Friedrich | SH20M30B | Brochure | Friedrich SH20M30B Brochure

Friedrich SH20M30B Brochure
HAZARDOUS LOCATION
ROOM AIR CONDITIONERS
UL LISTED
KSA REGISTERED
and TESTED in
accordance with
SASO 2681
for CLASS 1, DIV 2,
GROUPS A, B, C and D.
CERTIFIED
in accordance with
ISA 12.12.01 and NFPA 70
(NATIONAL ELECTRIC CODE),
ANSI/UL 484
Room Air Conditioners
50 60
HERTZ
Hazardgard
®
THE EXPERTS IN ROOM AIR CONDITIONING
HAZARDOUS LOCATION ROOM AIR CONDITIONERS
FEATURES
APPLICATIONS
UL LISTED FOR CLASS 1, DIVISION 2,
• Permanent split capacitor motor
Built to perform in the
harshest environments
GROUPS A, B, C AND D HAZARDOUS LOCATIONS.
• Hermetically sealed refrigeration system
• Environmentally sealed on/off switch and gold plated contacts in
thermostat for corrosion resistance
• Solid-state control relays for compressor and fan operation
• Offshore oil rigs, on-shore oil company
offices and refineries
• Hot gas bypass allows the air conditioner to operate at low ambient
conditions without freezing at outdoor temperatures as low as 45° F (7°C)
• Petrochemical sites and propane fill-up
stations
• Hermetically sealed reciprocating compressor is cooled during the
refrigeration cycle, which allows the unit to tolerate
higher outdoor temperatures up to 130˚ F (55°C)
• Paint and varnish storage or processing
plants
• Larger, commercial grade, enclosed fan motor with
hermetically sealed overload for arc-free operation.
Totally enclosed to assure efficient operation under
adverse electrical conditions
• Plant areas using strong solvents or
chemicals
• Unit utilizes field supplied, direct-wired, 15-amp circuit
with time-delay fuse that will tolerate current surge
without tripping the breaker
• PVC or plastics plants and processing points
• 22-gauge, G60 steel air conditioner cabinet is powder
coated for corrosion protection and to withstand years of
hard use
• High density EPS foam insulation for thermal resistance
and sound control
• Honeycomb matrix packaging resists damage during shipment and is
environmentally friendly
• Grain alcohol processors or storage sites
• Munitions plants or armories
• Recycling plants
• Furniture refinishing/stripping workshops
• Fertilizer plants
• Office complexes where methane is a byproduct
• Hazardous materials storage
• Container labs
• For analyzer houses/shelters
COILS COATED FOR CORROSION RESISTANCE
LISTED
PORTABLE AIR CONDITIONERS
183H
MODEL SH24M20
• ElectroFin® 5-stage, immersion ecoat process on 100% of metallic
surfaces on the outdoor coil provides outstanding corrosion resistance
protection in coastal or corrosive environments
Extreme A/C for Hazardous Conditions
ELECTROFIN BENEFITS:
Hazardgard is specifically designed to cool living quarters, storage areas and
other enclosures situated in hazardous locations, where specific volatile flammable
liquids or gases are handled or used within enclosed containers or systems.
• Less than 1% thermal degradation
• Excellent adhesion characteristics
®
Hazardgard meets T4 temperature classification which means unit surface temperatures will not rise above 135° C/275° F. (note: 50/60Hz model listed as T4A
for surface temperatures to 120° C/248° F). Operates at low ambient conditions
without freezing at outdoor ambient temperatures as low as 7° C/45° F. Tolerates
higher outdoor temperatures up to 55° C /130° F.
Equipment is certified in accordance with ISA 12.12.01 and NFPA 70
(National Electric Code)
5-stage ecoat
• Passed 6048 hrs.ASTM B-117 Salt Spray
ELECTROFIN MEETS THE FOLLOWING:
• MIL-C-46168 Chemical Agent Resistance
-DS2, HCI Gas
Hazardgard®
• CID A-A-52474A (GSA)
60 Hertz models
North America
• MIL-STD 810F, Method 509.4 (Sand and Dust)
14000 to 24000 Btu
Up to 9.7 EER
• MIL-DTL-12468 Decontamination Agent (STB)
50 Hertz models
International
• GM9540P-97 Accelerated Corrosion Test (120 cycles)
• ASTM B117 Salt Spray (tested by ARL for Lockheed Martin)
• MIL-P-53084 (ME)-TACOM Approval
• DPG (Douglas Proving Grounds) Soil & Water Exposure Tests
• ASTM B117-G85 Modified Salt Spray (Fog) Testing-2,000 hours
ARTICLE 501
ARTICLE 505
Class I, Div. 2, Group A and Group B
Class I, Zone 2, Group IIC
19100 to 19500 Btu
Up to 9.0 EER
Class I, Div. 2, Group B
Class I, Zone 2, Group IIB
plus hydrogen, or “+H2”
50-60 Hertz model
International-North America
Class I, Div. 2, Group C
Class I, Zone 2, Group IIB
Class I, Div. 2, Group D
Class I, Zone 2, Group IIA
50 Hertz
21000/20500 Btu
8.1/8.5 EER
Equipment is certified in accordance with ANSI/UL 484 and SASO 2681
• Outstanding chemical resistance
60 Hertz
24000/23700
8.8/8.5 EER
MODELS SH15M30A, SH20M30A, SH20M50A
• Diamonblue Advanced Corrosion Protection® on the
outdoor coil protects the coil against deterioration and
extends the life of the unit especially in coastal or
corrosive environments
Friedrich air conditioners can be found in some of
the world’s toughest locations. Oil companies rely
on us to cool offshore oil rigs in the most extreme
conditions.
SPECIFICATIONS
Hazardgard
®
Electrical Characteristics
Cooling Capacity
Model
Btu/Hr.
Volts Rated
Cooling
Cooling
Energy
Efficiency
Ratio
Amps
Watts
EER
Pints/ HR
Moisture
Removal
Air Direction
Controls
Air Circulation
Refrigerant
CFM
60 HERTZ -NORTH AMERICA
SH15M30A
14500/14000
230/208
6.9/7.5
1495/1443
9.7/9.7
4.0
8-way
375
R-410A
SH20M30A
20000/19000
230/208
8.7/9.6
2125/2021
9.4/9.4
5.5
8-way
375
R-410A
SH24M20
24000/23700
230/208
12.6/13.5
2727/2788
8.8/8.5
8.0/7.5
8-way
385
R-401A
5 0 HER T Z -IN T ERN AT ION A L
SH20M50A
19500/19100
240/220
9.8/10.3
2167/2156
9.0/9.0
5.6/5.5
8-way
425
R-410A
SH24M20
21000/20500
240/220
15.0/13.2
2600/2412
8.1/8.5
7.0/7.0
8-way
360
R-410A
Installation Information
Dimensions
INCHES
Window Width
INCHES
Depth with Depth J Box
Front
to Louvers
Model
Minimum Minimum
Extension Extension
Into Room Outside
In-Wall Installation
Finished Hole INCHES
Circuit Rating
Breaker or
T - D Fuse
Weight
Lbs.
Height
Width
Min.
Max.
Height
Width
Max. Depth
Volts - Amps
SH15M30A
15 15/16”
25 15/16”
27 3/8”
6”
3 1/16”
16 15/16”
27 7/8”
42”
16 3/16”
26 3/16”
6”
250V-15
140
167
SH20M30A
17 15/16”
25 15/16”
27 3/8”
6”
3 1/16”
16 15/16”
27 7/8”
42”
18 3/16”
26 3/16”
6”
250V-15 (230V)
166
170
SH20M50A
17 15/16”
25 15/16”
27 3/8”
6”
3 1/16”
16 15/16”
27 7/8”
42”
18 3/16”
26 3/16”
6”
250V-15
171
175
SH24M20
17 15/16”
25 15/16”
27 3/8”
6”
3 1/16”
16 15/16”
27 7/8”
42”
18 3/16”
26 3/16”
6”
250V-30
180
185
)A(
Net Shipping
250V-20 (208V)
Due to continuing engineering research and technology, specifications are subject to change without notice. Manufactured under U.S. Design
Patent DES 368, 306 decorative front; Utility Patent 5, 622, 058. MAXIMUM outdoor ambient operating temperature is 130°F. (55°C) MAXIMUM
TEMPERATURE RATING FOR CLASS I, DIVISION 2, GROUPS A,B,C,D.
For global applications, Hazardgard cooling capacities are tested in a certified laboratory at moderate (T1*) and hot (T3*) climate conditions in
accordance with SASO (Saudi Arabian Standards Organization) Standard 2681. SASO Standard 2681 is adopted from ISO Standard 5151 for testing
and rating for performance of non-ducted air conditioners and heat pumps.
* Capacity and efficiency values at each climate conditions are available upon request.
Sleeve Dimensions Drawing
)A(
Max.
Wall
Depth
Junction
Box
NOTE: Hazardgard unit
must be hard-wired.
Front
LISTED
PORTABLE AIR CONDITIONERS
183H
SIDE VIEW
Friedrich Air Conditioning Co. l 10001 Reunion Place, Suite 500 l San Antonio, TX 78216 l 877.599.5665
Printed in USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising