Liebherr | MF-1851 | Spec sheet | Liebherr MF-1851 Spec Sheet

18" Monolith Freezer
Product Dimensions
IMPORTANT!
Stated minimum height dimensions include
when the leveled feet are fully inserted.
MF 1851
Energy consumption (kWh / y)
430
Estimated Yearly Energy Cost in US $
52 *
Sound rating dB(A)
40 **
Freezer capacity cu.ft. (l)
7.8 (222)
Number of shelves
4
Number of door racks
3
Number of FrostSafe drawers
3
Electronic control
Freezer temperature range °F (°C)
InfinitySwipe
+7 °F to –17 °F ( –14 °C to –27 °C)
Defrost type
automatic
Interior light
InfinityLight
Water filter
IceMaker
Height can be increased by a maximum of
1" (26 mm) by turning the adjust­able feet.
When the appliance is fitted in the recess,
the appliance must be raised by turning the
adjustable feet so that the appliance top
has contact with the anti-tipping bracket.
This results in a 4" (102 mm) Toe Kick
height.
Continuous Toe Kick
Individual Toe Kick
fixed water connection
3.5 (1.6)
Ice cube stock lbs. (kg)
4.0 (1.8)
Door hinges
left, reversible ***
83 3/4" / 17 3/4" / 24"
in cm H / W / D
in inch H / W / D
in cm H / W / D
Net weight lbs. (kg)
Voltage V / Hz
84" / 18" / 24"
213.4 / 45.7 / 61
253.5 (115.0)
115 / 60
*Estimated energy cost will depend on utility rates and use. Estimated energy cost
based on a national average electricity cost of 12 cents per KWh.
** Noise output – according to EN 60704-3.
*** Please contact your Liebherr Authorized Dealer for door reversal.
Door Panel Dimensions
D
This surface is visible when the appliance door is open.
Designed finish is required.
18" recess
Available Accessories
Inset installation style
H = 79 7/8" (2029 mm)
W = 17 3/4" (451 mm)
· Stainless Steel door panel
· Monolith brushed aluminum square handle
· Monolith Stainless Steel round handle
· Monolith brushed aluminum soft-edge handle
Frameless installation style
H = 80" (2032 mm) Add overlapping
dimension to the panel on the top.
W =18" (457 mm) Add overlapping
dimension to the panel on both sides.
See pages 26–27 for available accessories.
Maximum panel weight = 52 lbs. (24 kg)
22
A
Cabinet depth frameless installation style = 24" (610 mm)
Cabinet depth inset installation style = 24" (610 mm) plus
panel thickness
C
The appliance has a recess in this area for cable and
waterline laying. 1" (25 mm) in depth and 5 1/2"
(140 mm) in height over the whole width of the appliance.
212.6 / 45 / 61
Cut out dimensions
18"
Dimension A = without
mounted door handle
B
This is the point where the power cord exits from the
appliance rear. 3/4" (19 mm) from the left and 5"
(127 mm) from the floor. Free length of the power cord
is 98" (2.5 m).
Product dimensions
in inch H / W / D
Frameless
A = 8 1/2" (216 mm)
B = 1/2" (12.5 mm)
C = 20 3/8" (517 mm)
Cut out Dimensions
yes
Ice cube output lbs. (kg) / 24h
Inset
A = 8 1/4" (210 mm)
B = 1/2" (12.5 mm)
C = 19 7/8" (505 mm)
23
Download PDF

advertising