Blomberg DWT55300SS Chart

Blomberg DWT55300SS Chart
EN
QUICK REFERENCE GUIDE
WARNING
Before using the dishwasher, read carefully and follow the safety instructions in the Use and Care Manual.
1 On/Off button
2 Half Load indicator led
3 Salt level indicator led *
4 Start/Pause/Cancel indicator led
5 Start/Pause/Cancel button
6 Time Delay button
7 Time Delay indicator led
8 Rinse aid level indicator led
9 Remaining Time Indicator/Delay Time Indicator
10 Tablet Detergent indicator
������
������
������
������
11 Program Indicator
12 Half Load/Combi Tablet button
13 Program Selection button
(* Model depending)
HOW TO USE YOUR DISHWASHER:
1. Open the door and load the dishwasher.
2. Check that both upper and lower spray arms move freely.
3. Pour correct amount of detergent into the detergent dispenser
and close the lid.
4. Push in the On/Off button 1 and check that the display lights
come on.
5. Check the rinse aid level indicator led. 8 If necessary, refill
rinse aid.
6. Check the salt level indicator led. 3 If necessary, refill salt.
(model depending)
7. Use the programme selection button 13 to choose your
washing programme.
- When there are few dishes, additionally use the Half load
button.
- Depending on the hardness level of the tap water, the
Tablet Detergent function allows better drying and washing
performance from the multi-purpose tablets.
8. Start the program with the Start/Pause/Cancel button 5.
9. Close the door and the program will start.
10. When the wash program has ended, an electronic beep will
sound and will continue every 10 seconds. After 2 minutes of
elapsed time the sound will stop. The beep can be stopped
also by opening the door or by pressing the On/Off buton 1.
11. Press the On/Off button 1 and open the door after the
program is completed. The indicator lights will go off.
12. Allow your dishes to cool for 15 minutes, with the door open.
13. Unload the dishes. Begin with the lower rack.
CAUTION
Avoid opening the door during the washing process. This
interrupts the washing process, and hot steam will escape.
Hot steam can cause burns and other serious injuries. When
the door is closed, the program will continue.
PROGRAM TABLE
Program number
Program name
Wash Temperatures
Rinse Temperatures
1
2
3
4 Reference*
5
Rinse & Hold
Quick Wash
China/Crystal
Regular Wash
Pots & Pans Plus
113
122
122
158
(°F)
(°C)
(°F)
-
(°C)
45
50
50
70
131
149
142 - 145
167
55
65
61 - 63
75
Degree of dirtiness
-
Few
Few
Medium
High
15 ml
-
+
-
-
-
15-25 ml
-
-
+
+
+
+ 5 ml
-
-
-
+
+
40
Detergent in
dispenser
section
ml
-
15-25
25
25-40
tsp
-
3-5
5
5-8
8
Medium ml
water
tsp
-
15
15-25
25
40
-
3
3-5
5
8
-
15
15
15-25
25-40
Hard
water
Recommended
detergent
amount
Soft
water
ml
tsp
-
3
3
3-5
5-8
Wash
▼
End
Main wash
▼
Rinse
▼
Final rinse
▼
End
Main wash
▼
Rinse
▼
Final rinse
▼
Dry
▼
End
Wash
▼
Main wash
▼
Rinse 1
▼
Rinse 2
▼
Final Rinse
▼
Dry
▼
End
Wash
▼
Main wash
▼
Rinse 1
▼
Rinse 2
▼
Final Rinse
▼
Dry
▼
End
Duration (minutes)
12
34
65
100 - 135
120
Water (gallons)
1,2
3,1
3,1
2,80 - 4,70
5,3
Water (liters)
4,4
11,8
11,8
10,6 - 17,8
20,2
Program process
The consumption values shown in the table were determined under standard conditions. For this reason, deviations are possible under practical conditions.
* The energy-usage label is based on this program.
EN
FUNCTION BUTTONS
1 On/Off button
2 Half Load indicator led
3 Salt level indicator led *
4 Start/Pause/Cancel indicator led
5 Start/Pause/Cancel button
6 Time Delay button
7 Time Delay indicator led
8 Rinse aid level indicator led
9 Remaining Time Indicator/Delay Time Indicator
10 Tablet Detergent indicator
������
������
������
������
11 Program Indicator
12 Half Load/Combi Tablet button
13 Program Selection button
(* Model depending)
ON/OFF BUTTON
Turn the dishwasher on with the On/Off button. When turning on,
the icon on the display module of the last used program will light up.
PROGRAM SELECTION BUTTON
Use the Program Selection button to select the desired program.
The icon of the corresponding program will light up.
Refer to “Table of Programme Data and Average Consumption
Values” to select a programme suitable for your dishes. Select the
desired programme with programme selection button.
WARNING
Depending on the length of the terminated program detergent
and rinse aid may still be in the dispensers.
Ingestion or inhalation of detergent or rinse aid may cause
serious injury. Avoid contact with skin and eyes, and keep
children and infirm persons away from these materials.
8 RINSE AID LEVEL INDICATOR LED
HALF LOAD/TABLET DETERGENT BUTTON
Half Load/Tablet Detergent Button allows you to turn on and off the
Half Load and Tablet Detergent functions of your machine.
START/PAUSE/CANCEL BUTTON
Use this button to start the selected program. When the button is
pressed once, the light on the button will turn on.
Stop the program with the Start/Pause/Cancel button.
������
������
����������������
REMAING TIME INDICATOR/DELAY TIME INDICATOR
You can follow the remaining program duration from the time
indicator display.
TIME DELAY BUTTON
This option enables you to start the selected program with a delay
of 0,5 to 9,5 hours.
1. Delay time is adjusted by pressing the Time Delay button (press
several times).
2. After adjusting the delay time, press the Start/Pause/Cancel
button.
3. Close the door. At the end of the delay set, the program starts
automatically.
���� ����������������������
����� ������������������
If this indicator light comes on, you
need to refill rinse aid.
You can also tell whether rinse
aid must be refilled by looking at
the rinse aid dispenser. When the
visual fill indicator is dark, there is
enough rinse aid in the dispenser.
When the color is light, open the
dispenser and refill rinse aid.
3 �����������������
SALT LEVEL INDICATOR LED
(MODEL DEPENDING)
Notice :
During a wash program the Time Delay option does not function.
PROGRAM CHANGE
To change the program selection while the dishwasher is running:
1. Open the door.
2. Press Start/Pause/Cancel and select a new program.
3. Press Start/Pause/Cancel again, to start.
������ � ����������������������
������������������
�����
� ����������������������
�������
� ��
����
����������������
� � ��
WARNING
Depending on the stage of the program you have cancelled,
there may be detergent residue or rinse aid inside the machine
and on the dishes. Make sure the items in the dishwasher are
not used before washing properly. Ingestion or inhalation of
detergent or rinse aid may cause serious injury. Avoid contact
with skin and eyes and keep children and infirm persons away
from these materials.
������
������
�� �
CANCELLATION OF A PROGRAM
To cancel a program while the dishwasher is running:
1. Open the door gently.
2. Press and hold Start/Pause/Cancel button for 3 seconds. The
indicator light will start flashing.
3. Close the door.
4. The dishwasher will drain the water inside the machine for 2
minutes. At the end of the cycle a beep will sound. You can choose
and start a new program.
When this indicator light comes on,
you must refill special salt. Only
use special dishwasher salt in your
machine to soften the water.
The salt content can be read on
the container for the salt. When the
visual fill indicator is dark, there is
enough salt in the container.
When the color is light, open the
container and add dishwasher salt.
CHANGING
WARNING SOUND VOLUME
������
���������
����������
Press
and hold
Half Load / Tablet Detergent key for 5 seconds until
��������� ���������
S:03 appears������������
on the display. Every time you press the Half Load /
Tablet Detergent key, the warning sound level will change as - - Off,
S:01 Low, S:02 Medium, and S:03 High. After selecting the sound
volume, wait for 10 seconds to save it. Factory setting of your
machine is S:03.
17 9093 01 00-BH
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement