Cove | DW2450 | Design Guide | Cove DW2450 Design Guide

DISHWASHER
DESIGN GUIDE
REVISED 2 / 2018
TA B L E O F C O N T E N T S
3
COVE DISHWASHERS
4
OVERALL DIMENSIONS
5
OPENING DIMENSIONS
6
ELECTRICAL | PLUMBING
7
D O O R PA N E L
9
COVE WARRANTY
Features and specifications are subject to change at any
time without notice. Visit coveappliance.com/specs for the
most up-to-date information.
Throughout this guide, dimensions may vary by ± 1/8" (3).
Dimensions in parentheses are millimeters unless otherwise
specified.
C OVE DIS HWAS HE RS
Cove Dishwashers
Cove dishwashers clean to a higher standard. They are built
to ensure that every dish and utensil—including plastic
containers, heavy saucepans, wire whisks, and even delicate
china plates—emerge from the dishwasher spotlessly clean
and dry. With a vast array of custom wash and dry options
and interiors that adjust to accommodate any size or combination of dishes, Cove offers a clean you will never have
to second-guess. Both models can be fully integrated with
custom cabinetry or stainless steel panels to complement any
kitchen design.
D I S H WA S H ER M O D ELS
DW2450
DW2450WS
WATER SOFTENER
C OVE DIS HWAS HE RS
Overall Dimensions
D I S HWAS HER
23 5/8" (600)
23 1/4" (591)
34 1/2"
(876)*
*33 3/4" (857) MIN TO 34 5/8" (880) MAX
OPEN DOOR
26 3/4"
(679)
IMPORTANT NOTE: Overall dimensions do not include
panels or handles. Dimensions will vary with panel
thickness.
4
|
Cove Customer Care 800.222.7820
C OVE DIS HWAS HE RS
Opening Dimensions
O P EN I N G W I D TH
D I S HWAS HER
Cove dishwashers accommodate varying opening widths.
A 23 5/8" (60 cm) width provides minimum reveals and is ideal
for new construction. A 24" (610) width is also common;
however, reveals for a 24" (610) opening will be larger than
the reveals for a 23 5/8" (60 cm) opening unless the panel
width is adjusted accordingly. Refer to page 7 for more
information.
24" (610)
MIN OPENING
DEPTH
TOP VIEW
O PEN I N G H EI GH T
34 1/2"
23 5/8" (600)
OPENING WIDTH
(876)
OPENING
HEIGHT
Cove dishwashers accommodate varying opening heights.
A 34 1/2" (876) height is typical. The unit allows for 7/8" (22) of
total height adjustment. Refer to page 4 for more information.
O PEN I N G D EPTH
SIDE VIEW
FRONT VIEW
NOTE: 3 1/2" (89) finished returns will be visible and should be finished to match cabinetry.
3/4" (19)
3/4" (19)
TYPICAL
TYPICAL
3 1/2" (89)
3 1/2" (89)
FINISHED
RETURN
FINISHED
RETURN
23 5/8"
Allow for panel thickness when planning the finished
opening depth. Panels thicker than 3/4" (19) require additional depth if the unit is being installed flush. A minimum
3 1/2" (89) finished return is required on all sides of the
opening. Framed cabinets require additional finished filler
material behind the face frame for a proper installation.
Refer to the illustration.
FILLER
23 5/8"
(600)
(600)
FRAMELESS
CABINETRY
FRAMED
CABINETRY
coveappliance.com
|
5
C OVE DIS HWAS HE RS
Electrical
Plumbing
Installation must comply with all applicable electrical codes.
Installation must comply with all applicable plumbing codes.
Locate the electrical supply within reach of the power cord,
likely in an adjacent cabinet. Refer to the illustrations below.
A separate circuit servicing only this appliance is required. A
ground fault circuit interrupter (GFCI) outlet or breaker may
be required, whichever complies with local codes.
Locate the water supply and drain within reach of the water
and drain connections, likely in an adjacent cabinet. Route
the water supply through the shaded area shown in the
illustration below. Connect the water supply line to a hot
water house supply with an easily accessible shut-off valve
between the supply and the unit.
ELECTRICAL REQUIREMENTS
Electrical Supply
115 VAC, 60 Hz
Service
15 amp dedicated circuit
Receptacle
3-prong grounding-type
Power Cord
3' (.9 m)
BACK OF
OPENING
ELECTRICAL
LOCATION
IN ADJACENT
CABINET
E
2" (51)
6"
(152)
E
PLUMBING REQUIREMENTS
Water Connection
Drain Connection
Pressure
BACK OF
OPENING
2" (51)
6"
TOE KICK
TOE KICK
SIDE VIEW
SIDE VIEW
Electrical location
6
|
Electrical routing
Cove Customer Care 800.222.7820
5' (1.5 m) corrugated tubing
30–140 psi (2–9.7 bar)
(152)
FRONT VIEW
5' (1.5 m) braided tubing with
female compression fitting
3/8"
Water supply routing
C OVE DIS HWAS HE RS
Door Panel
C U S T O M PANEL
S TAI N LES S S TEEL PAN EL
IMPORTANT NOTE: The dishwasher opening width deter-
Stainless steel accessory door panels are available in
two widths to accommodate a 235/8" (60 cm) or a 24" (610)
opening. Panels are also available in two heights to
accommodate a 4" (102) or 6" (152) toe kick. Panels are
available through an authorized Cove dealer. Refer to the
chart below for panel dimensions. For local dealer information, use the showroom, sales, and service search tool on
coveappliance.com.
mines the custom panel width. The panel width should be
1/4" (6) less than the opening width to achieve minimum
reveals.
The panel dimensions in the chart below are based on a
34 1/2" (876) opening, with a 4" (102) toe kick and 1/8" (3) top
reveal. For all other opening and toe kick heights, adjust the
panel accordingly. The minimum panel height is 28" (711).
The minimum toe kick height is 4" (102).
Finish all sides of the custom panel. They may be visible
when the door is open.
4" (102) TOE KIC K
Locate the handle near the top of the door. Handle mounting
hardware must be flush with the back of the door panel.
PANEL DIMENSIONS
PANEL DIMENSIONS
23 5/8" (60 cm) Opening
24" (610) Opening
6" (152) TOE KIC K
23 5/8" (60 cm) Opening
24" (610) Opening
W
H
23 3/8" (594)
23 3/4" (603)
30 3/8" (772)
30 3/8" (772)
W
H
23 3/8" (594)
23 3/4" (603)
28 3/8" (721)
28 3/8" (721)
D
3/4"
(19)
3/4"
(19)
3/4"
(19)
3/4"
(19)
D
W
H
23 5/8" (60 cm) Opening
23 3/8" (594)
30 3/8" (772)
24" (610) Opening
23 3/4" (603)
30 3/8" (772)
S TA N D A R D H A N D LES
16 lb (7 kg)
Optional stainless steel tubular and pro handles are avail­
able through an authorized Cove dealer. For local dealer
information, use the showroom, sales, and service search
tool on coveappliance.com. Refer to the chart below for
standard handle lengths for the dishwasher.
PANEL REQUIREMENTS
Max Weight (including handle)
1/2"
Min Thickness
(13)
HANDLE LENGTH
Tubular
211/4" (540)
Pro
19 1/2" (495)
H
W
Panel dimensions
coveappliance.com
|
7
C OVE DIS HWAS HE RS
Door Panel
K I C KPLAT E CLEARANCE
K I C K P LATE
It is possible to adhere a decorative kickplate to the factory
kickplate. The height and thickness can vary, provided it
does not impede the door panel rotation. Refer to the illustration below.
The upper right corner of any kickplate exceeding 3 3/8" (29)
in height must be notched to allow for airflow. Refer to the
illustration below.
33 3/4"
(857)
MIN
PRODUCT
HEIGHT
3 1/8"
(79)
6"
4"
(152) (102)
3 3/8" (86)
FRONT VIEW
30 3/8" (772)
TYPICAL PANEL
HEIGHT
Kickplate notch
1 3/4" (44)
DEPTH
ADJUSTMENT
31/4"
(83)
2 3/4" (70)
KICKPLATE
HEIGHT
3 1/8" (79)
MAX DEPTH
FACTORY KICKPLATE
Toe kick area (side view)
Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowflake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf &
Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries.
All other trademarks are property of their respective owners in the United States and other countries.
8
|
Cove Customer Care 800.222.7820
Cove Appliance Residential Limited Warranty
FOR RESIDENTIAL USE
FULL FIVE YEAR WARRANTY*
For five years from the date of original installation, this Cove Appliance product warranty covers all parts
and labor to repair or replace, under normal residential use, any part of the product that proves to be
defective in materials or workmanship. All service provided by Cove Appliance under the above warranty
must be performed by Cove factory certified service, unless otherwise specified by Cove Appliance, Inc.
Service will be provided during normal business hours.
LIMITED LIFETIME WARRANTY
For the life of the product, Cove Appliance will repair or replace the following parts that prove to be defective in materials or workmanship: stainless steel tub and door liner (excludes surface corrosion, scratches,
discoloration, weather and atmospheric related staining and minor surface rust and oxidation). If the owner
uses Cove factory certified service, the service provider will repair or replace these parts with the owner
paying for all other costs, including labor. If the owner uses non-certified service, the owner must contact
Cove Appliance, Inc. (using the information below) to receive repaired or replacement parts. Cove Appliance
will not reimburse the owner for parts purchased from non-certified service or other sources.
TERMS APPLICABLE TO EACH WARRANTY
The warranty applies only to products installed for normal residential use. The warranty applies only to
products installed in any one of the fifty states of the United States, the District of Columbia or the ten
provinces of Canada. This warranty does not cover any parts or labor to correct any defect caused by
negligence, accident or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT COVE APPLIANCE,
INC. WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY WARRANTY ARISING BY OPERATION
OF LAW. COVE APPLIANCE, INC. WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER
EXPRESS, IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also
have other legal rights that vary from state to state.
To receive parts and/or service and the name of Cove factory certified service nearest you, contact Cove
Appliance, Inc., P.O. Box 44848, Madison, WI 53744; check the contact & support section of our website,
coveappliance.com, email us at customerservice@subzero.com or call 800-222-7820.
*Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited
60-day parts and labor warranty for cosmetic defects.
COVEAPPLIANCE.COM
Download PDF

advertising