GE | AJCM08ACG | Spec sheet | GE AJCM08ACG Spec Sheet

GE AJCM08ACG Spec Sheet
AJCM08ACG
GE Appliances 115 Volt Built-in Cool-only Room Air Conditioner
WALL CASE DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
NOTE: When installing slide-out chassis units in through-the-wall
applications, keep louvers free. Do not restrict air flow areas.
Premium, Deluxe and Value Model
Wall Case Dimensions (in inches)
15-5/8
Parallel
115V
15 Amp
21-13/16
26
Note: When installing units in through-the-wall applications.
Do not restrict air flow areas.
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
Total volume and shelf
area are calculated by
the Association of Home
Appliance Manufacturers’
standards.
Listed by
Underwriters
Laboratories
Specification Created 2/16
15-3/4
26-1/8
AJCM08ACG
GE Appliances 115 Volt Built-in Cool-only Room Air Conditioner
Brick Block and Brick
Frame Construction
Built-in RAC Installation
(Pub. 1-G003 pg. 138) April 30.1993
INSTALLATION INFORMATION: A finished opening
Built-in RAC Installation
of 26-1/8" x 15-3/4" clear of intrusions is required. Keep
Make frame if desired or caulk
(Pub.
1-G003
clearance Built-In
of 4" from
side walls.
Brick
veneer or pg.
frame138) April 30.1993
Room
Air
Conditioners
DIMENSIONS (IN INCHES)
Fill open cells
with mortar
or insulation
Plaster Line
between case and siding
Trim Molding
walls should
have
wood studding
surrounding case
to
Wall
Opening
for RAB36/37/38
Case
Lintel
(if desired)
provide firm anchoring with screws. Case can be fastened
Make frame if desired or caulk
A finished openingBuilt-In
of 26-1/8"
x 15-3/4",
clear of
Room
Air
Conditioners
directly to brick or block walls with screws sunk in lead
between case and siding
intrusions, is required. Keep clearance of 4" from
expansionside
shields.
Wall Opening
for RAB36/37/38
Case
OUTSIDE
INSIDE
walls. Brick veneer
or frame walls
should have
16-7/8
A
finished
opening
of
26-1/8"
x
15-3/4",
clear
of
woodshould
studding
surrounding
provide
firm
NOTE: Units
be caulked
on allcase
fourtosides
of case
15-3/4
intrusions,
is
required.
Keep directly
clearance of 4" from
anchoring
withto
screws.
Case
can
be fastened
26-1/8
to the building
exterior
assure
building
integrity.
sidewith
walls.
Brick sunk
veneer
or frame walls should have
to brick or block walls
screws
in lead
Caulking
WALL CASE
FOR shields.
TENANT
OPTION
wood
studdingINSTALLATION
surrounding case to provide firm
expansion
15-3/4
When the air conditioner isanchoring
offered as with
a tenant
option,
this
Drip Rail
screws.
Case
can be fastened directly
26-1/8
wall case provides protection
elements.
to against
brick or outside
block walls
with screws sunk in lead
Flexible Mounting Position
expansion
shields.
Frame Construction
RAB48 – includes wall case, exterior grille,
steel closure panel and two layers of insulation.
STANDARD WALL CASE RAB46
Solid-sided wall case fabricated of galvanized steel
with baked enamel finish. Welded areas are coated with
a sealing compound to help resist rust and corrosion.
Polymer gasket surrounds opening to assure tight weather
seal. Aluminum grille (RAG13) is included. Panels on
interior and between case and grille provide weather
protection prior to installation of chassis. Provide
firm anchoring with screws. Case can be fastened
directly to brick or block walls with screws sunk in
lead expansion shields.
Lintel
Frame
Construction
Lintel
15-3/4
26-1/8
15-3/4
26-1/8
Fill open cells
with mortar
Brick Block and Brick or insulation
Frame Construction
Fill open cells
with mortar
Brick Block and Brick or insulation
Frame Construction
Plaster Line
Trim Molding
(if desired)
Lintel
OUTSIDE
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website Caulking
at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
16-7/8
LintelINSIDE
OUTSIDE
16-7/8
Plaster Line
Trim Molding
Total volume and shelf
area are calculated by
(if desired)
the Association of Home
Appliance Manufacturers’
standards.
Listed by
Underwriters
Laboratories
INSIDE
Specification Created 2/16
Drip Rail
Caulking
Flexible Mounting
Position
Drip Rail
AJCM08ACG
GE Appliances 115 Volt Built-in Cool-only Room Air Conditioner
FEATURES AND BENEFITS
8,200 Cooling BTU
9.8 EER, 9.6 CEER
115 Volts
ENERGY STAR® qualified
R-410A refrigerant
Electronic controls with remote
Electronic digital thermostat control
On
Off
Filter reset
Delay Hrs
On Off
Cool
Fan
72
Reset
Filter
Temp
- +
Hi
Med
Low
Mode
Power
On/Off
Four-way air direction
Up-front, washable air filter
3 cooling/ 3 fan speeds
Power interruption restart - Restarts the unit at the setting
prior to the loss of power
AJCM12DCF
Model AJCM08ACG – Soft Gray
Specification Created 2/16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising