BAKE
Baking and
roasting
1. Press BAKE.
2. Press Temp/Time “up” or “down” arrow keypad until desired temperature is reached.
A tone will sound if the minimum or maximum temperature is reached.
3. Press START.
4. To change the temperature, repeat Step 2. Press START.
5. Press CANCEL when finished.
NOTE: The convection fan will shut off when the oven door is opened. If the oven door
remains open for too long, the heating elements will shut off until the oven door is closed.
All timers, including any active Cook Time or Timed Cook functions, will continue to count
down.
CLEAN
(on some models)
Self-Cleaning
cycle
See the “Self-Cleaning Cycle” section.
4
KEYPAD
FEATURE
INSTRUCTIONS
FROZEN BAKE
Prepackaged
food
1. Position the food on a flat rack in the oven on rack position 3. See the “Positioning
Racks and Bakeware” section.
NOTE: Cook only 1 package of frozen food at a time when using Frozen Bake™
Technology.
2. Press FROZEN BAKE LASAGNA or PIZZA.
3. Press the Temp/Time “up” or “down” arrow keypad to set the temperature as
recommended on the food packaging.
4. Press COOK TIME.
5. Press the Temp/Time “up” or “down” arrow keypad to set the maximum cook time as
recommended on the food packaging.
6. Press START. The range will calculate the best cook time based on the current oven
temperature.
NOTE: The cook time that appears in the display is the estimated required cook time
as calculated by the oven control. It may be different than the time you entered. A
beep will alert you to check the food’s doneness with at least 2 minutes remaining on
the timer. To add more time, press the “up” arrow keypad and press START. The time
entered is added to the remaining time
7. Press START to start the calculated time.
8. At the end of the cook time, a beep will alert you to check the food’s doneness. To
add more time, press the “up” arrow keypad and press START. Unless more time is
selected, the bake element turns off.
9. Press CANCEL when finished.
NOTE: The convection fan will shut off when the oven door is opened. If the oven door
remains open for too long, the heating elements will shut off until the oven door is closed.
All timers, including any active Cook Time or Timed Cook functions, will continue to count
down.
BROIL
Broiling
1. Position cookware in oven and close the oven door.
2. Press BROIL.
3. Press Temp/Time “up” or “down” arrow keypad until the desired temperature is
reached. A tone will sound if the minimum or maximum temperature is reached.
4. Press START.
5. To change the temperature, repeat Step 3. Press START.
6. Press CANCEL when finished.
NOTE: The convection fan will shut off when the oven door is opened. If the oven door
remains open for too long, the heating elements will shut off until the oven door is closed.
All timers, including any active Cook Time or Timed Cook functions, will continue to count
down.
KEEP WARM
Hold warm
Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.
2. Temperature is set at 170°F (75°C). Press the Temp/Time “up” or “down” arrow keypad
until desired temperature is reached. A tone will sound if the minimum or maximum
temperature is reached.
3. Press START.
4. Press CANCEL when finished.
NOTE: The convection fan will shut off when the oven door is opened. If the oven door
remains open for too long, the heating elements will shut off until the oven door is closed.
All timers, including any active Cook Time or Timed Cook functions, will continue to count
down.
DELAY
Delayed start
The Delay keypad is used to enter the starting time for an oven function with a delayed
start. Delay should not be used for foods such as breads and cakes because they may not
bake properly.
To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.
COOK TIME
Timed cooking
Cook Time allows the oven to be set to turn on at a certain time of day, cook for a set
length of time, and/or shut off automatically.
To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.
CONTROL LOCK
hold 3 sec
Oven and
cooktop control
lockout
1.
2.
3.
4.
Check that the oven and cooktop are OFF.
Press and hold CONTROL LOCK for 3 seconds.
A tone will sound and a lock will be displayed.
Repeat to unlock. No keypad will function with the controls locked.
NOTE: The control lock cannot be activated or deactivated while the Hot Surface
indicator light is on. Wait for the Hot Surface indicator light to turn off before activating
or deactivating the control lock.
5
COOKTOP USE
WARNING
■■
To avoid scratches, do not slide cookware or bakeware
across the cooktop. Aluminum or copper bottoms and rough
finishes on cookware or bakeware could leave scratches or
marks on the cooktop.
■■
Do not cook popcorn in prepackaged aluminum containers
on the cooktop. They could leave aluminum marks that
cannot be removed completely.
■■
To avoid damage to the cooktop, do not allow objects that
could melt, such as plastic or aluminum foil, to touch any
part of the entire cooktop.
■■
To avoid damage to the cooktop, do not use the cooktop as
a cutting board.
■■
Use cookware about the same size as the surface cooking
area. Cookware should not extend more than 1/2" (1.3 cm)
outside the area.
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
B
A
C
A. Surface cooking area
B. Cookware/canner
C. 1/2" (1.3 cm) maximum overhang
REMEMBER: When range is in use or (on some models)
during the Self-Cleaning cycle, the entire cooktop area may
become hot.
■■
Use flat-bottomed cookware for best heat conduction and
energy efficiency. Cookware with rounded, warped, ribbed,
or dented bottoms could cause uneven heating and poor
cooking results.
■■
Determine flatness by placing the straight edge of a ruler
across the bottom of the cookware. While you rotate the
ruler, no space or light should be visible between it and the
cookware.
■■
Cookware designed with slightly indented bottoms or small
expansion channels can be used.
■■
Make sure the bottoms of pots and pans are clean and dry
before using them. Residue and water can leave deposits
when heated.
■■
To avoid damage to the cooktop, do not cook foods directly
on the cooktop.
IMPORTANT: When cooktop is in use, the Self-Cleaning cycle
will be disabled. When the Self-Cleaning cycle is in use, the
cooktop will be locked.
Ceramic Glass (on some models)
The surface cooking area will glow red when an element is ON.
Some parts of the surface cooking area may not glow red when
an element is ON. This is normal operation. It will also randomly
cycle off and back on again, even while on High, to keep the
cooktop from extreme temperatures.
It is normal for the surface of light colored ceramic glass to
appear to change color when surface cooking areas are hot.
As the glass cools, it will return to its original color.
Clean the cooktop after each use to help avoid scratches,
pitting, abrasions and to condition the glass surface. Ceramic
glass cooktop cleaner and a cooktop scraper are also
recommended for stubborn soils. Do not use abrasive cleaners,
cleaning pads, or harsh chemicals for cleaning. The Cooktop
Care Kit Part Number 31605 contains all of the items needed to
clean and condition your ceramic glass cooktop. Refer to the
“Range Care” section for additional information.
IMPORTANT: To avoid permanent damage to the cooktop
surface and to make soils easier to remove, clean the cooktop
after each use to remove all soils.
■■
Avoid storing jars or cans above the cooktop. Dropping
a heavy or hard object onto the cooktop could crack the
cooktop.
■■
To avoid damage to the cooktop, do not leave a hot lid on
the cooktop. As the cooktop cools, air can become trapped
between the lid and the cooktop and the ceramic glass could
break when the lid is removed.
■■
For foods containing sugar in any form, clean up all spills
and soils as soon as possible. Allow the cooktop to cool
down slightly. Then, while wearing oven mitts, remove the
spills using a scraper while the surface is still warm. If sugary
spills are allowed to cool down, they can adhere to the
cooktop and can cause pitting and permanent marks.
6
Ceramic Glass Cooktop Cleaning (on some models)
Clean the cooktop after each use to help avoid scratches,
pitting, abrasions and to condition the glass surface. Ceramic
glass cooktop cleaner and a cooktop scraper are also
recommended for stubborn soils. Do not use abrasive cleaners,
cleaning pads, or harsh chemicals for cleaning. The Cooktop
Care Kit Part Number 31605 contains all of the items needed to
clean and condition your ceramic glass cooktop. Refer to the
“Range Care” section for additional information.
IMPORTANT: To avoid permanent damage to the cooktop
surface and to make soils easier to remove, clean the cooktop
after each use to remove all soils.
Cooktop On Indicator Light
Melt Cooking Element
The Cooktop On indicator light is located on the display panel.
When any cooktop element on the console panel is turned on,
the Cooktop On indicator light will glow.
The Melt cooking element offers flexibility due to a wide range of
settings between High and Melt. The High heat option can be
used to boil small amounts of liquid quickly. The lowest setting
can be used to prepare sauces and to keep foods at a low
temperature. Use cookware appropriate in size for the Melt
element.
Hot Surface Indicator Light
On ceramic glass models, the Hot Surface indicator light is
located on the display panel.
The Hot Surface indicator light will glow as long as any surface
cooking area is too hot to touch, even after the surface cooking
area is turned off.
The control lock cannot be turned on or off while the Hot Surface
indicator light is on. Wait for the Hot Surface indicator light to
turn off before turning the control lock on or off.
Coil Elements and Burner Bowls (on some models)
Coil elements should be level for optimal cooking results. Burner
bowls, when clean, reflect heat back to the cookware. They also
help catch spills.
Cookware should not extend more than 1/2" (1.3 cm) over the
coil element. If cookware is uneven or too large, it can produce
excess heat, causing the burner bowl to change color.
To reduce the power setting to Melt, press the “down” arrow for
the Melt element until “Melt” appears in the display.
Dual Zone Cooking Element (on some models)
The Dual Zone Cooking Element offers flexibility depending on
the size of the cookware. Single size can be used in the same
way as a regular element. The dual size combines both the
single and outer elements and is recommended for larger size
cookware.
1. Press ON/OFF for the desired Dual Zone element.
2. Press SIZE to select dual element and a picture of the dual
element will appear.
3. Press the “up” and “down” element arrow keypads to adjust
the heating element to the desired level.
4. To switch back to the single element, press SIZE.
5. Press ON/OFF for the selected element to turn the
element off.
A
A. Dual cooking element
Cookware
IMPORTANT: Do not leave empty cookware on a hot surface
cooking area, element, or surface burner.
Ideal cookware should have a flat bottom, straight sides, and a
well-fitting lid, and the material should be of medium-to-heavy
thickness.
Rough finishes may scratch the cooktop. Aluminum and
copper may be used as a core or base in cookware. However,
when used as a base, they can leave permanent marks on the
surfaces.
Cookware material is a factor in how quickly and evenly heat
is transferred which affects cooking results. A nonstick finish
has the same characteristics as its base material. For example,
aluminum cookware with a nonstick finish will take on the
properties of aluminum.
Cookware with nonstick surfaces should not be used under
the broiler.
Check for flatness by placing the straight edge of a ruler across
the bottom of the cookware. While you rotate the ruler, no space
or light should be visible between it and the cookware.
1
2
3
1
4
5
2
6
7
8
3
9
10
4
11
12
5
13
14
15
6
16
17
18
7
19
20
7
Use the following chart as a guide for cookware material
characteristics.
COOKWARE
CHARACTERISTICS
Aluminum
■■
Heats quickly and evenly.
■■
Suitable for all types of cooking.
■■
Medium or heavy thickness is best for
most cooking tasks.
■■
May leave aluminum residues
which may be diminished if cleaned
immediately after cooking.
■■
Heats slowly and evenly.
■■
Good for browning and frying.
■■
Maintains heat for slow cooking.
■■
Rough edges or burrs may scratch
the cooktop.
■■
Follow manufacturer’s instructions.
■■
Heats slowly, but unevenly.
■■
Ideal results on low-to-medium heat
settings.
■■
May scratch the cooktop.
■■
Heats very quickly and evenly.
■■
May leave copper residues which may
be diminished if cleaned immediately
after cooking.
■■
Can leave a permanent stain or bond
to the cooktop if overheated.
■■
Follow manufacturer’s instructions.
■■
Use on low heat settings.
■■
May scratch the cooktop.
Porcelain
enamel-onsteel or cast
iron
■■
See stainless steel or cast iron.
■■
Porcelain enamel bakeware without
the metal base may bond to the
cooktop if overheated.
Stainless steel
■■
Heats quickly, but unevenly.
■■
A core or base of aluminum or copper
on stainless steel provides even
heating.
Cast iron
Ceramic or
Ceramic glass
Copper
Earthenware
Use flat-bottomed cookware for best cooking results and energy
efficiency. The cookware should be about the same size as the
cooking area outlined on the cooktop. Cookware should not
extend more than 1/2" (13 mm) outside the area.
8
Home Canning
Canning can be performed on a glass smooth-top cooking
surface or traditional coil element cooktop. When canning
for long periods, alternate the use of surface cooking areas
or elements between batches. This allows time for the most
recently used areas to cool.
■■
Center the canner on the largest surface cooking area or
element. On electric cooktops, canners should not extend
more than 1/2" (13 mm) beyond the surface cooking area or
element.
■■
Do not place canner on 2 surface cooking areas or elements
at the same time.
■■
On ceramic glass models, use only flat-bottomed canners to
avoid damage to the cooktop and elements.
■■
For more information, contact your local agricultural
extension office or refer to published home canning guides.
Companies that manufacture home canning products can
also offer assistance.
OVEN USE
Odors and smoke are normal when the oven is used the first few
times or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off. Exposure to the fumes may result in death
to certain birds. Always move birds to another closed and
well-ventilated room.
NOTE: The convection fan will shut off when the oven door is
opened. If the oven door remains open for too long, the heating
elements will shut off until the oven door is closed. All timers,
including any active Cook Time or Timed Cook functions, will
continue to count down.
Electronic Oven Controls
Control Display
Tones
The display will flash when powered up or after a power loss.
Press CANCEL to clear. When oven is not in use, the time of day
is displayed.
Tones are audible signals, indicating the following:
Fahrenheit and Celsius
The temperature is preset to Fahrenheit but can be changed
to Celsius.
To change: Press and hold the Temp/Time “up” arrow keypad
for 5 seconds. “°C” or “°F” will appear on the display. Repeat to
change back.
To exit mode, press CANCEL.
Keypress Tones
Activates or turns off the tones when a keypad is pressed.
To change: Press and hold LIGHT for 5 seconds. Repeat to
change back.
To exit mode, press CANCEL.
Demo Mode
IMPORTANT: This feature is intended for use on the sales floor
with 120 V power connection and permits the control features
to be demonstrated without heating elements turning on. If this
feature is activated, the oven will not work.
To change: Press CANCEL, CANCEL, Temp/Time “up” arrow
keypad, TIMER SET/OFF. Repeat to change back and end
Demo mode.
Basic Functions
One Tone
■■
Valid keypad press
■■
Oven is preheated (long tone)
■■
Function has been entered
Reminder, repeating every 20 seconds after the
end-of-cycle tones
Three Tones
■■
Invalid keypad press
Four Tones
■■
■■
End of cycle
Oven Temperature Control
IMPORTANT: Do not use a thermometer to measure oven
temperature. Elements will cycle on and off as needed to provide
consistent temperature but may run slightly hot or cool at any
point in time due to this cycling. Most thermometers are slow
to react to temperature change and will not provide an accurate
reading due to this cycling.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature can
be adjusted to personalize it for your cooking needs. It can be
changed in Fahrenheit or Celsius.
To Adjust Oven Temperature:
1. Press and hold the Temp/Time “down” arrow keypad for
5 seconds until the oven display shows the current setting,
for example “0°F CAL” or “00.”
2. Press the Temp/Time “up” or “down” arrow keypad to
increase or to decrease the temperature in 5°F (3°C)
amounts. The adjustment can be set between 30°F (18°C)
and -30°F (-18°C).
3. Press START.
9
Sabbath Mode
(on some models)
The Sabbath mode sets the oven to remain on in a Bake setting
until turned off. A Timed Bake can also be set to keep the oven
on for only part of the Sabbath. The Oven Control Lockout
feature (if present) will be disabled during the Sabbath mode.
After the Sabbath mode is set, no tones will sound, the display
will not show the temperature, the Kitchen Timer mode will be
canceled (if active), and only the following keypads will function:
■■
Temp/Time “up” and “down” arrow keypads
Cancel
When the oven door is opened or closed, the oven light will not
turn on or off and the heating elements will not turn on or off
immediately.
When power is restored after a power failure, the oven will return
to Sabbath mode and remain Sabbath compliant with the bake
elements off until the Cancel keypad is pressed.
Pressing the Cancel keypad at any time cancels the cooking
cycle and returns the oven to the normal cooking mode (not
Sabbath compliant).
Before entering the Sabbath mode, it must be decided if the
oven light is to be ON or OFF for the entire Sabbath mode
period. If the light is ON when entering Sabbath mode, it will
remain ON for the entire time Sabbath mode is in use. If the
light is OFF when entering Sabbath mode, it will remain OFF for
the entire time Sabbath mode is in use. Opening the oven door
or pressing the Light keypad will not affect the oven light once
Sabbath mode has been entered.
On the Holiday, the oven temperature can be changed once the
oven is in Sabbath mode by pressing the Temp/Time “up” or
“down” arrow keypad. The oven temperature will change 25°F
(14°C) each time the Temp/Time “up” and “down” arrow keypads
are pressed. Press START to activate the new temperature. The
display will not change and there will be no sounds during this
adjustment.
■■
To Bake Using Sabbath Mode:
1. Press BAKE.
2. To change the temperature, press the Temp/Time “up” or
“down” arrow keypad.
3. Press START.
4. Press and hold the Timer Set/Off keypad for 5 seconds.
“SAb” will flash in the display.
5. Press START while “SAb” is flashing to enter Sabbath mode;
otherwise, the entire cycle cancels out. “SAb” will stop
flashing and remain on in the display. The oven is now in
Sabbath mode and is Sabbath compliant.
Pressing the Cancel keypad at any time cancels the cooking
cycle and returns the oven to the normal cooking mode (not
Sabbath compliant).
To Set a Timed Bake Using Sabbath Mode
(on some models):
1. Press BAKE.
2. Press the Temp/Time “up” or “down” arrow keypad to enter
a temperature other than the one displayed.
3. Press COOK TIME. The Cook Time oven indicator light will
light up.
4. Press the Temp/Time “up” or “down” arrow keypad to enter
a cook time length.
5. Press START.
6. Press and hold the Timer Set/Off keypad for 5 seconds.
“SAb” will flash in the display.
7. Press START while “SAb” is flashing to enter Sabbath mode;
otherwise, the entire cycle cancels out. “SAb” will stop
flashing and remain on in the display. The oven is now in
Sabbath mode and is Sabbath compliant. The Bake, On, and
Cook Time indicator lights will be displayed.
When the set cook time ends, the oven will shut off automatically
and the indicator lights will turn off, indicating the end of the
cycle.
10
Pressing the Cancel keypad at any time cancels the cooking
cycle and returns the oven to the normal cooking mode (not
Sabbath mode compliant).
To Set a Delayed Timed Bake Using Sabbath Mode
(on some models):
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
1. Press BAKE.
2. Press the Temp/Time “up” or “down” arrow keypad to enter
a temperature other than the one displayed.
3. Press COOK TIME. The Cook Time oven indicator light will
light up.
4. Press the Temp/Time “up” or “down” arrow keypad to enter
a cook time length.
5. Press DELAY. The Delay indicator light will light up.
6. Press the Temp/Time “up” or “down” arrow keypad to enter
a start time.
7. Press START.
8. Press and hold the Timer Set/Off keypad for 5 seconds.
“SAb” will flash in the display.
9. Press START while “SAb” is flashing to enter Sabbath
mode; otherwise, the entire cycle cancels out. “SAb” will
stop flashing and remain on in the display. The oven is now
in Sabbath mode and is Sabbath compliant. The Delay
indicator light will be displayed.
When the start time is reached the Bake, On, and Cook Time
indicator lights will automatically turn on. When the set cook
time ends, the oven will shut off automatically and the indicator
lights will turn off, indicating the end of the cycle.
Pressing the Cancel keypad at any time returns the oven to the
normal cooking mode (not Sabbath mode compliant).
Keep Warm
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
NOTE: The convection fan will shut off when the oven door is
opened. If the oven door remains open for too long, the heating
elements will shut off until the oven door is closed. All timers,
including any active Cook Time or Timed Cook functions, will
continue to count down.
IMPORTANT: Food must be at serving temperature before
placing it in the warmed oven. Food may be held up to 1 hour;
however, breads and casseroles may become too dry if left
in the oven during the Keep Warm function. For best results,
cover food.
The Keep Warm feature allows hot cooked foods to stay at
serving temperature.
To Use:
1. Press WARM.
2. Press Temp/Time “up” or “down” arrow keypad until desired
temperature is reached. A tone will sound if the minimum or
maximum temperature is reached.
3. Press START.
4. Place food in the oven.
5. Press CANCEL when finished.
NOTE: The temperature may be changed at any time by
pressing the Temp/Time “up” or “down” arrow keypad to
the desired temperature and then START.
Aluminum Foil
Oven Vent
A
IMPORTANT: To avoid permanent damage to the oven bottom
finish, do not line the oven bottom with any type of foil or liner.
For best cooking results, do not cover entire oven rack with foil
because air must be able to move freely.
Positioning Racks and Bakeware
IMPORTANT: To avoid permanent damage to the porcelain
finish, do not place food or bakeware directly on the oven door
or bottom.
Bakeware
To cook food evenly, hot air must be able to circulate. Allow
2" (5 cm) of space around bakeware and oven walls. Make sure
that no bakeware piece is directly over another.
A. Oven vent
The oven vent releases hot air and moisture from the oven
and should not be blocked or covered. Blocking or covering the
oven vent will cause poor air circulation, affecting cooking and
cleaning results. Do not set plastics, paper, or other items that
could melt or burn near the oven vent.
On coil element models, the element can be used when the oven
is in use as long as the cookware does not extend more than
1
/2" (1.3 cm) over the element.
Racks
■■
Position racks before turning on the oven.
■■
Do not position racks with bakeware on them.
Make sure racks are level.
To move a rack, pull it out to the stop position, raise the front
edge, and then lift out. Use the following illustration as a guide.
■■
5
4
3
2
1
Rack Positions
Rack 5: Toasting bread or broiling thin, non-fatty foods
Rack 4: 2-rack baking and broiling
Rack 3: Most baked goods on a cookie sheet, muffin pan, or jelly
roll pan; layer cakes; broiling chicken pieces
Rack 2: Pies, casseroles, yeast bread, quick breads, frozen
convenience foods, 2-rack baking
Rack 1: Roasting large and small cuts of meat and poultry
Baking and Roasting
NOTE: The convection fan will shut off when the oven door is
opened. If the oven door remains open for too long, the heating
elements will shut off until the oven door is closed. All timers,
including any active Cook Time or Timed Cook functions, will
continue to count down.
ACCUBAKE® Temperature Management System
The ACCUBAKE® system electronically regulates the oven
heat levels during preheat and Bake to maintain a precise
temperature range for optimal cooking results. The bake and
broil elements or burners cycle on and off in intervals. On
convection range models, the fan will run while preheating and
may be cycled on and off for short intervals during Bake to
provide the best results. This feature is automatically activated
when the oven is in use.
Before baking and roasting, position racks according to
“Positioning Racks and Bakeware” section. When roasting, it is
not necessary to wait for the oven preheat cycle to end before
putting food in unless it is recommended in the recipe.
Preheating
When Start is pressed, the oven will begin preheating. Once
100ºF (38ºC) is reached, the display temperature will increase as
the actual temperature of the oven increases. When the preheat
temperature is reached, a tone will sound and the selected
temperature will appear on the display.
Multiple Rack Cooking
2-rack: Use rack positions 2 and 4.
Baking Layer Cakes on 2 Racks
For best results when baking cakes on 2 racks, use racks 2 and
4 for baking. Place the cakes on the racks as shown.
11
Broiling
NOTE: The convection fan will shut off when the oven door is
opened. If the oven door remains open for too long, the heating
elements will shut off until the oven door is closed. All timers,
including any active Cook Time or Timed Cook functions, will
continue to count down.
IMPORTANT: Close the door to ensure proper broiling
temperature.
Changing the temperature when Custom Broiling allows more
precise control when cooking. The lower the broil setting is, the
slower the cooking. Thicker cuts and unevenly shaped pieces of
meat, fish, and poultry may cook better at lower broil settings.
Use rack 4 or 5 for broiling. Refer to the “Positioning Racks and
Bakeware” section for more information.
On lower settings, the broil element will cycle on and off to
maintain the proper temperature.
■■ For best results, use a broiler pan and grid. It is designed to
drain juices and help avoid spatter and smoke.
If you would like to purchase a broiler pan, one may be
ordered. Please refer to the “Accessories” section for more
information.
NOTE: Odors and smoke are normal the first few times the oven
is used or if the oven is heavily soiled.
Cook Time
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
To Set a Timed Cook:
1. Press BAKE. The Bake indicator light will light up.
2. Press the Temp/Time “up” or “down” arrow keypad to enter
a temperature other than the one displayed.
3. Press COOK TIME. The cook time oven indicator light will
light up.
4. Press the Temp/Time “up” or “down” arrow keypad to enter
the length of time to cook.
5. Press START. The display will count down the time. When
the time ends, the oven will shut off automatically.
6. Press CANCEL to clear the display.
To Set a Delayed Timed Cook:
Before setting, make sure the clock is set to the correct time
of day. See the “Clock” keypad feature in the “Feature Guide”
section.
1. Press BAKE.
2. Press the Temp/Time “up” or “down” arrow keypad to enter
a temperature other than the one displayed.
3. Press COOK TIME. The cook time oven indicator light will
light up.
4. Press Temp/Time “up” or “down” arrow keypad to enter the
length of time to cook.
5. Press DELAY. The delay oven indicator light will light up.
6. Press Temp/Time “up” or “down” arrow keypad to enter the
time of day to start.
7. Press START.
When the start time is reached, the oven will automatically turn
on. The Temperature and/or Cook Time settings can be changed
anytime after the oven turns ON by repeating steps 2-4 and
pressing Start. To change to a different delay time, cancel the
feature and repeat steps 1-7. When the set cook time ends, the
oven will shut off automatically.
8. Press CANCEL to clear the display.
12
RANGE CARE
Self-Cleaning Cycle
(on some models)
WARNING
Burn Hazard
Do not touch the oven during the Self-Cleaning cycle.
Keep children away from oven during
Self-Cleaning cycle.
Failure to follow these instructions can result in burns.
IMPORTANT: The health of some birds is extremely sensitive
to the fumes given off during the Self-Cleaning cycle. Exposure
to the fumes may result in death to certain birds. Always move
birds to another closed and well-ventilated room.
Do not block the oven vent during the Self-Cleaning cycle. Air
must be able to move freely. Depending on your model, see
“Oven Vent” section.
Do not clean, rub, damage, or move the oven door gasket.
Prepare Range
■■
Remove the broiler pan, grid, cookware and bakeware, all
cooking utensils, oven racks and aluminum foil and, on some
models, the temperature probe from the oven.
■■
Use a damp cloth to clean inside door edge and the
11/2" (3.8 cm) area around the inside oven cavity frame,
being certain not to move or bend the gasket.
■■
Remove plastic items from the cooktop because they
may melt.
■■
Remove all items from the storage drawer.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in
the oven may result in discoloring, loss of gloss, hairline cracks,
and popping sounds.
Before Self-Cleaning, make sure the door is completely closed
or the door will not lock and the Self-Cleaning cycle will not
begin.
Once the oven has completely cooled, remove ash with a damp
cloth. To avoid breaking the glass, do not apply a cool damp
cloth to the inner door glass before it has completely cooled.
To stop the Self-Cleaning cycle at any time, press CANCEL.
If the temperature is too high, the oven door will remain locked
and “cool” and “locked” will be displayed. The cooling fan may
continue to run.
The oven light will not function during the Self-Cleaning cycle.
Electronic Oven Control with Adjustable Clean Time
(on some models)
The Self-Cleaning cycle is time adjustable between 2 hours
30 minutes and 4 hours 30 minutes in 30-minute increments.
Suggested clean times are 2 hours 30 minutes for light soil, and
4 hours 30 minutes for heavy soil.
IMPORTANT: When cooktop is in use, the Self-Cleaning cycle
will be disabled. When the Self-Cleaning cycle is in use, the
cooktop will be locked.
To Self-Clean:
1. Press CLEAN.
2. Press the Temp/Time “up” or “down” arrow keypad to enter
the desired Self-Cleaning cycle time.
3. Press START.
The oven door will automatically lock. The Door Locked and
Clean indicator lights will be displayed. The time remaining
will also be displayed.
4. When the Self-Cleaning cycle is complete and the oven
cools, the Door Locked and Clean indicator lights will
turn off.
5. When the oven is completely cooled, remove ash with a
damp cloth.
To exit the Self-Cleaning cycle before completed, press
CANCEL. The door will unlock once the oven cools.
13
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are
OFF and the oven and cooktop are cool. Always follow label
instructions on cleaning products. For additional information,
you can visit the Frequently Asked Questions (FAQs) section
of our website at www.whirlpool.com.
Soap, water, and a soft cloth or sponge are suggested first
unless otherwise noted.
2. Apply a few dime-sized drops of affresh® Cooktop Cleaner
to the affected areas.
EXTERIOR PORCELAIN ENAMEL SURFACES
(on some models)
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire range is cool. These spills may
affect the finish.
Cleaning Method:
■■
■■
Glass cleaner, mild liquid cleaner, or nonabrasive
scrubbing pad:
Gently clean around the model/serial/rating plate
because scrubbing may remove numbers.
affresh® Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See the “Accessories” section for more information.
■■
Rub affresh® Cooktop Cleaner onto the cooktop surface
with the blue Cooktop Cleaning Pad. Some pressure is
needed to remove stubborn stains.
Allow the cleaner to dry to a white haze before
proceeding to Step 3.
3. Polish with a clean, dry cloth or a clean, dry paper towel.
■■
STAINLESS STEEL (on some models)
NOTE: To avoid damage to stainless steel surfaces, do not use
soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner,
steel-wool pads, gritty washcloths, or abrasive paper towels.
Damage may occur to stainless steel surfaces, even with onetime or limited use.
Cleaning Method:
Rub in direction of grain to avoid damaging.
■■
affresh® Stainless Steel Cleaner Part Number W10355016
(not included):
See the “Accessories” section for more information.
METALLIC PAINT (on some models)
Do not use abrasive cleaners, cleaners with bleach, rust
removers, ammonia, or sodium hydroxide (lye) because
paint surface may stain.
CERAMIC GLASS (on some models)
Cleaning Method:
To avoid damaging the cooktop, do not use steel wool, abrasive
powder cleansers, chlorine bleach, rust remover, or ammonia.
1. Remove food/residue with the Cooktop Scraper.
Repeat steps 1 through 3 as necessary for stubborn
or burned-on stains.
The Complete Cooktop Cleaner Kit is available for order and
includes the following:
■■
■■
Cooktop Scraper
■■
affresh® Cooktop Cleaner
Blue Cooktop Cleaning Pads
See the “Accessories” section for part numbers and information
on ordering.
■■
COOKTOP CONTROLS
To avoid damage to the cooktop controls, do not use steel wool,
abrasive cleansers, or oven cleaner.
To avoid damage, do not soak knobs.
When replacing knobs, make sure knobs are in the OFF position.
On some models, do not remove seals under knobs.
Cleaning Method:
■■
Soap and water:
Pull knobs straight away from control panel to remove.
CONTROL PANEL AND OVEN DOOR EXTERIOR
■■
For best results, use the Cooktop Scraper while the
cooktop is still warm but not hot to the touch. It is
recommended to wear an oven mitt while scraping
the warm cooktop.
Hold the Cooktop Scraper at approximately a 45° angle
against the glass surface and scrape the residue. It will
be necessary to apply pressure in order to remove the
residue.
Allow the cooktop to cool down completely before
proceeding to Step 2.
To avoid damage to the control panel, do not use abrasive
cleaners, steel-wool pads, gritty washcloths, or abrasive
paper towels.
Cleaning Method:
■■
Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly
on panel.
■■
affresh® Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See the “Accessories” section for more information.
■■
14
COIL ELEMENTS (on some models)
Cleaning Method:
OVEN RACKS
Damp cloth:
Make sure control knobs are OFF and elements are cool.
Do not clean or immerse in water. Soil will burn off when hot.
■■
Steel-wool pad
■■
For racks that have discolored and are harder to slide,
a light coating of vegetable oil applied to the rack guides
will help them slide.
■■
BURNER BOWLS (on some models)
Cleaning Method:
Before removing or replacing coil elements and burner bowls,
make sure they are cool and the control knobs are in the Off
position.
Remove the coil element by pushing the edge of the coil element
toward the receptacle. Lift it enough to clear the burner bowl.
Pull the coil element straight away from the receptacle to
remove. Lift out the burner bowl.
STORAGE DRAWER (on some models)
Cleaning Method:
Chrome burner bowls
Do not use oven cleaners on models with Self-Cleaning.
Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain and staining,
etching, pitting, or faint white spots can result.
Cleaning Method:
Wash frequently in warm, soapy water. (It is not recommended
to wash chrome bowls in a dishwasher.) A mild abrasive cleaner
and a plastic scrubber can be used to remove stubborn stains.
For heavily soiled bowls, place an ammonia-soaked paper towel
on the stains and allow to soak for a short time, then gently
scrub with a plastic scrubber.
SURFACE UNDER COOKTOP (on some models)
The coil cooktop will lift up to provide easy access for cleaning
beneath. Lift the cooktop by both front corners until the support
locks into place.
Cleaning Method:
■■
Glass cleaner, mild liquid cleaner, or nonabrasive
scrubbing pad.
affresh® Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See the “Accessories” section for more information.
To avoid damage to the range, do not remove the cooktop.
■■
Check that storage drawer is cool and empty before cleaning.
Cleaning Method:
■■
Mild detergent
OVEN CAVITY
■■
See the “Self-Cleaning Cycle” section.
Oven Light
The oven light is a standard 40-watt appliance bulb. Before
replacing, make sure the oven and cooktop are cool and the
control knobs are in the Off position.
To Replace:
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, then bulb cover by turning clockwise.
5. Plug in range or reconnect power.
15
TROUBLESHOOTING
First try the solutions suggested here. If you need further assistance or more recommendations that may help you
avoid a service call, refer to the warranty page in this manual and scan the code there with your mobile device, or visit
http://www.whirlpool.com/product_help.
Contact us by mail with any questions or concerns at the address below:
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
Please include a daytime phone number in your correspondence.
Operation
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
Nothing will operate
Power supply cord is unplugged.
Plug into a grounded outlet.
Household fuse is blown or a
circuit breaker is tripped.
Replace the fuse or reset the circuit breaker. If the problem
continues, call an electrician.
The control displays an F9 or F9
E0 error code.
The electrical outlet in the home may be miswired. Contact a
qualified electrician to verify the electrical supply.
Cooktop will not operate
The control knob is set incorrectly. Push in knob before turning to a setting.
On ceramic glass models, the
oven Control Lockout is set.
See the “Control Lock” keypad feature in the “Feature Guide.”
Excessive heat around
cookware on cooktop
Cookware that is not the proper
size.
Use cookware about the same size as the surface cooking
area, element, or surface burner. Cookware should not extend
more than 1/2" (1.3 cm) outside the cooking area.
Cooktop cooking results not
what expected
Control knob set to incorrect
heat level.
See the “Cooktop Use” section.
Range is not level.
Level the range. See the Installation Instructions.
Cooktop element cycles on
and off on High setting
Element cycling due to a
temperature limiter.
This is normal operation. The element may cycle on and off to
keep the cooktop from overheating.
Oven will not operate
Delay Start is set.
See the “Electronic Oven Controls” section.
Control lock is ON.
Press and hold CONTROL LOCK for 3 seconds to unlock.
Control is in Demo mode.
Demo mode will deactivate all oven elements. See “Demo
Mode” in the Electronic Oven Controls” section.
Electronic oven control set
incorrectly.
See “Electronic Oven Controls” section.
Hot Surface indicator light is ON.
Wait for the cooktop surface to cool and try again when the
Hot Surface indicator light turns off.
Cannot turn control lock on/
off
Oven temperature too high or Oven temperature needs
too low
adjustment.
See the “Oven Temperature Control” in the “Electronic Oven
Controls” section.
Oven indicator lights flash
Power to range is turned on or
restored.
See “Control Display” in the “Electronic Oven Controls”
section. If the indicator light(s) keep flashing, call for service.
See the “Warranty” section for more information.
Display shows messages
Power failure. (Display shows
flashing time.)
Clear the display. On some models, reset the clock, if needed.
See “Clock” keypad feature in the “Feature Guide” section.
Error code. (Display shows letter
followed by number.)
Depending on your model, press CANCEL to clear the display.
See “Control Display” in the “Electronic Oven Controls”
section. If it reappears, call for service. See the “Warranty”
section for more information.
Start needs to be pressed so a
cycle can begin.
See the “Start” keypad feature in the “Feature Guide” section.
The oven door is not closed.
Make sure the oven door is fully closed.
The Self-Cleaning function has
not been entered correctly.
See the “Self-Cleaning Cycle” section.
A Timed Cooking function has
been entered.
See the “Cook Time” section.
The range is in Sabbath mode.
See the “Sabbath Mode” section.
Self-Cleaning cycle will not
operate
16
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
Oven cooking results not
what expected
Range is not level.
Level the range. See the Installation Instructions.
The temperature set was
incorrect.
Double-check the recipe in a reliable cookbook.
Oven temperature is calibrated
incorrectly.
See “Oven Temperature Control” in the “Electronic Oven
Controls” section.
Oven was not preheated.
See the “Baking and Roasting” section.
Racks were positioned improperly. See the “Positioning Racks and Bakeware” section.
Not enough air circulation around
bakeware.
See the “Positioning Racks and Bakeware” section.
Batter distributed unevenly in pan. Check that batter is level in the pan.
Darker browning of food caused
by dull or dark bakeware.
Lower oven temperature 25°F (15°C) or move rack to a higher
position in the oven.
Lighter browning of food
caused by shiny or light colored
bakeware.
Move rack to a lower position in the oven.
Incorrect length of cooking time
was used.
Adjust cooking time.
Oven door was not closed.
Be sure that the bakeware does not keep the door from closing.
Oven door was opened during
cooking.
Oven peeking releases oven heat and can result in longer
cooking times.
Oven door was open for too long.
If the oven door remains open for too long, the heating elements
will shut off until the oven door is closed.
Rack is too close to bake burner,
making baked items too brown on
bottom.
Move rack to higher position in the oven.
Pie crusts browning too quickly.
Use aluminum foil to cover the edge of the crust and/or reduce
baking temperature.
Temperature scale was changed
from Fahrenheit to Celsius.
Foods are overdone or burnt even at low temperatures. See
“Fahrenheit and Celsius” in the “Electronic Oven Controls”
section.
17
ACCESSORIES
For accessories, you can visit our website at www.whirlpool.com or call us at 1-800-253-1301.
Cooktop Care Kit
(ceramic glass models)
(includes cleaner, protectant, scraper,
and applicator pads)
Order Part Number 31605
Cooktop Protectant
(ceramic glass models)
Order Part Number 31463A
affresh® Stainless Steel Cleaning
Wipes
(stainless steel models)
Order Part Number W10355049
18
affresh® Cooktop Cleaner
(ceramic glass models)
Order Part Number W10355051
affresh® Stainless Steel Cleaner
(stainless steel models)
Order Part Number W10355016
affresh® Kitchen and Appliance
Cleaner
Order Part Number W10355010
Cooktop Scraper
(ceramic glass models)
Order Part Number WA906B
Granite Cleaner and Polish
Order Part Number W10275756
Standard Flat Oven Rack
Order Part Number W10268578
Porcelain Broiler Pan and Grid
Order Part Number 4396923
Premium Broil Pan and Roasting
Rack
Order Part Number W10123240
WHIRLPOOL®
MAJOR APPLIANCE
LIMITED WARRANTY
ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS
REQUIRED TO OBTAIN WARRANTY SERVICE.
Please have the following information available when you call the
Customer eXperience Center:
■■ Name, address and telephone number
■■ Model number and serial number
■■ A clear, detailed description of the problem
■■ Proof of purchase including dealer or retailer name and address
IF YOU NEED SERVICE:
1. Before contacting us to arrange service, please determine whether your product requires repair. Some
questions can be addressed without service. Please take a few minutes to review the Troubleshooting
or Problem Solver section of the Use and Care Guide, scan the QR code on the right to access
additional resources, or visit www.whirlpool.com/product_help.
2. All warranty service is provided exclusively by our authorized Whirlpool Service Providers.
In the U.S. and Canada, direct all requests for warranty service to:
www.whirlpool.com/product_help
Whirlpool Customer eXperience Center
In the U.S.A., call 1-800-253-1301. In Canada, call 1-800-807-6777.
If outside the 50 United States or Canada, contact your authorized Whirlpool dealer to determine whether another warranty applies.
WHAT IS COVERED
ONE YEAR LIMITED WARRANTY
WHAT IS NOT COVERED
1. Commercial, non-residential, multiple-family use, or use inconsistent with published user, operator
or installation instructions.
2. In-home instruction on how to use your product.
3. Service to correct improper product maintenance or installation, installation not in accordance with
electrical or plumbing codes or correction of household electrical or plumbing (i.e. house wiring,
fuses or water inlet hoses).
4. Consumable parts (i.e. light bulbs, batteries, air or water filters, preservation solutions, etc.).
5. Defects or damage caused by the use of non-genuine Whirlpool parts or accessories.
6. Conversion of products from natural gas or L.P. gas.
7. Damage from accident, misuse, abuse, fire, floods, acts of God or use with products not approved
by Whirlpool.
8. Repairs to parts or systems to correct product damage or defects caused by unauthorized service,
alteration or modification of the appliance.
9. Cosmetic damage including scratches, dents, chips, and other damage to the appliance finishes
unless such damage results from defects in materials and workmanship and is reported to
Whirlpool within 30 days.
YOUR SOLE AND EXCLUSIVE
REMEDY UNDER THIS LIMITED
10. Discoloration, rust or oxidation of surfaces resulting from caustic or corrosive environments
WARRANTY SHALL BE PRODUCT
including but not limited to high salt concentrations, high moisture or humidity or exposure to
REPAIR AS PROVIDED HEREIN.
chemicals.
Service must be provided by a
11. Food or medicine loss due to product failure.
Whirlpool designated service
12. Pick-up or delivery. This product is intended for in-home repair.
company. This limited warranty is
valid only in the United States or
13. Travel or transportation expenses for service in remote locations where an authorized Whirlpool
Canada and applies only when the
servicer is not available.
major appliance is used in the country 14. Removal or reinstallation of inaccessible appliances or built-in fixtures (i.e. trim, decorative panels,
in which it was purchased. This
flooring, cabinetry, islands, countertops, drywall, etc.) that interfere with servicing, removal or
limited warranty is effective from the
replacement of the product.
date of original consumer purchase.
15.
Service or parts for appliances with original model/serial numbers removed, altered or not easily
Proof of original purchase date is
determined.
required to obtain service under this
The cost of repair or replacement under these excluded circumstances shall be borne by
limited warranty.
the customer.
For one year from the date of
purchase, when this major appliance
is installed, operated and maintained
according to instructions attached
to or furnished with the product,
Whirlpool Corporation or Whirlpool
Canada LP (hereafter “Whirlpool”)
will pay for Factory Specified
Replacement Parts and repair labor
to correct defects in materials or
workmanship that existed when this
major appliance was purchased, or at
its sole discretion replace the product.
In the event of product replacement,
your appliance will be warranted for
the remaining term of the original
unit’s warranty period.
DISCLAIMER OF IMPLIED WARRANTIES
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not
allow limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives
you specific legal rights, and you also may have other rights that vary from state to state or province to province.
DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY
Whirlpool makes no representations about the quality, durability, or need for service or repair of this major appliance other than the
representations contained in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with this
major appliance, you should ask Whirlpool or your retailer about buying an extended warranty.
LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.
WHIRLPOOL SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the
exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives
you specific legal rights, and you also may have other rights that vary from state to state or province to province.
11/14
19
W10887091B
SP PN W10887132
/™ © 2016 Whirlpool. All rights reserved.
®
5/16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement