Summit | SCF1076GDC | SCF1076 SCF1476manual.pdf | Summit SCF1076GDC SCF1076 SCF1476manual.pdf

COMMERCIAL
ICE CREAM FREEZERS
Models SCF1076 & SCF1476
Instruction Manual
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
Write Model No. and Serial No. (on rating
label) here:
Model No. ________________________
Serial No. _________________________
Felix Storch, Inc.
770 Garrison Avenue
Bronx, NY 10474
www.summitappliance.com
TABLE OF CONTENTS
Appliance Safety .........................................................................
3
Important Safeguards ................................................................
3-4
Location of Parts, Control Panel ...............................................
5
Technical Information ................................................................
6
Installation Instructions .............................................................
6-8
Moving and Installing Your Appliance ....................................
6
Attaching the Casters .............................................................
7
Electrical Connection ..............................................................
7-8
Extension Cord .......................................................................
8
Operating Your Appliance .........................................................
8-9
Turning On the Freezer ..........................................................
8
Storing Items in the Unit .........................................................
8-9
Defrosting the Unit ..................................................................
9
Lock and Keys .......................................................................
9
Normal Phenomena ................................................................
9
Care and Maintenance ...............................................................
9-10
Cleaning Your Appliance ........................................................
9-10
Power Failure .........................................................................
10
Vacation Time .........................................................................
10
Moving Your Appliance ..........................................................
10
Power Cord .............................................................................
10
Energy Saving Tips ................................................................
10
Troubleshooting .........................................................................
11
Limited Warranty ........................................................................
12
2
APPLIANCE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read
and obey all safety messages.
This is the Safety Alert Symbol. The symbol alerts you to potential hazards that
can kill or injure you and others. All safety messages will follow the Safety
Alert Symbol and either the words "DANGER" or "WARNING".
Danger means that failure to heed this safety
statement may result in severe personal injury or
death.
Warning means that failure to heed this safety
statement may result in extensive product
damage, serious personal injury, or death.
All safety messages will alert you about the potential hazard, tell you how to reduce the chance of injury,
and let you know what can happen if the instructions are not followed.
IMPORTANT SAFEGUARDS
Before the appliance is used, it must be properly positioned and installed as
described in this manual, so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the appliance, follow basic precautions,
including the following:

Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do
not use an extension cord.

Replace all panels before operating.

It is recommended that a separate circuit serving only your appliance be provided. Use receptacles
that cannot be turned off by a switch or pull chain.

Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion.
And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance. The fumes can create a fire hazard or explosion.

Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is
disconnected.
3

Do not connect or disconnect the electric plug when your hands are wet.

Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in
electrical shock or death.

Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in
this manual. All other servicing should be referred to a qualified technician.
FOLLOW WARNING CALLOUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

Use two or more people to move and install the appliance. Failure to do so can result in back or other
injury.

To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed.
Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This unit
must be installed in an area protected from the elements, such as wind, rain, water spray or drips.

The appliance should not be located next to ovens, grills or other sources of high heat.

The appliance must be installed with all electrical, water and drain connections in accordance with
state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances, is required.

Do not kink or pinch the power supply cord of the appliance.

The size of the fuse (or circuit breaker) should be 15 amperes.

It is important that the appliance be level in order to work properly. You may need to make several
adjustments to level it.

All installations must be in accordance with local plumbing code requirements.

Make certain that the pipes are not pinched, kinked or damaged during installation.

Check for leaks after connection.

To avoid deformation, never place hot or heavy items on top of the freezer.

Never allow children to operate, play with or crawl inside the appliance.

Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage
or discolor the interior.

Use this appliance only for its intended purpose as described in this Instruction Manual.

Keep fingers out of the “pinch point” areas. Clearances between the doors and between the doors
and cabinet are necessarily small. Be careful closing doors when children are in the area.
Risk of child entrapment!
Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are
still dangerous, even if they will “just sit in the garage a few days”.
Before discarding your old refrigerator:
 Take off the doors.
 Leave the shelves in place so that children may not easily climb inside.
- SAVE THESE INSTRUCTIONS 4
LOCATION OF PARTS
1. Handle
2. Flat sliding glass doors
3. Lock
4. Food basket
5. Drain hole
6. Control panel
7. Ventilation slots
8. Caster
9. Power cord
Control Panel
For ice cream storage, use settings 4 -6
Temperature Control Panel
Control
Panel
Setting
Temperature
of evaporator
(Fahrenheit)
Temperature
inside cabinet
(Fahrenheit)
Freeze/Refrigeration
status
OFF
Off
---
Off
1
42.8
46.4
Refrigeration
2
23
32
Refrigeration
3
-0.4
14
Refrigeration
4
-11.2
5
5
-18.4
-0.4
6
-40
-7.6
5
For ice cream
storage, use
settings 4 -6
5 is normal
operating setting
Freeze
TECHNICAL INFORMATION
Model
SCF1076
SCF1476
Installation
Free-standing
Free-standing
3
14.1 ft3
Capacity
10.6 ft
Electrical Input
115V AC 60Hz
115V AC 60Hz
Power Input
210W
205W
Rated Current
3.3A
2.05A
Refrigerant
R134a, 4.56 oz
R134a, 4.74 oz
Unit Weight
115 lbs
128 lbs
Unit Dimensions
42.5"W x 26.3"D x 30.7"H
53"W x 26.3"D x 30.7"H
NOTE: Specifications are subject to change without notice.
INSTALLATION INSTRUCTIONS
 This appliance is meant for free-standing installation; it should not be built-in.
 Do not store or install the appliance outdoors.
 This appliance is designed for the storage of frozen items. Do not use it to store
medicine or other medical products.
Moving and Installing Your Appliance
 When transporting, keep the unit vertical as much as possible. The angle between
the vertical and the side of the unit should never exceed 45° since this could affect
the compressor and result in abnormal operation. Never turn the unit upside down.
 After unpacking the unit, remove the packing materials and attach the casters (see
following section). Place the unit on a level and sturdy floor near a power socket.
 Leave at least 4" of space between the back and sides of the unit and the
surrounding walls for ventilation.
 Keep the unit away from heat sources and avoid direct sunlight.
 Never place the unit in a location with high humidity or where water can reach it.
 It is recommended that you install the appliance in a place where the ambient
temperature is between 72º and 78ºF (23º-26ºC). If the ambient temperature is
above or below the recommended temperatures, the performance of the unit may be
affected. For example, placing your unit in extreme cold or hot conditions may cause
interior temperatures to fluctuate.
6
Attaching the Casters
Machine bottom board
Screw
Caster
Screw
Caster
1. Slide the casters into the slots of the Machine bottom board.
2. Align the holes in the caster brackets with the holes in the Machine bottom board.
3. Fasten the screws in the diagonal holes for each caster (2 screws per caster).
Electrical Connection
Improper use of the grounded plug can result in the risk of electrical shock. If the
power cord is damaged, have it replaced by a qualified electrician or an
authorized service center.
Never ground the unit through a gas, heating, or tap water pipe or the grounded
wire of a single-phase power supply.
This appliance should be properly grounded for your safety. The power cord of this
appliance is equipped with a three-prong plug that mates with standard three-prong wall
outlets to minimize the possibility of electrical shock.
Do not under any circumstances cut or remove the third (ground) prong from the power
cord supplied. For personal safety, this appliance must be properly grounded.
This appliance requires a standard 115/120 Volt AC ~ 60Hz three-prong grounded
electrical outlet. Have the wall outlet and circuit checked by a qualified electrician to
make sure the outlet is properly grounded. When a standard 2-prong wall outlet is
encountered, it is your responsibility and obligation to have it replaced with a properly
grounded 3-prong wall outlet.
To prevent accidental injury, the cord should be secured behind the appliance and not
left exposed or dangling.
7
The appliance should always be plugged into an exclusive, properly grounded wall
outlet which has a voltage rating that matches the rating label on the appliance. This
provides the best performance and also prevents overloading wiring circuits that could
cause a fire hazard from overheating. Never unplug the appliance by pulling on the
power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair
or replace immediately all power cords that have become frayed or otherwise damaged.
Do not use a cord that shows cracks or abrasion damage along its length or at either
end. When moving the appliance, be careful not to damage the power cord.
Extension Cord
Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must
use an extension cord it is absolutely necessary that it be a UL/CUL-Listed, 3-wire
grounding type appliance extension cord having a grounding type plug and outlet and
that the electrical rating of the cord be 115 volts and at least 10 amperes.
OPERATING YOUR APPLIANCE
Turning On the Freezer
Connect the unit to a power supply (the POWER LED will turn on) and turn the Temperature Control to its highest setting, 6 (the RUN LED will also turn on). Be sure the
doors are closed. Allow the unit to run for about 12 hours before putting any food
inside. The temperature should be about -1°F. Turn the Temperature Control to the
normal operating setting. It may be necessary to adjust the setting depending on such
factors as amount of food loaded and ambient temperature. (The RUN LED remains lit
only while the compressor is operating.)
CAUTION
 If power is disconnected, do not try to restart the freezer within 5 minutes of the




power disconnect.
Do not make holes through the walls of the unit in order to mount other items.
Avoid splashing water on the unit.
Do not store medical or pharmaceutical products in the unit.
Keep the keys of the door lock out of the reach of children.
Storing Items in the Unit
 Try to avoid putting a large number of items into the unit at one time. Leave some
space around the items to allow an unimpeded flow of cold air.
 Do not overload the freezer. Fill it only to the Load Line marked on the inner cabinet.
 To lower energy consumption and prolong the life of the compressor, avoid putting
8
warm food into the unit. Only foods at room temperature or already frozen should be
put into the freezer.
 Never store any flammable, explosive or corrosive materials in or near the freezer.
 Beer and other beverages, fresh flowers, medicine and injectables should not be
placed in the freezer.
Defrosting the Unit
When the frost on the cabinet wall reaches a thickness of ¼ inch, defrost the freezer to
optimize the freezing operation.
Turn Temperature Control to the lowest setting (OFF) for 5-6 hours before defrosting.
Disconnect the power and remove the food from the freezer. Use the plastic frost
removal tool (included) to scrape the frost from the interior of the unit. Do not use sharp
or metallic tools for this purpose. Open the drain hole and place a pan below it.
After defrosting, wipe the walls and floor of the unit dry with a clean cloth, then close the
drain hole. Follow the instructions for Turning On the Freezer on page 8.
Lock and Keys
Your unit is provided with a lock and set of keys.
The keys are located inside the plastic bag that contains the Instruction Manual. Insert
the key into the lock and turn it clockwise to unlock the door. To lock the doors, do the
reverse operation, making sure the metal pin is engaged completely. Remove the key
and put it in a secure place for safekeeping, out of the reach of children.
Normal Phenomena
You may notice the following phenomena happening with your appliance. They are
normal and should not be a cause for alarm.
 If you hear a sound like water flowing, this is refrigerant flowing through the pipes.
 When freezer is running, the compressor and condenser feel warm, or even hot.
 Under conditions of high humidity, moisture forms on the outer cabinet or doors.
This can be wiped away with a clean, soft, dry cloth.
CARE AND MAINTENANCE
Cleaning Your Appliance
 Turn off the power, unplug the appliance, and remove all items inside.
 Wash the inside surfaces with a solution of warm water and baking soda (about 2
tablespoons of baking soda to a quart of water).
 Wash the baskets with a mild detergent solution.
 Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and
wipe dry with a clean soft cloth. Wring excess water out of the sponge or cloth when
9
 Use warm water to clean oil or fruit juice stains on the door gasket to retain its
elasticity. Putting a little talcum powder on the surface of the gasket will prolong its
service life.
 To avoid damaging the surfaces of the unit, do not use steel wool, a steel brush or
any abrasive material when cleaning.
 Failure to unplug the appliance during cleaning could result in electrical shock or
other personal injury.
 Young children and infirm persons should not operate the appliance without
supervision.
 Young children should be warned not to play with the appliance.
Power Failure
Most power failures are corrected within a few hours and should not affect the
temperature of your freezer if you minimize the number of times the doors are opened.
If the power is going to be off for a longer period of time, you need to take the proper
steps to protect the contents.
Vacation Time
 Short vacations: Leave freezer operating during vacations of less than three weeks.
 Long vacations: If the freezer will not be used for several months, remove all items
and turn off the appliance. Clean and dry the interior thoroughly. To prevent odor
and mold growth, leave the doors open slightly.
Moving Your Appliance
1.
2.
3.
4.
Remove all food items from the freezer.
Securely tape down the baskets and any other loose items inside the freezer.
Tape the doors shut.
Keep the freezer in its upright position during transportation. Also, protect the
outside with a blanket or similar covering.
Power Cord
If the power cord is damaged, it must be replaced by the manufacturer, its service agent
or a similarly qualified person in order to avoid an electrical hazard.
Energy Saving Tips
 The appliance should be located in the coolest area of the room, away from heat-
producing appliances and out of direct sunlight.
 Ensure that the unit is adequately ventilated. Never cover air vents.
 Do not keep the doors open any longer than necessary.
10
TROUBLESHOOTING
You can solve many common problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the servicer.
Troubleshooting Guide
PROBLEM
The unit does not
operate.
The internal temperature
is too low.
The internal temperature
is too high. Compressor
operates continuously.
Operation is too noisy.
POSSIBLE CAUSE
SOLUTION
Temperature control is set to OFF
Adjust temperature control.
Bad plug connection
Reconnect the plug to power
source.
Tripped circuit breaker or blown
fuse
Reset circuit breaker or replace
fuse.
Temperature control is set too
high.
Adjust temperature control.
Thermostat does not work.
Call our service department for
repair suggestions.
Temperature control is set too low.
Adjust temperature control.
Poor heat dissipation and
ventilation of condenser
Allow more space at back of
freezer. Be sure ventilation slots
are clear.
Too much warm food was put in at
one time.
Allow food to come to room
temperature before putting into
freezer.
Too much food stored at one time.
Reduce the quantity below the
Load Line.
Doors were opened frequently or
held open too long.
Decrease frequency and length of
time of door opening.
Thick frost
Defrost.
Freezer is too near a source of
heat.
Relocate the unit.
The appliance is not level.
Level or relocate the appliance.
Pipes near the compressor are
touching.
Carefully separate the touching
pipes.
The freezer is too close to a wall
or cabinet.
Move the unit away from the
adjacent surface.
If the freezer develops problems that cannot be solved by referring to the chart above,
do not try to dismantle the unit yourself. This could void your warranty. Instead, refer
to an authorized service center or call SUMMIT Customer Service at 1-800-932-4267.
11
LIMITED WARRANTY
ONE-YEAR LIMITED WARRANTY
Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and
maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified
parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated
service company. Outside the 48 states, all parts are warranted for one year from manufacturing defects. Plastic
parts, shelves and cabinets are warranted to be manufactured to commercially acceptable standards, and are not
covered from damage during handling or breakage.
5-YEAR COMPRESSOR WARRANTY
1. The compressor is covered for 5 years.
2. Replacement does not include labor.
ITEMS WARRANTOR WILL NOT PAY FOR:
1. Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to replace or
repair fuses or to correct wiring or plumbing.
2. Service calls to repair or replace appliance light bulbs or broken shelves. Consumable parts (such as filters) are
excluded from warranty coverage.
3. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation,
installation not in accordance with electrical or plumbing codes, or use of products not approved by warrantor.
4. Replacement parts or repair labor costs for units operated outside the United States.
5. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
6. Expenses for travel and transportation for product service in remote locations.
7. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in
accordance with published installation instructions.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT
REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR. WARRANTOR SHALL NOT BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE
OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
WARNING! This product may contain chemicals known to the state of California
to cause cancer or birth defects or other reproductive harm. For more information,
visit: www.summitappliance.com/prop65
Chemicals known by the manufacturer to be present in this product in concentrations
higher than threshold limits: NONE.
FELIX STORCH, INC.
770 Garrison Avenue
Bronx, NY 10474
Phone: (718) 893-3900
Fax: (718) 842-3093
www.summitappliance.com
For parts and accessory ordering,
troubleshooting and helpful hints, visit:
www.summitappliance.com/support
Printed in China
12
Download PDF

advertising