GE | AJEM12DCF | Quick Specs | GE AJEM12DCF Quick Specs

GE AJEM12DCF Quick Specs
AJEM12DCF
GE® 230/208 Volt Built-in Heat/Cool Room Air Conditioner
Premium, Deluxe and Value Model
Wall Case Dimensions (in inches)
Wall Case Dimensions and Installation Information (in inches)
Note: When installing slide-out chassis units in through-the-wall
applications, keep louvers free. Do not restrict air flow areas.
15-5/8
16-7/8
21-13/16
26
Perpendicular
230/208V
20 Amp
Note: When installing units in through-the-wall applicatio
Do not restrict air flow areas.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
geappliances.com or call GE Answer Center®
service, 800.626.2000.
AJEM12DCF
Total volume and shelf
area are calculated by
the Association of Home
Appliance Manufacturers’
standards.
Listed by
Underwriters
Laboratories
Specification Created 7/14
AJEM12DCF
Built-in
RAC
Installation
Built-in
RAC
Installation
®
GE 230/208
Volt
Built-in
Heat/Cool Room Air Conditioner
. 1-G003
pg.pg.
138)
April
30.1993
ub.
1-G003
138)
April
30.1993
Brick Block and Brick
Frame Construction
Fill open cells
with mortar
or insulation
Dimensions (in inches)
Installation
Information: A finished opening of 26-1/8" x
In
Room
AirAir
Conditioners
lt-In
Room
15-3/4" clear
ofConditioners
intrusions is required. Keep clearance of
Opening
for
RAB36/37/38
Case
4" from side
Brick veneer or
frame
walls should have
all Opening
forwalls.
RAB36/37/38
Case
Make
frame
if desired
or caulk
Make
frame
if desired
or caulk
between
case
and
siding
between case and siding
wood studding
surrounding
case toclear
provide
anchoring
hed opening
of 26-1/8"
x 15-3/4",
offirm
nished
opening
ofCase
26-1/8"
xfastened
15-3/4",
clear
of
with
screws.
can
be
directly
to
brick
or block
ons, is required.
Keep
clearance
of 4"
usions,
is required.
Keep
clearance
of from
4"
from
walls
with screws
sunk in
lead expansion
shields.
Brick
veneer
or frame
walls
should
have
ealls.
walls.
Brick
veneer
or
frame
walls
should
have
Note:
Units
should
be
caulked
on
all
four
sides
of case
studding
surrounding
case
to provide
firmfirm
od
studding
surrounding
case
to
provide
to
the
building
exterior
to
assure
building
integrity.
ring
with
screws.
Case
cancan
be be
fastened
directly
horing
with
screws.
Case
fastened
directly
Two
Wall
Cases
for
Tenant
Option
Installation
krick
or block
walls
with
screws
sunk
in lead
or When
block
walls
with
screws
sunk
in
lead
the air conditioner is offered as a tenant option, these
sion
shields.
ansion
shields.
wall cases provide protection against outside elements.
RAB47 – includes wall case, exterior grille
and steel closure panels.
RAB48 – includes wall case, exterior grille,
steel closure panel and two layers of insulation.
Standard Wall Case RAB46
Solid-sided wall case fabricated of galvanized steel with
baked enamel finish. Welded areas are coated with
a sealing compound to help resist rust and corrosion.
Polymer gasket surrounds opening to assure tight weather
seal. Aluminum grille (RAG13) is included. Panels on interior
and between case and grille provide weather protection prior
to installation of chassis. Provide firm anchoring with screws.
Case can be fastened directly to brick or block walls with
screws sunk in lead expansion shields.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
geappliances.com or call GE Answer Center®
service, 800.626.2000.
Plaster Line
Trim Molding
(if desired)
Lintel
15-3/4
15-3/4
26-1/8
26-1/8
OUTSIDE
INSIDE
16-7/8
Caulking
Drip Rail
Frame
Construction
Frame
Construction
Flexible Mounting Position
Lintel
Lintel
15-3/4
15-3/4
26-1/8
26-1/8
FillFill
open
cells
open
cells
with
mortar
with
mortar
Brick
Block
and
Brick
Brick
Block
and
Brick or insulation
or insulation
Frame
Construction
Frame
Construction
Plaster
Line
Plaster
Line
Trim
Molding
Trim
Molding
(if desired)
(if desired)
Lintel
Lintel
Total volume and shelf
area are calculated by
the Association of Home
Appliance Manufacturers’
standards.
Listed by
Underwriters
Laboratories
Specification Created 7/14
OUTSIDE
OUTSIDE
16-7/8
16-7/8
INSIDE
INSIDE
AJEM12DCF
GE® 230/208 Volt Built-in Heat/Cool Room Air Conditioner
Features and Benefits
• 12,000 / 11,800 cooling BTU
• 11,200 / 9,200 resistance heat BTU
• 9.7/9.7 EER
• 9.6/9.6 CEER
• 230 / 208 Volts
• R-410A refrigerant
• Electronic controls with remote
• Electronic digital thermostat control
• Four-way air direction
• Up-front, washable air filter
• 2 cooling / 2 heating / 2 fan only speeds
• 1240 / 1220 Watts heat
• Unit dimensions: 14-7/8"H x 24-13/16"W x 19-29/32"D
AJEM12DCF
• Model AJEM12DCF – Soft Gray
Specification Created 7/14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising