U-Line U-2224DWRINT-00A, U-2218BEVINT-60A Quick start guide

U-Line U-2224DWRINT-00A, U-2218BEVINT-60A Quick start guide
QUICK START GUIDE
2000 Series
•
115 V / 60 Hz
QUICK START GUIDE
u-line.com
WELCOME TO U-LINE
Congratulations on your U-Line purchase. Your product comes from a company with over five decades and three generations
of premium modular ice making, refrigeration, and wine preservation experience. U-Line continues to be the American
leader, delivering versatility and flexibility for multiple applications including residential, light commercial, outdoor and marine
use. U-Line’s complete product collection includes modular Wine Captain® Models, Beverage Centers, Clear Ice Machines,
Crescent Ice Makers, Glass & Solid Door Refrigerators, Drawer Models, Freezers, and Combo® Models.
U-Line has captivated those with an appreciation for the finer things with exceptional functionality, style, inspired innovations
and attention to even the smallest details. We are known and respected for our unwavering dedication to product design,
quality and selection. U-Line is headquartered in Milwaukee, Wisconsin and has shipped product to five continents for over
two decades and is proud to have the opportunity to ship to you.
PRODUCT INFORMATION
Looking for additional information on your product? User Guides, Quick Reference Guides, CAD Drawings, Compliance
Documentation, and Product Warranty information are all available for reference and download at u-line.com.
PROPERTY DAMAGE / INJURY CONCERNS
In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following
steps:
1. U-Line Customer Care must be contacted immediately at +1.800.779.2547.
2. Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been
altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.
SERVICE INFORMATION
Answers to Customer Frequently Asked Questions are available at u-line.com under Customer Care or you may contact our
Customer Care group directly, contact information below.
GENERAL INQUIRIES
SERVICE & PARTS ASSISTANCE
U-Line Corporation
Monday - Friday 8:00 am to 4:30 pm CST
8900 N. 55th Street
T: +1.800.779.2547
Milwaukee, Wisconsin 53223 USA
F: +1.414.354.5696
Monday - Friday 8:00 am to 4:30 pm CST
Service Email: [email protected]
T: +1.414.354.0300
Parts Email: [email protected]
F: +1.414.354.7905
Email: [email protected]
u-line.com
CONNECT WITH US
Designed, engineered and assembled in WI, USA
QUICK START GUIDE
u-line.com
This Quick Start Guide covers the basics of installation and general use of your product. For more details, see the
complete User Guide & Service Manual on u-line.com.
Contents
1
Safety and Warning
2
Environmental Requirements
3
Electrical
3
Door Swing
4
General Installation
4
Integrated Panel Installation
6
Control Operation
8
First Use
8
Sabbath Mode
9
Warranty
1
plus
eligible
warranty
This product is eligible for an additional one-year warranty at no charge when you register your product on
u-line.com. See complete warranty for details.
QUICK START GUIDE
u-line.com
Safety and Warning
! DANGER
NOTICE
This unit contains R600a (Isobutane) which is a
Please read all instructions before installing,
flammable hydrocarbon. It is safe for regular
operating, or servicing the appliance.
use. Do not use sharp objects to expedite
defrosting. Do not service without consulting the
Use this appliance for its intended purpose only and follow
“R600a specifications” section included in the
these general precautions with those listed throughout this
User Guide. Do not damage the refrigerant
guide:
circuit.
SAFETY ALERT DEFINITIONS
! WARNING
Throughout this guide are safety items labeled with a
Danger, Warning or Caution based on the risk type:
Service must be done by factory authorized
service personnel. Any parts shall be replaced
with like components. Failure to comply could
! DANGER
increase the risk of possible ignition due to
incorrect parts or improper service.
Danger means that failure to follow this safety
statement will result in severe personal injury or
death.
! WARNING
Warning means that failure to follow this safety
statement could result in serious personal injury
or death.
! CAUTION
Caution means that failure to follow this safety
statement may result in minor or moderate
personal injury, property or equipment damage.
1
QUICK START GUIDE
u-line.com
Environmental Requirements
Electrical
This model is intended for indoor/interior applications only
! WARNING
and is not to be used in installations that are open/
exposed to natural elements.
SHOCK HAZARD — Electrical Grounding
Required. Never attempt to repair or perform
This unit is designed to operate between 50°F (10°C) and
maintenance on the unit until the electricity has
100°F (38°C). Higher ambient temperatures may reduce
been disconnected.
the unit’s ability to reach low temperatures and/or reduce
ice production on applicable models.
Never remove the round grounding prong from
the plug and never use a two-prong grounding
For best performance, keep the unit out of direct sunlight
adapter.
and away from heat generating equipment.
Altering, cutting or removing power cord,
In climates where high humidity and dew points are
removing power plug, or direct wiring can cause
present, condensation may appear on outside surfaces.
serious injury, fire, loss of property and/or life,
This is considered normal. The condensation will
and will void the warranty.
evaporate when the humidity drops.
Never use an extension cord to connect power to
the unit.
! CAUTION
Always keep your working area dry.
Damages caused by ambient temperatures of
40°F (4°C) or below are not covered by the
warranty.
NOTICE
Electrical installation must observe all state and
local codes. This unit requires connection to a
grounded (three-prong), polarized receptacle
that has been placed by a qualified electrician.
The unit requires a grounded and polarized 115 VAC,
60 Hz, 15A power supply (normal household current). An
individual, properly grounded branch circuit or circuit
breaker is recommended. A GFCI (ground fault circuit
interrupter) is usually not required for fixed location
appliances and is not recommended for your unit because
it could be prone to nuisance tripping. However, be sure
to consult your local codes.
2
QUICK START GUIDE
u-line.com
Door Swing
Wall
For Integrated models that are installed adjacent to a wall,
1/4" (6 mm)
1/4" (6 mm) clearance is recommended from wall on
hinge side to allow the door to open 90°. Allow for
additional space for any knobs or pulls installed on the
integrated panel/frame.
Stainless Steel models that are installed adjacent to a wall
require 2-1/4" (57 mm) door clearance on hinge side to
allow for door handle.
Units have a zero clearance when installed adjacent to
90°
Door Swing
cabinets.
Space Required
For any Knobs or Pulls
Integrated
2-1/4" MIN
(57 mm MIN)
Wall
90°
Door Swing
Stainless
3
QUICK START GUIDE
u-line.com
General Installation
4. Install the anti-tip bracket.
LEVELING INFORMATION
5. Remove the interior packing material and wipe out the
1. Use a level to confirm
inside of the unit with a clean, water-dampened cloth.
the unit is level. Level
should be placed along
top edge and side
1
Integrated Panel Installation
edge as shown.
1. Fully open door.
2. If the unit is not level,
remove grille and
2. Starting at corner, pull
adjust legs as
necessary.
gasket away from door.
2
3. Continue to pull gasket
free from gasket channel.
4. Upon removal, lay gasket down on a flat surface.
5. The panel should be aligned with the outside edge
Rotate Front and Back Legs to Adjust
(opposite the hinge) and high enough to align with the
3. Confirm the unit is level after each adjustment and
highest point in the door.
repeat the previous steps until the unit is level.
Align Top Of Panel With Highest Point Of Door
INSTALLATION TIP
If the room floor is higher than the floor in the cutout
opening, adjust the rear legs to achieve a total unit rear
Align Panel
Against
Door Edge
First
height of 1/8" (3 mm) less than the opening’s rear height.
Shorten the unit height in the front by adjusting the front
legs. This allows the unit to be gently tipped into the
opening. Adjust the front legs to level the unit after it is
correctly positioned in the opening.
INSTALLATION
NOTICE
1. Plug in the power/electrical cord.
Due to differences in floor construction or
surrounding cabinetry, the panel may not sit
flush with the top of the door.
2. Gently push the unit into position. Be careful not to
entangle the cord.
3. Re-check the leveling, from front to back and side to
side. Make any necessary adjustments. The unit’s top
surface should be approximately 1/8" (3 mm) below
the countertop.
4
QUICK START GUIDE
6. Secure integrated
panel to door using
u-line.com
11.Remove clamps from door.
Bar
Clamp
clamps. A robust
NOTICE
tape may also be
used. U-Line
If panel requires additional adjustment after
recommends the
removing clamps, slightly loosen each screw and
use of bar clamps
to secure the panel
to the door. If using
tape, be certain the
adjust panel as necessary. Tighten screws upon
Door/Drawer
completion.
Wood
Panel
12.Starting at the corners, re-install the gasket into the
tape will not
gasket channel in the frame. Make sure the gasket is
damage panel finish
fully seated.
upon removal.
7. Using a 7/64"
(3 mm) drill bit, drill
Bar
Clamp
6 pilot holes into
the wood panel 1/2"
(12 mm) deep using
the holes in the
door frame as a
guide.
NOTICE
It is important to ensure that all drilled holes are
drilled to the correct depth in order to avoid
splits in the wood when hardwood is installed.
8. Locate 6 of the #6x 1-1/2" (38 mm) screws provided
with your unit.
9. Using a Phillips screwdriver, place one screw into each
of the 6 pilot holes and screw down. Do not overtighten
screws.
10.Ensure the screws sit flush against the bottom of the
channel.
Integrated Panel
Integrated Panel
5
QUICK START GUIDE
u-line.com
Control Operation
ALL 2200 SERIES EXCEPT ZWC
Not
Light Power Used LED
Up Down
CONTROL FUNCTION GUIDE
FUNCTION
COMMAND
DISPLAY/OPTIONS
ON/OFF
Press
and release
Unit will immediately turn ON or OFF.
Press
and release to leave interior
Toggle lights
Adjust refrigerator set
light on for 3 hours
When the “F” or “C” in the display is flashing, press
Press
or
and release
View temperature in unit
Press
and
together and release
Toggle between F/C
Hold
point
and
Glass door wine and beverage centers only.
or
for 5 seconds
to adjust the set point temperature.
The display will flash and then toggle from set point
to temperature in unit.
The display will change units.
DOOR ALERT NOTIFICATION
When the door is left open for more than 5 minutes:
• An audible tone will sound for several seconds every
minute.
• “dr” will appear in display.
Close door to silence alert and reset.
6
QUICK START GUIDE
u-line.com
2200 SERIES ZWC
Light Power Auxiliary LED
Up Down
CONTROL FUNCTION GUIDE
FUNCTION
COMMAND
DISPLAY/OPTIONS
ON/OFF
Press
and release
Unit will immediately turn ON or OFF.
Toggle lights
Press
and release
Leave interior light on for 3 hours.
Press
or
and release
Press
or
to adjust set point
The zone you are setting will have its light turned on
(top zone first).
temperature
Adjust temperature
Press
Press
to change zones
or
Light will switch from top zone to the bottom zone.
to adjust set point
temperature
Press
Display will show the set temperature.
Display will show the set temperature.
to confirm and exit
The display will flash and then toggle from set point
View temperature in unit
Press
and
together and release
to temperature in unit. The temperature shown will
correspond to the illuminated zone.
Toggle between F/C
Hold
and
for 5 seconds
The display will change units.
DOOR ALERT NOTIFICATION
When the door is left open for more than 5 minutes:
• An audible tone will sound for several seconds every minute.
• “dr” will appear in display.
Close door to silence alert and reset.
7
QUICK START GUIDE
u-line.com
First Use
All U-Line controls are preset at the factory. Initial startup
requires no adjustments.
NOTICE
U-Line recommends allowing the unit to run
overnight before loading with product.
When plugged in, the unit will begin operating under the
factory default settings. If the unit was turned off during
installation, simply press
and the unit will immediately
switch on. To turn the unit off, press
.
Sabbath Mode
1
2
3
4
5
6
7
This unit is Star-K certified and offers a Sabbath mode.
Sabbath mode disables system responses to user initiated
activities and all external functions, including lighting,
display and audible alarms. The unit will still maintain
internal temperatures and set points. View a full list of
Star-K certified U-Line units at www.star-k.org.
To enable Sabbath Mode:
1. Press
(4) and hold for ten seconds and release (the
°F/°C symbol will flash briefly at the end of the ten
second period).
2. The interior light and control display (3) will go dark
until user resets mode.
3. NOTE: Although the display will not be visible, the
temperature controls in the unit remain active and
preserve the interior temperature.
Sabbath Mode remains active until
(4) is quickly
pressed and released.
8
Copyright © 2016/2017 U-Line Corporation. All Rights Reserved.
Publication Number 30594 3/2017 Rev.A
U-Line Corporation (U-Line) Limited Warranty
One Year Limited Warranty
For one year from the date of original purchase, this U-Line product warranty covers all parts and labor to repair or replace
any part of the product that proves to be defective in materials or workmanship. For products installed and used for normal
residential use, material cosmetic defects are included in this warranty, with coverage limited to 60 days from the date of
original purchase. All service provided by U-Line under the above warranty must be performed by U-Line factory authorized
service, unless otherwise specified by U-Line. Service provided during normal business hours.
Available Second Year Limited Warranty
Beyond the standard one year warranty outlined above, U-Line offers an extension of the one year warranty coverage for an
additional second year from the date of purchase, free of charge. To take advantage of this second year warranty, you must
register your product with U-Line within two months from the date of purchase at u-line.com providing proof of purchase.
Five Year Sealed System Limited Warranty
For five years from the date of original purchase, U-Line will repair or replace the following parts, labor not included, that
prove to be defective in materials or workmanship: compressor, condenser, evaporator, drier, and all connecting tubing. All
service provided by U-Line under the above warranty must be performed by U-Line factory authorized service, unless
otherwise specified by U-Line. Service provided during normal business hours.
Terms
These warranties apply only to products installed in any one of the fifty states of the United States, the District of Columbia,
or the ten provinces of Canada. The warranties do not cover any parts or labor to correct any defect caused by negligence,
accident or improper use, maintenance, installation, service, repair, acts of God, fire, flood or other natural disasters. The
product must be installed, operated, and maintained in accordance with the U-Line User Guide.
The remedies described above for each warranty are the only ones that U-Line will provide, either under these warranties or
under any warranty arising by operation of law. U-Line will not be responsible for any consequential or incidental damages
arising from the breach of these warranties or any other warranty, whether express, implied, or statutory. Some states do
not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not
apply to you. These warranties give you specific legal rights, and you may also have other rights which vary from state to
state.
Any warranty that may be implied in connection with your purchase or use of the product, including any warranty of
merchantability or any warranty fit for a particular purpose is limited to the duration of these warranties, and only extends to five
years in duration for the parts described in the section related to the five year limited warranty above. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
• The warranties only apply to the original purchaser and are non-transferable.
• The second year and five year warranties cover products installed and used for normal residential or designated marine
use only.
• The warranties apply to units operated outside only if designed for outdoor use by model and serial number.
• Replacement water filters, light bulbs, and other consumable parts are not covered by these warranties.
• The start of U-Line’s obligation is limited to four years after the shipment date from U-Line.
• In-home instruction on how to use your product is not covered by these warranties.
• Food, beverage, and medicine loss are not covered by these warranties.
• If the product is located in an area where U-Line factory authorized service is not available, you may be responsible for
a trip charge or you may be required to bring the product to a U-Line factory authorized service location at your own
cost and expense.
• Units purchased after use as floor displays are covered by the limited one year warranty only and no coverage is
provided for cosmetic defects.
• Signal issues related to Wi-Fi connectivity are not covered by these warranties.
For parts and service assistance, or to find U-Line factory authorized service near you, contact U-Line:
8900 N. 55th Street, Milwaukee, WI 53223 • u-line.com • [email protected] • +1.800.779.2547
Warranty 30379 Rev K 04.01.2017
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement