U-Line U2218RS00A Quick start guide

U-Line U2218RS00A Quick start guide
QUICK START GUIDE
2000 Series
•
115 V / 60 Hz
QUICK START GUIDE
u-line.com
WELCOME TO U-LINE
Congratulations on your U-Line purchase. Your product comes from a company with over five decades and three generations
of premium modular ice making, refrigeration, and wine preservation experience. U-Line continues to be the American
leader, delivering versatility and flexibility for multiple applications including residential, light commercial, outdoor and marine
use. U-Line’s complete product collection includes modular Wine Captain® Models, Beverage Centers, Clear Ice Machines,
Crescent Ice Makers, Glass & Solid Door Refrigerators, Drawer Models, Freezers, and Combo® Models.
U-Line has captivated those with an appreciation for the finer things with exceptional functionality, style, inspired innovations
and attention to even the smallest details. We are known and respected for our unwavering dedication to product design,
quality and selection. U-Line is headquartered in Milwaukee, Wisconsin with a west coast office located in Laguna Beach,
California and European support in Dublin, Ireland. U-Line has shipped product to five continents for over two decades and is
proud to have the opportunity to ship to you.
PRODUCT INFORMATION
Looking for additional information on your product? User Guides, Quick Reference Guides, CAD Drawings, Compliance
Documentation, and Product Warranty information are all available for reference and download at u-line.com under
Documentation.
PROPERTY DAMAGE / INJURY CONCERNS
In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following
steps:
1. U-Line Customer Care must be contacted immediately at +1.800.779.2547.
2. Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been
altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.
SERVICE INFORMATION
Answers to Customer Frequently Asked Questions are available at u-line.com under Customer Care or you may contact our
Customer Care group directly, contact information below.
GENERAL INQUIRIES
SERVICE & PARTS ASSISTANCE
U-Line Corporation
Monday - Friday 8:00 am to 5:30 pm CST
8900 N. 55th Street
T: +1.800.779.2547
Milwaukee, Wisconsin 53223 USA
F: +1.414.354.5696
Monday - Friday 8:00 am to 4:30 pm CST
Service Email: [email protected]
T: +1.414.354.0300
Parts Email: [email protected]
F: +1.414.354.7905
Email: [email protected]
u-line.com
CONNECT WITH US
Designed, engineered and assembled in WI, USA
QUICK START GUIDE
Contents
1
Model List
3
Safety and Warning
4
Environmental Requirements
4
Electrical
5
Door Swing
6
General Installation
6
Integrated Panel Installation
8
Control Operation
9
First Use
10
Sabbath Mode
10
Warranty
u-line.com
QUICK START GUIDE
u-line.com
Model List
This guide provides the basics to get you started. Looking for more information? Visit u-line.com to view detailed User Guides
for all U-Line products.
Wine Captain® Models
U-2218WCS-00A
U-2224ZWCS-00A
U-2218WCS-01A
U-2224ZWCS-01A
U-2218WCINT-00A
U-2224ZWCS-13A
U-2218WCINT-01A
U-2224ZWCS-15A
U-2224ZWCINT-00A
U-2224ZWCINT-01A
U-2224ZWCINT-60A
U-2224ZWCINT-61A
Beverage Centers
U-2224BEVS-00A
U-2224BEVS-01A
U-2224BEVS-13A
U-2224BEVS-15A
U-2224BEVINT-00A
U-2224BEVINT-01A
U-2224BEVINT-60A
U-2224BEVINT-61A
1
QUICK START GUIDE
u-line.com
Glass Door Refrigerators
U-2218RGLS-00A
U-2224RGLS-00A
U-2218RGLS-01A
U-2224RGLS-01A
U-2218RGLINT-00A
U-2224RGLS-13A
U-2218RGLINT-01A
U-2224RGLS-15A
U-2224RGLINT-00A
U-2224RGLINT-01A
Solid Door Refrigerators
U-2218RS-00A
U-2224RS-00A
U-2218RS-01A
U-2224RS-01A
U-2218RINT-00A
U-2224RINT-00A
U-2218RINT-01A
U-2224RINT-01A
Visit http://www.u-line.com/product-literature/userguides or
scan this QR code to view all user guides online.
2
QUICK START GUIDE
u-line.com
Safety and Warning
! DANGER
NOTICE
This unit contains R600a (Isobutane) which is a
Please read all instructions before installing,
flammable hydrocarbon. It is safe for regular
operating, or servicing the appliance.
use. Do not use sharp objects to expedite
defrosting. Do not service without consulting the
“R600a specifications” section included in the
Use this appliance for its intended purpose only and follow
User Guide. Do not damage the refrigerant
these general precautions with those listed throughout this
circuit.
guide:
SAFETY ALERT DEFINITIONS
! WARNING
Throughout this guide are safety items labeled with a
Danger, Warning or Caution based on the risk type:
Service must be done by factory authorized
service personnel. Any parts shall be replaced
with like components. Failure to comply could
! DANGER
increase the risk of possible ignition due to
incorrect parts or improper service.
Danger means that failure to follow this safety
statement will result in severe personal injury or
death.
! WARNING
Warning means that failure to follow this safety
statement could result in serious personal injury
or death.
! CAUTION
Caution means that failure to follow this safety
statement may result in minor or moderate
personal injury, property or equipment damage.
3
QUICK START GUIDE
u-line.com
Environmental Requirements
Electrical
This model is intended for indoor/interior applications only
! WARNING
and is not to be used in installations that are open/
exposed to natural elements.
SHOCK HAZARD — Electrical Grounding
Required. Never attempt to repair or perform
This unit is designed to operate between 50°F (10°C) and
maintenance on the unit until the electricity has
100°F (38°C). Higher ambient temperatures may reduce
been disconnected.
the unit’s ability to reach low temperatures and/or reduce
ice production on applicable models.
Never remove the round grounding prong from
the plug and never use a two-prong grounding
For best performance, keep the unit out of direct sunlight
adapter.
and away from heat generating equipment.
Altering, cutting or removing power cord,
In climates where high humidity and dew points are
removing power plug, or direct wiring can cause
present, condensation may appear on outside surfaces.
serious injury, fire, loss of property and/or life,
This is considered normal. The condensation will
and will void the warranty.
evaporate when the humidity drops.
Never use an extension cord to connect power to
the unit.
! CAUTION
Always keep your working area dry.
Damages caused by ambient temperatures of
40°F (4°C) or below are not covered by the
warranty.
NOTICE
Electrical installation must observe all state and
local codes. This unit requires connection to a
grounded (three-prong), polarized receptacle
that has been placed by a qualified electrician.
The unit requires a grounded and polarized 115 VAC,
60 Hz, 15A power supply (normal household current). An
individual, properly grounded branch circuit or circuit
breaker is recommended. A GFCI (ground fault circuit
interrupter) is usually not required for fixed location
appliances and is not recommended for your unit because
it could be prone to nuisance tripping. However, be sure
to consult your local codes.
4
QUICK START GUIDE
u-line.com
Door Swing
Wall
For Integrated models that are installed adjacent to a wall,
1/4" (6 mm)
1/4" (6 mm) clearance is recommended from wall on
hinge side to allow the door to open 90°. Allow for
additional space for any knobs or pulls installed on the
integrated panel/frame.
Stainless Steel models that are installed adjacent to a wall
require 2-1/4" (57 mm) door clearance on hinge side to
allow for door handle.
Units have a zero clearance when installed adjacent to
90°
Door Swing
cabinets.
Space Required
For any Knobs or Pulls
Integrated
2-1/4" MIN
(57 mm MIN)
Wall
90°
Door Swing
Stainless
5
QUICK START GUIDE
u-line.com
General Installation
INSTALLATION
1. Plug in the power/electrical cord.
LEVELING INFORMATION
1. Use a level to confirm
2. Gently push the unit into position. Be careful not to
the unit is level. Level
entangle the cord.
should be placed along
top edge and side
1
3. Re-check the leveling, from front to back and side to
edge as shown.
side. Make any necessary adjustments. The unit’s top
surface should be approximately 1/8" (3 mm) below
2. If the unit is not level,
the countertop.
remove grille and
adjust legs as
necessary.
4. Install the anti-tip bracket.
2
5. Remove the interior packing material and wipe out the
inside of the unit with a clean, water-dampened cloth.
Integrated Panel Installation
Rotate Front and Back Legs to Adjust
1. Fully open door.
3. Confirm the unit is level after each adjustment and
repeat the previous steps until the unit is level.
2. Starting at corner, pull
gasket away from door.
INSTALLATION TIP
If the room floor is higher than the floor in the cutout
3. Continue to pull gasket
opening, adjust the rear legs to achieve a total unit rear
free from gasket channel.
height of 1/8" (3 mm) less than the opening’s rear height.
Shorten the unit height in the front by adjusting the front
legs. This allows the unit to be gently tipped into the
4. Upon removal, lay gasket down on a flat surface.
opening. Adjust the front legs to level the unit after it is
correctly positioned in the opening.
5. The panel should be aligned with the outside edge
(opposite the hinge) and high enough to align with the
highest point in the door.
Align Top Of Panel With Highest Point Of Door
Align Panel
Against
Door Edge
First
6
QUICK START GUIDE
u-line.com
9. Using a Phillips screwdriver, place one screw into each
NOTICE
of the 6 pilot holes and screw down. Do not overtighten
Due to differences in floor construction or
screws.
surrounding cabinetry, the panel may not sit
flush with the top of the door.
Panel
6. Secure integrated
panel to door using
10.Be sure the screws force their way past the opening on
the gasket channel and sit flush against the bottom of
Door
the channel.
Integrated Panel
Integrated Panel
Bar
Clamp
clamps. A robust
11.Remove clamps from door.
tape may also be
used. U-Line
recommends the
use of bar clamps
to secure the panel
to the door. If using
tape, be certain the
NOTICE
If panel requires additional adjustment after
Door/Drawer
removing clamps, slightly loosen each screw and
adjust panel as necessary. Tighten screws upon
Wood
Panel
completion.
tape will not
damage panel finish
12.Starting at the corners, re-install the gasket into the
upon removal.
gasket channel in the frame. Make sure the gasket is
7. Using a 7/64"
(3 mm) drill bit, drill
fully seated. This may take some force.
Bar
Clamp
6 pilot holes into
the wood panel 1/2"
(12 mm) deep using
the holes in the
door frame as a
guide.
NOTICE
It is important to ensure that all drilled holes are
drilled to the correct depth in order to avoid
splits in the wood when hardwood is installed.
8. Locate 6 of the #6x 1-1/2" (38 mm) screws provided
with your unit.
7
QUICK START GUIDE
u-line.com
Control Operation
ALL 2200 SERIES EXCEPT ZWC
Not Alert
Light Power Used LED
Up Down
CONTROL FUNCTION GUIDE
FUNCTION
COMMAND
DISPLAY/OPTIONS
ON/OFF
Press
and release
Unit will immediately turn ON or OFF.
Press
and release to leave interior
Toggle lights
Adjust refrigerator set
light on for 3 hours
When the “F” or “C” in the display is flashing, press
Press
or
and release
View temperature in unit
Press
and
together and release
Toggle between F/C
Hold
point
and
Glass door wine and beverage centers only.
or
for five seconds
to adjust the set point temperature.
The display will flash and then toggle from set point
to temperature in unit.
The display will change units.
DOOR ALERT NOTIFICATION
When the door is left open for more than 5 minutes:
• An audible tone will sound for several seconds every
minute.
• The Alert LED will blink.
Close door to silence alert and reset.
NOTE: Door alert notification applies to all 2200 series.
8
QUICK START GUIDE
u-line.com
2200 SERIES ZWC
Alert
Light Power Auxiliary LED
Up Down
CONTROL FUNCTION GUIDE
FUNCTION
COMMAND
DISPLAY/OPTIONS
ON/OFF
Press
and release
Unit will immediately turn ON or OFF.
Toggle lights
Press
and release
Leave interior light on for 3 hours.
Press
or
and release
Press
or
to adjust set point
The zone you are setting will have its light turned on
(top zone first).
temperature
Adjust temperature
Press
Press
to change zones
or
Light will switch from top zone to the bottom zone.
to adjust set point
temperature
Press
Display will show the set temperature.
Display will show the set temperature.
to confirm and exit
The display will flash and then toggle from set point
View temperature in unit
Press
and
together and release
to temperature in unit. The temperature shown will
correspond to the illuminated zone.
Toggle between F/C
Hold
and
for five seconds
The display will change units.
First Use
All U-Line controls are preset at the factory. Initial startup
When plugged in, the unit will begin operating under the
requires no adjustments.
factory default settings. If the unit was turned off during
installation, simply press
and the unit will immediately
switch on. To turn the unit off, press
NOTICE
U-Line recommends allowing the unit to run
overnight before loading with product.
9
.
QUICK START GUIDE
u-line.com
Warranty
L
U-LINE CORPORATION LIMITED WARRANTY
Sabbath Mode
1
2
1. U-Line Corporation (“U-Line”) warrants each U-Line
3
4
5
product to be free from defects in materials and
6
workmanship for a period of one year (two years on
Modular 3000 Series) from the date of purchase.
U-Line further warrants the sealed system (consisting
of the compressor, condenser, evaporator, hot gas
This unit is Star-K certified and offers a Sabbath mode.
bypass valve, dryer, and connecting tube) in each
Sabbath mode disables system responses to user initiated
U-Line product to be free from defects in materials and
activities and all external functions, including lighting,
workmanship for a period of five years from the date of
display and audible alarms. The unit will still maintain
purchase.
internal temperatures and set points. View a full list of
Star-K certified U-Line units at www.star-k.org.
2. During the initial one year warranty period (two years
on Modular 3000 Series) for all U-Line products U-Line
shall: (1) repair any product or replace any part of a
To enable Sabbath Mode:
product; and (2) for all Marine, RV, and Domestic
1. Press
U-Line products sold and serviced in the United States
(4) and hold for ten seconds and release (the
(including Alaska and Hawaii) and Canada, U-Line
°F/°C symbol will flash briefly at the end of the ten
shall be responsible for the labor costs performed by a
second period).
U-Line authorized service company, incurred in
connection with the replacement of any defective part.
During years two through five of the warranty period
2. The interior light and control display (3) will go dark
for the sealed system, U-Line shall: (1) at U-Line’s
until user resets mode.
option repair or replace any part of the sealed system;
and (2) for all Marine, RV, and Domestic U-Line
3. NOTE: Although the display will not be visible, the
products sold and serviced in the United States
temperature controls in the unit remain active and
(including Alaska and Hawaii) and Canada, U-Line shall
preserve the interior temperature.
be responsible for the labor costs incurred in
connection with the replacement of any defective part
Sabbath Mode remains active until
of the sealed system. All other charges, including
(4) is quickly
transportation charges for replacements under this
pressed and released.
warranty and labor costs not specifically covered by
this warranty, shall be the responsibility of the
purchaser. This warranty extends only to the original
purchaser of the U-Line product. The Product
Registration Card included with the product should be
promptly completed by you and mailed back to U-Line,
or you can register on-line at www.u-lineservice.com.
3. The warranty listed above does not apply to floor
display models. The warranty for these models shall
be 30 days from the date of retail purchase and only if
U-Line’s Product Registration Card included with the
10
QUICK START GUIDE
u-line.com
unit is completed and mailed back or electronically
of pool water, or directing a spray from a hose or
submitted to U-Line. This 30 day warranty does not
similar device into and around the unit.
apply to cosmetic damages. A proof of purchase may
be required.
7. If a product defect is discovered during the applicable
warranty period, you must promptly notify either
4. The following conditions are excluded from this limited
U-Line at 8900 N. 55th Street, Milwaukee, Wisconsin
warranty: use of cleaners other than the recommended
53223 USA or at +1.800.779.2547 or the dealer from
stainless steel cleaners and U-Line Clear Ice Maker
whom you purchased the product. In no event shall
cleaner; installation charges; damages caused by
such notification be received later than 30 days after
disasters or acts of God, such as fire, floods, wind, and
the expiration of the applicable warranty period. U-Line
lightning; damages incurred or resulting from shipping,
may require that defective parts be returned, at your
improper installation, unauthorized modification, or
expense, to U-Line’s factory in Milwaukee, Wisconsin,
misuse/abuse of the product; customer education
for inspection. Any action by you for breach of
calls; food loss and spoilage; door and water level
warranty must be commenced within one year after
adjustments (except during the first 30 days from the
the applicable warranty period.
date of installation); defrosting the product; adjusting
the controls; door reversal; and cleaning the
8. THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL
condenser.
OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR IMPLIED WARRANTY OF
5. U-Line products are designed to operate in ambient
temperatures between 50°F and 100°F unless
FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH
otherwise noted in the product manual. Exposure to
ARE DISCLAIMED. U-Line’s sole liability, and your
temperatures outside this range may cause
exclusive remedy, under this warranty is set forth in
degradation of performance and issues, such as lower
the paragraphs above. U-Line shall have no liability
ice production or spoiled contents, that are not
whatsoever for any incidental, consequential, or
covered under the terms of this warranty as a result of
special damages arising from the sale, use, or
that exposure. U-Line product may not be subjected to
installation of the product or from any other cause
temperatures below 40°F without following the
whatsoever, whether based on warranty (express or
winterization and vacation shutdown procedures in the
implied) or otherwise based on contract, tort, or any
user guide.
other theory of liability.
Some states do not allow limitations on how long an
6. U-Line’s Outdoor Limited Warranty, set forth in this
Paragraph 6 shall apply to U-Line models deemed
implied warranty lasts or the exclusion or limitation of
suitable for outdoor use by Underwriters Laboratory
incidental or consequential damages, so the above
(“UL”) as noted in the U-Line Product Catalog, U-Line’s
limitations may not apply to you. This warranty gives you
website, and/or on the serial tag located inside the
specific legal rights, and you may also have other rights
product.
which vary from state to state.
A. Outdoor product may come into contact with rain by
Warranty 6/2014 Rev.G
virtue of outdoor use. Exposure to other sources of
water shall also cause this warranty to be void,
including flooding of the area in proximity of the unit
greater than 1/8" deep in water, hurricanes, splashing
Copyright © 2014 U-Line Corporation. All Rights Reserved.
Publication Number 30424 7/2015 Rev.B
11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement