Liebherr | UPR51 | Installation guide | Liebherr UPR51 Installation Guide

Liebherr UPR51 Installation Guide
Instructions
for use and
installation
Undercounter refrigerator, pull-out
drawers
UPR 513
060418 7086656 - 00
The appliance at a glance
Contents
1
1.1
1.2
1.3
1.4
1.5
1.6
The appliance at a glance.............................
Additional benefits............................................
Overview of the appliance and accessories.....
Range of appliance use....................................
Conformity........................................................
Product information..........................................
Energy saving...................................................
2
2
2
3
3
3
3
2
General safety information...........................
4
3
3.1
3.2
Controls and displays...................................
Operating and control elements.......................
Temperature display.........................................
5
5
5
4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
Start-up...........................................................
Transporting the appliance...............................
Setting up the device........................................
Installation........................................................
Adjust the fit of the door seal............................
Disposal of packaging......................................
Connecting the appliance.................................
Switch on the device........................................
5
5
6
6
12
14
14
15
5
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
5.10
5.11
Operation........................................................
Temperature display unit..................................
Child-proof lock................................................
Door alarm.......................................................
Sabbath Mode..................................................
Refrigerating food.............................................
Setting the temperature....................................
SuperCool........................................................
Egg tray............................................................
Moving the supporting bars..............................
Dividing the vegetable drawer..........................
Storing in the lift-up box....................................
15
15
15
15
15
16
16
17
17
17
17
18
6
6.1
6.2
6.3
6.4
Maintenance...................................................
Thawing...........................................................
Cleaning the appliance.....................................
Customer service.............................................
Appliance Information......................................
18
18
18
19
19
7
Troubleshooting............................................. 19
8
8.1
8.2
8.3
Putting appliance out of service..................
Vacation Tips....................................................
Switching the device off....................................
Decommissioning ............................................
9
Disposing of the appliance........................... 22
10
Liebherr Warranty Plan................................. 22
ance which is manufactured in an environmentally friendly
process with the use of recyclable materials.
We hope you enjoy your new appliance.
The manufacturer is constantly working to improve all
models. Therefore please understand that we reserve the
right to make design, equipment and technical modifications.
To get to know all the benefits of your new appliance,
please read the information contained in these instructions carefully.
The instructions apply to several models, so there may be
differences. Sections which only apply to certain appliances are indicated with an asterisk (*).
Instructions for action are marked with a , the
results of action are marked with a .
1 The appliance at a glance
1.1 Additional benefits
-
Large refrigeration capacity
Bright LED interior light
Integrated transport grips on appliance housing
Easy to clean
This appliance has a Sabbath Mode function, which
makes it possible to use the appliance on religious holidays. Further information can be found on the Star-K
website www.star-k.org.
1.2 Overview of the appliance and
accessories
Note
u Arrange food as shown in the picture. This arrangement
allows the appliance to work more efficiently, thus
saving energy.
u Shelves, drawers, and baskets are arranged for optimal
energy efficiency in the factory configuration.
22
22
22
22
Congratulations on the purchase of your new appliance.
With this purchase, you have chosen all the advantages of
the latest refrigeration technology, guaranteeing you a
high-quality appliance with a long life span and high operating safety.
The equipment of your appliance gives you the highest
level of day-to-day ease of operation.
Together we are making an active contribution to the
conservation of our environment by purchasing this appli2
* Depending on model and options
The appliance at a glance
Incorrect appliance use can cause damage to
the stored products or cause them to spoil.
Climate ratings
The appliance is set to operate within specific
ambient temperature limits according to its
climate rating The climate rating for your appliance is printed on the rating plate
Note
uTo guarantee trouble-free operation, comply
with the indicated ambient temperatures.
Fig. 1
(1)
(2)
(3)
(4)
Control panel
(7) Bottle shelf
Interior light
(8) Adjustable door
Pull-out rack
(9) Rating plate
Adjustable supporting (10)Adjustable plinth panel
bars
(5) Pull-out rack, coldest (11)Front and rear adjusting
zone
feet
(6) Lift-up box
1.3 Range of appliance use
Normal use
The appliance is only suitable for cooling food for
residential or other similar environments. This
includes the following types of uses
- in staff kitchens, bed and breakfasts,
- by guests in country homes, hotels, motels
and other types of accommodations,
- for catering and similar wholesale services.
The appliance is suitable for integrated under
worktop use
All other types of uses are not permitted.
Foreseeable misuse
The following uses are specifically prohibited:
- Storage and cooling of medication, blood
plasma, laboratory preparations or similar
substances and products in accordance with
the CMDCAS and FDA 510(k)
- Use outdoors.
- Use in moist areas exposed to the rain.
- Use in areas at risk of explosion
* Depending on model and options
Climate
rating
for ambient temperatures from
SN
50 °F (10 °C) to 90 °F (32 °C)
N
61 °F (16 °C) to 90 °F (32 °C)
ST
61 °F (16 °C) to 101 °F (38 °C)
T
61 °F (16 °C) to 110 °F (43 °C)
1.4 Conformity
The refrigerant circuit has been tested for leaks. When
installed, the appliance complies with the relevant safety
regulations and the safety standards CAN/CSA-C22.2 No.
60335-1-11, 60335-2-24-06 and UL 60335-1, UL
60335-2-24.
1.5 Product information
Product information is enclosed with the device in accordance with (EU) Ordinance 2017/1369. The complete
product information sheet is available on the Liebherr
website in the download area.
1.6 Energy saving
- Always ensure good ventilation. Do not obstruct ventilation openings or grilles.
- Never block air slits in the fan.
- Do not install the appliance in direct sunlight or next to
an oven, heater, or similar heat source.
- Energy consumption depends on installation conditions
such as the ambient temperature (see 1.3) . If the
ambient temperature differs from the standard temperature of 25 °C, energy consumption can change.
- Avoid opening the appliance door for any longer then
necessary
- The lower the temperature is set the higher the energy
consumption.
- All food stored in the appliance should be well wrapped
and covered. This prevents frost buildup.
- Only take food out for as long as necessary so that it
does not get too warm.
- Insertion of warm foods: first let the food cool down to
room temperature.
3
General safety information
2 General safety information
Read and follow these instructions. They contain
safety advice which is important for safe and
problem-free installation and operation. Always
read and follow the safety advice.
Dangers for the user:
- This appliance can be operated by children as
well as by persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they are supervised or
have been instructed in the safe use of the
appliance and understand the associated
risks. Children must not play with the appliance. Cleaning and user maintenance must
not be performed by children unless they are
supervised. Children between the ages of 3
and 8 may load and unload the appliance.
Children under the age of 3 must be kept away
from the appliance if they are not constantly
supervised.
- When disconnecting the appliance from the
outlet, always take hold of the plug. Do not pull
on the cable.
- Disconnect the power plug or switch off the
power if a fault occurs.
- Do not damage the mains power line. Do not
operate the appliance from a defective mains
power line.
- Repairs, work on the appliance and replacement of the mains cable should only be carried
out by the customer service department or
other specifically trained specialist engineers.
- Only install, connect and dispose of the appliance in accordance with the instructions.
- Only operate the appliance after it has been
installed.
- Please keep the instructions and pass them on
to any future owner.
- Special-purpose lamps inside the appliance
are intended to illuminate its interior compartments and are unsuitable for room illumination.
Risk of fire:
- The refrigerant contained within the appliance,
R 600a, is environmentally friendly, but flammable. Leaking refrigerant can ignite.
• Do not damage the pipes of the refrigerant
circuit.
• Do not handle naked flames or ignition
sources inside the appliance.
4
• Do not use electrical devices inside the
appliance (e.g. steam cleaners, heaters, ice
cream makers, etc.).
• If refrigerant leaks: Remove naked flames or
ignition sources located near the area of the
leak. Air the room well. Contact the
customer service department.
- Do not operate the appliance near explosive
gases.
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this
appliance.
- Do not store explosive materials or spray cans
with flammable propellants, such as e.g.
butane, propane, pentane, etc. in the appliance. You can recognize such spray cans by
the printed contents or a flame symbol. Any
leaking gasses can be ignited by electrical
components.
- Alcoholic beverages or other containers
holding alcohol must always be tightly sealed
for storage purposes. Any leaking alcohol can
be ignited by electrical components
Tipover hazard:
- Do not stand or climb on the base, drawers,
doors, etc. This applies in particular to children.
Risk of food poisoning:
- Do not consume food that has passed its best
before date.
Danger of frostbite, feelings of numbness
and pain:
- Avoid continued skin contact with the cold
surfaces or chilled/frozen food or adopt protective measures, e. g. use gloves. Do not
consume ice cream (especially sherbets) and
ice cubes immediately when they are too cold.
Risk of injury and damage:
- Hot steam may lead to injuries. Do not use any
electrical heating or steam cleaning equipment, naked flames or defrosting sprays for
defrosting
- Do not remove ice with sharp objects
Risk of crushing:
- Do not hold onto the hinge when opening and
closing the door. Fingers may get caught.
California Proposition 65
* Depending on model and options
Controls and displays
- This product contains chemicals known to the
3 Controls and displays
state of California to cause cancer or reproductive harm.
3.1 Operating and control elements
- This product can expose you to chemicals
including Diisononyl Phthalate (DINP) which is
known to the State of California to cause
cancer. For more information go to
www.P65Warnings.ca.gov.
- This product can expose you to chemicals
including Di-isodecyl Phthalate (DIDP) which
is known to the State of California to cause
birth defects or other reproductive harm. For
more information go to www.P65Warnings.ca.gov.
Symbols on the device:
The symbol can be on the compressor. It refers to
the oil in the compressor and refers to the following
danger: Can be lethal if swallowed or inhaled. This
notice only applies for recycling. There is no danger
during normal operation.
Follow the specific instructions in the other
sections:
DANGER
indicates a hazardous situation,
which if not avoided, will result in
death or serious injury.
WARNING
indicates a hazardous situation,
which if not avoided, could result in
death or serious injury.
CAUTION
indicates a hazardous situation,
which if not avoided, will result in
minor or moderate injury.
NOTICE
indicates a hazardous situation,
which if not avoided, could result in
damage to property.
Note
Fig. 2
(1)
(2)
(3)
(4)
(5)
(6)
(7)
On/Off button
SuperCool button
Up button
Down button
Alarm button
DEMO mode display
Temperature display
(8) Fahrenheit display
(9) Child safety symbol
(10)Sabbath mode symbol
(11)MENU symbol
(12)SuperCool symbol
(13)Alarm symbol
(14)Celsius display
3.2 Temperature display
The following is displayed in normal operation:
- the average cooling temperature
The following displays indicate malfunction. Possible
causes and corrective actions: (see Troubleshooting).
- F0 to F9
4 Start-up
4.1 Transporting the appliance
indicates useful advice and tips.
CAUTION
Risk of injury or damage if incorrectly transported.
u Transport the appliance in its packaging.
u Transport the appliance upright.
u Do not move the appliance on your own.
* Depending on model and options
5
Start-up
4.2 Setting up the device
WARNING
Risk of fire due to short circuit.
If the power cable or plug of the appliance or another
appliance and the back of the appliance touch each other
the power cable or plug will be damaged by the vibrations
of the appliance which could lead to a short circuit.
u Install the appliance so that it does not touch any plugs
or power cables.
u Do not connect the appliance or other appliances to the
sockets on the back of the appliance.
WARNING
Risk of fire due to moisture!
If live parts or the power cord get wet, this can cause a
short circuit.
u The appliance is designed for use in enclosed spaces.
Do not operate the appliance in open space or in damp
areas or where there is spray.
u Only operate the appliance after it has been installed.
WARNING
Risk of fire due to refrigerant.
The refrigerant contained within the appliance, R 600a, is
environmentally friendly, but flammable. Leaking refrigerant can ignite.
u Do not damage the pipes of the refrigerant circuit.
WARNING
Danger of fire and damage!
u Do not place devices that give off heat, e.g. microwaves, toasters, etc. on the appliance.
NOTICE
Risk of damage caused by condensation
Installing the appliance next to any other refrigerator or
freezer can cause condensation or damage to the Liebherr appliance.
u Do not install this appliance next to any other refrigerator or freezer except another Liebherr model. Liebherr
models are designed to allow side-by-side installation.
They are equipped with a heating system to eliminate
condensation when refrigerators or freezers are
installed side-by-side.
NOTICE
Risk of damage for the finished floor surface!
u Protect the finished floor surface before you uncrate the
unit.
WARNING
Danger of damage from overheating. May restrict operation.
u Keep ventilation openings, in the appliance enclosure
or in the built-in structure, clear of obstruction.
WARNING
Danger of tilting.
u To avoid a hazard due to instability of the appliance, it
must be fixed in accordance with the instructions.
q If possible, have a professional install the appliance in
your kitchen cabinet unit.
q If the appliance is damaged check with the supplier
immediately before connecting it.
q The floor of the installation site must be horizontal and
level.
q Do not install the appliance in direct sunlight or next to
an oven, heater or similar heat source.
q Do not install the appliance on your own. It is better to
do this with two or more people.
q The more R 600a refrigerant is in the appliance, the
larger the room must be where the device is located. In
the case of a leak, a flammable gas-air mixture may be
created in a room that is too small. In accordance with
standard EN 378, for every 0.39 oz (11 g) R 600a
coolant, the installation space must be at least35.5 ft3
(1 m3). The amount of refrigerant in your appliance is
indicated on the identification plate inside the appliance.
q If the appliance is installed in a very damp environment
condensate water may form on the outside of the appliance. Always ensure good ventilation.
q The load-bearing capacity of the floor must be sufficient
for the weight of the appliance plus about 1200 pounds
(544 kg) of food weight.
u Note down the type (model, number), appliance name,
appliance or serial number, date of purchase and
manufacturer's address in the place provided for this in
the Use & Care Manual.
u Remove all materials that could prevent it from being
installed properly or prevent proper ventilation from the
back or the side panels of the appliance.
After installation:
u Remove protective films, adhesive tapes and transport
safety devices, etc.
Note
u Clean the appliance (see operating instructions,
"Cleaning the appliance" section).
4.3 Installation
All fasteners are supplied with the appliance.
6
* Depending on model and options
Start-up
Fig. 3
Make sure you have the following tools on hand:
q Cordless screwdriver Torx® 15, 25
q Hex wrench 13
q Torx® 15 screwdriver
q Slot screwdriver 6
q Allen key 8
q Tape measure
q Pencil
q String
q Spirit level
Ventilation requirements
Fig. 4
WARNING
Risk of fire due to short circuit!
u When inserting the appliance into the recess do not
squash, jam or damage the power cable.
u Do not operate the appliance with a faulty power cable.
NOTICE
Risk of damage caused by water condensate!
u For Side-by-Side installation, freezer and refrigerator
side by side, always install the freezer on the right side
of the refrigerator (seen from the front). No condensate
forms between the appliances thanks to the side wall
heating system foamed in on the left.
Make sure the electrical sockets can be accessed.
Check the installation dimensions
* Depending on model and options
Fig. 5
There must be a ventilation gap of at least 200 cm².
If there is not enough ventilation, the appliance will
consume more energy.
7
Start-up
u Remove the mains cable from the back of the
appliance. Also remove the cable holder, otherwise there will be vibration noise!
u Position the mains cable using
a piece of string so that the
appliance can easily be
connected to the electricity
supply after it has been built-in
Fig. 8
Fig. 6
Fix the foam element centrally in the appliance plinth
trim.
The foam element is used to separate the incoming and
outgoing air currents and permits sufficient ventilation.
Weight of the unit door
NOTICE
Risk of damage to delicate floors!
u Place a strip of cardboard under the height-adjustable
feet, approx. 4 in.x24 in. ( 10 cm x 60 cm ), one at either
side. Cut the strips out of the packaging. If the recess
heights are smaller than ( 826 mm ) cut the strips out of
a firm but thin material.
u After the appliance has been slid in, remove the strips.
Note
u Before assembling the unit door, make sure that the
permitted weight for the unit doors is not exceeded
u Otherwise damage to the telescopic rails and malfunctions arising from this cannot be ruled out.
Model
Maximum weight of
unit door
S/UIKo
22.05 lbs (10 kg)
Side fastening
q Installation below hard worktops such as granite.
q With the adjusting feet completely screwed out, the
appliance is lower than the counter top.
q Requirement: Cabinet side panel for the screw connection.
Top fastening
q When the adjusting feet are screwed out completely,
the appliance sits slightly tensioned below the worktop.
q No granite top.
4.3.1 Assembling the appliance
Fig. 9
With a 23-5/8 '' (600 mm) wide recess: Do not use strips.
With a 24-1/32 '' (610 mm) wide recess: Place the strips
on the side.
- The appliance is to the right of the adjacent cabinet: Fit
the strip to the left.
- The appliance is to the left of the adjacent cabinet: Fit
the strip to the right.
u Place the strip under the top edge and stick it to the
side panel. The strip must not be shortened.
Top fastening
Fig. 7
u If the appliance plinth trim is already installed, remove it
from the front.
8
* Depending on model and options
Start-up
Fig. 10
u Insert the bracket in the opening in the top of the appliance and turn it forward.
u Push the appliance into the recess and align it, see
Aligning the appliance.
Side fastening:
Fig. 11
u Turn both brackets prior to assembly on one end. Insert
the straight side in the opening in the top of the appliance and turn it forward.
u Push the appliance into the recess and align it, see
Aligning the appliance.
Aligning the appliance
Fig. 12
u Unscrew the rear adjusting feet with a screwdriver and
the front adjusting feet with an Allen key 8 in an alternating manner until they are below the worktop.
u Align the appliance vertically, using a spirit level.
w The distance between the front edge of the unit side
wall and the appliance itself is 1-5/8 '' (41.5 mm) on
both sides.
w If there is no cabinet side panel, align it with the work
top.
In units with door stop components (knobs,
sealing lips, etc.)
u Subtract the additional distance (for depth of the door
stop components) from the 1-5/8 '' (41.5 mm) insertion
depth.
u Unscrew the rear adjusting feet with a screwdriver and
the front adjusting feet with an Allen key 8 (for screwed
in adjusting feet) or screwdriver (with unscrewed
adjusting feet) in an alternating manner as far as
possible. The maximum adjustment distance is 2-3/8 ''
(60 mm).
w The appliance is aligned vertically
w The appliance is blocked slightly in the recess between
the floor and the worktop.
Fig. 13
u Insert the foam element in the appliance plinth trim functionally important for separate air currents!
* Depending on model and options
9
Start-up
u Position the unit door and unit plinth trim for testing
u If the plinth trim (2) is visible, pull it forward as far as
possible so that the front edge of the ventilation grid
and the unit plinth trim lie flush.
-oru If the plinth trim (2) is covered, push it fully back.
u Make sure the ventilation slots are completely unobstructed: If necessary, crop the height of the unit plinth
trim (U)!
w Adjust the height of the rack (V) below the appliance
plinth trim (2) along the width of the recess (W).
Fig. 14
u Push the supplied stainless steel cover trim together
and place it on the white appliance plinth trim.
Fig. 17
u To position and fix the appliance plinth trim: Keep a
steady grip on the appliance plinth trim and insert the
latch.
u Fix the unit plinth trim.
To secure the appliance in the recess
Fig. 15
u With the supplied plugs, fasten the cover trim on the
right and left on the appliance plinth trim.
Fig. 18
u To fasten the appliance below the worktop, fasten the
mounting brackets with two screws each below the
worktop.
Fig. 16
u Position the appliance plinth trim (2) but do not fix it yet.
10
* Depending on model and options
Start-up
Fig. 21
Fig. 19
u For side fastening, fasten the mounting bracket with a
screw on the right and on the left in the recess.
u Hang the crosspiece Fig. 21 (11) on the inside of the unit
door using the fitting aids Fig. 21 (12).
With a 23-5/8 '' (600 mm) wide recess:
u Align the crosspiece Fig. 21 (11) to the middle of the
door.
4.3.2 Installing the unit door
u Installing the handle on the unit door
Note
To guarantee that the pull-out compartment will pull-out
evenly:
u Always install the unit handle in the middle of the unit
door.
Fig. 22
With a 24-1/32 '' (610 mm) wide recess:
u Align the crosspiece Fig. 22 (11) to the middle of the
door.
u Left strip: Move the crosspiece Fig. 22 (11)1/4 (6 mm) to
the left.
-oru Right strip: Move the crosspiece Fig. 22 (11)1/4 (6 mm)
to the right.
Fig. 20
u Check the 5/16 '' (8 mm) presetting. (Distance between
appliance door and lower edge of crosspiece)
u Raise the fitting aids Fig. 20 (12) to unit door height.
Bottom stop edge of ▲the fitting aid = top edge of the
unit door to be fitted.
u Unscrew the crosspiece Fig. 20 (11) by undoing the
locknuts Fig. 20 (10).
For chipboard doors
u Secure the crosspiece Fig. 21 (11) with at least 6 screws
Fig. 21 (19).
For frame and panel doors
u Secure the crosspiece Fig. 21 (11) with 4 screws
Fig. 21 (19) at the edge.
u Lift up fitting aids Fig. 21 (12), turn round and insert into
the adjacent openings.
Fig. 23
* Depending on model and options
11
Start-up
u Attach the unit door on the adjusting bolts Fig. 23 (13)
and loosely screw locknuts Fig. 23 (10) onto the
adjusting bolts.
u Close the door.
u Check the gap between the door and the surrounding
unit doors
u To laterally align the unit door Move the unit door in the
X direction.
u To align the unit door in the Y direction (height) and in
lateral inclination: Adjust the adjusting bolts Fig. 23 (13)
with a screwdriver.
w The unit door is flush and in alignment with the
surrounding unit fronts
u Tighten the locknuts Fig. 23 (10).
Fig. 26
u Check the fit of the door and re-adjust, if necessary
u Tighten all screws
u Tighten the locknuts Fig. 26 (10) with a hex wrench 13,
while counter-holding the adjusting bolts Fig. 26 (13)
with a screwdriver.
Fig. 24
u Screwing the unit door to the appliance door.
u Drill pilot holes in the door of the unit (you could make a
preliminary hole with a bradawl)
u Screw the appliance door to the unit door with screws
through the mounting brackets.
Fig. 27
u Position the upper cover and snap it into place.
Check the following points to make sure the appliance is
installed correctly Otherwise, icing up, the formation of
condensate, and malfunctions can occur
w The door must close properly
w The unit door must not touch the body of the unit
4.4 Adjust the fit of the door seal
It may be necessary to adjust the appliance door
depending on the weight of the unit door.
After assembling the unit door, check that the door seal is
fully fit up against the appliance body.
Fig. 25
u Align the unit door in depth Z : loosen the upper and
lower screws on the door, then move the door.
u Do not allow the knobs and
sealing lips to contact the door important for function
u Set an air gap of 3/32 '' (2 mm)
between the unit door and the
body of the unit.
Fig. 28
12
* Depending on model and options
Start-up
The adjustment settings are located to the right and left
below the bottle shelf on the inner door.
The appliance is delivered with the adjustment setting in
the 0 position.
The following settings are possible:
q Inclination ± 1°
q Upward adjustment of 4 mm
q Downward adjustment of 2 mm
q 2 mm adjustment to the left or right
NOTICE
Functional impairments and risk of damage!
u Only use the appliance door adjustment to ensure that
the door seal of the pull-out compartment lies 100% up
against the appliance body and not to adjust the unit
door.
If necessary, place a luminous flashlight inside to check
the tight closure of the door.
4.4.1 Adjusting the inclination of the door
Fig. 30
u Fully unscrew the screws Fig. 30 (34).
w Dispose of the screws Fig. 30 (34) as they will no longer
be needed.
u Only loosen the screws Fig. 30 (34) with 1 to 2 turns.
u Turn the adjusting screw Fig. 30 (35). In a clockwise
direction: the top of the door tilts away from the appliance body. In an anticlockwise direction: the top of the
door tilts towards the appliance and the bottom tilts
away from the appliance body.
u After adjusting the inclination, retighten all screws
Fig. 30 (34).
4.4.2 Leveling the door
Note
u Always perform the adjustment on both the right and
left side!
Fig. 29
Note
u Always perform the adjustment on both the right and
left side!
u Lift up the vegetable drawer
* Depending on model and options
13
Start-up
The packaging is made from recyclable materials:
- Corrugated card/cardboard
- Parts made of foamed polystyrene
- Films and bags from polyethylene
- Packing bands from polypropylene
- Wood frame nailed together with a polyethylene
window*
u Take the packaging material to an official collection
point.
4.6 Connecting the appliance
Fig. 31
Height adjustment, Y:
u Fully screw out the screws Fig. 31 (36).
w Dispose of the screws Fig. 31 (36) as they will no longer
be needed.
u Only loosen the screws Fig. 31 (37) with 1 to 2 turns.
u Turn the adjusting screw (38). In a clockwise direction:
the door moves max. 4 mm upwards. In an anticlockwise direction: the door moves max. 2 mm downwards.
u Retighten all screws Fig. 31 (37).
Lateral adjustment, X:
u If the screws Fig. 31 (36) are still present, unscrew them
fully.
u Only loosen the screws Fig. 31 (37) with 1 to 2 turns.
u Adjust the adjusting screws Fig. 31 (39) according to the
desired lateral adjustment direction.
u Retighten the screws Fig. 31 (37) after the lateral adjustment is complete.
u Reinsert the bottle shelf Fig. 29 (32) and the vegetable
drawer Fig. 29 (31).
Note
Make sure that the vegetable drawer is correctly inserted
and has engaged.
Otherwise, the door will not close properly.
u Insert the vegetable drawer flush with the inner door.
4.5 Disposal of packaging
WARNING
Danger of suffocation from packaging materials and films!
u Do not allow children to play with packaging materials.
14
WARNING
Electrical shock hazard!
u Start-up should only take place once the appliance has
been installed according to these instructions.
u Electrically ground appliance.
u Do not ground to a gas pipe.
u Check with a qualified electrician if you are not sure the
appliance is properly grounded.
u Do not have a fuse in the neutral or grounding circuit.
u Do not use an extension cord, power bar or a multiple
socket adapter.
u Do not use a power cord that is frayed or damaged.
WARNING
Electrical shock hazard!
This appliance is equipped with a three-prong (grounding)
polarized plug for your protection against possible shock
hazards. Electrical Grounding Required.
u Do not remove the round grounding prong from the
plug.
u Use only an grounded adapter.
- Wait 1 hour after installation before you plug in the
appliance. This allows the refrigerant and system lubrication to reach equilibrium.
- Make sure incoming voltage is the same as the appliance rating. A 110-120 Volt, 60 Hz, 15 Amp electrical
supply (20 Amp for side-by-side installations) circuit
that is controlled by a circuit breaker or fuse is required.
- We recommend using a dedicated circuit for this appliance to prevent electrical overload.
- Follow all Federal, State and local electrical, fire and
building codes and ordinances when installing the
receptacle and / or the appliance.
- In some communities, a wall switch is required to turn
power to the appliance ON and OFF.
- To reduce the risk of fire, electric shock, or personal
injury, installation work and electrical wiring must be
done by a qualified electrician in accordance with all
applicable codes and standards, including fire-rated
construction.
- The Power Plug must be easily accessible so that the
appliance can be disconnected from the mains quickly
in an emergency. It must not be behind the back of the
appliance.
* Depending on model and options
Operation
- The top of the electric outlet must be located within
82-5/8 in. (2100 mm) from the top of the base in the
cabinet.
4.7 Switch on the device
u Open the door.
u Press the On/Off button Fig. 2 (1).
w The temperature display lights up. The appliance is switched on.
w If “DEMO” appears on the display, 'demonstration mode' is activated. Contact Customer
Service.
5 Operation
5.1 Temperature display unit
The temperature display can be changed from °F to °C.
When c1 is shown on the display:
u To switch on the child proof lock, press
the SuperCool button Fig. 2 (2) briefly.
w The Child safety symbol Fig. 2 (9) lights up. c flashes on
the display.
When c0 is shown on the display:
u To switch the child proof lock off, press the SuperCool
button Fig. 2 (2) briefly.
w The Child safety symbol Fig. 2 (9) goes out. c flashes on
the display.
u To deactivate setting mode: Press the On/Off button
Fig. 2 (1).
-oru Wait 5 min.
w The temperature is again displayed on the temperature
display.
5.1.1 To change the unit
5.3 Door alarm
u To activate setting mode: Press and hold the SuperCool button Fig. 2 (2) for approx. 5 s.
w The Menu symbol Fig. 2 (11) lights up.
w S is displayed in the temperature display.
u Using Up button Fig. 2 (3)/ Down button
Fig. 2 (4) select °.
u To confirm: Briefly press the SuperCool button
Fig. 2 (2).
u Using Up button Fig. 2 (3)/ Down button
Fig. 2 (4) select °F or °C.
u To confirm: Briefly press the SuperCool button
Fig. 2 (2).
u To exit setting mode: Press On/Off button Fig. 2 (1).
-oru Wait 5 minutes.
If the door is open for longer than 180 seconds,
the acoustic warning sounds.
The acoustic warning stops automatically when
the door is closed
w The temperature is again displayed in the temperature
display.
5.2 Child-proof lock
You can use the child-proof lock to lock the
buttons. This means that children cannot accidentally switch off the appliance when playing.
5.2.1 Switching on the child proof lock
u Select setting mode: Press and hold the SuperCool
button Fig. 2 (2) for approx. 5 seconds.
w S will appear on the display.
w The Menu symbol Fig. 2 (11) lights up.
u Using the Up Fig. 2 (3) or Down button Fig. 2 (4), select
c.
u Press the SuperCool button Fig. 2 (2) briefly to confirm.
* Depending on model and options
5.3.1 Switching off the door alarm
The acoustic warning can be switched off when the door
is open. The acoustic warning remains switched off as
long as the door is open. When the door is closed, the
alarm function is active again.
u Press Alarm button Fig. 2 (5).
w The door alarm stops.
5.4 Sabbath Mode
This function meets the religious requirements on the
Sabbath and Jewish festivals. When the appliance is in
Sabbath mode some control electronic functions are
switched off. After setting Sabbath mode you no longer
need to worry about indicator lights, figures, symbols,
displays, alarm messages and fans. The thawing cycle
only operates at the specified time without taking refrigerator use into account. After a power cut the appliance
automatically switches on again in Sabbath mode.
You can find a list of Star-K-certified appliances at
www.star-k.org/appliances .
15
Operation
WARNING
Danger of food poisoning!
No record will be kept of a power failure during Sabbath
Mode. Thus, during Sabbath mode, if a power failure
occurs that you are not aware of, when the power comes
back on, the unit will continue to be in Sabbath Mode but
when Sabbath Mode is ended there will be no indication
that a power failure occurred.
If a power failure occurs during Sabbath mode:
u Check the quality of the food. Do not consume spoiled
food!
- All functions are blocked until Sabbath mode is
switched off.
- If the unit is currently running in a mode such as Superfrost, Supercool or the Ventilation is enabled these
functions will continue and finish their timed cycles
independent of now being in Sabbath mode.
- No audible signals are emitted, and the temperature
display does not indicate any warnings or settings
(such as a temperature alarm or door alarm).
- Light does not operate.
5.4.1 Setting Sabbath mode
u To activate setting mode: Press and hold the SuperCool button Fig. 2 (2) for approx. 5 s.
w S flashes on the display.
w The Menu symbol Fig. 2 (11) lights up.
u To access the Sabbath mode function: Briefly press the
SuperCool button Fig. 2 (2).
w S flashes on the display.
When S1 is shown on the display:
To
turn on Sabbath mode, briefly press
u
the SuperCool button Fig. 2 (2).
When S0 is shown on the display:
u To turn off Sabbath mode, briefly press
the SuperCool button Fig. 2 (2).
u To deactivate setting mode: Press the On/Off button
Fig. 2 (1).
-oru Wait 5 min.
w The Sabbath Mode symbol Fig. 2 (10) appears on the
temperature display as long as Sabbath Mode is active.
w Sabbath mode switches off automatically after 120
hours if it is not manually switched off beforehand.
5.5 Refrigerating food
It is coldest directly above the vegetable drawers and at
the rear wall. The warmest areas are located in the top
front section and in the door.
16
Note
u Load the pull out drawer with the bottle rack and vegetable
drawer
with
no
more
than
20 Umrechnung von kg wurde noch nicht definiert!
(20 kg )of food.
WARNING
Danger of fire
u Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the
type recommended by the manufacturer.
Note
Insufficient ventilation results in an increase in energy
consumption and reduction of the refrigerating performance.
u Never block the air slits in the fan.
u Store perishable food such as ready-meals, meat and
sausage products and in the middle of the coldest
zone. Store butter and preserves in the top part. (see
The appliance at a glance)
u Use recyclable plastic, metal, aluminum and glass
containers and cling film to wrap foods.
u Always use closed containers for liquids and for food
that may give off or be tainted by odor or flavor transfer
or cover them.
u Do not store food too close together to enable sufficient
air circulation.
5.6 Setting the temperature
The temperature depends on the following factors:
- the number of times the door is opened
- the room temperature of the installation location
- the type, temperature and amount of food.
The temperature is continuously adjustable across a
range of 36 °F (2 °C) to 49 °F (9 °C), and the advisable
range is 39 °F (4 °C).
u To set a higher temperature: press the Up button
Fig. 2 (3).
u To set a lower temperature: press the Down button
Fig. 2 (4).
w When pressed once the previously set temperature
display value will flash.
u To change the temperature in 1 °F (1 °C) increments:
briefly press the button.
u To change the temperature continuously: hold the
button down.
w The value is displayed flashing during the setting operation.
w The actual temperature is displayed about 5 seconds
after the last press of a button. The temperature slowly
adjusts to the new value.
* Depending on model and options
Operation
5.7 SuperCool
5.9 Moving the supporting bars
With SuperCool you switch to the highest cooling
performance to reach lower cooling temperatures. Use SuperCool to rapidly cool large quantities of food.
If SuperCool has been switched on the appliance runs at
maximum refrigerating capacity. As a result the noises
from the refrigeration unit may temporarily be louder.
SuperCool will use more energy than normal operation.
CAUTION
Danger of lacerations!
The storage shelf can shatter if dropped or mishandled.
You could cut yourself on the pieces of broken glass.
u Only remove storage shelves when there is nothing on
them.
5.7.1 Cooling with SuperCool
u Briefly press the SuperCool button Fig. 2 (2).
w The SuperCool symbol Fig. 2 (12) lights up in the
display.
w The cooling temperature drops to the coldest value.
SuperCool is switched on.
w SuperCool switches itself off automatically after 12
hours. The appliance continues to work in normal
energy-saving mode.
5.7.2 To prematurely switch off SuperCool
u Briefly press the SuperCool button Fig. 2 (2).
w The SuperCool symbol Fig. 2 (12) goes out in the
display.
w SuperCool is switched off.
Fig. 32
u Grasp the right and left supporting bars and carefully
remove them from above and then insert them in the
new position until the mounts engage.
5.10 Dividing the vegetable drawer
5.8 Egg tray
You can take out and rotate the egg tray. You can use the
two parts of the egg tray to mark different use-by dates, for
example.
Fig. 33
u Use the top part to store e.g. chickens' eggs.
u Use the bottom part to store quails' eggs.
* Depending on model and options
u The partition can be used to divide the vegetable
drawer. Insert the partition on the guide racks or simply
pull them out from the top.
17
Maintenance
5.11 Storing in the lift-up box
u Unopened and securely closed bottles and packages
can be stored in the lift-up box.
NOTICE
Incorrect cleaning damages the appliance.
u Do not use concentrated cleaning agents.
u Do not use steel wool or sponges that scour or scratch.
u Do not use caustic or abrasive cleaning materials or
those containing sand, chloride, or acids.
u Do not use chemical solvents.
u Do not damage or remove the rating plate on the inside
of the appliance. It is vital for the customer service
department.
u Do not pull off, kink or damage any cables or other
components.
u Do not let cleaning water get into the drain gutter, the
ventilation grille and electrical parts.
u Use soft cleaning cloths and a multi-purpose cleaning
agent with a neutral pH value.
u Only use food-compatible cleaning and care agents
inside the appliance.
Note
u Do not load the lift-up box with more than 4kg.
u Empty the appliance.
u Disconnect the power plug.
6 Maintenance
u Clean the plastic surfaces, outside and inside, by
hand using lukewarm water and a little dish washing
liquid.
u To clean the drain
opening:
Remove
deposits with a thin
instrument, e.g. a
cotton bud.
Fig. 34
6.1 Thawing
6.1.1 Defrosting the refrigerator
WARNING
Risk of injury and damage
u Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.
u Do not use any electrical heating or steam cleaning
equipment, naked flames or defrosting sprays for
defrosting.
u Do not remove ice with sharp objects.
u Do not damage the pipes of the refrigerant circuit.
The fridge compartment defrosts automatically. The
defrosted water will evaporate. Drops of water on the back
wall are a functional feature; this is completely normal.
u Clean the drain opening regularly so that the condensation water can drain away. (see 6.2)
Fig. 35
6.2 Cleaning the appliance
u To remove the rack: lift up at the back as in the picture
and pull out forwards.
WARNING
Risk of injury or damage due to hot steam.
Hot steam can cause scalding/burns and damage to
surfaces.
u Do not use steam cleaners.
Note
u If the storage compartment can no longer be pulled out
as far as it could initially, pull the telescopic rails out
fully once. The ball bearing cage on the telescopic rails
will then re-align and it will be possible to pull the
compartment out fully again.
u Clean the telescopic rails with a damp cloth only. The
grease in the tracks is for lubrication purposes and
should not be removed.
18
* Depending on model and options
Troubleshooting.
u Notify a qualified service provider, specifying the fault,
appliance designation Fig. 36 (1), service no. Fig. 36 (2)
and serial Fig. 36 (3) no.
w This will help us to provide you with a faster and more
accurate service.
u Keep the appliance closed until the Customer Service
engineer arrives.
w The food will stay cool longer.
u Disconnect the power plug (do not pull on the power
cord to do this) or switch off the fuse.
6.4 Appliance Information
u To dismantle the rack:lift the supporting bars upward,
pull out the retainers. The front and rear supporting
bars, as well as the glass base are free.
u To insert the rack: Push the telescopic rails in.
u Put the storage compartment on the telescopic rails
and push backwards until it clicks into place.
After cleaning:
u Wipe the appliance and accessories dry.
u Connect the appliance and switch it on again.
Make a note of this information when the appliance is
installed:
Type Designation:
_____________________
Service Number:
_____________________
Appliance / Serial Number:
_____________________
Date of purchase:
_____________________
Where purchased:
_____________________
6.3 Customer service
7 Troubleshooting.
First check whether you can remedy the fault yourself
(see Troubleshooting). If this is not the case, please
contact a qualified service provider.
Your appliance is designed and manufactured for reliable
operation and a long lifespan. If a malfunction nonetheless occurs during operation, please determine if the
malfunction is due to an operating error. If a service call
determines operator error, you will be charged for the
costs incurred, even during the warranty period. You may
be able to rectify the following problems yourself:
WARNING
Risk of injury from repairs by non-professionals.
u Repairs and work on the appliance and the power
supply cable not described in the Manual (see Maintenance) should only be carried out by a qualified service
provider.
u Read the appliance
designation
Fig. 36 (1), service no.
Fig. 36 (2) and serial
no. Fig. 36 (3) from
the rating plate. The
rating plate is located
inside the appliance
on the left-hand side.
Fig. 36
Problem
Possible Cause
Correction
The appliance
does not work.
The appliance is not switched on.
u Switch on the appliance.
The power plug is not properly u Check the power plug.
inserted in the wall socket.
The fuse in the wall socket is not OK. u Check the fuse.
* Depending on model and options
19
Troubleshooting.
Problem
Possible Cause
Correction
Power failure
u Keep the appliance closed.
u Protect the food: place dry ice on top of the food or
use an alternate freezer, if the power failure persists
for some time.
u Do not re-freeze defrosted food.
The compressor When less refrigeration is required, u This is normal in energy-saving models.
the speed-controlled compressor
runs for a long
switches to a low speed. Although
time.
the running time is increased as a
result, energy is saved.
SuperCool function is activated.
There is a fault.
An LED at the
lower rear of the
appliance (near
the compressor)
flashes regularly
every 5
seconds*.
u The compressor runs long to rapidly cool food. This
is normal.
u Contact the customer service department (see Maintenance).
Noises are too
loud.
The different speed levels of speed- u These noises are normal.
controlled* compressors can cause
them to generate various noises
during operation.
A gurgling
sound
This sound comes from the refrig- u The sound is normal.
erant flowing in the refrigeration
circuit.
A faint clicking
sound
The sound always occurs when the u The sound is normal.
refrigeration unit (the motor) automatically switches on or off.
A hum. It is
briefly a little
louder when the
refrigeration unit
(the motor)
switches on.
The refrigeration increases automati- The ambient temperature is too high.
cally when the SuperCool function is
activated, fresh food has just been
placed in the appliance or the door
has been left open for a while.
Vibration noise
The appliance is not standing firmly u Check the installation and realign the appliance if
on the floor. As a result, objects and
necessary.
adjoining units are set into vibration u Move bottles and containers apart.
by the running refrigeration unit.
The ambient temperature is too high. u Solution: (see 1.3)
The temperature There is a fault.
display indicates: F0 to F9.
u Contact the customer service department (see Maintenance).
DEMO lights up
in the temperature display.
The demo mode is activated.
The outside
surfaces of the
The heat of the refrigerant circuit is u This is normal.
used to prevent condensate from
forming.
20
u Contact the customer service department (see Maintenance).
* Depending on model and options
Troubleshooting.
Problem
appliance are
hot*.
Possible Cause
Correction
The temperature The door of the appliance is not u Close the appliance door.
closed properly.
is not cold
enough.
Insufficient ventilation.
u Clear and clean the ventilation grille.
The ambient temperature is too high. u Solution: (see 1.3)
The appliance was opened too u Wait to see whether the required temperature resets
frequently or for too long.
itself by itself. If not, contact the customer service
department (see Maintenance).
The appliance is too near to a heat u Change location of appliance or the heat source.
source (stove, heater etc).
The appliance was not properly u Make sure the appliance was installed correctly and
installed in the recess.
the door closes properly.
u Switch on the appliance.
The interior light The appliance is not switched on.
does not turn
The door was open for longer than 15 u The interior light automatically switches itself off if
on.
min.
the door remains open for approx. 15 min.
The LED interior light is faulty or the
cover is damaged:
WARNING
Risk of injury from electrical shock.
Live parts are under the cover.
u The LED interior light should only be replaced or
repaired by the Customer Service department or by
engineers trained to do so.
WARNING
Risk of injury from LED lamp!
The lighting intensity of the LED light complies with laser
class 1/1M.
If the cover is faulty:
u Do not gaze directly at this lighting unit with optical
lenses while very close to the light source. This can
cause damage to your eyes.
The door seal is
defective or
should be
replaced for
other reasons.
The door seal is interchangeable. u Contact the customer service department (see MainYou can replace it without the use of
tenance):
any special tools.
The appliance is The door seal may have slipped out u Check the door seal is well placed in the groove.
of its groove.
iced up or
condensation is
building.
* Depending on model and options
21
Putting appliance out of service
8 Putting appliance out of
service
8.1 Vacation Tips
Long vacations: If you will be away for a month or more
u Remove all food from the appliance.
u Turn OFF the appliance.
u Clean the appliance (see 6.2) .
u Leave the door open to prevent unpleasant odors.
w This will also keep mold from building up.
8.2 Switching the device off
u Press and hold the On/Off button Fig. 2 (1) until the
display becomes dark. Release the button.
w If the appliance cannot be switched off, the Child Safety
function is still activated (see 5.2) .
8.3 Decommissioning
u Empty the appliance.
u Switch off the appliance (see Putting appliance out of
service).
u Pull out the power plug.
u Clean the appliance (see 6.2) .
u Leave the door open to prevent bad smells.
9 Disposing of the appliance
Follow the local regulations for the disposal of appliances.
Old appliances can be dangerous. Contact the local
refuse collection department for additional information.
DANGER
There is a risk of suffocation.
Children playing can shut themselves in and suffocate.
u Take the door(s) off.
u Remove the drawers.
u Leave the storage shelves in the appliance so that children cannot easily climb into the appliance.
WARNING
Danger of electric shock.
u Cut off the plug from the power cord and discard.
u Cut off the power cord from the discarded appliance.
Dispose of separately from the appliance.
Ensure during and after disposal that the appliance isn't
stored in the vicinity of gasoline or other flammable vapors
and liquids.
22
When disposing of the appliance, ensure that the refrigeration circuit is not damaged to prevent uncontrolled
escape of the refrigerant it contains (data on type plate)
and oil.
10 Liebherr Warranty Plan
FULL TWO YEAR WARRANTY - For two years from the
date of original purchase, your Liebherr warranty covers
all parts and labor to repair or replace any part of the
product which proves to be defective in materials or workmanship.
FULL FIVE YEAR WARRANTY - For five years from the
date of original purchase, your Liebherr warranty covers
all parts and labor to repair or replace any components
that prove to be defective in materials or workmanship in
the sealed system. The “Sealed System” means only the
compressor, condenser, evaporator, drier and all
connecting tubing.
LIMITED 6TH THROUGH 12TH YEAR WARRANTY From the 6th through 12th year from the date of original
purchase, your Liebherr warranty covers all parts that
prove to be defective in materials or workmanship in the
Sealed System (parts only).
TERMS APPLICABLE TO EACH WARRANTY
All service provided by Liebherr under the warranty must
be performed by authorized Liebherr service representatives, unless otherwise specified by Liebherr. Service will
be provided in the home during normal business hours.
This warranty applies only to products installed for normal
residential use. Details regarding a non-residential
warranty are available on request.
The warranty applies only to products installed in any one
of the fifty states of the United States or the District of
Columbia. The warranty does not cover any parts or labor
to correct any defect caused by negligence, accident or
improper use, maintenance, installation, service or repair,
including but not limited to improper removal and reinstallation of the condensing unit.
THE WARRANTIES DESCRIBED ABOVE ARE MADE
EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, AND OF ANY OTHER
OBLIGATION OR LIABILITY ON THE PART OF LIEBHERR. IN NO EVENT SHALL LIEBHERR BE LIABLE
FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING FROM THE BREACH OF THESE
WARRANTIES OR ANY OTHER WARRANTIES,
WHETHER EXPRESS, IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of
incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty gives
you specific legal rights and you may also have other legal
rights which very from state to state.
To receive parts and/or service and the name of the Liebherr authorized service representative nearest you,
* Depending on model and options
Liebherr Warranty Plan
contact your Liebherr dealer or distributor or contact the
Liebherr designated national service provider:
in the US: Service-appliances.us@liebherr.com or call
1-866-LIEBHER (1-866-543-2437).
in Canada: www.euro-parts.ca or call 1-888-LIEBHER
(1-888-543-2437).
* Depending on model and options
23
For Service in the U.S.:
Liebherr Service Center
Toll Free: 1-866-LIEBHER or 1-866-543-2437
Service-appliances.us@liebherr.com
PlusOne Solutions, Inc.
3501 Quadrangle Blvd, Suite 120
Orlando, FL 32817
For Service in Canada:
Liebherr Service Center
Toll Free: 1-888-LIEBHER or 1-888-543-2437
www.euro-parts.ca
EURO-PARTS CANADA
39822 Belgrave Road
Belgrave, Ontario, N0G 1E0
Phone: (519) 357-3320
Fax: (519) 357-1326
www.liebherr-appliances.com
Part No. 7086656 - 00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising