Blomberg | DWT25200SSWS | Chart | Blomberg DWT25200SSWS Chart

EN
QUICK REFERENCE GUIDE
WARNING
Before using the dishwasher, read carefully and follow the safety instructions in the Use and Care Manual.
�
�
�
� ��
1
2
3
4
5
6
7
�� ��
�
�
�
�
��
�
�
��
On/Off button
Start/Pause/Cancel button
Display
Program Selection buton
Half Load/Combi Tablet button
Time Delay buton
Door Handle
14 Half Load/Combi Tablet indicator led
15 Program Steps Follow-up Indicator
a Washing Step Indicator “ ”
b Drying Step Indicator “ ”
c End of Program Indicator “ ”
(* Model depending)
8 Program Indicator
9 Salt level indicator led *
10 Rinse aid level indicator led
11 Remaining Time Indicator/Delay
Time Indicator
12 Start/Pause/Cancel indicator led
13 Time Delay indicator led
HOW TO USE YOUR DISHWASHER:
1. Open the door and load the dishwasher.
2. Check that both upper and lower spray arms move freely.
3. Pour correct amount of detergent into the detergent dispenser
and close the lid.
4. Push in the On/Off button 1 and check that the display lights
come on.
5. Check the rinse aid level indicator led. 10 If necessary, refill
rinse aid.
6. Check the salt level indicator led. 9 If necessary, refill salt.
(model depending)
7. Use the Program Selection button 4 to choose your washing
program.
- When there are few dishes, additionally use the Half Load
function.
- Depending on the hardness level of the tap water, the Tablet
Detergent function allows better drying and washing performance
from the multi-purpose tablets.
�
�
��
8. Start the program with the Start/Pause/Cancel button 2.
9. Close the door and the program will start.
10. The End of Program indicator 15 c lights up when the
program is over.
11. Press the On/Off button 1 and open the door after the program
is completed. The indicator lights will go off.
12. Allow your dishes to cool for 15 minutes, with the door open.
13. Unload the dishes. Begin with the lower rack.
CAUTION
Avoid opening the door during the washing process. This
interrupts the washing process, and hot steam will escape.
Hot steam can cause burns and other serious injuries. When
the door is closed, the program will continue.
PROGRAM TABLE
1
2
3
4 Reference*
5
Rinse & Hold
Quick Wash
China/Crystal
Regular Wash
Pots & Pans Plus
(°F)
113
122
122
158
(°C)
45
50
50
70
131
149
142 - 145
167
Program number
Program name
Wash Temperatures
Rinse Temperatures
(°F)
-
(°C)
55
65
61 - 63
75
Degree of dirtiness
-
Few
Few
Medium
High
15 ml
-
+
-
-
-
15-25 ml
-
-
+
+
+
+ 5 ml
-
-
-
+
+
Detergent in
dispenser
section
ml
-
15-25
25
25-40
40
tsp
-
3-5
5
5-8
8
Medium ml
water
tsp
-
15
15-25
25
40
-
3
3-5
5
8
ml
-
15
15
15-25
25-40
tsp
-
3
3
3-5
5-8
Wash
▼
End
Main wash
▼
Rinse
▼
Final rinse
▼
End
Main wash
▼
Rinse
▼
Final rinse
▼
Dry
▼
End
Wash
▼
Main wash
▼
Rinse 1
▼
Rinse 2
▼
Final Rinse
▼
Dry
▼
End
Wash
▼
Main wash
▼
Rinse 1
▼
Rinse 2
▼
Final Rinse
▼
Dry
▼
End
120
Hard
water
Recommended
detergent
amount
Soft
water
Program process
Duration (minutes)
12
34
65
100 - 135
Water (gallons)
1,2
3,1
3,1
3,43 - 5,34
5,3
Water (liters)
4,4
11,8
11,8
13,0 - 20,2
20,2
The consumption values shown in the table were determined under standard conditions. For this reason, deviations are possible under practical conditions.
* The energy-usage label is based on this program.
EN
FUNCTION BUTTONS
�
�
�
� ��
1
2
3
4
5
6
7
�
On/Off button
Start/Pause/Cancel button
Display
Program Selection buton
Half Load/Combi Tablet button
Time Delay buton
Door Handle
�� ��
�
�
�
�
��
��
�
PROGRAM SELECTION BUTTON
Use the Program Selection button to select the desired program.
The icon of the corresponding program will light up.
Refer to “Table of Programme Data and Average Consumption
Values” to select a programme suitable for your dishes. Select the
desired programme with programme selection button.
PROGRAM STEPS FOLLOW-UP
You can follow up the step while current program is running from
the Program Steps follow up indicator (15)
a Washing Step Indicator 15 a
b Drying Step Indicator 15 b
c End of Program Indicator 15 c
The display shows the steps for washing 15 a and drying 15 b,
respectively, while the selected program is running. Only the End
of Program indicator 15 c lights up when the program is over.
Remaining Time Indicator 3 displays “0:00”.
HALF LOAD/TABLET DETERGENT BUTTON
Half Load/Tablet Detergent Button allows you to turn on and off the
Half Load and Tablet Detergent functions of your machine.
�
14 Half Load/Combi Tablet indicator led
15 Program Steps Follow-up Indicator
a Washing Step Indicator “ ”
b Drying Step Indicator “ ”
c End of Program Indicator “ ”
(* Model depending)
8 Program Indicator
9 Salt level indicator led *
10 Rinse aid level indicator led
11 Remaining Time Indicator/Delay
Time Indicator
12 Start/Pause/Cancel indicator led
13 Time Delay indicator led
ON/OFF BUTTON
Turn the dishwasher on with the On/Off button. When turning on,
the icon on the display module of the last used program will light up.
�
��
WARNING
Depending on the stage of the program you have cancelled,
there may be detergent residue or rinse aid inside the machine
and on the dishes. Make sure the items in the dishwasher are
not used before washing properly. Ingestion or inhalation of
detergent or rinse aid may cause serious injury. Avoid contact
with skin and eyes and keep children and infirm persons away
from these materials.
PROGRAM CHANGE
To change the program selection while the dishwasher is running:
1. Open the door.
2. Press Start/Pause/Cancel and select a new program.
3. Press Start/Pause/Cancel again, to start.
WARNING
Depending on the length of the terminated program detergent
and rinse aid may still be in the dispensers.
Ingestion or inhalation of detergent or rinse aid may cause
serious injury. Avoid contact with skin and eyes, and keep
children and infirm persons away from these materials.
10 RINSE AID LEVEL INDICATOR LED
� ��
����������������
START/PAUSE/CANCEL BUTTON
Use this button to start the selected program. When the button is
pressed once, the light on the button will turn on.
Stop the program with the Start/Pause/Cancel button.
REMAING TIME INDICATOR/DELAY TIME INDICATOR
You can follow the remaining program duration from the time
indicator display.
9 SALT LEVEL INDICATOR LED (MODEL DEPENDING)
� ��
������ � ����������������������
����
������������������
�����
� ����������������������
�������
�� �
Notice :
During a wash program the Time Delay option does not function.
If this indicator light comes on, you need to refill rinse aid.
You can also tell whether rinse aid must�����������������
be refilled by looking at the
rinse aid dispenser. When the visual fill indicator is dark, there is
enough rinse aid in the dispenser.
When the color is light, open the dispenser and refill rinse aid.
� ��
TIME DELAY BUTTON
This option enables you to start the selected program with a delay
of 0,5 to 9,5 hours.
1. Delay time is adjusted by pressing the Time Delay button (press
several times).
2. After adjusting the delay time, press the Start/Pause/Cancel
button.
3. Close the door. At the end of the delay set, the program starts
automatically.
���� ����������������������
����� ������������������
� � ��
CANCELLATION OF A PROGRAM
To cancel a program while the dishwasher is running:
1. Open the door gently.
2. Press and hold Start/Pause/Cancel button for 3 seconds. The
indicator light will start flashing.
3. Close the door.
4. The dishwasher will drain the water inside the machine for 1
minute. At the end of the cycle, the end of program indicator will
light up. You can choose and start a new program.
����������������
When this indicator light comes on, you must refill special salt. Only
use special dishwasher salt in your machine to soften the water.
The salt content can be read on the container for the salt. When the
visual fill indicator is dark, there is enough salt in the container.
When the color is light, open the container and add dishwasher salt.
������
���������
����������
��������� ���������
������������
17 9129 01 00-AB
Download PDF

advertising