Frigidaire | FFRP152HT4 | Spec sheet | Frigidaire FFRP152HT4 Spec Sheet

Packaged Terminal Air Conditioner (PTAC)
FFRP152HT4
Air Conditioner /
Heat Pump /
Backup Electric Heater
Product Dimensions
Height
16"
Width
42"
Depth
21-3/4"
More Easy-To-Use Features
Comfort Control Design
Simple controls allow guests to
customize their settings, while quiet,
uniform air movement keeps rooms
comfortable.
Smart Self-Check
Provides nine diagnostic points for selfcheck and correction of fault conditions.
Eco-Friendly
Frigidaire® uses R-410A refrigerant that’s
not harmful to the earth’s ozone layer
and meets U.S. Environmental Protection
Agency requirements.
Effortless™ Operation
Simple, intuitive room controls are easy
for guests to operate — ensuring a
relaxing, more comfortable stay. Features
like Effortless™ Restart and Ready-Select®
controls reduce maintenance calls.
Performance
BTUs
Cool
14,500 /14,200
Backup Electric Heater
17,000 / 13,900
Heat Pump
13,300 / 13,000
Signature Features
Corrosion Guard
Dry Mode
A corrosion-resistant fin coating extends
operation life and your investment,
plus it is easier to maintain in coastal
environments.
Dry Mode feature will help manage and
reduce the humidity content within the
living space, making it more comfortable.
Effortless™ Maintenance
SilentDesign™
With Frigidaire’s reputation for durability,
easy maintenance, availability of reliable
parts and service you can count on,
you can be sure that you’re getting the
highest-quality performance.
Sound reduction package.
frigidaire.com
Packaged Terminal Air Conditioner (PTAC)
FFRP152HT4
Performance
BTU (Cool)
14,500 /14,200
BTU (Backup Electric Heater)
17,000 / 13,900
BTU (Heat Pump)
13,300 / 13,000
Dehumidification (Pints / Hour)
3.5
Cool Area (Sq. Ft.)
830
Energy Efficiency Ratio
10.4
Air Conditioner / Heat Pump / Backup Electric Heater
PTAC Nomenclature
FF
RP
07
Amps (Cool)
Amps (Backup Electric Heater)
Amps (Heat Pump)
Watts (Cool)
RAC P-TAC Models
Frigidaire Baseline
L
CORROSION
GUARD
PTAC
Electrical
Volts
2
T
3
DESIGN YEAR
T = 2017
230 / 208
6.2 / 6.7
21.8 / 19.7
6.2 / 6.7
1,390 / 1,365
Watts (Backup Electric Heater)
5,000 / 4,089
Watts (Heat Pump)
1,255 / 1,225
Cable Included
Yes
Length of Power Cord
5.5'
Circuit Breaker
30A
Plug Type (NEMA)
LCDI (6-30P)
BTU OUTPUT
07 = 7,200 / 7,000
09 = 9,400 / 9,200
12 = 11,800 / 11,600
15 = 14,500 / 14,200
HEAT
L = Electric
H = Heat Pump
230/208V
2 = 15A
3 = 20A
4 = 30A
265V
5 = 15A
6 = 20A
7 = 30A
Features
Fin Coating
Corrosion Guard
Dry Mode
Yes
Electronic Controls
Ready-Select® Controls
Front Desk Control Ready
Yes
Fan Speeds (Dry / Cool / Fan / Heat)
1/2/2/2
Noise Level Indoors (High / Low)
54 / 51
Quiet Start-Up
Yes
Low Voltage Start-Up
Yes
Random Restart Protection
Yes
Effortless™ Auto Freeze Protection
Yes
Energy Save
Yes
24-Hour On / Off Timer
Yes
Air CFM (High / Low)
341 / 306
Air Direction Control
Auxiliary 2-Way
Air Intake
Fresh or Recycled
Filter Type
Nylon Mesh
Filter Access
Slide-Out
Slide-Out Chassis
Yes
Commercial Grade Warranty1
Yes
D
A
Certifications
Safety Certification
UL, CUL & CSA
Performance
AHRI & CEC
C
B
Specifications
Refrigerant
R410a
Charge
38.8 oz.
Shipping Weight (Approx.)
146 Lbs.
Warranty 5 year sealed system / 2 year full parts and labor.
1
NOTE: For planning purposes only. Always consult
local and national electric codes. Refer to Product
Installation Guide for detailed installation instructions
on the web at frigidaire.com.
Plug Type (NEMA)
6-30P
Product Dimensions
2
Wall Cutout Dimensions
A - Height
16"
Height
16-1/4"
B - Width
42"
Width
42-1/4"
C - Depth (Overall Unit)
21-3/4"
D - Depth (Inside Sleeve)
13-3/4"
Max. Wall Thickness
13-1/2"2
Unless the PTAC unit is installed with a wall sleeve.
Accessories information available
on the web at frigidaire.com
USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca
FFRP152HT4 01/17
© 2017 Electrolux Home Products, Inc.
Specifications
subject to change.
Packaged Terminal Air Conditioner (PTAC)
Air Conditioner / Heat Pump / Backup Electric Heater
FFRP152HT4
Rearward
Rearward Slope
Slope
Wall Sleeve
Wall Sleeve
Adapter
Adapter
1/4" Slope
1/4" Slope
Accessory
Accessory
Outdoor Grille
Outdoor Grille
Accessory Outdoor
Grille
Front Panel
Front Panel
Accessory Wall Sleeve
Accessory
Accessory
Wall Sleeve
Wall Sleeve
Outside
Outside Wall
Wall Inside
Inside Wall
Wall
Chassis
Front Panel
Chassis
Chassis
Plug Type (NEMA)
6-30P
Product Dimensions
Wall Cutout Dimensions
Height
16"
Height
16-1/4"
Width
42"
Width
42-1/4"
Depth (Overall Unit)
21-3/4"
Depth (Inside Sleeve)
13-3/4"
Max. Wall Thickness
13-1/2"
PTAC Specifications
Replacement Installation
• Product Shipping Weight (approx.) – 146 Lbs.
• An electrical supply with grounded three-prong receptacle is required.
• When replacing existing PTAC with new unit, refer to Product
The power supply circuit must be installed in accordance with current
edition of National Electrical Code (ANSI/NFPA 70)
and local codes & ordinances.
• Voltage Rating – 230V / 208V / 60 Hz
• Amps @ 230/208V Volts = (Cool) 6.2 / 6.7 Amps /
(Backup Electric Heater) 21.8 / 19.7 Amps / (Heat Pump) 6.2 / 6.7 Amps
• Always consult local and national electric codes.
• Recommended Circuit Breaker – 30 Amps
• Unit equipped with 230/208V 3-wire power supply cord, NEMA plug
type 6-30P, approximately 66" long.
• In order for condensate water to drain properly inside the unit, the
sleeve must be installed properly: Level from right to left with a slight
1/4" rearward pitch from the indoor side to the outdoor side as shown in
the illustration above. Refer to the Installation Instructions on the web.
• The drain kit listed on the Frigidaire® PTAC Accessories page can
be used for an internal or external drain. This applies to new and
replacement installation.
Installation Guide on web to identify existing wall-sleeve manufacturer
and size compatibility. If proper installation and slope are suspect,
then correct installation of Frigidaire® PTAC Sleeve options
recommended.
• For any sleeve retrofit application, be sure that the foam seals
(factory-installed on the tube sheets) provide a good seal between
the grille and the outdoor coil tube sheets. These foam seals provide
a barrier that stops air from the inside mixing with air on the outside
(known as air recirculation).
• Using Frigidaire® wall sleeve with Non-Frigidaire grille requires
installation of an Accessory Baffle Kit, which ensures a good seal
between the unit and exterior grille to prevent air recirculation. Air
recirculation is a large contributor to performance loss and premature
damage to major components.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
*See Frigidaire® PTAC accessories pages attached for optional accessories.
New Installation
• For new installation, Frigidaire® PTAC Sleeves are available and
recommended for proper installation. See accessories pages for
sleeve options.*
• Standard PTAC installation requires 13-1/2" maximum wall thickness,
unless a wall sleeve is used.
• If the PTAC unit protrudes more than 4", then it is suggested that it be
installed with a subbase. See accessories pages for subbase options.
USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca
FFRP152HT4 01/17
© 2017 Electrolux Home Products, Inc.
Specifications
subject to change.
Packaged Terminal
Air Conditioner (PTAC)
ACCESSORIES
Wall Sleeves and Drain Kit
Metal Wall Sleeve & Accessories
5304482701 Steel Sleeve – Insulated
5304483759 16" Extended Sleeve – Insulated
5308815304 18" Extended Sleeve – Insulated
5308815305 24" Extended Sleeve – Insulated
5304483760 3" Sleeve Adapter
Metal
Wall Sleeve
These fully insulated sleeves are made of electro-galvanized
steel that resists corrosion, and welded areas are sealed with
a rust preventive. White powder coating matches PTAC units.
Sliding keyhole grille attachments enable easy, one-person
installation from the inside.
Polymer
Wall Sleeve
Polymer Wall Sleeve
5308815302 Insulated
Utilizes fiberglass-reinforced polyester compound to produce
a durable, noncorrosive wall case that provides superior sound
absorption, reduces heat loss and prevents sleeve sweating.
(Requires use of a Polymer Architectural Grille.)
Condensation Universal Drain Kit
5304480570 1-Pack
Controls condensate from the PTAC unit and can be used for
exterior or interior drain systems. Includes 1/2" O.D. copper drain
tubes with a short right angle tube and a 6" straight tube to suit
the application. (Recommended for all new sleeve installations.)
Condensation Universal Drain Kit
Outdoor Grilles
Stamped
Aluminum
Grille
Stamped Aluminum Outdoor Grille
5304480557 Clear Anodized Aluminum Finish
Cost-effective, one-piece stamped grille is made from durable
anodized aluminum. The grille is lightweight, has a clear finish
and is easy to install from inside the room.
Architectural Aluminum Outdoor Grilles
5304480558 Clear Anodized Aluminum Finish
5308815313 Dark Brown
530448055X Customized Color
Enhances the appearance of any building. Made of a durable,
anodized aluminum that offers weather resistance. Sliding
keyhole attachment enables easy installation onto Frigidaire®
metal wall sleeve.
Architectural
Aluminum
Grille
Polymer Architectural Outdoor Grilles
Polymer
Architectural
Grille
FR_PTAC_ACC 01/17
5308815310 Brown
5308815312 Alpine Beige
Blends with most building exteriors. Its durable design offers
protection, has an enhanced appearance and provides superior
weather resistance. (Requires use of a Polymer Wall Sleeve.)
Packaged Terminal
Air Conditioner (PTAC)
ACCESSORIES
Subbases and Leveling Legs
Decorative Subbase
Decorative
Subbase
5308815315 Black
Made of heavy-gauge steel to provide support for the wall sleeve,
the subbase mounts directly to the wall sleeve and has adjustable
leveling legs.
Black Electrical Subbases
5304482886 230V/15A
5304482891 265V / 30A
5304482888 230V / 30A
5304482890 265V / 20A
5304482887 230V / 20A
Electrical
Subbase
5304482698
265V Subbase Disconnect Switch
5304490211
Hardwire Kit, Conduit and Plate
(For 230V and 265V)
Offers the same features as the decorative subbase, plus a
factory-installed electrical junction box containing a receptacle
for corded PTAC units.
Leveling Legs
Leveling Legs
5304480575
Attach easily to the wall sleeve and offer accurate leveling and
support for units without a subbase. Adjustable from 3-1/4" to 5-1/2".
Air Filters
Air Filters
5304482892 10-Pack
Changing filters periodically ensures a healthy room environment,
proper airflow, temperature control and energy efficiency.
Air Filters
Wall Thermostats
Wireless Digital Wall Thermostat
FFTSTATWL Non-Programmable (Includes Wireless Receiver)
Wall Thermostats
Allows control without having to worry about wiring. Easy to install
and use. Large intuitive LCD screen improves user interaction.
Wired Digital Wall Thermostats
5304482700 Programmable
5304483050 Non-Programmable
Offers auto-changeover, 2-stage heating and cooling, as well as
emergency heating mode for heat pump.
Laminated Insert
FPTAC0511
FFTSTATWL
5304483050
Informs guests that unit is controlled by wall thermostat.
Miscellaneous
Lateral Duct Kit
5304490206
Lateral Duct Kit
Allows one PTAC unit to heat or cool two rooms. Kit mounts to
wall sleeve and can be installed for either right- or left-side duct
applications.
Baffle Kit
5304484585
FR_PTAC_ACC 01/17
Baffle Kit for use on non-standard grilles.
Download PDF

advertising