AccuCold | ALF620LBIIF | Installation Instructions Manual | AccuCold ALF620LBIIF Installation Instructions Manual

Instructions for
Integrated Frame
(Built-In Application)
Top Hinge
or
DETAIL A
Step 7
Step 8
Frame
Top Brace
Step 6
A
1) Remove Door from Chassis by unscrewing
3 screws in Top Hinge and 2 screws in Bottom
Hinge. Keep screws, discard hinges.
2) Attach customer supplied handle to Door Panel
using countersunk screws.
3) Screw Door panel to Frame using 14 screws.
4) Slide Frame over Refrigerator door and attach
with 1 screw on each side, center of door.
Step 4
5) Screw Bottom Pc to Door with 2 screws.
6) Attach Top Brace to Frame with 1 screw on side.
Attach Bottom Brace in the same manner.
Bottom
Pc
Door Panel
23 5/16" x 28 1/4" FF7
19 1/2" x 31 1/2" FF511
14 5/8" x 30" SCR1536B
SWC1535B
B
7) Drill a hole thru the Top and Bottom Frame using
the Braces as a guide with a 5/32" drill bit. Install
screws to finish attaching the Top and Bottom
Braces securely to the Frame.
8) Drill a hole into the Door Panel from the top and
bottom using the Braces as a guide with a 1/4"
drill bit. Do not exceed 5/8". This is the hole that
the door will pivot on.
9) Remount the door using the supplied Top and
Bottom Hinges.
DETAIL B
Summit Appliance
1-718-893-3900
Bottom Brace
Hinge FF7
or SCR1536B
SWC1535B
Hinge FF511
Download PDF

advertising