GREE | MULTI24HP230V1AO | Multi Technical Product Guide | Gree MULTI24HP230V1AO Multi Technical Product Guide

Technical Product Guide
+Multi Zone Inverter
Heat Pump Systems
World Class Comfort
Table of Contents
+Multi Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
+Multi Outdoor Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
+Multi Neo Wall Mount Units . . . . . . . . . . . . . . . . . . . . . . . . 35
+Multi Ceiling Cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
+Multi Slim Concealed Ducts . . . . . . . . . . . . . . . . . . . . . . . . 54
+Multi Universal Floor/Ceiling . . . . . . . . . . . . . . . . . . . . . . . 69
+Multi Mini-Floor Consoles . . . . . . . . . . . . . . . . . . . . . . . . . 78
+Multi Wired Tether Controller . . . . . . . . . . . . . . . . . . . . . . 86
Refer to individual listings within each of the above sections, for specific page references for:
Product Nomenclature, Features and Benefits, Product Performance Data, Dimensional Specifications,
Clearance Specifications, Electrical Wiring, Condensate Removal, Indoor Unit Combinations.
PRODUCT OVERVIEW
SUPERIOR DESIGNS PROVIDE EASY SOLUTIONS TO COMPLEX PROBLEMS
GREE Ductless Multi Zone systems provide quiet comfort and energy efficient heating and cooling in up to
five different rooms – without ductwork. For most residential and light commercial applications, this is the ideal
solution to balance comfort, efficiency and ease of installation. This Inverter-driven system offers Seasonal
Energy Efficiency Ratings (SEER) up to 16. With individual room control and variable speed compressor
operation, comfort is boosted throughout your home or office, while utility bills are held in check.
Gree’s exclusive G-10 Inverter technology powers the twin rotary compressor inside the Multi Zone
outdoor compressor section. The G-10 Inverter constantly adjusts the compressor speed to maintain
a comfortable room temperature. This saves energy, reduces outdoor noise and maintains a steady
room temperature by eliminating the harsh starts and stops of conventional systems.
When laying out a new project, you’ll appreciate the flexibility of Gree’s Multi Zone Systems. A single outdoor unit
can simultaneously power up to five indoor units while eliminating expensive ductwork. Without those ducts, your
installation is simpler, faster and more cost-effective. And the flexibility doesn’t stop there, as you can also mix
and match your choice of Wall Mount, Ceiling Cassette, Concealed Duct, Universal Floor/Ceiling and Mini Floor
Console indoor units to create a unique heating and cooling system to perfectly fit any project.
No pipe sweating
Outdoor Unit
No sweating is needed for the pipe connection
between the indoor and outdoor units. All
piping connections are flared to simplify and
ease the piping installation.
Indoor Unit
Simple Wiring
Transmission System
No special or hard-to-find communication
wire is needed between the indoor and
outdoor units. The system uses common
14-4 AWG stranded copper THHN 600V
wire. The system’s communication is ready
as soon as the electrical wiring between the
indoor and outdoor units is complete.
Power
Supply
High Lift Design
1st Branching
Section
50ft
50ft
Height Difference
Between Indoor Units:
Allows up to 262 feet of pipe length
Energy Saving
Multi Zone systems allow each room to be individually controlled. Only those rooms requiring air
conditioning (or heating) are cooled (or heated), and all of it is accomplished without ductwork.
In addition, Gree’s G-10 inverter technology reduces energy waste, maximizes efficiency and
achieves up to 16 SEER.
2
Height Difference
Between Indoor Unit
and Outdoor Unit:
82ft
Gree’s High Lift design allows for extended
piping length, up to 262 feet total, as well as
50 feet of vertical lift from the condensing
units. This allows for greater flexibility in the
layout of the system.
From Outdoor Unit to
the Indoor Unit:
82ft
PRODUCT OVERVIEW
Self-Diagnostics System
Each indoor and outdoor unit continuously runs
a series of multi-point diagnostic tests on the
system, to automatically scan for unacceptable
operating conditions or malfunctions. If such
conditions occur, the system takes corrective
action or stops. The fault code will be shown
on the indoor, outdoor and wired controller displays.
Problems and system status are displayed with
comprehensive diagnostic codes to simplify system
troubleshooting and shorten repair times.
Diagnostic
Code
E1
E2
E3
E4
E5
E6
E7
E9
F4
Malfunction
Compressor High Pressure Protection
Indoor Coil Anti-Freeze Protection
Low Pressure Protection
High Discharge Temperature Protection
Compressor High Temperature Protection
Indoor/Outdoor Communication Failure
Heating & Cooling Modes Conflict
Condensate Water Too High
Outdoor Coil Sensor Failure
Flexible Design
Gree’s Multi Zone systems have many advantages
for both the property owner and the installer.
Up to five indoor units, powered by a single
outdoor unit, results in flexible zoning solutions
for almost any application. Various styles of
indoor units may be mixed and matched in any
combination to create a unique, multiple zone
heating and cooling system. Choose from Wall
Mount, Ceiling Cassette, Slim Duct, Universal
Floor/Ceiling and Mini Floor Console indoor units.
All are lightweight and compact enough to be
installed on the wall or in any ceiling space.
Gree’s Multi Zone components use state-of-the
art intelligent controls to generate the ultimate
in room comfort. G-10 Inverter technology
delivers the exact level of required capacity (from
10% to 100%) to maintain room temperature and
humidity in the comfort range. The optimized PID
controls maintain the room temperature within
less than ±1.0°F of the room setpoint temperature.
The result is a virtually constant room temperature
without the typical fluctuations that occur with a
conventional fixed speed ON/OFF system.
Ductless Saves Money
Realize energy savings by eliminating heat loss
from inefficient and leaky ductwork. The average
ducted air distribution system could reduce
overall system efficiency by up to 30 percent.
Eliminating ductwork allows you to downsize
equipment while upsizing performance.
3
Cooling
Gree Inverter Control System
Conventional Fixed Speed System
Room temp.
Intelligent Control
One outdoor unit
can power up to
5 indoor units.
MULTI OUTDOOR UNITS
Models:
MULTI18HP230V1AO
MULTI24HP230V1AO
MULTI30HP230V1AO
MULTI36HP230V1AO
MULTI42HP230V1AO
+Multi Outdoor Units
Table of Contents
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Product Nomenclature/AHRI Certification . . . . . . . . . . . . . . 8
Product Performance Data . . . . . . . . . . . . . . . . . . . . . . . . 9-13
Dimensional Specifications . . . . . . . . . . . . . . . . . . . . . . . . 14-16
Clearance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Electrical Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19
Condensate Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Indoor Unit Combinations . . . . . . . . . . . . . . . . . . . . . . . . 20-28
Extended Performance Ratings . . . . . . . . . . . . . . . . . . . 29-33
+Multi Outdoor Units
Each +Multi heat pump is powered by Gree’s energy efficient G-10 Inverter and a variable speed compressor. These units can
heat and cool up to five zones without distribution boxes, and all offer the G-10 advantages of energy savings, noise reduction
and room temperature consistency. Each outdoor coil also features a corrosion-resistant Gold Fin coating to withstand corrosive
environments and to further promote energy efficiency.
FEATURES AND BENEFITS
High Efficiency G-10 Inverter
The G-10 Inverter uses a broad range of variable frequencies to drive the compressor, marking the
highest level of inverter control technology available today. Unlike conventional technology that
generally regulates room temperature by running at maximum capacity and then shutting off
completely, G-10 Inverter technology eliminates these harsh starts/stops. This cutting edge functionality
results in quicker arrival at desired temperatures and superior maintenance of consistent comfort
levels. Higher efficiency and significant energy savings? Yes, it yields those too.
Heat Pump Advantage
Multi Zone heat pumps, powered by the G-10 Inverter, provide the same heating capacity as electric
heat, while using as little as 1/3 the electricity.
Intelligent Defrost
The Intelligent Defrost function increases room comfort and saves energy by eliminating unnecessary
defrost cycles. In heating mode, the control system monitors the outdoor coil for frost buildup,
and the system switches to defrost mode only when frost buildup is actually detected. This avoids
unnecessary and wasteful defrosts.
Time Guard
Among the system’s many safeties is a Time Guard function to prevent rapid cycling of the compressor.
A protective three-minute time delay restricts compressor restarts after shutoff.
Gold Fin Condenser
The system’s corrosion-resistant Gold Fin condenser coating (1500hr salt spray rating) is made with
a gold-colored anti-corrosion epoxy. This technology maintains excellent heat transfer properties
while extending coil life against damage from salt air and salt water in seacoast installations.
6
FEATURES AND BENEFITS
Low Voltage Start Up
Having stable electrical power is not always an option. The Gree Multi Zone units will operate from
170v to 265v which is suitable for unstable power supply areas.
Self-Diagnosis
With an on-board computer using real-time diagnostics, the Gree Multi Zone system helps to
prolong its own life. The automatic diagnosis feature continuously scans for unacceptable operating
conditions or malfunctions. If such conditions occur, the system takes corrective action or stops.
Fault codes are shown on the unit display to facilitate easy troubleshooting and repair.
Agency Listings
All systems are listed with AHRI (Air conditioning, Heating, and Refrigeration Institute) and are
ETL Certified per standards.
7/5 Year Limited Warranty
Enjoy one of the most comprehensive warranties in the industry. Seven (7) years
on compressor and Five (5) years on all parts.
7
+Multi Outdoor Units
NOMENCLATURE
MULTI 42 HP
230V
Series Designation
1 A O
Product Type
S - System
O - Outdoor Units
H - Indoor High Wall
D - Indoor Duct
C - Indoor Cassette
F - Indoor Floor/Ceiling
MULTI - Multi Zone
Cooling Capacity
18 - 18,000 BtuH
24 - 24,000 BtuH
30 - 30,000 BtuH
36 - 36,000 BtuH
42 - 42,000 BtuH
Revision Level
Style/Color Designation
Model Type
AC - Cooling Only
HP - Heat Pump
HC - Heat/Cool
Electrical Rating
230V - 208/230V 60Hz 1PH
115V - 115V 60Hz 1PH
AHRI CERTIFICATION
MODEL NUMBER
BRAND
AHRI CERTIFICATION
MULTI18HP230V1AO
GREE
7084754
MULTI24HP230V1AO
GREE
7084908
MULTI30HP230V1AO
GREE
7084759
MULTI36HP230V1AO
GREE
7084898
MULTI42HP230V1AO
GREE
7084899
MULTI48HP230V1AO
GREE
7117354
MULTI56HP230V1AO
GREE
7117355
8
PERFORMANCE SPECIFICATIONS
Cooling
COOLING CAPACITY
MODEL NUMBER
SEER
EER
RATED
(BtuH)
RANGE
(BtuH)
OUTDOOR TEMP
OPERATING RANGE
MIN
MAX
MULTI18HP230V1A
16
10.2
18,000
(7,000-21,000)
23 °F
118 °F
MULTI24HP230V1A
16
8.2
26,000
(7,500-33,000)
23 °F
118 °F
MULTI30HP230V1A
16
7.3
29,000
(7,500-34,000)
23 °F
118 °F
MULTI36HP230V1A
16
8.0
34,000
(8,530-34,120)
23 °F
118 °F
MULTI42HP230V1A
16
9.3
40,000
(8,530-46,403)
23 °F
118 °F
Heating
HEATING CAPACITY
MODEL NUMBER
HSPF
RATED
(BtuH)
RANGE
(BtuH)
OUTDOOR TEMP
OPERATING RANGE
MIN
MAX
MULTI18HP230V1A
8.2
19,000
(8,530-22,600)
5 °F
80 °F
MULTI24HP230V1A
8.2
29,000
(7,500-35,000)
5 °F
80 °F
MULTI30HP230V1A
8.2
30,400
(7,500-36,000)
5 °F
80 °F
MULTI36HP230V1A
8.2
35,800
(10,663-40,944)
5 °F
80 °F
MULTI42HP230V1A
8.2
44,500
(10,663-47,768)
5 °F
80 °F
Notes:
1. Ratings
are based on: Cooling Standard: 80°F (26.7°C) db, 67°F (19.4°C) wb air entering indoor unit and 95°F (35°C) db air entering
outdoor unit. Heating Standard: 70°F (21.1°C) db air entering indoor unit and 47°F (8.3°C) db, 43°F (6.1°C) wb air entering outdoor unit.
2. Ratings are based on 25 ft. (7.62 m) of interconnecting refrigerant lines.
3. All system ratings are based on fan coil units operating at high fan speed. Consult Physical Data tables for air flows at selected fan speeds.
Legend:
EER - Energy Efficiency Ratio
HSPF - Heating Seasonal Performance Ratio
SEER - Seasonal Energy Efficiency Ratio
MODEL NUMBER
BRAND
NUMBER OF PORTS
FOR INDOOR UNITS
MULTI18HP230V1AO
EXV
2
MULTI24HP230V1AO
EXV
3
MULTI30HP230V1AO
EXV
4
MULTI36HP230V1AO
EXV
4
MULTI42HP230V1AO
EXV
5
9
+Multi Outdoor Units
AIR FLOW DATA
Outdoor Unit
MODEL NUMBER
Air Flow (CFM)
MULTI18HP230V1A
1,530
MULTI24HP230V1A
1,530
MULTI30HP230V1A
1,530
MULTI36HP230V1A
2,177
MULTI42HP230V1A
3,237
SOUND DATA
Outdoor Unit
MODEL NUMBER
SOUND POWER
SOUND PRESSURE
MULTI18HP230V1A
66 dBA
56 dBA
MULTI24HP230V1A
66 dBA
56 dBA
MULTI30HP230V1A
66 dBA
56 dBA
MULTI36HP230V1A
69 dBA
59 dBA
MULTI42HP230V1A
68 dBA
58 dBA
Note:
1. Sound pressure ratings are estimated sound pressure measurements, 3 feet from unit.
2. Sound power ratings are per AHRI 270 and AHRI 350.
PRODUCT WEIGHT
MODEL NUMBER
PRODUCT WEIGHT
Net Operating
Gross Shipping
MULTI18HP230V1A
95 lbs.
106 lbs.
MULTI24HP230V1A
135 lbs.
146 lbs.
MULTI30HP230V1A
153 lbs.
165 lbs.
MULTI36HP230V1A
161 lbs.
172 lbs
MULTI42HP230V1A
225 lbs.
247 lbs.
10
REFRIGERATION SPECIFICATIONS & DATA
Refrigerant Charge
FACTORY
SYSTEM
CHARGE
MAX TOTAL PIPE
LENGTH W/O ADDING
REFRIGERANT
ADDITIONAL
CHARGE
LEVEL
MODEL NUMBER
REFRIGERANT
TYPE
MULTI18HP230V1A
R-410A
48 oz.
33 ft.
0.2 oz./ft.
MULTI24HP230V1A
R-410A
78 oz.
98 ft.
0.2 oz./ft.
MULTI30HP230V1A
R-410A
78 oz.
131 ft.
0.2 oz./ft.
MULTI36HP230V1A
R-410A
102 oz.
131 ft.
0.2 oz./ft.
MULTI42HP230V1A
R-410A
169 oz.
164 ft.
0.2 oz./ft.
PIPING LENGTH REQUIREMENTS
L =L1
+
L2
+
+
...Ln
LS
LTOTAL =L1 + L2 + ......Ln
Refrigerant Piping Lengths
MODEL NUMBER
MIN PIPE LENGTH
PER INDOOR
UNIT (Ln)
MAX PIPE
LENGTH PER
INDOOR UNIT (Ln)
MAX TOTAL PIPE
LENGTH PER
INDOOR UNIT (LTOTAL)
MULTI18HP230V1A
10 ft.
33 ft.
66 ft.
MULTI24HP230V1A
10 ft.
66 ft.
230 ft.
MULTI30HP230V1A
10 ft.
66 ft.
230 ft.
MULTI36HP230V1A
10 ft.
82 ft.
230 ft.
MULTI42HP230V1A
10 ft.
82 ft.
262 ft.
11
+Multi Outdoor Units
PIPING HEIGHT REQUIREMENTS
H2
H1
L1
L2
L3
...Ln
Refrigerant Piping Height
MODEL NUMBER
MAX ELEVATION
BETWEEN OUTDOOR &
INDOOR UNITS (H1)
MAX ELEVATION
BETWEEN
INDOOR UNITS (H1)
MULTI18HP230V1A
33 ft.
16 ft.
MULTI24HP230V1A
66 ft.
25 ft.
MULTI30HP230V1A
66 ft.
25 ft.
MULTI36HP230V1A
82 ft.
25 ft.
MULTI42HP230V1A
82 ft.
25 ft.
12
ELECTRICAL DATA
Outdoor Unit
MODEL NUMBER
Rated Power
Supply
(volt-phase-hz)
Voltage
Range
(volts)
MULTI18HP230V1A
208/230v-1ph-60hz
187-253
1.7
1.6
MULTI24HP230V1A
208/230v-1ph-60hz
187-253
3.1
2.8
MULTI30HP230V1A
208/230v-1ph-60hz
187-253
3.5
2.9
MULTI36HP230V1A
208/230v-1ph-60hz
187-253
4.3
3.6
MULTI42HP230V1A
208/230v-1ph-60hz
187-253
4.4
4.6
Rated Input Power
(KW)
COOLING
HEATING
Outdoor Unit
MODEL NUMBER
MIN CIRCUIT
AMP (MCA)
Rated Input CURRENT (amps)
COOLING
HEATING
MAX FUSE
SIZE (amps)
MULTI18HP230V1A
7.6
7.5
13
20
MULTI24HP230V1A
13.5
12.4
20
30
MULTI30HP230V1A
15.3
12.6
26
45
MULTI36HP230V1A
19.2
15.8
28
45
MULTI42HP230V1A
19.5
20.5
29
50
Outdoor Unit
MODEL NUMBER
COMPRESSOR
RLA (amps)
LRA (amps)
OUTDOOR FAN
RLA (amps)
HP
INPUT POWER
(watts)
MULTI18HP230V1A
9.6
27
0.5
1/12
60
MULTI24HP230V1A
14.7
45
0.6
1/12
60
MULTI30HP230V1A
19.6
45
0.6
1/12
60
MULTI36HP230V1A
21.0
45
0.7
1/8
120
MULTI42HP230V1A
21.5
67
1.1
1/6
140
Legend:
RLA – Rated Load Amps
HP – Horse Power
13
+Multi Outdoor Units
DIMENSIONAL SPECIFICATIONS
Model No: MULTI18HP230V1A
18,000 BtuH
Suction/Gas Line Port Size
Port A
Port B
3/8-in OD Flared
3/8-in OD Flared
Liquid Line Port Size
Port A
Port B
Model No: MULTI24HP230V1A
1/4-in OD Flared
1/4-in OD Flared
24,000 BtuH
Suction/Gas Line Port Size
Port A
Port B
Port C
3/8-in OD Flared
3/8-in OD Flared
3/8-in OD Flared
Liquid Line Port Size
Port A
Port B
Port C
14
1/4-in OD Flared
1/4-in OD Flared
1/4-in OD Flared
DIMENSIONAL SPECIFICATIONS
Model No: MULTI30HP230V1A
30,000 BtuH
Suction/Gas Line Port Size
Port A
Port B
Port C
Port D
3/8-in OD Flared
3/8-in OD Flared
3/8-in OD Flared
3/8-in OD Flared
Liquid Line Port Size
Port A
Port B
Port C
Port D
Model No: MULTI36HP230V1A
1/4-in OD Flared
1/4-in OD Flared
1/4-in OD Flared
1/4-in OD Flared
36,000 BtuH
Suction/Gas Line Port Size
Port A
Port B
Port C
Port D
3/8-in OD Flared
3/8-in OD Flared
1/2-in OD Flared
5/8-in OD Flared
Liquid Line Port Size
Port A
Port B
Port C
Port D
15
1/4-in OD Flared
1/4-in OD Flared
1/4-in OD Flared
3/8-in OD Flared
+Multi Outdoor Units
DIMENSIONAL SPECIFICATIONS
42,000 BtuH
Suction/Gas Line Port Size
Port
Port
Port
Port
Port
A
B
C
D
E
3/8-in OD Flared
3/8-in OD Flared
1/2-in OD Flared
1/2-in OD Flared
5/8-in OD Flared
Liquid Line Port Size
Port
Port
Port
Port
Port
16
A
B
C
D
E
1/4-in OD Flared
1/4-in OD Flared
1/4-in OD Flared
1/4-in OD Flared
3/8-in OD Flared
MINIMUM OUTDOOR CLEARANCE SPECIFICATIONS
The unit installation must meet or exceed the following minimum clearances for proper operation.
A
Air Inlet
E
D
B
C
Air Outlet
Outdoor Unit
Minimum Distance
A
20 in
B
24 in
C
78 in
D
12 in
E
20 in
17
+Multi Outdoor Units
ELECTRICAL WIRING
The main power is supplied to the outdoor unit. System must be on a single dedicated circuit. Use appropriate
wire size and circuit breaker (or fuse) size for proper system overcurrent protection. Follow all local building
codes and NEC (National Electrical Code) regulations.
Interconnecting Cable Wiring Diagram
The indoor units are powered by the outdoor unit. The interconnecting cable between the outdoor and indoor
units must be a 14/4 AWG stranded copper conductors THHN 600V unshielded wire. The interconnecting cable
should not be buried underground and must be recognized by UL or ETL and CSA certified.
Note: Use shield cable if installation is in close proximity of RF and EMI transmitting devices.
18
ELECTRICAL WIRING
Local codes may require a disconnect switch within sight of the indoor unit. For these installations, use
a DFS Disconnect Switch Accessory Kit (Part No: DFS-SWITCH-A) to break wires going to the N(1), 2, 3,
terminals on the indoor unit, as shown in the wiring diagram below:
Interconnecting Cable with Disconnect Switch Wiring Diagram
CONDENSATE REMOVAL
Install condensate drain to bottom of outdoor unit to safely and effectively route condensate water to a
safe location. Use a flexible condensate drain hose to fit over the factory 5/8-inch (16mm) drainage port.
The high wall indoor units have an internal condensate trap. Adding an external trap is not required.
All condensate drains must meet local codes and regulations. If adequate gravity drainage cannot be
provided, a field-installed condensate pump must be used. Refer to manufacturer’s installation instructions,
specifications and operating details supplied with condensate pump.
19
+Multi Outdoor Units
INDOOR UNIT COMBINATIONS
SELECTION CRITERIA
When selecting a variable speed system, match the system capacity to the calculated load of the building.
Since a variable speed system can accommodate a wide range of loads, it is important to understand the
percentage of time that the system will be required to run at both maximum and minimum load points.
Generally there will be more load diversification in residential applications (shifting from low load to high
load). Commercial applications tend to be more steady during normal daytime hours, and go to low load
levels after hours. The tables below are guidelines for selecting the proper size.
Model No: MULTI18HP230V1A
18,000 BtuH
Cooling Capacity (BtuH)
rated system
capacity
(BtuH)
capacity RATING
(MIN – MAX)
(BtuH)
indoor
unit a
(BtuH)
9K
9,000
5,118~11,940
9,000
12K
12,000
6,824~15,000
12,000
9K+9K
18,000
7,000~21,000
9,000
9,000
9K+12K
21,000
7,100~22,000
9,000
12,000
12K+12K
24,000
7,200~22,000
12,000
12,000
rated system
capacity
(BtuH)
capacity RATING
(MIN – MAX)
(BtuH)
indoor
unit a
(BtuH)
indoor
unit B
(BtuH)
9K
9,500
5,460~15,360
9,500
12K
13,000
6,150~16,400
13,000
9K+9K
19,000
8,530~22,600
9,500
9,500
9K+12K
22,500
8,530~22,600
9,500
13,000
12K+12K
26,000
8,530~22,600
13,000
13,000
Indoor Units
Combinations
indoor
unit B
(BtuH)
Heating Capacity (BtuH)
Indoor Units
Combinations
Note:
It is critical to size the outdoor unit for the entire building load and each indoor unit for its individual zone load.
Capacity data is based on the following conditions:
Cooling Nominal Test Conditions
Indoor: 80°F DB/67°F WB
Outdoor: 95°F DB/75°F WB
Heating Normal Test Conditions
Indoor: 70°F DB/60°F WB
Outdoor: 47°F DB/43°F W
20
INDOOR UNIT COMBINATIONS
Model No: MULTI24HP230V1A
24,000 BtuH
Cooling Capacity (BtuH)
Indoor Units
Combinations
rated system
capacity
(BtuH)
capacity RATING
(MIN – MAX)
(BtuH)
indoor
unit a
(BtuH)
indoor
unit B
(BtuH)
indoor
unit C
(BtuH)
9K+9K
18,000
6,824~26,600
9,000
9,000
9K+12K
21,000
7,165~27,300
9,000
12,000
12K+12K
24,000
7,200~30,000
12,000
12,000
9K+18K
25,000
7,300~32,000
8,400
16,600
12K+18K
25,000
7,400~32,500
10,000
15,000
18K+18K
25,500
7,500~32,500
12,750
12,750
9K+9K+9K
26,000
7,500~34,000
8,667
8,667
8,667
9K+9K+12K
26,000
7,500~34,000
8,000
8,000
10,000
9K+12K+12K
26,000
7,500~34,000
6,000
10,000
10,000
9K+9K+18K
26,000
7,500~34,000
7,000
7,000
12,000
12K+12K+12K
26,000
7,500~34,000
8,667
8,667
8,667
indoor
unit C
(BtuH)
Heating Capacity (BtuH)
Indoor Units
Combinations
rated system
capacity
(BtuH)
capacity RATING
(MIN – MAX)
(BtuH)
indoor
unit a
(BtuH)
indoor
unit B
(BtuH)
9K+9K
19,000
71,00~33,000
9,500
9,500
9K+12K
22,500
7,100~33,500
9,500
13,000
12K+12K
26,000
7,200~34,000
13,000
13,000
9K+18K
27,000
7,300~34,000
9,000
18,000
12K+18K
28,000
7,400~34,000
11,200
16,800
18K+18K
28,500
7,400~34,400
14,250
14,250
9K+9K+9K
29,000
7,500~35,000
9,667
9,667
9,667
9K+9K+12K
29,000
7,600~35,000
9,000
9,000
11,000
9K+12K+12K
29,000
7,600~35,000
6,000
11,500
11,500
9K+9K+18K
29,000
7,600~35,000
6,000
6,000
17,000
12K+12K+12K
29,000
7,600~35,000
9,667
9,667
9,667
Note:
It is critical to size the outdoor unit for the entire building load and each indoor unit for its individual zone load.
Capacity data is based on the following conditions:
Cooling Nominal Test Conditions
Indoor: 80°F DB/67°F WB
Outdoor: 95°F DB/75°F WB
Heating Normal Test Conditions
Indoor: 70°F DB/60°F WB
Outdoor: 47°F DB/43°F W
21
+Multi Outdoor Units
INDOOR UNIT COMBINATIONS
Model No: MULTI30HP230V1A
30,000 BtuH
Cooling Capacity (BtuH)
Indoor Units
Combinations
rated
system
capacity
(BtuH)
capacity
RATING
(MIN – MAX)
(BtuH)
9K+9K
18,000
6,824~26,600
9,000
9,000
9K+12K
21,000
7,165~27,300
9,000
12,000
12K+12K
24,000
7,200~30,000
12,000
12,000
9K+18K
25,000
7,300~32,000
8,400
16,600
12K+18K
25,500
7,400~32,500
10,000
15,000
18K+18K
26,000
7,500~32,500
12,750
12,750
9K+9K+9K
26,000
7,500~34,000
8,667
8,667
8,667
9K+9K+12K
26,000
7,500~34,000
8,000
8,000
10,000
9K+12K+12K
26,000
7,500~34,000
6,000
10,000
10,000
9K+9K+18K
26,000
7,500~34,000
7,000
7,000
12,000
12K+12K+12K
26,000
7,500~34,000
8,667
8,667
8,667
9K+12K+18K
27,000
7,500~34,000
6,800
7,200
13,000
12K+12K+18K
28,000
7,500~34,000
6,500
6,500
15,000
9K+9K+9K+9K
29,000
7,500~34,000
7,250
7,250
7,250
7,250
9K+9K+9K+12K
29,000
7,500~34,000
7,000
7,000
7,000
8,000
9K+9K+12K+12K
29,000
7,500~34,000
6,800
6,800
7,700
7,700
indoor
unit B
(BtuH)
indoor
unit C
(BtuH)
indoor
unit D
(BtuH)
indoor
unit a
(BtuH)
indoor
unit B
(BtuH)
indoor
unit C
(BtuH)
indoor
unit D
(BtuH)
Heating Capacity (BtuH)
Indoor Units
Combinations
rated
system
capacity
(BtuH)
capacity
RATING
(MIN – MAX)
(BtuH)
indoor
unit a
(BtuH)
9K+9K
19,000
7,100~33,000
9,500
9,500
9K+12K
22,500
7,100~33,500
9,500
13,000
12K+12K
26,000
7,200~34,000
13,000
13,000
9K+18K
27,000
7,300~34,000
9,000
18,000
12K+18K
28,000
7,400~34,000
11,200
16,800
18K+18K
28,500
7,400~34,400
14,250
14,250
9K+9K+9K
29,000
7,500~35,000
9,667
9,667
9,667
9K+9K+12K
29,000
7,600~35,000
9,000
9,000
11,000
9K+12K+12K
29,000
7,600~35,000
6,000
11,500
11,500
9K+9K+18K
29,000
7,600~35,000
6,000
6,000
17,000
12K+12K+12K
29,000
7,600~35,000
9,667
9,667
9,667
22
INDOOR UNIT COMBINATIONS
Model No: MULTI30HP230V1A
30,000 BtuH (cont.)
Heating Capacity (BtuH)
Indoor Units
Combinations
rated
system
capacity
(BtuH)
capacity
RATING
(MIN – MAX)
(BtuH)
9K+12K+18K
29,000
7,600~35,000
12K+12K+18K
29,000
9K+9K+9K+9K
indoor
unit B
(BtuH)
indoor
unit C
(BtuH)
6,802
9,309
12,888
7,600~35,000
8,567
8,567
11,862
30,500
7,600~36,000
7,625
7,625
7,625
7,625
9K+9K+9K+12K
30,500
7,600~36,000
7,100
7,100
7,100
9,200
9K+9K+12K+12K
31,000
7,600~36,000
6,500
6,500
9,000
9,000
Note:
indoor
unit a
(BtuH)
indoor
unit D
(BtuH)
It is critical to size the outdoor unit for the entire building load and each indoor unit for its individual zone load.
Capacity data is based on the following conditions:
Cooling Nominal Test Conditions
Indoor: 80°F DB/67°F WB
Outdoor: 95°F DB/75°F WB
Heating Normal Test Conditions
Indoor: 70°F DB/60°F WB
Outdoor: 47°F DB/43°F W
Model No: MULTI36HP230V1A
36,000 BtuH
Cooling Capacity (BtuH)
Indoor Units
Combinations
rated
system
capacity
(BtuH)
capacity
RATING
(MIN – MAX)
(BtuH)
9K+9K
17,060
10,236~26,614
8,530
8,530
9K+12K
20,472
10,236~27,297
8,530
12,283
9K+18K
24,226
10,236~31,391
7,506
16,719
9K+24K (2)
27,297
10,236~31,391
6,824
20,472
12K+12K
20,472
10,236~31,391
10,236
10,236
12K+18K
27,297
10,236~32,415
10,577
13,648
12K+24K (2)
27,297
10,236~32,415
10,236
17,060
18K+18K
27,297
10,236~32,415
13,648
13,648
18K+24K (2)
27,297
10,236~32,415
12,283
15,354
24K +24K (2)
27,297
10,236~32,415
13,648
13,648
9K+9K+9K
24,567
10,236~30,709
8,189
8,189
8,189
9K+9K+12K
24,567
10,236~30,709
6,994
7,336
10,236
9K+9K+18K
29,685
10,236~32,756
7,165
7,165
15,354
9K+9K+24K (2)
29,685
10,236~32,756
6,312
6,312
17,060
9K+12K+12K
29,685
10,236~32,756
7,506
11,089
11,089
9K+12K+18K
29,685
10,236~32,756
6,141
10,065
13,477
9K+12K+24K (2)
29,685
10,236~32,756
5,459
8,018
16,207
9K+18K+18K
29,685
10,236~32,756
5,971
11,771
11,771
9K+18K+24K (2)
29,685
10,236~32,756
5,459
9,042
15,184
23
indoor
unit a
(BtuH)
indoor
unit B
(BtuH)
indoor
unit C
(BtuH)
indoor
unit D
(BtuH)
+Multi Outdoor Units
INDOOR UNIT COMBINATIONS
Model No: MULTI36HP230V1A
36,000 BtuH (cont.)
Cooling Capacity (BtuH)
Indoor Units
Combinations
rated
system
capacity
(BtuH)
capacity
RATING
(MIN – MAX)
(BtuH)
12K+12K+12K
29,685
10,236~32,756
12K+12K+18K
29,685
12K+12K+24K (2)
29,685
indoor
unit a
(BtuH)
indoor
unit B
(BtuH)
indoor
unit C
(BtuH)
9,895
9,895
9,895
10,236~32,756
8,530
8,530
12,624
10,236~32,756
7,506
7,506
14,672
indoor
unit D
(BtuH)
12K+18K+18K
29,685
10,236~32,756
9,212
12,283
12,283
18K+18K+18K
29,685
10,236~32,756
9,895
9,895
9,895
9K+9K+9K+9K
33,438
10,236~34,121
8,359
8,359
8,359
8,359
9K+9K+9K+12K
33,438
10,236~34,121
7,506
7,506
7,506
10,918
9K+9K+9K+18K
33,438
10,236~34,121
6,824
6,824
6,824
12,283
33,438
10,236~34,121
6,141
6,141
6,141
15,013
9K+9K+12K+12K
33,438
10,236~34,121
6,824
6,824
9,895
9,895
9K+9K+12K+18K
33,438
10,236~34,121
6,312
6,312
8,871
12,283
9K+9K+9K+24K (2)
9K+9K+18K+18K
33,438
10,236~34,121
5,459
5,459
11,260
11,260
9K+12K+12K+12K
33,438
10,236~34,121
7,847
8,530
8,530
8,530
9K+12K+12K+18K
33,438
10,236~34,121
6,141
7,506
7,506
12,283
12K+12K+12K+12K
33,438
10,236~34,121
8,359
8,359
8,359
8,359
indoor
unit B
(BtuH)
indoor
unit C
(BtuH)
indoor
unit D
(BtuH)
Heating Capacity (BtuH)
Indoor Units
Combinations
rated
system
capacity
(BtuH)
capacity
RATING
(MIN – MAX)
(BtuH)
indoor
unit a
(BtuH)
9K+9K
22,178
15,354~29,003
11,089
11,089
9K+12K
26,614
15,354~32,756
11,089
15,968
9K+18K
31,494
15,354~33,780
9,758
21,735
9K+24K (2)
32,756
15,354~33,780
8,189
24,567
12K+12K
26,614
15,354~33,780
13,307
13,307
12K+18K
32,756
15,354~33,780
12,693
16,378
12K+24K (2)
32,756
15,354~33,780
12,283
20,472
18K+18K
32,756
15,354~33,780
16,378
16,378
18K+24K (2)
32,756
15,354~33,780
14,740
18,425
24K +24K (2)
32,756
15,354~33,780
16,378
16,378
9K+9K+9K
27,024
15,354~33,780
9,008
9,008
24
9,008
INDOOR UNIT COMBINATIONS
Model No: MULTI36HP230V1A
36,000 BtuH (cont.)
Heating Capacity (BtuH)
Indoor Units
Combinations
rated
system
capacity
(BtuH)
capacity
RATING
(MIN – MAX)
(BtuH)
9K+9K+12K
27,024
15,354~33,780
9K+9K+18K
35,622
9K+9K+24K (2)
indoor
unit a
(BtuH)
indoor
unit B
(BtuH)
indoor
unit C
(BtuH)
7,694
8,069
11,260
15,354~37,533
8,598
8,598
18,425
35,622
15,354~37,533
7,574
7,574
20,472
9K+12K+12K
35,622
15,354~37,533
9,008
13,307
13,307
9K+12K+18K
35,622
15,354~37,533
7,370
12,078
16,173
9K+12K+24K (2)
35,622
15,354~37,533
6,551
9,622
19,449
indoor
unit D
(BtuH)
9K+18K+18K
35,622
15,354~37,533
7,165
14,126
14,126
9K+18K+24K (2)
35,622
15,354~37,533
6,551
10,850
18,220
12K+12K+12K
35,622
15,354~37,533
11,874
11,874
11,874
12K+12K+18K
35,622
15,354~37,533
10,236
10,236
15,149
12K+12K+24K (2)
35,622
15,354~37,533
9,008
9,008
17,606
12K+18K+18K
35,622
15,354~37,533
11,055
14,740
14,740
18K+18K+18K
35,622
15,354~37,533
11,874
11,874
11,874
9K+9K+9K+9K
40,126
15,354~40,945
10,031
10,031
10,031
9K+9K+9K+12K
40,126
15,354~40,945
9,008
9,008
9,008
13,102
9K+9K+9K+18K
40,126
15,354~40,945
8,189
8,189
8,189
14,740
40,126
15,354~40,945
7,370
7,370
7,370
18,016
9K+9K+12K+12K
40,126
15,354~40,945
8,189
8,189
11,874
11,874
9K+9K+12K+18K
40,126
15,354~40,945
7,574
7,574
10,645
14,740
9K+9K+18K+18K
40,126
15,354~40,945
6,551
6,551
13,512
13,512
9K+12K+12K+12K
40,126
15,354~40,945
9,417
10,236
10,236
10,236
9K+12K+12K+18K
40,126
15,354~40,945
7,370
9,008
9,008
14,740
12K+12K+12K+12K
40,126
15,354~40,945
10,031
10,031
10,031
10,031
9K+9K+9K+24K (2)
Notes:
10,031
1) It is critical to size the outdoor unit for the entire building load and each indoor unit for its individual zone load.
2) 24K size is reserved for Ceiling Cassettes, Concealed Ducts, and Floor/Ceilings units only. Not Wall Mount units.
Capacity data is based on the following conditions:
Cooling Nominal Test Conditions:
Indoor: 80°F DB/67°F WB
Outdoor: 95°F DB/75°F WB
Heating Normal Test Conditions
Indoor: 70°F DB/60°F WB
Outdoor: 47°F DB/43°F W
25
+Multi Outdoor Units
INDOOR UNIT COMBINATIONS
Model No: MULTI42HP230V1A
42,000 BtuH
Cooling Capacity (BtuH)
Indoor Units
Combinations
rated
system
capacity
(BtuH)
capacity
RATING
(MIN – MAX)
(BtuH)
indoor
unit a
(BtuH)
indoor
unit B
(BtuH)
indoor
unit C
(BtuH)
indoor
unit D
(BtuH)
9K+9K
9K+12K
9K+18K
9K+24K (2)
12K+12K
12K+18K
12K+24K (2)
18K+18K
18K+24K (2)
24K +24K (2)
9K+9K+9K
9K+9K+12K
9K+9K+18K
9K+9K+24K (2)
9K+12K+12K
9K+12K+18K
9K+12K+24K (2)
9K+18K+18K
9K+18K+24K (2)
9K+24K+24K (2)
12K+12K+12K
12K+12K+18K
12K+12K+24K (2)
12K+18K+18K
12K+18K+24K (2)
12K+24K+24K (2)
18K+18K+18K
18K+18K+24K (2)
9K+9K+9K+9K
9K+9K+9K+12K
9K+9K+9K+18K
9K+9K+9K+24K (2)
9K+9K+12K+12K
9K+9K+12K+18K
9K+9K+12K+24K (2)
9K+9K+18K+18K
9K+9K+18K+24K (2)
9K+12K+12K+12K
9K+12K+12K+18K
9K+12K+12K+24K (2)
9K+12K+18K+18K
20,472
20,472
24,226
27,297
20,472
27,297
32,415
32,415
32,415
32,415
24,567
24,567
32,415
35,486
29,685
35,486
39,580
39,580
39,580
39,580
35,486
35,486
39,580
39,580
39,580
39,580
39,580
39,580
35,486
35,486
39,580
39,580
35,486
39,580
39,580
39,580
39,580
39,580
39,580
39,580
39,580
11,942~30,709
11,942~30,709
11,942~30,709
11,942~30,709
11,942~27,297
11,942~30,709
11,942~37,533
11,942~37,533
11,942~37,533
11,942~37,533
11,942~30,709
11,942~30,709
11,942~37,533
11,942~41,628
11,942~32,756
11,942~41,628
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~41,628
11,942~41,628
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~41,628
11,942~41,628
11,942~46,405
11,942~46,405
11,942~41,628
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
8,530
8,530
7,506
6,824
10,236
10,577
10,236
16,207
13,989
16,207
8,189
6,994
8,018
8,189
8,530
8,530
7,847
7,165
6,824
5,800
11,771
10,918
10,065
9,553
9,042
8,530
13,136
12,283
8,871
8,189
7,847
6,824
7,165
6,824
6,312
6,483
6,141
7,847
7,165
6,483
6,483
8,530
11,942
16,719
20,472
10,236
16,719
22,178
16,207
18,766
16,207
8,189
7,336
8,018
8,189
10,577
10,918
9,553
15,013
13,648
16,890
11,771
10,918
10,065
15,013
14,160
15,525
13,136
12,283
8,871
8,189
7,847
6,824
7,165
6,824
6,312
6,483
6,141
10,577
8,700
7,933
8,189
8,189
10,236
16,378
19,107
10,577
16,037
22,178
15,013
19,107
16,890
11,942
13,648
19,449
15,013
16,378
15,525
13,307
15,013
8,871
8,189
7,847
6,824
10,577
10,577
9,553
13,307
10,407
10,577
8,700
7,933
12,454
8,871
10,918
16,037
19,107
10,577
15,354
17,572
13,307
16,890
10,577
15,013
17,231
12,454
26
indoor
unit E
(BtuH)
INDOOR UNIT COMBINATIONS
Model No: MULTI42HP230V1A
42,000 BtuH (cont.)
Cooling Capacity (BtuH)
Indoor Units
Combinations
9K+18K+18K+18K
12K+12K+12K+12K
12K+12K+12K+18K
12K+12K+12K+24K (2)
12K+12K+18K+18K
9K+9K+9K+9K+9K
9K+9K+9K+9K+12K
9K+9K+9K+9K+18K
9K+9K+9K+9K+24K (2)
9K+9K+9K+12K+12K
9K+9K+9K+12K+18K
9K+9K+9K+18K+18K
9K+9K+12K+12K+12K
9K+9K+12K+12K+18K
9K+12K+12K+12K+12K
9K+12K+12K+12K+18K
12K+12K+12K+12K+12K
rated
system
capacity
(BtuH)
capacity
RATING
(MIN – MAX)
(BtuH)
indoor
unit a
(BtuH)
39,580
39,580
39,580
39,580
39,580
39,580
39,580
39,580
39,580
39,580
39,580
39,580
39,580
39,580
39,580
39,580
39,580
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
11,942~46,405
5,800
9,895
8,359
7,506
7,847
7,916
7,421
6,824
6,483
7,165
6,483
6,483
6,483
5,971
6,483
6,141
7,916
indoor indoor
unit B
unit C
(BtuH)
(BtuH)
11,260
9,895
8,359
7,506
7,847
7,916
7,421
6,824
6,483
7,165
6,483
6,483
6,483
5,971
8,274
7,592
7,916
11,260
9,895
8,359
7,506
11,942
7,916
7,421
6,824
6,483
7,165
6,483
6,483
8,871
8,018
8,274
7,592
7,916
indoor
unit D
(BtuH)
11,260
9,895
14,501
17,060
11,942
7,916
7,421
6,824
6,483
9,042
8,274
10,065
8,871
8,018
8,274
7,592
7,916
indoor
unit E
(BtuH)
7,916
9,895
12,283
13,648
9,042
11,857
10,065
8,871
11,601
8,274
10,662
7,916
Heating Capacity (BtuH)
Indoor Units
Combinations
rated
system
capacity
(BtuH)
capacity
RATING
(MIN – MAX)
(BtuH)
indoor
unit a
(BtuH)
9K+9K
9K+12K
9K+18K
9K+24K (2)
12K+12K
12K+18K
12K+24K (2)
18K+18K
18K+24K (2)
24K+24K (2)
9K+9K+9K
9K+9K+12K
9K+9K+18K
9K+9K+24K (2)
9K+12K+12K
9K+12K+18K
9K+12K+24K (2)
9K+18K+18K
9K+18K+24K (2)
9K+24K+24K (2)
12K+12K+12K
25,591
25,591
30,282
34,121
25,591
34,121
40,519
40,519
40,519
40,519
30,709
30,709
40,519
44,357
37,107
44,357
45,040
45,040
45,040
45,040
44,357
15,354~33,780
15,354~33,780
15,354~33,780
15,354~33,533
15,354~30,026
15,354~37,533
15,354~42,651
15,354~42,651
15,354~42,651
15,354~42,651
15,354~40,945
15,354~40,945
15,354~42,651
15,354~45,040
15,354~40,945
15,354~45,040
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~45,040
10,662
10,662
9,383
8,530
12,795
13,222
12,795
20,261
17,487
20,261
10,236
8,745
10,024
10,236
10,662
10,662
8,929
8,155
7,766
6,599
14,716
27
indoor indoor
unit B
unit C
(BtuH)
(BtuH)
14,928
14,928
20,899
25,591
12,795
20,899
27,723
20,261
23,458
20,261
10,236
9,171
10,024
10,236
13,222
13,648
10,871
17,084
15,532
19,220
14,716
10,236
12,795
20,472
23,884
13,222
20,046
25,239
17,084
21,742
19,220
14,928
indoor
unit D
(BtuH)
indoor
unit E
(BtuH)
+Multi Outdoor Units
INDOOR UNIT COMBINATIONS
Model No: MULTI42HP230V1A
42,000 BtuH (cont.)
Heating Capacity (BtuH)
Indoor Units
Combinations
12K+12K+18K
12K+12K+24K (2)
12K+18K+18K
12K+18K+24K (2)
12K+24K+24K (2)
18K+18K+18K
18K+18K+24K (2)
9K+9K+9K+9K
9K+9K+9K+12K
9K+9K+9K+18K
9K+9K+9K+24K (2)
9K+9K+12K+12K
9K+9K+12K+18K
9K+9K+12K+24K (2)
9K+9K+18K+18K
9K+9K+18K+24K (2)
9K+12K+12K+12K
9K+12K+12K+18K
9K+12K+12K+24K (2)
9K+12K+18K+18K
9K+18K+18K+18K
12K+12K+12K+12K
12K+12K+12K+18K
12K+12K+12K+24K (2)
12K+12K+18K+18K
9K+9K+9K+9K+9K
9K+9K+9K+9K+12K
9K+9K+9K+9K+18K
9K+9K+9K+9K+24K (2)
9K+9K+9K+12K+12K
9K+9K+9K+12K+18K
9K+9K+9K+18K+18K
9K+9K+12K+12K+12K
9K+9K+12K+12K+18K
9K+12K+12K+12K+12K
9K+12K+12K+12K+18K
12K+12K+12K+12K+12K
Notes:
rated
system
capacity
(BtuH)
44,357
45,040
45,040
45,040
45,040
45,040
45,040
44,357
44,357
45,040
45,040
44,357
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
45,040
capacity
RATING
(MIN – MAX)
(BtuH)
15,354~45,040
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
15,354~47,769
indoor
unit a
(BtuH)
13,648
11,454
10,871
10,291
9,707
14,948
13,979
11,089
10,236
8,929
7,766
8,956
7,766
7,182
7,377
6,988
8,929
8,155
7,377
7,377
6,599
11,260
9,513
8,540
8,929
9,008
8,445
7,766
7,377
8,155
7,377
7,377
7,377
6,793
7,377
6,988
9,008
indoor
unit B
(BtuH)
13,648
11,454
17,084
16,112
17,668
14,948
13,979
11,089
10,236
8,929
7,766
8,956
7,766
7,182
7,377
6,988
12,038
9,902
9,028
9,318
12,812
11,260
9,513
8,540
8,929
9,008
8,445
7,766
7,377
8,155
7,377
7,377
7,377
6,793
9,414
8,639
9,008
indoor
unit C
(BtuH)
indoor
unit D
(BtuH)
indoor
unit E
(BtuH)
17,060
22,131
17,084
18,637
17,668
15,143
17,084
11,089
10,236
8,929
7,766
13,222
12,038
10,871
15,143
11,843
12,038
9,902
9,028
14,170
12,812
11,260
9,513
8,540
13,590
9,008
8,445
7,766
7,377
8,155
7,377
7,377
10,096
9,124
9,414
8,639
9,008
11,089
13,648
18,248
21,742
13,222
17,473
19,995
15,143
19,220
12,038
17,084
19,609
14,170
12,812
11,260
16,501
19,415
13,590
9,008
8,445
7,766
7,377
10,291
9,414
11,454
10,096
9,124
9,414
8,639
9,008
9,008
11,260
13,979
15,532
10,291
13,491
11,454
10,096
13,201
9,414
12,133
9,008
1) It is critical to size the outdoor unit for the entire building load and each indoor unit for its individual zone load.
2) 24K size is reserved for Ceiling Cassettes, Concealed Ducts, and Floor/Ceilings units only. Not Wall Mount units.
Capacity data is based on the following conditions:
Cooling Nominal Test Conditions:
Indoor: 80°F DB/67°F WB
Outdoor: 95°F DB/75°F WB
Heating Normal Test Conditions
Indoor: 70°F DB/60°F WB
Outdoor: 47°F DB/43°F W
28
EXTENDED PERFORMANCE RATINGS
Model No: MULT18HP230V1A
18,000 BtuH
Cooling Performance
OUTDOOR AMBIENT
TEMPERATURE (DB)
INDOOR ENTERING AIR TEMPERATURES (DB) 50% RH
TC
62°F
SHC
TC
67°F
67 F
SHC
TC
72°F
72 F
SHC
25°F
22,145
16,443
23,936
17,330
25,587
18,422
35°F
21,641
16,423
23,047
16,825
24,167
17,473
45°F
20,572
15,799
22,000
16,324
23,571
17,089
55°F
19,805
15,329
2 1 ,1 1 9
15,839
22,640
16,528
65°F
19,130
14,864
21,049
15,977
22,320
16,316
75°F
18,378
14,371
19,800
15,226
21,296
15,716
85°F
17,640
14,006
18,900
14,591
20,520
15,329
95°F
16,740
13,375
18,000
14,382
19,692
14,789
105°F
15,840
12,862
17,060
13,614
18,540
14,239
115°F
14,939
12,309
15,839
12,829
16,919
13,248
Heating Performance
INDOOR ENTERING AIR TEMPERATURES (DB)
OUTDOOR AMBIENT
TEMPERATURE (DB)
(80% RH)
TC
5°F
65°F
SHC
TC
15,608
15,608
15°F
16,684
25°F
70°F
75°F
SHC
TC
14,731
14,731
14,370
14,370
16,684
15,221
15,221
15,130
15,130
17,702
17,702
16,802
16,802
15,846
15,846
35°F
18,691
18,691
17,300
17,300
16,574
16,574
45°F
19,667
19,667
19,000
19,000
17,849
17,849
55°F
19,693
19,693
19,124
19,124
18,287
18,287
65°F
19,600
19,600
19,314
19,314
18,719
18,719
TC- Total Capacity
(BtuH) SHC- Sensible Capacity (BtuH)
Capacity data is based on the following conditions:
Cooling Nominal Test Conditions
Indoor: 80°F DB/67°F WB
Outdoor: 95°F DB/75°F WB
Heating Normal Test Conditions
Indoor: 70°F DB/60°F WB
Outdoor: 47°F DB/43°F W
29
SHC
+Multi Outdoor Units
EXTENDED PERFORMANCE RATINGS
Model No: MULT24HP230V1A
24,000 BtuH
Cooling Performance
OUTDOOR AMBIENT
TEMPERATURE (DB)
INDOOR ENTERING AIR TEMPERATURES (DB) 50% RH
TC
62°F
SHC
TC
67°F
SHC
TC
72°F
SHC
25°F
31,988
23,751
34,575
25,032
36,959
26,610
35°F
31,260
23,723
33,291
24,302
34,907
25,238
45°F
29,716
22,821
31,777
23,579
34,047
24,684
55°F
28,608
22,142
30,506
22,879
32,703
23,873
65°F
27,633
21,471
30,405
23,077
32,240
23,567
75°F
26,546
20,759
28,600
21,994
30,760
22,701
85°F
25,480
20,231
27,300
21,075
29,640
22,141
95°F
24,180
19,320
26,000
20,774
28,444
21,361
105°F
22,880
18,579
24,643
19,665
26,780
20,567
115°F
21,578
17,780
22,878
18,531
24,438
19,135
Heating Performance
INDOOR ENTERING AIR TEMPERATURES (DB)
OUTDOOR AMBIENT
TEMPERATURE (DB)
(80% RH)
TC
5°F
23,823
23,823
22,484
22,484
21,933
21,933
15°F
25,465
25,465
23,232
23,232
23,092
23,092
25°F
27,019
27,019
25,645
25,645
24,186
24,186
35°F
28,528
28,528
26,405
26,405
25,297
25,297
45°F
30,018
30,018
29,000
29,000
27,243
27,243
55°F
30,058
30,058
29,189
29,189
27,912
27,912
65°F
29,916
29,916
29,479
29,479
28,571
28,571
TC- Total Capacity
65°F
SHC
TC
70°F
SHC
(BtuH) SHC- Sensible Capacity (BtuH)
Capacity data is based on the following conditions:
Cooling Nominal Test Conditions
Indoor: 80°F DB/67°F WB
Outdoor: 95°F DB/75°F WB
Heating Normal Test Conditions
Indoor: 70°F DB/60°F WB
Outdoor: 47°F DB/43°F W
30
TC
75°F
SHC
EXTENDED PERFORMANCE RATINGS
Model No: MULTI30HP230V1A
30,000 BtuH
Cooling Performance
OUTDOOR AMBIENT
TEMPERATURE (DB)
INDOOR ENTERING AIR TEMPERATURES (DB) 50% RH
TC
62°F
SHC
TC
67°F
SHC
TC
72°F
SHC
25°F
35,679
26,492
38,564
27,920
41,224
29,681
35°F
34,867
26,460
37,132
27,106
38,935
28,150
45°F
33,144
25,454
35,444
26,300
37,976
27,532
55°F
31,909
24,697
34,026
25,519
36,476
26,628
65°F
30,821
23,948
33,913
25,740
35,960
26,287
75°F
29,609
23,154
31,900
24,531
34,310
25,320
85°F
28,420
22,565
30,450
23,507
33,060
24,696
95°F
26,970
21,549
29,000
23,171
31,726
23,826
105°F
25,520
20,722
27,486
21,934
29,870
22,940
115°F
24,068
19,832
25,518
20,669
27,258
21,343
Heating Performance
INDOOR ENTERING AIR TEMPERATURES (DB)
OUTDOOR AMBIENT
TEMPERATURE (DB)
(80% RH)
TC
5°F
65°F
SHC
TC
24,974
24,974
15°F
26,694
25°F
70°F
75°F
SHC
TC
23,570
23,570
22,992
22,992
26,694
24,354
24,354
24,207
24,207
28,324
28,324
26,883
26,883
25,353
25,353
35°F
29,905
29,905
27,679
27,679
26,518
26,518
45°F
31,467
31,467
30,400
30,400
28,558
28,558
55°F
31,509
31,509
30,598
30,598
29,260
29,260
65°F
31,360
31,360
30,902
30,902
29,950
29,950
TC- Total Capacity
(BtuH) SHC- Sensible Capacity (BtuH)
Capacity data is based on the following conditions:
Cooling Nominal Test Conditions
Indoor: 80°F DB/67°F WB
Outdoor: 95°F DB/75°F WB
Heating Normal Test Conditions
Indoor: 70°F DB/60°F WB
Outdoor: 47°F DB/43°F W
31
SHC
+Multi Outdoor Units
EXTENDED PERFORMANCE RATINGS
Model No: MULTI36HP230V1A
36,000 BtuH
Cooling Performance
OUTDOOR AMBIENT
TEMPERATURE (DB)
INDOOR ENTERING AIR TEMPERATURES (DB) 50% RH
TC
62°F
SHC
TC
67°F
SHC
TC
72°F
SHC
25°F
41,830
31,059
45,213
32,734
48,331
34,798
35°F
40,878
31,022
43,534
31,780
45,648
33,004
45°F
38,859
29,843
41,555
30,834
44,523
32,279
55°F
37,410
28,955
39,892
29,919
42,765
31,219
65°F
36,135
28,077
39,760
30,178
42,160
30,819
75°F
34,714
27,146
37,400
28,761
40,225
29,686
85°F
33,320
26,456
35,700
27,560
38,760
28,954
95°F
31,620
25,264
34,000
27,166
37,196
27,934
105°F
29,920
24,295
32,225
25,716
35,020
26,895
115°F
28,220
23,253
29,920
24,235
31,960
25,025
Heating Performance
INDOOR ENTERING AIR TEMPERATURES (DB)
OUTDOOR AMBIENT
TEMPERATURE (DB)
(80% RH)
TC
5°F
65°F
SHC
TC
26,628
26,628
15°F
28,463
25°F
70°F
75°F
SHC
TC
25,131
25,131
24,515
24,515
28,463
25,967
25,967
25,811
25,811
30,200
30,200
28,664
28,664
27,033
27,033
35°F
31,886
31,886
29,513
29,513
28,275
28,275
45°F
33,552
33,552
32,414
32,414
30,450
30,450
55°F
33,597
33,597
32,414
32,414
31,198
31,198
65°F
33,438
33,438
32,949
32,949
31,934
31,934
TC- Total Capacity
(BtuH) SHC- Sensible Capacity (BtuH)
Capacity data is based on the following conditions:
Cooling Nominal Test Conditions
Indoor: 80°F DB/67°F WB
Outdoor: 95°F DB/75°F WB
Heating Normal Test Conditions
Indoor: 70°F DB/60°F WB
Outdoor: 47°F DB/43°F W
32
SHC
EXTENDED PERFORMANCE RATINGS
Model No: MULTI42HP230V1A
42,000 BtuH
Cooling Performance
OUTDOOR AMBIENT
TEMPERATURE (DB)
INDOOR ENTERING AIR TEMPERATURES (DB) 50% RH
TC
62°F
SHC
TC
67°F
SHC
TC
72°F
SHC
25°F
49,212
36,540
53,192
38,511
56,860
40,939
35°F
48,092
36,497
51,216
37,388
53,704
38,828
45°F
45,716
35,110
48,888
36,275
52,380
37,976
55°F
44,012
34,065
46,932
35,199
50,312
36,728
65°F
42,512
33,032
46,776
35,503
49,600
36,258
75°F
40,840
31,937
44,000
33,836
47,324
34,925
85°F
39,200
31,125
42,000
32,424
45,600
34,063
95°F
37,200
29,723
40,000
31,960
43,760
32,864
105°F
35,200
28,582
37,912
30,254
41,200
31,642
115°F
33,200
27,357
35,200
28,512
37,600
29,441
Heating Performance
INDOOR ENTERING AIR TEMPERATURES (DB)
OUTDOOR AMBIENT
TEMPERATURE (DB)
(80% RH)
TC
5°F
65°F
SHC
TC
34,729
34,729
15°F
37,122
25°F
70°F
75°F
SHC
TC
32,776
32,776
31,973
31,973
37,122
33,867
33,867
33,664
33,664
39,388
39,388
37,384
37,384
35,257
35,257
35°F
41,586
41,586
38,491
38,491
36,876
36,876
45°F
43,759
43,759
42,275
42,275
39,713
39,713
55°F
43,818
43,818
42,275
42,275
40,690
40,690
65°F
43,611
43,611
42,973
42,973
41,649
41,649
TC- Total Capacity
(BtuH) SHC- Sensible Capacity (BtuH)
Capacity data is based on the following conditions:
Cooling Nominal Test Conditions
Indoor: 80°F DB/67°F WB
Outdoor: 95°F DB/75°F WB
Heating Normal Test Conditions
Indoor: 70°F DB/60°F WB
Outdoor: 47°F DB/43°F W
33
SHC
MULTI Wall mount units
Models:
NEO09HP230V1AH
NEO12HP230V1AH
NEO18HP230V1AH
+Multi Wall Mount Units
Table of Contents
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . 36-37
Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Clearance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 38
Product Performance Data . . . . . . . . . . . . . . . . . . . . 39-40
Dimensional Specifications . . . . . . . . . . . . . . . . . . . . . . . 41
+Multi Wall Mount Units
When it comes to fighting the heat, you need the NEO +Multi Wall Mount at your side. Don’t be
fooled by its compact design. Our +Multi Wall Mount is energy efficient, yet powerful for year round
comfort. Gree’s whisper quiet fan technology silences distracting noise. Its attractive compact design
mounts in a small wall space near the ceiling, and fits seamlessly into any decor. The fully featured
+Multi Wall Mount can be operated by an infrared remote controller or tether controller, allowing you
to easily manage a variety of useful features to further enhance room comfort.
FEATURES AND BENEFITS
Whisper Quiet
Gree systems are both energy efficient and quiet. Wall mounted units operate with sound levels
starting as low as 32 dB(A).
Subtle Appearance
Designed for a comfortable fit in virtually any living space. This slim compact cabinet sits
inconspicuously on the wall, and blends into most interior designs.
Multi-Speed Fan
The indoor fan can run at up to four different speeds (Low, Medium, High or Turbo) for either
COOLING or HEATING mode for maximum comfort and quiet operation.
Time Guard
Among the system’s many safeties is a Time Guard function to prevent rapid cycling of the compressor.
A protective five-minute time delay restricts compressor restarts after shutoff.
Power Failure Mode
Power interruptions are no problem. User selections and system parameters are stored in non-volatile
memory. These parameters are retained during a power failure. When power is returned, the system
will automatically return to the last operating mode.
Controller
The unit comes with a factory supplied wired Tether Controller or Wireless Remote Controller.
Note: the controllers are mutually exclusive. They cannot be used at the same time.
IR Wireless Remote Controller
The Gree multi-functional infrared hand held wireless controller is sleek, ergonomically designed, easy to use and has a large backlit LCD display.
Tether Controller (Optional)
The Gree tether controller mounts to the wall up to 25 feet from the unit. It provides complete
control over operation mode, desired temperature, fan speed, airflow direction and more.
Mode Button
The units can be set to five different operating modes: HEAT, COOL, DRY, FAN ONLY and AUTO.
Note: AUTO MODE has fixed setpoints of 68° F heating and 78° F cooling, which are not changeable.
The system will automatically select heating or cooling to maintain room temperature within this band.
36
FEATURES AND BENEFITS
Intelligent Pre-Heating
The Multi Zone system guards against the annoying COLD BLOW in heating mode, and constantly
monitors the discharge air temperature. It will delay the indoor fan until the indoor coil has warmed
up to prevent blowing uncomfortable cool air into the room.
Timer Mode
The unit can be programmed to turn ON or OFF after a specific amount time. The time period is
adjustable between one half and 24 hours.
I Feel Mode
The unit will sense room temperature at the remote controller instead of at the indoor unit. It then adjusts
airflow and temperature accordingly for the ultimate in personal comfort control and energy savings.
Swing Louver
The unit has adjustable swing louvers which can be controlled from the wired tether or wireless
controllers. Vertical swing louver allows five different vertical (up & down) air discharge directions
including Continuous Sweep. Maximize comfort by adjusting the direction of airflow in the room by
moving the louvers up or down.
Privacy Lock Mode
Both wired tether and wireless controllers have a Privacy Lock to avert unauthorized access and stop
tampering with system settings.
Sleep Mode
The unit will automatically adjust room temperature during sleep time. This slight change in
temperature will not affect your comfort level due to the natural effects that sleeping has on the
body, but it will save on energy consumption and will lower electric bills.
Fahrenheit °F / Celsius °C
The wired tether and wireless controllers can be set to display in either °F or °C.
Polymeric Air Filters
Two-piece removable polymeric air filters easily slide in and out from the front of the indoor unit and
are interchangeable. The front panel does not need to be removed to access or change the filters.
The filters are washable and permanent.
Self-Diagnosis
With an on-board computer using real-time diagnostics, the Gree Multi Zone system helps to
prolong its own life. The automatic diagnosis feature continuously scans for unacceptable operating
conditions or malfunctions. If such conditions occur, the system takes corrective action or stops.
Fault codes are shown on the unit display to facilitate easy troubleshooting and repair.
Agency Listings
All systems are listed with AHRI (Air conditioning, Heating, and Refrigeration Institute) and are
ETL Certified per UL Standards.
7/5 Year Limited Warranty
Enjoy one of the most comprehensive warranties in the industry. Seven (7) years on compressor
and Five (5) years on all parts.
37
+Multi Wall Mount Units
NOMENCLATURE
NEO
12 HP
230V
1 A
H
Series Designation
NEO - Neo Indoor High Wall
MULTI - Multiple Port Outdoor Unit
DUCT - Slim Duct Indoor Unit
CAS - Ceiling Cassette
FLR - Floor/Ceiling Unit
CONS - Mini Console
Product Type
S - System
O - Outdoor Units
H - Indoor High Wall
D - Indoor Duct
C - Indoor Cassette
F - Indoor Floor/Ceiling
Cooling Capacity
9- 9,000 BtuH
12 - 12,000 BtuH
18 - 18,000 BtuH
Revision Level
Style/Color Designation
Model Type
AC - Cooling Only
HP - Heat Pump
HC - Heat/Cool
Electrical Rating
230V - 208/230V 60Hz 1PH
115V - 115V 60Hz 1PH
MINIMUM INDOOR CLEARANCE SPECIFICATIONS
The unit installation must meet or exceed the following minimum clearances for proper operation.
Ceiling
6 in
(0.15m)
6 in
6 in
(0.15m)
(0.15m)
6 ft
(1.8m)
Floor
38
PERFORMANCE SPECIFICATIONS & DATA
Indoor High Wall Units
MODEL NUMBER
COOLING CAPACITY
(BtuH)
HEATING CAPACITY
(BtuH)
DEHUMIDIFICATION
(Pts./hr.)
NEO09HP230V1AH
9,000
9,800
2.5
NEO12HP230V1AH
12,000
13,000
3.0
NEO18HP230V1AH
18,000
19,800
3.8
Indoor High Wall Units
MODEL NUMBER
air filter type
air flow
fan type
NEO09HP230V1AH
Polymeric Mesh
4-way
Crossflow
NEO12HP230V1AH
Polymeric Mesh
4-way
Crossflow
NEO18HP230V1AH
Polymeric Mesh
4-way
Crossflow
Indoor High Wall Units
MODEL NUMBER
COOLING (CFM)
LOW FAN
MEDIUM FAN
HIGH FAN
TURBO FAN
NEO09HP230V1AH
218
253
277
306
NEO12HP230V1AH
217
253
277
335
NEO18HP230V1AH
324
383
459
500
Indoor High Wall Units
MODEL NUMBER
HEATING (CFM)
LOW FAN
MEDIUM FAN
HIGH FAN
TURBO FAN
NEO09HP230V1AH
218
253
277
306
NEO12HP230V1AH
217
253
277
335
NEO18HP230V1AH
324
383
459
500
AIR THROW DATA
Indoor High Wall Units
MODEL NUMBER
APPROXIMATE AIR THROW
LOW
MEDIUM
HIGH
TURBO
NEO09HP230V1AH
18 ft.
21 ft.
24 ft.
28 ft.
NEO12HP230V1AH
18 ft.
21 ft.
24 ft.
30 ft.
NEO18HP230V1AH
22 ft.
27 ft.
33 ft.
39 ft.
39
+Multi Wall Mount Units
SOUND DATA
Indoor High Wall Units
MODEL NUMBER
LOW FAN
MEDIUM FAN
HIGH FAN
TURBO FAN
SOUND
POWER
SOUND
PRESSURE
SOUND
POWER
SOUND
PRESSURE
SOUND
POWER
SOUND
PRESSURE
SOUND
POWER
SOUND
PRESSURE
NEO09HP230V1AH
42 dBA
32 dBA
45 dBA
35 dBA
48 dBA
38 dBA
52 dBA
42 dBA
NEO12HP230V1AH
43 dBA
33 dBA
46 dBA
36 dBA
49 dBA
39 dBA
54 dBA
44 dBA
NEO18HP230V1AH
45 dBA
35 dBA
50 dBA
40 dBA
54 dBA
44 dBA
59 dBA
49 dBA
Note:
1. Sound pressure ratings are estimated sound pressure measurements, 3 feet from unit.
2. Sound power ratings are per AHRI 270 and AHRI 350
ELECTRICAL DATA
Indoor High Wall Units
INDOOR FAN
MODEL NUMBER
RATED POWER SUPPLY
(volt-phase-hz)
VOLTAGE RANGE
(volts)
NEO09HP230V1AH
208/230v-1ph-60hz
187-253
0.2
20.0
NEO12HP230V1AH
208/230v-1ph-60hz
187-253
0.2
20.0
NEO18HP230V1AH
208/230v-1ph-60hz
187-253
0.3
20.0
Legend:
RLA (amps) POWER (watts)
RLA – Rated Load Amps
PRODUCT WEIGHT
Indoor High Wall Units
MODEL NUMBER
PRODUCT WEIGHT
NET OPERATING
GROSS SHIPPING
NEO09HP230V1AH
22 lbs.
29 lbs.
NEO12HP230V1AH
22 lbs.
29 lbs.
NEO18HP230V1AH
24 lbs.
31 lbs.
40
DIMENSIONAL SPECIFICATIONS
Model No: NEO09HP230V1AH
9,000 BtuH
Model No: NEO12HP230V1AH 12,000 BtuH
7.1 (180)
10.8
(275)
Suction/Gas Line Port Size
Port 1
3/8-in OD Flared
Liquid Line Port Size
Port 1
1/4-in OD Flared
Drain Connector
Drain Line
Model No: NEO18HP230V1AH
0.625-in OD
18,000 BtuH
7.9 (200)
11.7
(298)
Suction/Gas Line Port Size
Port 1
1/2-in OD Flared
Liquid Line Port Size
Port 1
1/4-in OD Flared
Drain Connector
Drain Line
41
0.625-in OD
MULTI CEILING CASSETTES
Models:
CAS12HP230V1AC
CAS18HP230V1AC
CAS24HP230V1AC
+Multi Ceiling Cassettes
Table of Contents
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . 44-46
Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Product Performance Data . . . . . . . . . . . . . . . . . . . . 47-48
Dimensional Specifications . . . . . . . . . . . . . . . . . . . . 49-50
Clearance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 51
Installation of Mounting Hangers . . . . . . . . . . . . . . . . . . 52
Condensate Drain Designs . . . . . . . . . . . . . . . . . . . . . . . . 53
+Multi Ceiling Cassettes
Gree’s +Multi Ceiling Cassette will inconspicuously provide quiet performance through innovative design. The +Multi Ceiling Cassette
is extremely suitable for any room, and can be easy installed in suspended ceilings with only a discreet decorative discharge grille
visible. Gree’s fan technology quietly and evenly distributes conditioned air throughout the room, and an internal condensate lift pump
reliably disposes condensate water to a safe location. The +Multi Ceiling Cassette is ideal for light commercial applications which
require comfort control in large, open spaces. Each +Multi Ceiling Cassette can be operated by an infrared remote control or wired
tether controller, allowing maximum flexibility for any application.
FEATURES AND BENEFITS
Whisper Quiet
Gree systems are both energy efficient and quiet. Wall mounted units operate with sound levels
starting as low as 35 dB(A).
Subtle Appearance
This flexible ceiling mount unit conveniently disappears above the surface of any room’s hard or
drop ceiling.
Convenient Size (12K and 18K only)
The Gree ceiling cassettes can be easily mounted in a hard ceiling (with an access panel for servicing
or in 2’x2’ drop ceiling. They provide great air distribution, quiet operating and a less obtrusive style.
Multi-Speed Fan
The indoor fan can run at up to three different speeds (Low, Medium, or High) for either COOLING
or HEATING mode for maximum comfort and quiet operation.
4-Way Discharge Air
The Gree ceiling cassette is designed to bring return air in through the center and quietly discharge
the air out along each of the four exterior sides.
Decorative Discharge Air Grille (sold separately)
The cassette Decorative Grille is made of strong resilient polymer. It’s designed to fit attractively in any interior
décor. The Decorative Grille is sold separately and is required to complete installation of the systems.
Built-In Condensate Lift Pump
The unit features a built-in drain pump that lifts condensation up to 11 inches above the drain pan to a
gravity condensate drain system. In most cases, the internal condensate lift mechanism will avoid the
need for an external condensate pump.
Condensate Sentry
The unit’s fail-safe mechanism recognizes when there is a high level in the condensate pan and shuts
off the system to prevent overflow problems.
44
FEATURES AND BENEFITS
Intelligent Pre-Heating
The Multi Zone system guards against the annoying COLD BLOW in heating mode. The system constantly
monitors the discharge air temperature. It will delay the indoor fan until the indoor coil has warmed
up to prevent blowing uncomfortable cool air into the room.
Controller
The unit comes with a factory supplied wired Tether Controller or Wireless Remote Controller.
Note: the controllers are mutually exclusive. They cannot be used at the same time.
IR Wireless Remote Controller
The Gree multi-functional infrared hand held wireless controller is sleek, ergonomically designed, easy to use and has a large backlit LCD display.
Tether Controller (Optional)
The Gree wired tether controller mounts to the wall up to 25 feet from the unit. It provides
complete control over operation mode, desired temperature, fan speed, airflow direction
and more.
Mode Button
The units can be set to five different operating modes: HEAT, COOL, DRY, FAN ONLY and AUTO.
Note: AUTO MODE has fixed setpoints of 68° F heating and 78° F cooling, which are not changeable.
The system will automatically select heating or cooling to maintain room temperature within this band.
Timer Mode
The unit can be programmed to turn ON or OFF after a specific amount time. The time period is
adjustable between one half and 24 hours.
I Feel Mode
The unit will sense room temperature at the remote controller instead of at the indoor unit. It then adjusts
airflow and temperature accordingly for the ultimate in personal comfort control and energy savings.
Swing Louver
The unit has adjustable swing louvers which can be controlled from the wired tether or wireless
controllers. Vertical swing louver allows five different air discharge directions including Continuous
Sweep. Maximize comfort by adjusting the direction of airflow in the room by moving the louvers
up or down.
Privacy Lock Mode
Both wired tether and wireless controllers have a Privacy Lock to avert unauthorized access and stop
tampering with system settings.
Sleep Mode
The unit will automatically adjust room temperature during sleep time. This slight change in
temperature will not affect your comfort level due to the natural effects that sleeping has on the
body, but it will save on energy consumption and will lower electric bills.
Fahrenheit °F / Celsius °C
The wired tether and wireless controllers can be set to display in either °F or °C.
45
+Multi Ceiling Cassettes
FEATURES AND BENEFITS
Power Failure Mode
Power interruptions are no problem. User selections and system parameters are stored in non-volatile
memory. These parameters are retained during a power failure. When power is returned, the system
will automatically return to the last operating mode.
Polymeric Air Filter
One piece removable polymeric air filter easily slides in and out from the ceiling cassette. The filter
is washable and permanent.
Self-Diagnosis
With an on-board computer using real-time diagnostics, the Gree Multi Zone system helps to prolong
its own life. The automatic diagnosis feature continuously scans for unacceptable operating conditions
or malfunctions. If such conditions occur, the system takes corrective action or stops. Fault codes are
shown on the unit display to facilitate easy troubleshooting and repair.
Fresh Air Intake (24K model only)
The 24K size ceiling cassette has a ventilation air knockout that allows a 4 inch flex duct connection and a
field supplied duct booster fan. The maximum fresh air allowed is 10% of unit high speed fan airflow rating.
Agency Listings
All systems are listed with AHRI (Air conditioning, Heating, and Refrigeration Institute) and are
ETL certified per UL Standards.
7/5 Year Limited Warranty
Enjoy one of the most comprehensive warranties in the industry. Seven (7) years on compressor
and Five (5) years on all parts.
NOMENCLATURE
CAS
12 HP
230V
Series Designation
CAS - Ceiling Cassette
MULTI - Multiple Port Outdoor Unit
DUCT - Slim Duct Indoor Unit
NEO - Neo Indoor High Wall
FLR - Floor/Ceiling Unit
CONS - Mini Console
1 A
C
Product Type
S - System
O - Outdoor Units
H - Indoor High Wall
D - Indoor Duct
C - Indoor Cassette
F - Indoor Floor/Ceiling
Cooling Capacity
12 - 12,000 BtuH
18 - 18,000 BtuH
24 - 24,000 BtuH
Revision Level
Style/Color Designation
Model Type
AC - Cooling Only
HP - Heat Pump
HC - Heat/Cool
Electrical Rating
230V - 208/230V 60Hz 1PH
115V - 115V 60Hz 1PH
46
PERFORMANCE SPECIFICATIONS AND DATA
Ceiling Cassette
MODEL NUMBER
COOLING CAPACITY
(BtuH)
HEATING CAPACITY
(BtuH)
dehumidification
(Pts./hr.)
CAS12HP230V1AC
11,946
13,652
3.0
CAS18HP230V1AC
15,359
17,065
3.8
CAS24HP230V1AC
22,867
27,304
4.4
Ceiling Cassette
MODEL NUMBER
AIR FILTER TYPE
AIR FLOW
FAN TYPE
CAS12HP230V1AC
Polymeric Mesh
4-way
Axial
CAS18HP230V1AC
Polymeric Mesh
4-way
Axial
CAS24HP230V1AC
Polymeric Mesh
4-way
Axial
LOW FAN
COOLING (CFM)
MEDIUM FAN
HIGH FAN
CAS12HP230V1AC
251
292
353
CAS18HP230V1AC
251
292
353
CAS24HP230V1AC
465
509
694
Ceiling Cassette
MODEL NUMBER
Ceiling Cassette
LOW FAN
HEATING (CFM)
MEDIUM FAN
CAS12HP230V1AC
251
292
353
CAS18HP230V1AC
251
292
353
CAS24HP230V1AC
465
509
694
MODEL NUMBER
47
HIGH FAN
+Multi Ceiling Cassettes
SOUND DATA
Ceiling Cassette
MODEL NUMBER
LOW FAN
MEDIUM FAN
HIGH FAN
SOUND
POWER
SOUND
PRESSURE
SOUND
POWER
SOUND
PRESSURE
SOUND
POWER
SOUND
PRESSURE
CAS12HP230V1AC
52 dBA
42 dBA
54 dBA
44 dBA
56 dBA
46 dBA
CAS18HP230V1AC
52 dBA
42 dBA
54 dBA
44 dBA
56 dBA
46 dBA
CAS24HP230V1AC
55 dBA
35 dBA
47 dBA
37 dBA
49 dBA
39 dBA
Note:
1. Sound pressure ratings are estimated sound pressure measurements, 3 feet from unit.
2. Sound power ratings are per AHRI 270 and AHRI 350
ELECTRICAL DATA
Ceiling Cassette
INDOOR FAN
RLA (amps) POWER (watts)
MODEL NUMBER
RATED POWER SUPPLY
(volt-phase-hz)
VOLTAGE RANGE
(volts)
CAS12HP230V1AC
208/230v-1ph-60hz
187-253
0.2
11.0
CAS18HP230V1AC
208/230v-1ph-60hz
187-253
0.2
11.0
CAS24HP230V1AC
208/230v-1ph-60hz
187-253
0.4
50.0
Legend:
RLA – Rated Load Amps
PRODUCT WEIGHT
Ceiling Cassette
MODEL NUMBER
PRODUCT WEIGHT
NET OPERATING
GROSS SHIPPING
CAS12HP230V1AC
40 lbs.
51 lbs.
CAS18HP230V1AC
40 lbs.
51 lbs.
CAS24HP230V1AC
62 lbs.
77 lbs.
Decorative Grill
MODEL NUMBER
PRODUCT WEIGHT
NET OPERATING
GROSS SHIPPING
CAS12HP230V1AC
6 lbs.
8 lbs.
CAS18HP230V1AC
6 lbs.
8 lbs.
CAS24HP230V1AC
6.5 lbs.
10 lbs.
48
DIMENSIONAL SPECIFICATIONS
Model No: CAS12HP230V1AC Model No: CAS18HP230V1AC 12,000 BtuH
18,000 BtuH
Suction/Gas Line Port Size
12,000 BtuH
18,000 BtuH
3/8-in OD Flared
1/2-in OD Flared
Liquid Line Port Size
12,000 BtuH
18,000 BtuH
1/4-in OD Flared
1/4-in OD Flared
Drain Line Connection
12,000 BtuH
18,000 BtuH
49
1.2-in OD Flared
1.2-in OD Flared
+Multi Ceiling Cassettes
DIMENSIONAL SPECIFICATIONS
Model No: CAS24HP230V1AC 24,000 BtuH
Suction/Gas Line Port Size
Port 1
5/8-in OD Flared
Liquid Line Port Size
Port 1
3/8-in OD Flared
Drain Connector
Drain Line
50
1.2-in OD
MINIMUM INDOOR CLEARANCE SPECIFICATIONS
The unit installation must meet or exceed the following minimum clearances for proper operation.
Installation stands for main body of the unit.
6.25-in
Ceiling
Above 0.75-in
Drainage hose
Refrigerant pipes
Pipe insulation
Air outlet vent
Air inlet grille
51
+Multi Ceiling Cassettes
INSTALLATION OF MOUNTING HANGERS
Depending on the type of ceiling, threaded hanger bolts (field supplied) are recommended for securing
Ceiling Cassette to the ceiling or support studs.
Proper mounting hardware is critical which includes upper nuts, lower flat washers (with insulation), top
flat washers (without insulation), top nuts and locking nuts (double) on the threaded hanger bolts as show
in diagram below.
FPO
Mounting
Bracket
Ceiling
Threaded
Hanger Bolt
Nut
Washer
Washer
Nut
Nut
52
CONDENSATE DRAIN DESIGNS
It’s recommended to build the condensate drain system with hard polyvinyl chloride (PVC) pipe and matching
connectors. Use pipe with either the same diameter or larger than the unit drainage port.
Ceiling
Hangers
Wall
Gravity Drainage Systems with P-trap & Vent
Pitch the condensate drain pipes at a gradual 2.5%
pitch (Example: 1/4-in. drop over a 10-in. length)
without obstructions. Use pipe hanger/brackets to
support the condensate drain pipe from drooping.
Insulate all pipes to prevent sweating and water
damage.
Wall
Hanger
Ceiling
Multiple Units with Common Drain
Wall
The following is the recommended condensate
drainage system for multiple units that share a
common drain line. Connecting multiple units to one
trap allows air to be pulled through one or more of
the units, bypassing the trap. An alternate method
is having individual drains and traps for each unit.
Ceiling
If a gradual pitch from the drainage port is not
obtainable, the Ceiling Cassette contains an internal
condensate pump with limited head or lift. The
condensate drain pipe may have a vertical height of
11-in. (280 mm) maximum above the unit drainage
port within the first 12-in. (300 mm) as long as the
remaining condensate drain pipe gradually descends
from that point and aligns with drainage port.
Use an auxiliary condensate pump with float valve
for vertical height greater than 11-in. (280 mm) above
the unit drainage port. A float valve is recommended
to shut off the system if the auxiliary pump fails.
53
Hangers
11-in
max
12-in
max
Wall
Vertical Lift Drainage System
MULTI SLIM
CONCEALED DUCTS
Models:
DUCT09HP230V1AD
DUCT12HP230V1AD
DUCT18HP230V1AD
DUCT24HP230V1AD
+Multi Slim Concealed Ducts
Table of Contents
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . 56-57
Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Product Performance Data . . . . . . . . . . . . . . . . . . . . . 58-61
Dimensional Specifications . . . . . . . . . . . . . . . . . . . . 62-64
Duct Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Sizing Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Installation of Mounting Hangers . . . . . . . . . . . . . . . . . . 66
Condensate Drain Designs . . . . . . . . . . . . . . . . . . . . . . . . 67
+Multi Slim Concealed Ducts
Compact and powerful, the Gree Multi+ Concealed Duct indoor units offer the ultimate in flexibility and discretion. These slim indoor
units are designed to be concealed above suspended ceilings or within open closet spaces to deliver conditioned air via ducting and
suitable ceiling or wall grilles. This arrangement provides immense flexibility, in terms of both the distribution of conditioned air and the type
of grille or diffuser that best complements the room’s styling. Each unit comes with an easy-to-operate wall mounted wired tether controller.
FEATURES AND BENEFITS
Whisper Quiet
Not only are the Gree systems energy efficient but they are quiet too. Wall mounted units operate
with sound levels starting as low as 31 dB(A).
Convenient Size (12K and 18K only)
The Gree ceiling cassettes can be easily mounted in a hard ceiling (with an access panel for servicing)
or in 2’x2’ drop ceiling. They provide great air distribution, quiet operation and a less obtrusive style.
Multi Fan Speeds
The indoor fan can run at up to three different speeds (Low, Medium or High) for either COOLING or
HEATING mode for maximum comfort and quiet operation.
Built In Condensate Lift Pump
The unit features a built-in drain pump that lifts condensation up to 11 inches above the drain pan to a
gravity condensate drain system. In most cases, the internal condensate lift mechanism will avoid the
need for an external condensate pump.
Condensate Sentry
The unit’s fail-safe mechanism recognizes when there is a high level in the condensate pan and shuts
off the system to prevent overflow problems.
Intelligent Pre-Heating
The Multi Zone system guards against the annoying COLD BLOW in heating mode. The system constantly
monitors the discharge air temperature. It will delay the indoor fan until the indoor coil has warmed
up to prevent blowing uncomfortable cool air into the room.
Tether Controller
The Gree wired tether controller mounts to the wall up to 25 feet from the unit. It provides complete
control over your unit’s operation mode, desired temperature, fan speed, airflow direction and more.
56
FEATURES AND BENEFITS
Mode Button
The units can be set to five different operating modes: HEAT, COOL, DRY, FAN ONLY and AUTO.
Note: AUTO MODE has fixed setpoints of 68° F heating and 78° F cooling, which are not changeable.
The system will automatically select heating or cooling to maintain room temperature within this band.
Timer Mode
The unit can be programmed to turn ON or OFF after a specific amount of time. The time period is
adjustable between one half and 24 hours.
Sleep Mode
The unit will automatically adjust room temperature during your sleep time. This slight change in
temperature will not affect your comfort level due to the natural effects that sleeping has on the
body, but it will save on energy consumption and will lower electric bills.
Fahrenheit °F / Celsius °C
The wired tether controller can be set to display in either °F or °C.
Power Failure Mode
Power interruptions are no problem. User selections and system parameters are stored in non-volatile
memory. These parameters are retained during a power failure. When power is returned, the system
will automatically return to the last operating mode.
Self-Diagnosis
With an on-board computer using real-time diagnostics, the Gree Multi Zone system helps to prolong
its own life. The automatic diagnosis feature continuously scans for unacceptable operating conditions
or malfunctions. If such conditions occur, the system takes corrective action or stops. Fault codes are
shown on the unit display to facilitate easy troubleshooting and repair.
Privacy Lock Mode
The wired tether controller has a Privacy Lock. The Privacy Lock averts unauthorized access and stops
tampering with system settings.
Agency Listings
All systems are listed with AHRI (Air conditioning, Heating, and Refrigeration Institute) and are ETL
certified per UL Standards.
7/5 Year Limited Warranty
Enjoy one of the most comprehensive warranties in the industry. Seven (7) years on compressor
and Five (5) years on all parts.
57
+Multi Slim Concealed Ducts
NOMENCLATURE
Series Designation
DUCT - Slim Duct Indoor Unit
MULTI - Multiple Port Outdoor Unit
NEO - Neo Indoor High Wall
CAS - Ceiling Cassette
FLR - Floor/Ceiling Unit
CONS - Mini Console
DUCT
12 HP
230V
1 A D
Product Type
S - System
O - Outdoor Units
H - Indoor High Wall
D - Indoor Duct
C - Indoor Cassette
F - Indoor Floor/Ceiling
Cooling Capacity
9 - 9,000 BtuH
12 - 12,000 BtuH
18 - 18,000 BtuH
24 - 24,000 BtuH
Revision Level
Style/Color Designation
Model Type
AC - Cooling Only
HP - Heat Pump
HC - Heat/Cool
Electrical Rating
230V - 208/230V 60Hz 1PH
115V - 115V 60Hz 1PH
PERFORMANCE SPECIFICATIONS AND DATA
Slim Concealed Duct
COOLING CAPACITY
(BtuH)
HEATING CAPACITY
(BtuH)
dehumidification
(Pts./hr.)
DUCT09HP230V1AD
8,533
9,556
1.69
DUCT12HP230V1AD
11,946
13,140
2.96
DUCT18HP230V1AD
15,359
18,772
3.80
DUCT24HP230V1AD
24,232
27,304
5.28
MODEL NUMBER
Slim Concealed Duct
LOW FAN
COOLING (CFM)
MEDIUM FAN
HIGH FAN
DUCT09HP230V1AD
147
177
265
DUCT12HP230V1AD
177
235
324
DUCT18HP230V1AD
294
353
412
DUCT24HP230V1AD
324
441
589
LOW FAN
HEATING (CFM)
MEDIUM FAN
HIGH FAN
DUCT09HP230V1AD
147
177
265
DUCT12HP230V1AD
177
235
324
DUCT18HP230V1AD
294
353
412
DUCT24HP230V1AD
324
441
589
MODEL NUMBER
Slim Concealed Duct
MODEL NUMBER
58
SOUND DATA
Slim Concealed Duct
MODEL NUMBER
LOW FAN
MEDIUM FAN
HIGH FAN
SOUND
POWER
SOUND
PRESSURE
SOUND
POWER
SOUND
PRESSURE
SOUND
POWER
DUCT09HP230V1AD
41
31
44
34
47
37
DUCT12HP230V1AD
42
32
45
35
49
39
DUCT18HP230V1AD
43
33
47
37
51
41
DUCT24HP230V1AD
44
34
48
38
52
42
Note:
SOUND
PRESSURE
1. Sound pressure ratings are estimated sound pressure measurements, 3 feet from unit.
2. Sound power ratings are per AHRI 270 and AHRI 350
ELECTRICAL DATA
Slim Concealed Duct
INDOOR FAN
RLA (amps) POWER (watts)
RATED POWER SUPPLY
(volt-phase-hz)
VOLTAGE RANGE
(volts)
DUCT12HP230V1AD
208/230v-1ph-60hz
187-253
0.35
80
DUCT12HP230V1AD
208/230v-1ph-60hz
187-253
0.35
80
DUCT18HP230V1AD
208/230v-1ph-60hz
187-253
0.43
100
DUCT24HP230V1AD
208/230v-1ph-60hz
187-253
0.54
124
MODEL NUMBER
Legend:
RLA – Rated Load Amps
PRODUCT WEIGHT
Slim Concealed Duct
MODEL NUMBER
PRODUCT WEIGHT
NET OPERATING
GROSS SHIPPING
DUCT09HP230V1AD
49 lbs.
60 lbs.
DUCT12HP230V1AD
51 lbs.
64 lbs.
DUCT18HP230V1AD
60 lbs.
79 lbs.
DUCT24HP230V1AD
68 lbs.
90 lbs.
59
+Multi Slim Concealed Ducts
INDOOR FAN PERFORMANCE AND AIR FLOW
Model No: DUCT09HP230V1AD
9,000 BtuH
Model No: DUCT12HP230V1AD
12,000 BtuH
60
INDOOR FAN PERFORMANCE AND AIR FLOW
Model No: DUCT18HP230V1AD
18,000 BtuH
Model No: DUCT24HP230V1AD
24,000 BtuH
61
+Multi Slim Concealed Ducts
DIMENSIONAL SPECIFICATIONS
Model No: DUCT09HP230V1AD
9,000 BtuH
Model No: DUCT12HP230V1AD
12,000 BtuH
G
Electric Box
Liquid Pipe
Gas Pipe
Side
Return Air
I
H
E
Bottom
Return Air
A
Drain Pipe
F
D
J
B
C
Dimension
(mm)
(inches)
A
742
29.2
B
491
19.3
C
662
26.1
D
620
24.4
E
700
27.6
F
615
24.2
G
782
30.8
H
156
6.1
I
200
7.9
J
635
25.0
Suction/Gas Line Port Size
Port 1
3/8-in OD Flared
Liquid Line Port Size
Port 1
1/4-in OD Flared
Drain Connector
Drain Line
1.0-in OD
Note: Size refrigerant lines based on
evaporator port sizes.
62
DIMENSIONAL SPECIFICATIONS
Model No: DUCT18HP230V1AD
18,000 BtuH
G
Electric Box
Liquid Pipe
Gas Pipe
Side
Return Air
I
H
E
Bottom
Return Air
A
Drain Pipe
F
D
J
B
C
Dimension
(mm)
(inches)
A
942
37.1
B
491
19.3
C
862
33.9
D
820
32.3
E
900
35.4
F
615
24.2
G
982
38.7
H
156
6.1
I
200
7.9
J
635
25.0
Suction/Gas Line Port Size
Port 1
1/2-in OD Flared
Liquid Line Port Size
Port 1
1/4-in OD Flared
Drain Connector
Drain Line
1.0-in OD
Note: Size refrigerant lines based on
evaporator port sizes.
63
+Multi Slim Concealed Ducts
DIMENSIONAL SPECIFICATIONS
Model No: DUCT24HP230V1AD
24,000 BtuH
G
Electric Box
Liquid Pipe
Gas Pipe
Side
Return Air
I
H
E
Bottom
Return Air
A
Drain Pipe
F
D
J
B
C
Dimension
(mm)
(inches)
A
1124
44.3
B
491
19.3
C
1062
41.8
D
1020
40.2
E
1100
43.3
F
615
24.2
G
1182
46.5
H
156
6.1
I
200
7.9
J
635
25.0
Suction/Gas Line Port Size
Port 1
5/8-in OD Flared
Liquid Line Port Size
Port 1
3/8-in OD Flared
Drain Connector
Drain Line
1.0-in OD
Note: Size refrigerant lines based on
evaporator port sizes.
64
DUCT DESIGN
Concealed Duct
Return Air
Option 1
Return Air
Option 2
Supply
Air
Typical Ductwork Layout
Rectangular Flange
Back Return Air
Downward Air
Return
Return Air
Cover Plate
65
+Multi Slim Concealed Ducts
DUCT SIZING SPECIFICATIONS
E
D
A
B
C
Dimensions
MODEL NUMBER
SUPPLY DUCT
(in/mm)
A
B
RETURN DUCT
(in/mm)
C
D
FLANGE
(in/mm)
E
DUCT09P230V1AD
6.1/156
26.1/662
22.8/580
6.4/162
0.8/21
DUCT12P230V1AD
6.1/156
26.1/662
22.8/580
6.4/162
0.8/21
DUCT18P230V1AD
6.1/156
33.9/862
30.7/780
6.4/162
0.8/21
DUCT24P230V1AD
6.1/156
41.8/1062
38.6/980
6.4/162
0.8/21
INSTALLATION OF MOUNTING HANGERS
Depending on the type of ceiling, threaded hanger bolts (field supplied) are recommended for securing the
Concealed Duct to the ceiling or support studs.
Proper mounting hardware is critical, which includes upper nuts, lower flat washers (with insulation), top flat
washers (without insulation), top nuts and locking nuts (double) on the threaded hanger bolts as show in
diagram below.
Threaded
Hanger Bolt
Nut
Washer
Washer
Nut
Nut
66
CONDENSATE DRAIN DESIGNS
It’s recommended to build the condensate drain system with hard polyvinyl chloride (PVC) pipe and matching
connectors. Use pipe with either the same diameter or larger than the unit drainage port.
Ceiling
Hangers
Wall
Gravity Drainage Systems
with P-trap & Vent
Pitch the condensate drain pipes at a gradual
2.5% pitch (Example: 1/4-in. drop over a 10-in.
length) without obstructions. Use pipe hanger/
brackets to support the condensate drain pipe
from drooping. Insulate all pipes to prevent
sweating and water damage.
Ceiling
Wall
Hangers
Multiple Units with Common Drain
Ceiling
Wall
The following is the recommended condensate
drainage system for multiple units that share a
common drain line. Connecting multiple units
to one trap allows air to be pulled through one
or more of the units, bypassing the trap. An
alternate method is having individual drains
and traps for each unit.
Vertical Lift Drainage System
If a gradual pitch from the drainage port is not
obtainable, the Concealed Duct contains an
internal condensate pump with limited head or
lift. The condensate drain pipe may have a
vertical height of 11-in. (280 mm) maximum
above the unit drainage port within the first
12-in. (300 mm) as long as the remaining
condensate drain pipe gradually descends
from that point and aligns with drainage port.
Ceiling
Hangers
Wall
11-in
max
Use an auxiliary condensate pump with float
valve for vertical height greater than 11-in.
(280 mm) above the unit drainage port. A float
valve is recommended to shut off the system
if the auxiliary pump fails.
12-in
max
67
MULTI UNIVERSAL
FLOOR/CEILING
Models:
FLR09HP230V1AF
FLR12HP230V1AF
FLR18HP230V1AF
FLR24HP230V1AF
+Multi Universal Floor/Ceiling
Table of Contents
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . 70-72
Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Product Performance Data . . . . . . . . . . . . . . . . . . . . 73-74
Dimensional Specifications . . . . . . . . . . . . . . . . . . . . . . . 75
Clearance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 76
Installation of Mounting Hangers . . . . . . . . . . . . . . . . . . 77
+Multi Universal Floor/Ceiling
Our Multi+ Universal Floor/Ceiling indoor units are designed to be suspended from a ceiling or mounted low on a wall. The slender and
lightweight design is perfect for restaurants or hallways where wall space is limited. Aesthetically pleasing to the eye, the Multi+ Universal
Floor/Ceiling units are a great fit beneath windows, in public or light commercial applications. Each unit can be operated by an infrared
remote controller or wired tether controller to allow maximum flexibility in any application.
FEATURES AND BENEFITS
Whisper Quiet
Not only are the Gree systems energy efficient but they are quiet too. Wall mounted units operate
with sound levels starting as low as 36 dB(A).
Modern Appearance
Designed to be a comfortable fit in virtually any living space. This slim compact cabinet sits
inconspicuously on the wall, and blends into most interior designs.
Unit Display
Gree wall mounted units have a large easy to read display and indicator lights giving instant feedback
on room setpoint, operating mode and much more. The display can also be turned off based on your
personal preference.
Multi Fan Speeds
The indoor fan can run at up to three different speeds (Low, Medium or High) for either COOLING or
HEATING mode for maximum comfort and quiet operation.
Time Guard
The Multi Zone system is equipped with many system safeties to provide safe, reliable operation and
comfort. The Time Guard function prevents rapid cycling of the compressor. The system has a protective
five-minute time delay to restart the compressor after it has turned off.
Power Failure Mode
Power interruptions are no problem. User selections and system parameters are stored in non-volatile
memory. These parameters are retained during a power failure. When power is returned, the system
will automatically return to the last operating mode.
Intelligent Pre-Heating
The Multi Zone system guards against the annoying COLD BLOW in heating mode. The system constantly
monitors the discharge air temperature. It will delay the indoor fan until the indoor coil has warmed
up to prevent blowing uncomfortable cool air into the room.
70
FEATURES AND BENEFITS
Controller
The unit comes with a factory supplied wired Tether Controller or Wireless Remote Controller.
Note: the controllers are mutually exclusive. They cannot be used at the same time.
IR Wireless Remote Controller
The Gree multi-functional infrared hand held wireless controller is sleek, ergonomically designed, easy to use and has a large backlit LCD display.
Tether Controller
The Gree tether controller mounts to the wall up to 25 feet from the unit. It provides complete
control over operation mode, desired temperature, fan speed, airflow direction and more.
Mode Button
The units can be set to five different operating modes: HEAT, COOL, DRY, FAN ONLY and AUTO.
Note: AUTO MODE has fixed setpoints of 68° F heating and 78° F cooling, which are not changeable.
The system will automatically select heating or cooling to maintain room temperature within this band.
Timer Mode
The unit can be programmed to turn ON or OFF after a specific amount time. The time period is
adjustable between one half and 24 hours.
Swing Louver
The unit has adjustable swing louvers which can be controlled from the wired tether or wireless
controllers. Vertical swing louver allows five different vertical (up & down) air discharge directions
including Continuous Sweep. Maximize comfort by adjusting the direction of airflow in the room by
moving the louvers up or down.
Privacy Lock Mode
Both wired tether and wireless controllers have a Privacy Lock to avert unauthorized access and stop
tampering with system settings.
Sleep Mode
The unit will automatically adjust room temperature during sleep time. This slight change in
temperature will not affect your comfort level due to the natural effects that sleeping has on the
body, but it will save on energy consumption and will lower electric bills.
Fahrenheit °F / Celsius °C
The wired tether and wireless controllers can be set to display in either °F or °C.
Easy To Clean Air Filter
A removable air filter easily slides in and out from the front of the indoor unit. The front panel does
not need to be removed to access or change the filter. The filter is washable and permanent.
71
+Multi Universal Floor/Ceiling
FEATURES AND BENEFITS
Self-Diagnosis
With an on-board computer using real-time diagnostics, the Gree Multi Zone system helps to
prolong its own life. The automatic diagnosis feature continuously scans for unacceptable operating
conditions or malfunctions. If such conditions occur, the system takes corrective action or stops.
Fault codes are shown on the unit display to facilitate easy troubleshooting and repair.
Agency Listings
All systems are listed with AHRI (Air conditioning, Heating, and Refrigeration Institute) and are ETL
certified per UL Standards.
7/5 Year Limited Warranty
Enjoy one of the most comprehensive warranties in the industry. Seven (7) years on compressor
and Five (5) years on all parts.
NOMENCLATURE
FLR
12 HP
230V
Series Designation
FLR - Floor/Ceiling Unit
MULTI - Multiple Port Outdoor Unit
DUCT - Slim Duct Indoor Unit
CAS - Ceiling Cassette
NEO - Neo Indoor High Wall
CONS - Mini Console
1 A
F
Product Type
S - System
O - Outdoor Units
H - Indoor High Wall
D - Indoor Duct
C - Indoor Cassette
F - Indoor Floor/Ceiling
Cooling Capacity
9 - 9,000 BtuH
12 - 12,000 BtuH
18 - 18,000 BtuH
24 - 24,000 BtuH
Revision Level
Style/Color Designation
Model Type
AC - Cooling Only
HP - Heat Pump
HC - Heat/Cool
Electrical Rating
230V - 208/230V 60Hz 1PH
115V - 115V 60Hz 1PH
72
PERFORMANCE SPECIFICATIONS & DATA
Universal Floor/Ceiling
MODEL NUMBER
COOLING CAPACITY
(BtuH)
HEATING CAPACITY
(BtuH)
dehumidification
(Pts./hr.)
FLR09HP230V1AF
8,533
9,556
1.7
FLR12HP230V1AF
11,946
13,140
3.0
FLR18HP230V1AF
17,065
18,772
3.8
FLR24HP230V1AF
22,867
27,304
5.1
Universal Floor/Ceiling
MODEL NUMBER
AIR FILTER TYPE
AIR FLOW
FAN TYPE
FLR09HP230V1AF
Polymeric Mesh
4-way
Centrifugal
FLR12HP230V1AF
Polymeric Mesh
4-way
Centrifugal
FLR18HP230V1AF
Polymeric Mesh
4-way
Centrifugal
FLR24HP230V1AF
Polymeric Mesh
4-way
Centrifugal
Universal Floor/Ceiling
MODEL NUMBER
LOW
FAN
FLR09HP230V1AF
COOLING (CFM)
MEDIUM
FAN
HIGH
FAN
LOW
FAN
265
324
383
FLR12HP230V1AF
265
324
FLR18HP230V1AF
294
FLR24HP230V1AF
412
HEATING (CFM)
MEDIUM
FAN
HIGH
FAN
265
324
383
383
265
324
383
412
559
294
412
559
530
736
412
530
736
73
+Multi Universal Floor/Ceiling
SOUND DATA
Universal Floor/Ceiling
MODEL NUMBER
LOW FAN
MEDIUM FAN
HIGH FAN
SOUND
POWER
SOUND
PRESSURE
SOUND
POWER
SOUND
PRESSURE
SOUND
POWER
SOUND
PRESSURE
FLR09HP230V1AF
46 dBA
36 dBA
48 dBA
38 dBA
50 dBA
40 dBA
FLR12HP230V1AF
46 dBA
36 dBA
48 dBA
38 dBA
50 dBA
40 dBA
FLR18HP230V1AF
50 dBA
40 dBA
52 dBA
42 dBA
55 dBA
45 dBA
FLR24HP230V1AF
54 dBA
44 dBA
56 dBA
46 dBA
58 dBA
48 dBA
Note:
1. Sound pressure ratings are estimated sound pressure measurements, 3 feet from unit.
2. Sound power ratings are per AHRI 270 and AHRI 350
ELECTRICAL DATA
Universal Floor/Ceiling
INDOOR FAN
RLA (amps) POWER (watts)
MODEL NUMBER
RATED POWER SUPPLY
(volt-phase-hz)
VOLTAGE RANGE
(volts)
FLR09HP230V1AF
208/230v-1ph-60hz
187-253
0.30
55
FLR12HP230V1AF
208/230v-1ph-60hz
187-253
0.30
55
FLR18HP230V1AF
208/230v-1ph-60hz
187-253
0.60
110
FLR24HP230V1AF
208/230v-1ph-60hz
187-253
0.60
145
Legend:
RLA – Rated Load Amps
PRODUCT WEIGHT
Universal Floor/Ceiling
MODEL NUMBER
PRODUCT WEIGHT
NET OPERATING
GROSS SHIPPING
FLR09HP230V1AF
88 lbs.
110 lbs.
FLR12HP230V1AF
88 lbs.
110 lbs.
FLR18HP230V1AF
88 lbs.
110 lbs.
FLR24HP230V1AF
100 lbs.
120 lbs.
74
DIMENSIONAL SPECIFICATIONS
H
A
B
D
C
Dimensions
MODEL NUMBER
A
FLR09HP230V1AF
48/1220
FLR12HP230V1AF
B
C
D
H
8.9/225
45.6/1158
11/280
27.6/700
48/1220
8.9/225
45.6/1158
11/280
27.6/700
FLR18HP230V1AF
48/1220
8.9/225
45.6/1158
11/280
27.6/700
FLR24HP230V1AF
48/1220
8.9/225
45.6/1158
11/280
27.6/700
LIQUID LINE
PORT SIZE
DRAIN
CONNECTOR
FLR09HP230V1AF
1/4-in OD Flared
0.67in/17mm OD
FLR12HP230V1AF
1/4-in OD Flared
0.67in/17mm OD
FLR18HP230V1AF
1/4-in OD Flared
0.67in/17mm OD
FLR24HP230V1AF
3/8-in OD Flared
0.67in/17mm OD
MODEL NUMBER
SUCTION/GAS LINE
PORT SIZE
Note: Size refrigerant lines based on evaporator port sizes.
75
+Multi Universal Floor/Ceiling
MINIMUM INDOOR CLEARANCE SPECIFICATIONS
The unit installation must meet or exceed the following minimum clearances for proper operation.
> 5ft
> 2ft
> 2ft
> 3ft
> 1ft
> 9-in
> 2ft
> 5ft
> 2ft
> 7.5ft
76
> 1ft
INSTALLATION OF MOUNTING HANGER
Depending on the type of ceiling, threaded hanger bolts (field supplied) are recommended for securing
Floor/Ceiling unit to the ceiling or support studs.
Proper mounting hardware is critical which includes upper nuts, lower flat washers (with insulation),
top flat washers (without insulation), top nuts and locking nuts (double) on the threaded hanger bolts
as shown in diagram below.
Threaded
Hanger Bolt
Nut
Washer
Washer
Nut
Nut
77
MULTI MINI-FLOOR
CONSOLES
Models:
CONS09HP230V1AF
CONS12HP230V1AF
CONS18HP230V1AF
+Multi Mini-Floor Consoles
Table of Contents
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . 80-81
Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Clearance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 82
Product Performance Data . . . . . . . . . . . . . . . . . . . . 83-84
Dimensional Specifications . . . . . . . . . . . . . . . . . . . . . . . 85
+Multi Mini-Floor Consoles
Gree’s +Multi Mini Console indoor units are aesthetically pleasing and the perfect size for any room. The space saving design provides
energy efficient solutions for difficult areas that may not have abundant space on the ceiling or walls. It can be mounted as low as six
inches above the floor and has front panel access to the filter for ease of cleaning. Each +Multi Mini Console unit can be operated by
an infrared remote controller.
FEATURES AND BENEFITS
Whisper Quiet
Gree systems are energy efficient and quiet. Wall mounted units operate with sound levels starting
as low as 25 dB(A).
Modern Appearance
Designed to be a comfortable fit in virtually any living space. This slim compact cabinet sits
inconspicuously on the wall, and blends into most interior designs.
Unit Display
Gree wall mounted units have a large, easy-to-read display and indicator lights giving instant feedback
on room setpoint, operating mode and much more. The display can also be turned off based on your
personal preference.
Multi-Speed Fan
The indoor fan can run at up to four different speeds (Low, Medium, High or Turbo) for either
COOLING or HEATING mode for maximum comfort and quiet operation.
Time Guard
Among the system’s many safeties is a Time Guard function to prevent rapid cycling of the compressor.
A protective five-minute time delay restricts compressor restarts after shutoff.
Power Failure Mode
Power interruptions are no problem. User selections and system parameters are stored in non-volatile
memory. These parameters are retained during a power failure. When power is returned, the system
will automatically return to the last operating mode.
Intelligent Pre-Heating
The Multi Zone system guards against the annoying COLD BLOW in heating mode, and constantly
monitors the discharge air temperature. It will delay the indoor fan until the indoor coil has warmed
up to prevent blowing uncomfortable cool air into the room.
IR Wireless Remote Controller
The Gree Multi-functional infrared hand held wireless controller is sleek, ergonomically designed,
easy to use and has a large backlit LCD display.
80
FEATURES AND BENEFITS
Mode Button
The units can be set to five different operating modes: HEAT, COOL, DRY, FAN ONLY and AUTO.
Note: AUTO MODE has fixed setpoints of 68° F heating and 78° F cooling, which are not changeable.
The system will automatically select heating or cooling to maintain room temperature within this band.
Timer Mode
The unit can be programmed to turn ON or OFF after a specific amount time. The time period
is adjustable between one half and 24 hours.
Swing Louver
The unit has adjustable swing louvers which can be controlled from the wireless controller. Vertical
swing louver allows five different vertical (up & down) air discharge directions including Continuous
Sweep. Maximize comfort by adjusting the direction of airflow in the room by moving the louvers
up or down.
Privacy Lock Mode
The wireless controller has a Privacy Lock to avert unauthorized access and stop tampering with
system settings.
Sleep Mode
The unit will automatically adjust room temperature during sleep time. This slight change in
temperature will not affect your comfort level due to the natural effects that sleeping has on the
body, but it will save on energy consumption and will lower electric bills.
Fahrenheit °F / Celsius °C
The wireless controller can be set to display in either °F or °C.
Easy To Clean Air Filters
Removable air filters easily slide in and out from the front of the indoor unit. The front panel does
not need to be removed to access or change the filter. The filters are washable and permanent.
Self-Diagnosis
With an on-board computer using real-time diagnostics, the Gree Multi Zone system helps to
prolong its own life. The automatic diagnosis feature continuously scans for unacceptable operating
conditions or malfunctions. If such conditions occur, the system takes corrective action or stops.
Fault codes are shown on the unit display to facilitate easy troubleshooting and repair.
Agency Listings
All systems are listed with AHRI (Air conditioning, Heating, and Refrigeration Institute) and are
ETL Certified per UL Standards.
7/5 Year Limited Warranty
Enjoy one of the most comprehensive warranties in the industry. Seven (7) years on compressor
and Five (5) years on all parts.
81
+Multi Mini-Floor Consoles
NOMENCLATURE
CONS
12 HP
230V
Series Designation
NEO - Neo Indoor High Wall
MULTI - Multiple Port Outdoor Unit
DUCT - Slim Duct Indoor Unit
CAS - Ceiling Cassette
FLR - Floor/Ceiling Unit
CONS - Mini Console
1 A
F
Product Type
S - System
O - Outdoor Units
H - Indoor High Wall
D - Indoor Duct
C - Indoor Cassette
F - Indoor Floor/Ceiling
Cooling Capacity
9 - 9,000 BtuH
12 - 12,000 BtuH
18 - 18,000 BtuH
Revision Level
Style/Color Designation
Model Type
AC - Cooling Only
HP - Heat Pump
HC - Heat/Cool
Electrical Rating
230V - 208/230V 60Hz 1PH
115V - 115V 60Hz 1PH
MINIMUM INDOOR CLEARANCE SPECIFICATIONS
The unit installation must meet or exceed the following minimum clearances for proper operation.
A
B
D
C
82
Dimension
(inches)
(mm)
A
59
1500
B
59
1500
C
6
150
D
59
1500
PERFORMANCE SPECIFICATIONS & DATA
Mini-Floor Console
COOLING CAPACITY
(BtuH)
HEATING CAPACITY
(BtuH)
dehumidification
(Pts./hr.)
CONS09HP230V1AF
8,874
9,556
1.7
CONS12HP230V1AF
11,946
12,969
3.0
CONS18HP230V1AF
18,089
19,795
3.8
MODEL NUMBER
Mini-Floor Console
MODEL NUMBER
AIR FILTER TYPE
AIR FLOW
FAN TYPE
CONS09HP230V1AF
Polymeric Mesh
4-way
Centrifugal
CONS12HP230V1AF
Polymeric Mesh
4-way
Centrifugal
CONS18HP230V1AF
Polymeric Mesh
4-way
Centrifugal
Mini-Floor Console
MODEL NUMBER
COOLING (CFM)
MEDIUM
2 FAN
MEDIUM
3 FAN
MEDIUM
4 FAN
HIGH
FAN
165
194
241
253
294
165
212
235
283
306
353
188
241
265
324
365
383
LOW
FAN
MEDIUM
1 FAN
MEDIUM
2 FAN
MEDIUM
3 FAN
MEDIUM
4 FAN
HIGH
FAN
CONS09HP230V1AF
147
165
194
241
253
294
CONS12HP230V1AF
165
212
235
283
306
353
CONS18HP230V1AF
188
241
265
324
365
383
LOW
FAN
MEDIUM
1 FAN
MEDIUM
2 FAN
MEDIUM
3 FAN
MEDIUM
4 FAN
HIGH
FAN
CONS09HP230V1AF
2.0
3.6
2.9
3.6
3.9
4.5
CONS12HP230V1AF
2.5
3.1
3.4
4.1
4.6
5.0
CONS18HP230V1AF
3.0
3.4
4.1
4.4
5.1
5.5
LOW
FAN
MEDIUM
1 FAN
CONS09HP230V1AF
147
CONS12HP230V1AF
CONS18HP230V1AF
Mini-Floor Console
MODEL NUMBER
HEATING (CFM)
AIR THROW DATA
Mini-Floor Console
MODEL NUMBER
83
HEATING (CFM)
+Multi Mini-Floor Consoles
SOUND DATA
Mini-Floor Console – Sound Pressure
LOW
FAN
MEDIUM
1 FAN
MEDIUM
2 FAN
MEDIUM
3 FAN
MEDIUM
4 FAN
HIGH
FAN
CONS09HP230V1AF
25 dBA
26 dBA
30dBA
36 dBA
38 dBA
40 dBA
CONS12HP230V1AF
27 dBA
32 dBA
35 dBA
38 dBA
40 dBA
43 dBA
CONS18HP230V1AF
33 dBA
35 dBA
37 dBA
44 dBA
46 dBA
48 dBA
MODEL NUMBER
Mini-Floor Console – Sound Power
LOW
FAN
MEDIUM
1 FAN
MEDIUM
2 FAN
MEDIUM
3 FAN
MEDIUM
4 FAN
HIGH
FAN
CONS09HP230V1AF
35 dBA
36 dBA
40dBA
46 dBA
48 dBA
50 dBA
CONS12HP230V1AF
37 dBA
42 dBA
45 dBA
48 dBA
50 dBA
53 dBA
CONS18HP230V1AF
43 dBA
45 dBA
47 dBA
54 dBA
56 dBA
58 dBA
MODEL NUMBER
Note:
1. Sound pressure ratings are estimated sound pressure measurements, 3 feet from unit.
2. Sound power ratings are per AHRI 270 and AHRI 350.
ELECTRICAL DATA
Mini-Floor Console
INDOOR FAN
RLA (amps) POWER (watts)
RATED POWER SUPPLY
(volt-phase-hz)
VOLTAGE RANGE
(volts)
CONS09HP230V1AF
208/230v-1ph-60hz
187-253
0.3
30.0
CONS12HP230V1AF
208/230v-1ph-60hz
187-253
0.3
30.0
CONS18HP230V1AF
208/230v-1ph-60hz
187-253
0.3
30.0
MODEL NUMBER
Legend:
RLA – Rated Load Amps
PRODUCT WEIGHT
Mini-Floor Console
MODEL NUMBER
PRODUCT WEIGHT
NET OPERATING
GROSS SHIPPING
CONS09HP230V1AF
30 lbs.
40 lbs.
CONS12HP230V1AF
30 lbs.
40 lbs.
CONS18HP230V1AF
30 lbs.
40 lbs.
84
DIMENSIONAL SPECIFICATIONS
A
H
B
C
Dimension
(inches)
(mm)
A
27.6
700
B
8.5
215
C
7.875
200
H
23.6
600
SUCTION/GAS LINE
PORT SIZE
LIQUID LINE
PORT SIZE
DRAIN
CONNECTOR
CONS09HP230V1AF
3/8-in OD Flared
1/4-in OD Flared
0.67in/17mm OD
CONS12HP230V1AF
3/8-in OD Flared
1/4-in OD Flared
0.67in/17mm OD
CONS18HP230V1AF
1/2-in OD Flared
1/4-in OD Flared
0.67in/17mm OD
MODEL NUMBER
Note: Size refrigerant lines based on evaporator port sizes.
85
WIRED TETHER
CONTROLLER
Part Numbers:
MC20700140 - XK-19
MC207059 - XK-41
Wired Tether Controller
Table of Contents
Reference Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . 88-89
Dimensional Specifications . . . . . . . . . . . . . . . . . . . . . . . 90
System Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Limited Warranty Statement . . . . . . . . . . . . . . . . . . . 92-93
Wired Tether Controller
REFERENCE TABLE
INDOOR UNIT
TETHER CONTROLLER
TYPE
PART NUMBER
NEO WALL MOUNT
XK-41
MC207059
CEILING CASSETTE
XK-19
MC207001140
SLIM CONCEALED DUCT
XK-19
MC207001140
UNIVERSAL FLOOR CEILING
XK-19
MC207001140
MINI-FLOOR CONSOLE
XK-19
MC207001140
FEATURES AND BENEFITS
Attractive Appearance
The XK series features a sleek, unobtrusive design that fits seamlessly into any décor.
Easy To Install
The XK series Wired Tether Controllers have been designed for fast and easy installation to save you
time and money. Each XK wired controller comes with keyed connectors and 26 feet of cable. Its
flexible design allows it to be mounted either flush to the wall or using an electrical box.
Command Center
Enjoy the convenience of a fully functional command center with a large LCD display to set up and
operate your duct free system. The XK series allows you fast and easy access to a large number of
system features and functions:
Note: Some indoor units may not support specific system features or functions. Always refer to the
indoor unit Owner’s Manual.
On/Off
The XK series allows you to start and stop your system. The system will always start up in the last operating mode with the last room setpoint.
Operating Mode
The system allows users to effortlessly select an operating mode (Cooling, Heating, Dry,
Fan Only or Auto mode) with a single key stroke.
88
FEATURES AND BENEFITS
Command Center (cont.)
Fan Speed
The system fan speed (High, Medium, Low or Auto) can be adjusted for peak room comfort
and quietness.
Room Setpoint
The XK series makes dialing in the correct room setpoint temperature a breeze. Most indoor
units allow a room setpoint from 61° F to 86° F (16° to 30° C).
Timer Mode
When needed, the XK series allows you the ability to program a time period (one-half to
24 hours) to which your system will automatically turn ON or OFF.
Sleep Mode
The XK series will automatically adjust room temperature during your sleep time. This slight
change in temperature will not affect your comfort level due to the natural effects that
sleeping has on the body, but it will save on energy consumption and will lower electric bills.
Turbo Mode
Whether you need to heat up or cool down a room quickly, Turbo Mode will force your system
to run at higher speeds to reach the desired room temperature faster.
X-Fan Mode
The X-Fan function can be activated from the XK series to remove moisture buildup when the
system is turned OFF. This helps prevent mold and mildew growth on your indoor coil and fan.
Privacy Lock
The XK series has a Privacy Lock that can be set to prevent unauthorized access to the unit controls and prevents tampering with system settings.
Power Failure Recovery
Power interruptions are no problem for the XK series wired controller. All user selections and system parameters are stored in non-volatile memory. When power is returned, the system
will automatically return to the last operating mode.
Swing Louver Control
The XK series provides control over the motorized discharge air louver to optimize air distribution throughout the room.
Fahrenheit or Celsius Display
Whether you are more comfortable reading temperatures in Fahrenheit or Celsius, the
XK series can quickly be set up to display either one.
Diagnostic Center
The system has an on-board computer that continuously scans for unacceptable operating
conditions or malfunctions. If such conditions occur, the system takes corrective action or
stops. The fault or status codes will be shown on XK series wired tether controller display
to facilitate easy troubleshooting and repair.
89
Wired Tether Controller
DIMENSIONAL SPECIFICATIONS
A
C
B
B
TYPE
PART NUMBER
A
in (mm)
B
in (mm)
C
in (mm)
XK-41
MC207059
3.625 (92)
3.625 (92)
1.375 (35)
XK-19
MC207001140
3.625 (92)
3.625 (92)
1.375 (35)
SYSTEM WIRING DIAGRAM
90
INSTALLATION
The following is a brief XK-19 and XK-41 Wired Tether
Controller installation overview. See Wired Controller
Installation Manual for more detailed instructions on
installation, start-up, and setup.
Connecting Indoor Unit
Select a proper location on the wall for mounting
the Tether Controller. Install switch box, if required
by code. Locate the 26-ft communication cable that
came with the Tether Controller. Run communication
cable (as desired) between indoor unit and selected
wall mounting location. Locate the Tether Controller
connector in the control box area of the indoor unit.
Carefully connect communication cable to indoor unit.
Wired Tether Controller Installation
Pull communication cable through switch box (if
one is used) and Wired Tether Controller backplate.
Securely fasten backplate to the switch box or wall.
Carefully connect communication cable to rear of
Wired Tether Controller panel. Push extra cable into
wall and secure controller panel to backplate mounted
on the wall.
NOTE: Do not cut and splice communication cable.
Follow the start-up setup instructions supplied with
the Wired Tether Controller.
91
Limited Warranty Statement
Ductless Heat Pump Multi-Split Systems
Effective on new GREE Ductless purchases on or after March 1, 2013
MULTI18HP230V1AO
MULTI24HP230V1AO
MULTI30HP230V1AO
MULTI36HP230V1AO
MULTI42HP230V1AO
NEO09HP230V1AH
NEO12HP230V1AH
NEO18HP230V1AH
CAS12HP230V1AC
CAS18HP230V1AC
CAS24HP230V1AC
DUCT09HP230V1AD
DUCT12HP230V1AD
DUCT18HP230V1AD
DUCT24HP230V1AD
FLR09HP230V1AF
FLR12HP230V1AF
FLR18HP230V1AF
FLR24HP230V1AF
CONS09HP230V1AF
CONS12HP230V1AF
CONS18HP230V1AF
GREE distributor (hereinafter “Company”) warrants this product against failure due to defect in
materials or workmanship under normal use and maintenance as follows. All warranty periods
begin on the date of original installation. If the date cannot be verified, the warranty period begins
one hundred twenty (120) days from date of manufacture. If a part fails due to defect during the
applicable warranty period Company will provide a new or remanufactured part, at Company’s
option, to replace the failed defective part at no charge for the part. This limited warranty is
subject to all provisions, conditions, limitations and exclusions listed below.
• A warranty period of Seven (7) years on compressor to the original registered end user.
• A warranty period of Five (5) years on all parts to the original registered end user.
• A warranty period of One (1) year on the remote control provided with the original unit.
• Limited warranty applies only to systems that are properly installed by a state certified
or licensed HVAC contractor, under applicable local and state law in accordance with all
applicable building codes and permits; GREE installation and operation instructions and
good trade practices.
• Warranty applies only to products remaining in their original installation location.
• Defective parts must be returned to the distributor through a registered servicing dealer
for credit.
92
LIMITATIONS OF WARRANTIES
All implied warranties and/or conditions (including implied warranties or conditions of
merchantability and fitness for a particular use or purpose) are limited to the duration of this
limited warranty, some states or provinces do not allow limitations on how long an implied
warranty or condition lasts, so the above may not apply to you. The express warranties made
in this warranty are exclusive and may not be altered, enlarged, or changed by any distributor,
dealer, or other person, whatsoever.
THIS WARRANTY DOES NOT COVER:
1. Labor or other costs incurred for diagnosing, repairing, removing, installing, shipping, servicing
or handling of either defective parts, or replacement parts, or new units.
2. Product cleaning required prior to warranty service and repair.
3. Normal maintenance as outlined in the installation and servicing instructions or Owner’s
Manual, including filter cleaning and/or replacement and lubrication.
4. Failure, damage or repairs due to faulty installation, misapplication, abuse, improper servicing,
unauthorized alteration or improper operation.
5. Failure to start due to voltage conditions, blown fuses, open circuit breakers, or damages due
to the inadequacy or interruption of electrical service.
6. Failure or damage due to floods, winds, fires, lightning, accidents, corrosive environments
(rust, etc.) or other conditions beyond the control of the Company.
7. Failure or damage of coils or piping due to corrosion on installations within one (1) mile of
sea coast or corrosive body.
8. Parts not supplied or designated by Company, or damages resulting from their use.
9. Products installed outside continental USA and Canada.
10. Electricity or fuel costs, or increases in electricity or fuel costs for any reason whatsoever,
including additional or unusual use of supplemental electric heat.
11. Any cost to replace, refill or dispose of refrigerant, including the cost of refrigerant.
12. Shipping damage or damage as a result of transporting the unit.
13. Accessories such as condensate pumps, line sets and so forth are not covered.
14. Any special, indirect or consequential property or commercial damage of any nature whatsoever.
Some states or provinces do not allow the exclusion of incidental or consequential damages,
so the above limitation may not apply to you.
FOR WARRANTY SERVICE OR REPAIR:
Contact your installing contractor. You may find the installer’s name on the equipment or in
your Owner’s packet.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state or province to province.
WSO021513-DLSWARR-MULTI – Rev. 10-15-14
93
Specifications in this booklet are subject to change without notice.
Manufacturer reserves the right to discontinue or modify specifications or
designs without notice or without incurring obligations. All rights reserved.
Cat# +MULTI-3TPG Version: 3.0
© 2014 Gree Electric Appliance, Inc.
Download PDF

advertising