U-Line U-2224WCINT-60A, U-1224RGLINT-00A, U-1024RS-00A, U1224KEGRSOD00A, U-1215WCINT-60A Quick start guide

U-Line U-2224WCINT-60A, U-1224RGLINT-00A, U-1024RS-00A, U1224KEGRSOD00A, U-1215WCINT-60A Quick start guide
QUICK START GUIDE
1000 Series
•
115 V / 60 Hz
QUICK START GUIDE
u-line.com
WELCOME TO U-LINE
Congratulations on your U-Line purchase. Your product comes from a company with over five decades and three generations
of premium modular ice making, refrigeration, and wine preservation experience. U-Line continues to be the American
leader, delivering versatility and flexibility for multiple applications including residential, light commercial, outdoor and
marine use. U-Line’s complete product collection includes modular Wine Captain® Models, Beverage Centers, Clear Ice
Machines, Crescent Ice Makers, Glass & Solid Door Refrigerators, Drawer Models, Freezers, and Combo® Models.
U-Line has captivated those with an appreciation for the finer things with exceptional functionality, style, inspired innovations
and attention to even the smallest details. We are known and respected for our unwavering dedication to product design,
quality and selection. U-Line is headquartered in Milwaukee, Wisconsin and has shipped product to five continents for over
two decades and is proud to have the opportunity to ship to you.
PRODUCT INFORMATION
Looking for additional information on your product? User Guides, Quick Reference Guides, CAD Drawings, Compliance
Documentation, and Product Warranty information are all available for reference and download at u-line.com.
PROPERTY DAMAGE / INJURY CONCERNS
In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following
steps:
1. U-Line Customer Care must be contacted immediately at +1.800.779.2547.
2. Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been
altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.
SERVICE INFORMATION
Answers to Customer Frequently Asked Questions are available at u-line.com under Customer Care or you may contact our
Customer Care group directly, contact information below.
GENERAL INQUIRIES
SERVICE & PARTS ASSISTANCE
U-Line Corporation
Monday - Friday 8:00 am to 4:30 pm CST
8900 N. 55th Street
T: +1.800.779.2547
Milwaukee, Wisconsin 53223 USA
F: +1.414.354.5696
Monday - Friday 8:00 am to 4:30 pm CST
Service Email: [email protected]
T: +1.414.354.0300
Parts Email: [email protected]
F: +1.414.354.7905
Email: [email protected]
u-line.com
CONNECT WITH US
Designed, engineered and assembled in WI, USA
QUICK START GUIDE
u-line.com
This Quick Start Guide covers the basics of installation and general use of your product. For more details, see the
complete User Guide & Service Manual on u-line.com.
Contents
1
Safety and Warning
2
Environmental Requirements
3
Electrical
3
Door Swing
4
General Installation
5
Integrated Panel Installation
7
Control Operation
9
First Use
9
Sabbath Mode
10
Warranty
1
plus
eligible
warranty
This product is eligible for an additional one-year warranty at no charge when you register your product
on u-line.com. See complete warranty for details.
QUICK START GUIDE
u-line.com
Safety and Warning
! DANGER
NOTICE
This unit contains R600a (Isobutane) which is a
Please read all instructions before installing,
flammable hydrocarbon. It is safe for regular
operating, or servicing the appliance.
use. Do not use sharp objects to expedite
defrosting. Do not service without consulting the
Use this appliance for its intended purpose only and follow
“R600a specifications” section included in the
these general precautions with those listed throughout this
User Guide. Do not damage the refrigerant
guide:
circuit.
SAFETY ALERT DEFINITIONS
! WARNING
Throughout this guide are safety items labeled with a
Danger, Warning or Caution based on the risk type:
Service must be done by factory authorized
service personnel. Any parts shall be replaced
with like components. Failure to comply could
! DANGER
increase the risk of possible ignition due to
incorrect parts or improper service.
Danger means that failure to follow this safety
statement will result in severe personal injury or
death.
! WARNING
Warning means that failure to follow this safety
statement could result in serious personal injury
or death.
! CAUTION
Caution means that failure to follow this safety
statement may result in minor or moderate
personal injury, property or equipment damage.
1
QUICK START GUIDE
u-line.com
Environmental Requirements
OUTDOOR UNITS
This unit is designed to operate between 50°F (10°C) and
115 V UNITS
100°F (38°C). Higher ambient temperatures may reduce
This model is intended for indoor/interior applications only
the unit’s ability to reach low temperatures and/or reduce
and is not to be used in installations that are open/
ice production on applicable models.
exposed to natural elements.
For best performance, keep the unit out of direct sunlight
This unit is designed to operate between 50°F (10°C) and
and away from heat generating equipment.
100°F (38°C). Higher ambient temperatures may reduce
the unit’s ability to reach low temperatures and/or reduce
In climates where high humidity and dew points are
ice production on applicable models.
present, condensation may appear on outside surfaces.
This is considered normal. The condensation will
For best performance, keep the unit out of direct sunlight
evaporate when the humidity drops.
and away from heat generating equipment.
! CAUTION
In climates where high humidity and dew points are
present, condensation may appear on outside surfaces.
This is considered normal. The condensation will
Damages caused by ambient temperatures of
evaporate when the humidity drops.
40°F (4°C) or below are not covered by the
warranty.
! CAUTION
Damages caused by ambient temperatures of
40°F (4°C) or below are not covered by the
warranty.
2
QUICK START GUIDE
u-line.com
Electrical
Door Swing
! WARNING
Wall
Wall
1/4" Min.
(6 mm)
2-1/8" Min.
(54 mm)
SHOCK HAZARD — Electrical Grounding
Required. Never attempt to repair or perform
maintenance on the unit until the electricity has
been disconnected.
Never remove the round grounding prong from
the plug and never use a two-prong grounding
adapter.
90°
Door Swing
90°
Door Swing
Altering, cutting or removing power cord,
removing power plug, or direct wiring can cause
serious injury, fire, loss of property and/or life,
Units have a zero clearance for the door to open 90°,
and will void the warranty.
when installed adjacent to cabinets.
Never use an extension cord to connect power to
Stainless Steel and black and white models require 2-1/8"
the unit.
(54 mm) door clearance to accommodate the handle if
installed next to a wall.
Always keep your working area dry.
Integrated models require 1/4" (6 mm) clearance if
installed next to a wall. Allow for additional space for any
NOTICE
knobs or pulls installed on the integrated panel/frame.
Electrical installation must observe all state and
local codes. This unit requires connection to a
grounded (three-prong), polarized receptacle
that has been placed by a qualified electrician.
The unit requires a grounded and polarized 115 VAC,
60 Hz, 15A power supply (normal household current). An
individual, properly grounded branch circuit or circuit
breaker is recommended. A GFCI (ground fault circuit
interrupter) is usually not required for fixed location
appliances and is not recommended for your unit because
it could be prone to nuisance tripping. However, be sure
to consult your local codes.
3
QUICK START GUIDE
u-line.com
General Installation
INSTALLATION
1. Plug in the power/electrical cord.
LEVELING INFORMATION
1. Use a level to
2. Gently push the unit into position. Be careful not to
confirm the unit is
entangle the cord.
level. Level should
be placed along top
3. Re-check the leveling, from front to back and side to
edge and side edge
side. Make any necessary adjustments. The unit’s top
as shown.
surface should be approximately 1/8" (3 mm) below
the countertop.
1
4. Remove the interior packing material and wipe out the
inside of the unit with a clean, water-dampened cloth.
2. If the unit is not level, adjust the legs on the corners of
the unit as necessary.
Turn to Adjust
3. Confirm the unit is level after each adjustment and
repeat the previous steps until the unit is level.
INSTALLATION TIP
If the room floor is higher than the floor in the cutout
opening, adjust the rear legs to achieve a total unit rear
height of 1/8" (3 mm) less than the opening’s rear height.
Shorten the unit height in the front by adjusting the front
legs. This allows the unit to be gently tipped into the
opening. Readjust the front legs to level the unit after it is
correctly positioned in the opening.
4
QUICK START GUIDE
u-line.com
Integrated Panel Installation
Due to differences in floor construction or
1. Fully open door/drawer.
flush with the top of the door/drawer.
surrounding cabinetry, the panel may not sit
2. Starting at corner, pull
Panel
gasket away from door/
Door
drawer.
3. Continue to pull gasket
free from gasket channel.
9. Secure integrated
panel to door/drawer
4. Upon removal, lay gasket
Bar
Clamp
using clamps. A
down on a flat surface.
robust tape may also
be used. U-Line
recommends the use
5. Partially loosen the 3 screws, securing the top hinge to
of bar clamps to
the cabinet.
Door/Drawer
secure the panel to
the door/drawer. If
6. Align the panel with the outside edge (opposite the
using tape, be
hinge) and high enough to align with the highest point
Wood
Panel
certain the tape will
in the door/drawer.
not damage panel
finish upon removal.
7. Insert panel underneath top hinge and apply upward
pressure while bringing the lower portion of the panel
10.Using a 7/64" (3 mm)
flush to the door inside the lower hinge. The panel will
drill bit, drill 6 pilot
fit snuggly
Bar
Clamp
holes into the wood
panel 1/2" (12 mm)
deep using the holes in the door/drawer frame as a
8. Align door with cabinet. Tighten the top 3 screws,
guide.
securing the top hinge to the cabinet.
It is important to ensure that all drilled holes are
drilled to the correct depth in order to avoid
Align Top Of Panel With Highest Point Of Door/Drawer
splits in the wood when hardwood is installed.
11.Locate 6 of the #6x 1-1/4" (32 mm) screws provided
Align Panel
Against
Door/Drawe
Edge First
with your unit.
12.Using a Phillips screwdriver, place one screw into each
of the 6 pilot holes and screw down. Do not overtighten
screws.
5
QUICK START GUIDE
u-line.com
13.Be sure the screws force their way past the opening on
the gasket channel and sit flush against the bottom of
the channel.
Integrated Panel
Integrated Panel
14.Remove clamps from door/drawer.
If panel requires additional adjustment after
removing clamps, slightly loosen each screw and
adjust panel as necessary. Tighten screws upon
completion.
15.Starting at the corners, re-install the gasket into the
gasket channel in the frame. Make sure the gasket is
fully seated. This may take some force.
6
QUICK START GUIDE
u-line.com
Control Operation
ALL 1200 SERIES EXCEPT FZR
Not
Light Power Used LED
Up Down
CONTROL FUNCTION GUIDE
FUNCTION
COMMAND
DISPLAY/OPTIONS
ON/OFF
Press
and release
Unit will immediately turn ON or OFF.
Press
and release to leave interior
Toggle lights
Adjust refrigerator set
light on for 3 hours
When the “F” or “C” in the display is flashing, press
Press
or
and release
View temperature in unit
Press
and
together and release
Toggle between F/C
Hold
point
and
Glass door wine and beverage centers only.
or
for 5 seconds
to adjust the set point temperature.
The display will flash and then toggle from set point
to temperature in unit.
The display will change units.
DOOR ALERT NOTIFICATION
When the door is left open for more than 5 minutes:
• An audible tone will sound for several seconds every
minute.
• “dr” will appear in display.
Close door to silence alert and reset.
7
QUICK START GUIDE
u-line.com
Control Operation
1200 SERIES FZR
Up Down
Light Power
FZR/
REF LED
CONTROL FUNCTION GUIDE
FUNCTION
COMMAND
DISPLAY/OPTIONS
ON/OFF
Press
and release
Unit will immediately turn ON or OFF.
Press
and release to leave interior
Toggle lights
Adjust Freezer/
light on for 3 hours
When the “F” or “C” in the display is flashing, press
Press
or
and release
View temperature in unit
Press
and
together and release
Toggle between F/C
Hold
Refrigerator set point
Toggle between Freezer/
Refrigerator
and
Hold
Glass door wine and beverage centers only.
or
for 5 seconds
to adjust the set point temperature.
The display will flash and then toggle from set point
to temperature in unit.
The display will change units.
Unit will “beep” and display will show the default set
for 3 seconds
point for Refrigerator/Freezer
DOOR ALERT NOTIFICATION
When the door is left open for more than 5 minutes:
• An audible tone will sound for several seconds every
minute.
• “dr” will appear in display.
Close door to silence alert and reset.
8
QUICK START GUIDE
u-line.com
First Use
All U-Line controls are preset at the factory. Initial startup
Sabbath Mode
requires no adjustments.
1
NOTICE
2
3
4
5
6
7
U-Line recommends allowing the unit to run
overnight before loading with product.
This unit is Star-K certified and offers a Sabbath mode.
1200 SERIES
Sabbath mode disables system responses to user initiated
When plugged in, the unit will begin operating under the
activities and all external functions, including lighting,
factory default settings. If the unit was turned off during
display and audible alarms. The unit will still maintain
installation, simply press
internal temperatures and set points. View a full list of
and the unit will immediately
switch on. To turn the unit off, press
Star-K certified U-Line units at www.star-k.org.
.
To enable Sabbath Mode:
1024BEV/1024R
MECHANICAL DIAL CONTROL
The control dial turns unit ON/OFF and sets temperature.
1. Press
(4) and hold for ten seconds and release (the
This set point temperature is a base setting used by the
°F/°C symbol will flash briefly at the end of the ten
controller to maintain the temperature zone in the unit.
second period).
The factory default MID setting, number 4 set point, is
approximately 38°F (3°C). The set point temperature is a
2. The interior light and control display (3) will go dark
gauge for further temperature adjustments.
until user resets mode.
1024WC
3. NOTE: Although the display will not be visible, the
MECHANICAL DIAL CONTROL
temperature controls in the unit remain active and
The control dial turns unit ON/OFF and sets temperature.
preserve the interior temperature.
This set point temperature is a base setting used by the
controller to maintain the temperature zone in the unit.
Sabbath Mode remains active until
The factory default MID setting, number 3 or 4 set point,
(4) is quickly
pressed and released.
is approximately 50°F (10°C). The set point temperature
is a gauge for further temperature adjustments.
9
Copyright © 2014/2017 U-Line Corporation. All Rights Reserved.
Publication Number 30590 3/2017 Rev.A
U-Line Corporation (U-Line) Limited Warranty
One Year Limited Warranty
For one year from the date of original purchase, this U-Line product warranty covers all parts and labor to repair or replace
any part of the product that proves to be defective in materials or workmanship. For products installed and used for normal
residential use, material cosmetic defects are included in this warranty, with coverage limited to 60 days from the date of
original purchase. All service provided by U-Line under the above warranty must be performed by U-Line factory authorized
service, unless otherwise specified by U-Line. Service provided during normal business hours.
Available Second Year Limited Warranty
Beyond the standard one year warranty outlined above, U-Line offers an extension of the one year warranty coverage for an
additional second year from the date of purchase, free of charge. To take advantage of this second year warranty, you must
register your product with U-Line within two months from the date of purchase at u-line.com providing proof of purchase.
Five Year Sealed System Limited Warranty
For five years from the date of original purchase, U-Line will repair or replace the following parts, labor not included, that
prove to be defective in materials or workmanship: compressor, condenser, evaporator, drier, and all connecting tubing. All
service provided by U-Line under the above warranty must be performed by U-Line factory authorized service, unless
otherwise specified by U-Line. Service provided during normal business hours.
Terms
These warranties apply only to products installed in any one of the fifty states of the United States, the District of Columbia,
or the ten provinces of Canada. The warranties do not cover any parts or labor to correct any defect caused by negligence,
accident or improper use, maintenance, installation, service, repair, acts of God, fire, flood or other natural disasters. The
product must be installed, operated, and maintained in accordance with the U-Line User Guide.
The remedies described above for each warranty are the only ones that U-Line will provide, either under these warranties or
under any warranty arising by operation of law. U-Line will not be responsible for any consequential or incidental damages
arising from the breach of these warranties or any other warranty, whether express, implied, or statutory. Some states do
not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not
apply to you. These warranties give you specific legal rights, and you may also have other rights which vary from state to
state.
Any warranty that may be implied in connection with your purchase or use of the product, including any warranty of
merchantability or any warranty fit for a particular purpose is limited to the duration of these warranties, and only extends to five
years in duration for the parts described in the section related to the five year limited warranty above. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
• The warranties only apply to the original purchaser and are non-transferable.
• The second year and five year warranties cover products installed and used for normal residential or designated marine
use only.
• The warranties apply to units operated outside only if designed for outdoor use by model and serial number.
• Replacement water filters, light bulbs, and other consumable parts are not covered by these warranties.
• The start of U-Line’s obligation is limited to four years after the shipment date from U-Line.
• In-home instruction on how to use your product is not covered by these warranties.
• Food, beverage, and medicine loss are not covered by these warranties.
• If the product is located in an area where U-Line factory authorized service is not available, you may be responsible for
a trip charge or you may be required to bring the product to a U-Line factory authorized service location at your own
cost and expense.
• Units purchased after use as floor displays are covered by the limited one year warranty only and no coverage is
provided for cosmetic defects.
• Signal issues related to Wi-Fi connectivity are not covered by these warranties.
For parts and service assistance, or to find U-Line factory authorized service near you, contact U-Line:
8900 N. 55th Street, Milwaukee, WI 53223 • u-line.com • [email protected] • +1.800.779.2547
Warranty 30379 Rev K 04.01.2017
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement