EMERSON
QUIET KOO L®
Smart Air Conditioner
WIFI Use Manual
This description is applied to Air Conditioners with WIFI function. Please
read the manual carefully before using the product and keep it for future
reference.
Please scan the QR code to download the latest App software,
or download Smart Life-smart homefrom APP Store or Goo-
gle Play. The latest App software includes air conditioner, deh-
umidifier and Portable air conditioner.
53:5]
a
L
For Android For IOS
Service condition
Thank you for choosing our air conditioner.
This manual applies to air conditioners featuring the WiFi function.
Please read the manual carefully before using the product and keep it
for future reference.
Please do not unplug the WIFI module by yourself.
For technical update, there may be deviation ofthe actual items from
the manual. We express our apologies. Please referto the actual product.
Mention
FCC ID: 2AJCLTWAC-TUWF
This device complies with Part 15of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device mustaccept any interference received, including inter-
ference that may cause undesired operation.
1
Installing the APP
Download the APP software, and install it on your smart phone or tablet.
After installation, locate the “Smart Life” icon.
Smart Life
Installation source: Browser
Smart Life
© | understand the risk, install anyway
[ Cancel )| Official version )
Activate QR code
1. When you open the App for the first time, it will display the activation interface.
You can select scan activation QR code (click “Scan” button and scan the
activation QR code in below page) or input “Activation Code” words (see below),
click “activate” button to active it.
Scan the activation QR code
from instructions or device
Scan
Enter Activation Code
Air conditioner activation QR code
3. Air conditioner activation code: EQK
Register useraccount
When using the App for the first time, you need to register an account.
Click “Register” button to continue. You can register with your email or
Mobile number.
{Back Register {Back Register
| Е-тай | | USA +01> |
Smart Life
| Register |
or Register with Mobie number>
Login to your user account
1. Enter the registered email or phone number account and password, press “Login” button.
2. Using your phone number to login, press “Sign in with SMS” button to enter the next page,
enter the phone number and press “get” button to receive the confirm code, via test enter
code, then press “Login” button.
3. You also can use the Facebook or Twitter account to login by selecting the appropriate icon.
« Back Login Cancel SMS verify and sign in
USA +01 > USA +01)
Mobile number/E-mail Phone Number
Password © Verification Code Get
Sign in with SMS Forgot password
Sign in with social media account
f У
Facebook Twitter
Forgot password
If you forget your password, follow the steps below.
1. Press the “Forgot password” button to enter the next page.
2. Enter the phone number or email account user to register, press Next” button to enter the
next page.
3. You will receive a verification code, enter the code it, and set the new password, press
“confirm” button to finish.
< Back Login <Back Request password < Back Request password
Verification code is sent to your phone:
+01> +01 XXXXXXXXXX
Mobile number/E-mail Verification Code resend(58)
ani
Sign in with SMS Forgot password
Region United States +1 > USA
Mobile number/E-mail
Sign in with social media account
f »
Facebook Twitter
Adding your device
1. Press “Add Device” button to next page, select the product type.
2. There are two methods to add the device match, “CF” or “AP mode”.
You can choose by the different button..
Add Device AP Mode
Window Type Air Conditioner
E- Split Air Conditioner >
Dehumifier >
= a Portable Air Conditioner >
Empty device list
Press the "DISPLAY" key on the remoter
6 timers within 6 seconds
until the LCD screen show "CF"
Instructor light is in other status
am ® am
Device Add Device Profile Devices Add Device Profile
4
Add the device (CF mode)
For CF Mode
1. The system defaults to CF mode at first, Press “Next Step” to continue.
2. Select the home router, and enter the password of router, press “Next” to continue.
Cancel Add Device AP Mode {Back Enter Wi-Fi password
This app is supported only 2.5GHz Wi-Fi channels
E
= Wi-Fi : >
a I o
Press the "DISPLAY" key on the remoter
6 timers within 6 seconds
until the LCD screen show "CF"
Instructor light is in other status
3. The APP software will automatically begin searching for your device.
4. After successfully connected, the page will display the prompt as below.
5. You can “Rename” the device, or share with family, press “Done” tocontrol the device.
{Back Trying to Connect Device
< Back Trying to Connect Device
Successfully add 1 devices >
Smart device name Rename
Device is connecting
Make sure your phone and device
are as close to your router as possible.
O Searching for device |
O Registering device to the cloud
© Initializing your device
Share with family
—
Add the device (AP mode)
For AP mode
1. Click the “AP Mode” to get to the “AP” screen. Press “Next Step” to continue.
2. Select the home router, enter the password, press “Next” to continue.
Cancel Add Device
AP Mode NM < Add Device <Back Enter Wi-Fi password
This app is supported only 2.5GHz Wi-Fi channels
=
т \\/-Р!: >
Press the DISPLAY on the remote control & PL | o
key 6 times in the time of 6 seconds until
the LCD screen show "AP"
LCD in other stat
Instructor light is in other status screen In other status
Press the "DISPLAY" key on the remoter
6 timers within 6 seconds
until the LCD screen show "CF
3. Select the AC Device named “SmartLife-XXX" at the WLAN setting, then back to
the App interface. The App will automatically match your device.
< Back Trying to Connect Device
WLAN {Back Trying to Connect Device
Tum on or turn off
WLAN e
Available networks
Open phone "setting-WLAN" and
connect to the Wi-Fi network
Not connecting? Refer to help SmartLife-xxx Device is connecting
Make sure your phone and device
are as close to your router as possible.
2)
2
»s
||
= O Searching for device
GEI | rm > ilazng Your vo *
O Initializing your device
Add the device (AP mode continued
4. After successfully matched, the page will display the prompt as below.
5. If the match failed, the App will display an error message. Press “Retry” to try again.
{Back Trying to Connect Device < Back Connection error
©
Successfully add 1 devices À
Smart device name Rename
70
Connection error, refer to help and retry
— e. — eo
Go back to “Device list” page.
Slide the device name toward the left side, you can choose to delete it,
or modify the device name.
Devices Devices Devices
Delete
Delete
Delete
1
1 1
ı 2) Air Conditioning > | CJ Air Conditioning > [1 Air Conditioning >
I Indoor sensor malfunction !
Indoor sensor malfunction
Modify Device Name
Indoor sensor malfunction
1
1
Are you sure you want to PULL Len | meme m= =
remove this device?
| Cancel Confirm | Cancel | Confirm
= D. Q в a © ® N : © ®
Device Add Device Profile Device Add Device Profile
Air conditioner control
1. Click the air conditioner name to enter the control interface. Turn ON/OFF.
Air Conditioner
Turn ON/OFF.
Adjust the temperature.
«Back
Mi
I
S >
= 23 |__ Display the setting
= Set Temperature temperature.
7 La 7
Increase setting
— — | + ® temperature.
Decrease setting
temperature.
= ©
a Je
Mode Fan Function Timer
* For App update, the App interface may differ from screenshots in this manual without
prior notice.
2. Operating modes: Cool, Heat, Dry, Fan, Auto mode. Click the “Mode” button, and choose
In Dry mode, the App temperature display may be little different from the unit display for
desired mode.
the first 3 minutes, caused by the unit temperature quickly changing.
< Back Air Conditioner
©
WII
S
N
>
= 23
= Set Temperature
7,
7
A
HA X
( Mode )
Auto Cool Heat
Dry Fan
Mode Fan Function Timer
Air conditioner control continued
3. Click the “Fan” button, to set the fan speed, Low, Med, High, Auto.
<Back
© © © ©
Mode Fan
Air Conditioner
QU
3
Set Temperature
HI
EN AR
Fan
Auto
Med Low
+ BEE
High
qe
Function Timer
4. Select the "function" button for sleep and Eco modes.
When in Sleep mode, the fan speed will be set to low speed.
<Back
Air Conditioner
O
NN |
3;
Set Temperature
”
wg,
EX AR
( Function )
о ©
Sleep ECO
+ MEN ©
Function Timer
qe
Mode Fan
Air conditioner control
5. Setting Timer function. Click the “Timer” button, to enter the timer interface.
Press "Add Timer" to set a new timer.
Previous timers will be displayed on timer main screen.
You can edit an existing timer by selecting it from the list.
< Back Air Conditioner ... <Back Add Timer
() Timer accuracy is -/+30 seconds
14:28
Sun, Mon, Tues, Wed, Thur UU
| | Timer: ON Auto Auto
\\
SN 14:28
SN Wed
RS 3 Timer OFF
= Set Temperature
7
AA
LÀ
[= |
a + = O ( Add Timer )
Mode Fan Function Timer
Air conditioner control
7. More settings. From the 3 dots in the upper right hand corner, there are
additional settings, such as Modify Device Name, Device Sharing, Device
information, Feedback, Check for firmware update, and Remove Device,
Restore Manufacture setting.
AM
N
23
Set Temperature
WH
N y
IN R%
Йон
Timer
Function
Modify Device Name window type air condi >
Device Sharing >
Device info >
Feedback
Check for Firmware Update >
Remove Device
Restore Manufacture Defaults
6. Click “ON” or “OFF” button to set Timer ON or Timer OFF.
You can set Hour, Minute, operate Mode, Fan Speed, Temperature, and days of the week.
After you have entered the info, click "Save" to save your timer, or cancel to exit.
Timer cance Cancel Add Timer Save
Hour setting— 15 10
Timer Off
Timer On O
Mode setting— Mode Cool >
Fan Speed + Fan Auto >
setting
Temperature —- Set Temperature 23°C >
setting
Function >
Cancel
Add Timer Save
Select days to use Smart Mode
9 E E E EE ©
©-
Timer Off
Timer On
Timer submit
—Minute setting
— Weekly setting
— Timer ON/OFF
setting
11
Air conditioner control
8. You can manage your personal information. Under profile including:
a, Account information.
b, Scan QR code: Developers could preview the control interface.
C, Share Device: Display user's device sharing information.
d, Message Center: Displays all messages that system sent to users.
e, Feedback: Where users could submit feedback online.
F, About: Displays the current App version.
Profile Settings
Tapto set your name ;
+о1-хх НИИ
= Scan QR Code >
< Device Sharing >
"© Message Center | >
ЕН Feedback >
© Abst >
Devices Add Devices Profile
9. Pattern unlock. Tap “Pattern unlock” to set up your App unlock pattern.
After it is enabled, you need to draw the pattern to unlock the App.
< Back Create pattern password < Back Create pattern password
O O Enter pattern password again
“< ® — е _ @
Create a pattern password. Other persons can't control
your devices even with your smartphone ©
Create pattern password
Trouble shooting
Description Analysis of cause
1. Check the WIFI address and password is
correct;
2. Check the air conditioner under configuration
status;
3. There are any firewall or other restrictions have
been set or not;
4. check the router;
5. Make sure air conditioner, router and mobile
device are with in WIFI range.
6. Check router shielding App or not
Air conditioner
can't be configured
successfully
Error displayed:Identification failed, This means
the air conditioner has been reset, andthe mobile
Phone will lost control permission. You need to
connect WIFI to get permission again.
Please connect the local network and refresh it.
After all still can't work, please delete air
conditioner and wait its refresh.
Mobile can’t control
air conditioner
Software display: Air conditioner out of line.
Please check network working
. The air conditioner has been reconfiguration
. Air conditioner out of power
. Router out of power
. Air conditioner can’t connect to router
. Air conditioner can’t connect to network through
the router(under remote control mode)
6. Mobile can't connect to router(Under local
control mode);
7. The mobile phone can’t connect to network
(under remote control mode).
Mobile can't find air
conditioner
aa RN -
12
">
