Friedrich | SH20N50A | Hazardgard Brochure | Friedrich SH20N50A Hazardgard Brochure

Friedrich SH20N50A Hazardgard Brochure
Hazardous Location Room Air Conditioners
UL LISTED for CLASS 1, DIV 2, GROUPS A, B, C and D.
CERTIFIED in accordance with ISA 12.12.01 and NFPA 70
(NATIONAL ELECTRIC CODE), ANSI/UL 484 Room Air Conditioners
KSA registered model tested in accordance with SASO 2681
Models available from 15,000 Btu to 24,000 Btu
Hazardgard
®
Engineered to perform in the harshest conditions.
50 | 60
HERTZ
FRI E D R I CH . C O M
THE EXPERTS IN ROOM AIR CONDITIONING
Hazardgard®
Engineered to perform in the harshest conditions.
Hazardgard meets
T4 temperature
classification
• Unit surface temperatures will
not rise above 135° C/275° F.
• Operates at low ambient
conditions without freezing at
outdoor ambient temperatures as
low as 7° C/45° F.
• Tolerates higher outdoor
temperatures up to 55° C /130° F.
For more than 30 years, industrial professionals have trusted Hazardgard® to deliver safe and reliable
cooling in the most extreme conditions. Hazardgard is specifically designed to cool laboratories, control
rooms, living quarters, storage areas and other enclosures situated in hazardous locations where
specific volatile flammable liquids or gases are handled or used within enclosed containers or systems.
Hazardgard® is rated for these conditions:
Model
Hazardous Location Classification: Gases
SH15M30A
SH20M30B
SH20M50A
SH24N20
National Electrical Code, NFPA 70
ARTICLE 501: Class 1, Division 2, Group A / B / C / D , Temperature Class T4 / T4A*
ARTICLE 505: Class 1, Zone 2, Group II C / IIB / II A , Temperature Class T4 / T4A*
LISTED
PORTABLE AIR CONDITIONERS
183H
* T4A Temperature classification for dual frequency (50 / 60 Hz) models - SH24N20
For global applications, Hazardgard cooling capacities are tested in a certified laboratory at moderate (T1*) and hot (T3*) climate conditions
in accordance with SASO (Saudi Arabian Standards Organization) Standard 2681. SASO Standard 2681 is adopted from ISO Standard 5151
for testing and rating for performance of non-ducted air conditioners and heat pumps. Model SH20M30B is KSA Registered in accordance
with SASO2681 and meets SASO 2663 Energy Efficiency standard.
The Friedrich Advantage
Reliable Design Backed by Robust Engineering
Quality
Product Reliability
Durability
Friedrich is an established player
in the air conditioning industry
and is known for manufacturing
quality products.
Used across the globe, Hazardgard
is a tested and reliable product and
not a quick-fix, job shop alteration.
Robust engineering, commercialgrade components and extensive
field testing provide the durability
and safety required in hazardous
locations.
Availability
Off the shelf models allow for efficient manufacturing,
shorter lead times and standardized component parts.
FEATURES
Durability & Reliability
• Permanent split capacitor motor
• Hermetically sealed refrigeration system
• Environmentally sealed on/off switch and gold
plated contacts in thermostat for corrosion resistance
• Solid-state control relays for compressor and fan operation
• Commercial grade, enclosed fan motor with hermetically
sealed overload for arc-free operation
• Direct-wired (field supplied), 15-amp circuit
with time delay fuse that will tolerate current
surge without tripping the breaker
• Powder Coated 22-gauge, G60 steel air
conditioner cabinet for corrosion protection
and to withstand years of hard use
• Stainless Steel Fan Shaft
• Coated Coils for Corrosion Protection
Performance in Extreme Conditions
• Hot gas bypass for cooling operation at low ambient
temperatures, down to 45ºF / 7ºC without freezing
• Hermetically sealed reciprocating compresssor is cooled
during the refrigeration cycle, which allows the unit to tolerate
higher outdoor temperatures up to 130ºF (55ºC)
Coated Coils for Corrosion Resistance
ElectroFin® 5-stage, immersion ecoat process, or Diamonblue
Advanced Corrosion Protection® on 100% of metallic surfaces on the
outdoor coil provides outstanding corrosion resistance protection
and extends the life of the unit, especially in coastal or corrosive
environments.
Diamonblue Advanced Corrosion Protection®
Engineered to perform
in the harshest
environments
• Offshore oil rigs, on-shore oil
company offices and refineries
• Petrochemical sites and
Propane fill-up stations
• Paint and varnish storage or
processing plants
• Grain alcohol processors or
storage sites
STANDARD ON ALL MODELS (except SH24N20, see below)
• Anti-corrosive, hydrophilic coating
• Plant areas using strong
solvents or chemicals
ElectroFin® 5-stage, Immersion Ecoat Benefits:
MODEL SH24N20 ONLY
• Munitions plants or armories
• Excellent adhesion characteristics
• Outstanding chemical resistance
• PVC or plastics plants and
processing points
• Passed 6048 hrs.ASTM B-117 Salt Spray
• Recycling plants
• Less than 1% thermal degradation
MEETS THE FOLLOWING:
• MIL-C-46168 Chemical Agent Resistance
-DS2, HCI Gas
5-STAGE ecoat
Corrosion Protection
• Furniture refinishing/stripping
workshops
• CID A-A-52474A (GSA)
• Office complexes where
methane is a by-product
• MIL-STD 810F, Method 509.4 (Sand and Dust)
• Hazardous materials storage
• MIL-P-53084 (ME)-TACOM Approval
• MIL-DTL-12468 Decontamination Agent (STB)
• DPG (Douglas Proving Grounds) Soil & Water
Exposure Tests
• GM9540P-97 Accelerated Corrosion Test (120 cycles)
• ASTM B117-G85 Modified Salt Spray (Fog) Testing-2,000 hours
• ASTM B117 Salt Spray (tested by ARL for Lockheed Martin)
SPECIFICATIONS
Electrical Characteristics
Cooling Capacity
Model
Btu/Hr.
Energy
Efficiency
Ratio
Moisture
Removal
Air
Circulation
Volts
Rated
Cooling
Cooling
Circuit Rating Breaker or
T - D Fuse
Amps
Watts
Volts - Amps
EER
Pints/ Hr
CFM
Refrigerant
60 HERTZ
SH15M30A
14500/14000
230/208
6.9/7.5
1495/1443
250V-15
9.7/9.7
4.0
375
R-410A
SH20M30B
19000/19000
230/208
8.5/9.4
1965/1970
250V-15 (230V) / 250V-20 (208V)
9.7/9.6
5.5
375
R-410A
SH24N20
24000/23700
230/208
12.6/13.5
2727/2788
250V-20
8.8/8.5
8.0/7.5
385
R-410A
50 HERTZ
SH20M50A
19500/19100
240/220
9.8/10.3
2167/2156
250V-20
9.0/9.0
5.6/5.5
425
R-410A
SH24N20
21000/20500
240/220
15.0/13.2
2600/2412
250V-20
8.1/8.5
7.0/7.0
360
R-410A
INSTALLATION INFORMATION
Window Width
Inches
Dimensions
Inches
Depth with Depth J Box
Front
to Louvers
Weight
Lbs.
Minimum
Extension
Into Room
Minimum
Extension
Outside
Min.
Max.
Height
Width
Max. Depth
6”
3 1/16”
16 15/16”
27 7/8”
42”
16 3/16”
26 3/16”
6”
140
167
16 15/16”
27 7/8”
42”
18 3/16”
26 3/16”
6”
166
170
42”
18 3/16”
26 3/16”
6”
171
175
42”
18 3/16”
26 3/16”
6”
180
185
Height
Width
)A(
SH15M30A
15 15/16”
25 15/16”
27 3/8”
SH20M30B
17 15/16”
25 15/16”
27 3/8”
6”
3 1/16”
SH20M50A
17 15/16”
25 15/16”
27 3/8”
6”
3 1/16”
16 15/16”
27 7/8”
SH24N20
17 15/16”
25 15/16”
27 3/8”
6”
3 1/16”
16 15/16”
27 7/8”
Model
In-Wall Installation
Finished Hole Inches
Net Shipping
Due to continuing engineering research and technology, specifications are supbject to change wihtout notice.
U.S. MAXIMUM outdoor ambient operating temperature is 130ºF. (55ºC) MAXIMUM TEMPERATURE RATING FOR CLASS 1, DIVISION 2,
GROUPS A, B, C, D.
Capacity and efficiency values at each climate conditions are available upon request.
NOTE: Hazardgard unit must be hard-wired.
Manufactured under Design Patent DES 368, 306 decorative front; Utility Patent 5, 662, 058.
Sleeve Dimensions Drawing
)A(
Max.
Wall
Depth
Junction
Box
Front
SIDE VIEW
LISTED
PORTABLE AIR CONDITIONERS
183H
Friedrich Air Conditioning Co. l 10001 Reunion Place, Suite 500 l San Antonio, TX 78216 l 877.599.5665 l www.friedrich.com
BRO_HAZ_COMM_2016
Printed in USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising