GE Monogram | ZIK30GNHII | Quick Spec | GE Monogram ZIK30GNHII Quick Spec

MONOGRAM 30" FULLY INTEGRATED CUSTOMIZABLE
REFRIGERATORS FOR DUAL INSTALLATION
ZIC30GNHII/
ZIK30GNHII
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
The Installation Space
The finished cutout width must be 30".
25” min. depth
The cutout depth must be 25" for flush installations.
- The front face of the refrigerator fits flush with 25" depth
adjacent cabinets.
Electrical
A 115V, 60Hz., 15 or 20 amp power supply is required. An
individual properly grounded branch circuit or circuit breaker
is recommended. Install a properly grounded 3-prong electrical
receptacle recessed into the back wall. Electrical must be located
on rear wall as shown.
30” Finished Width
Note: GFI (ground fault interrupter) is not recommended.
Water Line
- A cold water supply is required for automatic
icemaker operation. The water pressure must be
between 40 and 120 p.s.i.
- Route 1/4" OD copper or GE SmartConnect™ plastic
tubing between the house cold water line and the
water connection location.
- Tubing should be long enough to extend to the
front of the refrigerator. Allow enough tubing to
accommodate a bend leading into the water line
connection.
- Water line can enter an opening through the floor or
back wall.
- Install a shut-off valve between the icemaker water
valve and cold water supply in the home.
Height options
80” or * 84“
23-3/4”
3/4”
60" Finished Width
29-3/4”
Wall
View
Anti-tip location do not obstruct
Height adjustable
from 79-3/8” to 80-3/8” *
84"
max
80"
min
Finished
Opening
1/8”
4”
77"
25"min. Cutout
Depth
Water Tube & Electrical Outlet 6"
4”
3-1/8”
1-1/4”
Note: When two units are placed side
by side, order heater kit ZUG30.
Listed by
Underwriters
Laboratories
Product Specification Revised 7/16
MONOGRAM 30" FULLY INTEGRATED CUSTOMIZABLE
REFRIGERATORS FOR DUAL INSTALLATION
ZIC30GNHII/
ZIK30GNHII
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Customization Basics:
These refrigerators are factory set for a right hinged
door swing. The door swing is reversible. Choose
an RH model with hinge on the right side; the door
swings left to right. Choose an LH model with hinge
on the left side; the door will swing right to left.
Product Dimensions
Note:
For 84" panels, the top space behind the top panel
can be enclosed with wood and stained by the
cabinet maker to match adjacent cabinetry.
Door Handles
Custom handles of your choice, supplied by your
cabinetmaker, can be installed. If desired, you may
order WR12X10988 Monogram European stainless
steel tubular handle kit for custom panels.
Optional Accessory Kits
ZUG30: For side-by-side installation
European Handle Kit: can be purchased through
GE Parts store - WR12X10988
Door Swing Clearances
The installation must allow for clearances to adjacent
walls or cabinets. These refrigerators are equipped
with a 2-position door stop. The factory-set 115°
door swing can be adjusted to 90° if clearance to
adjacent cabinets or walls is restricted.
130° Door Swing
25"
Min. to
Wall
90° Door Swing
23-7/8"
Behind
Frame
36-3/4"
90°
130°
4" Min. to Wall
5" Min. for Professional Models
Allow 15" minimum clearances for a full 115° doorswing.
- 5" minimum clearance is required when the door
swing is adjusted to 90°.
605Dia20
605Dia21
- See door swing illustrations to determine interaction
with adjacent cabinets or countertops.
Listed by
Underwriters
Laboratories
Product Specification Revised 7/16
MONOGRAM 30" FULLY INTEGRATED CUSTOMIZABLE
REFRIGERATORS FOR DUAL INSTALLATION
ZIC30GNHII/
ZIK30GNHII
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
SS PANEL ACCESSORY & DIMENSIONS
3/4"-Thick Solid Door Panel Options
For 80" High Installation
- European - Panel Model ZKST300N
LH & RH capable
- Professional - Panel Model ZKSP300N
LH & RH capable
For 84" High Installation the door panel is not
reversible for the 84" installations. A left or righthand door panel accessory must be purchased.
-
LH European - Model ZKST304NLH
RH European - Model ZKST304NRH
LH Professional - Model ZKSP304NLH
RH Professional - Model ZKSP304NRH
Note: Each kit also contains matching freezer and
cutomizable drawer panels, handles and toekick.
3/4"-Thick Frame for Glass Door Options
For 80" High Installation
- European - Panel Model ZKGT300N
LH & RH capable
- Professional - Panel Model ZKGP300N
LH & RH capable
For 84" High Installation The door panel is not
reversible for the 84" installations. A left or righthand door panel accessory must be purchased. The
top space behind the top panel can be enclosed
with wood and stained by the cabinet maker to
match adjacent cabinetry.
- LH European - Model ZKGT304NLH
- RH European - Model ZKGT304NRH
Note: Each kit also contains matching freezer and
convertible drawer panels, handles and toekick.
Optional Accessory Kits#:
- Side-by-Side Installation Kit - ZUG30
- European handle kit - 3 handles (can be purchased
through GE Parts) - WR12X10988
29-3/4”
29-3/4”
23”
Fresh
Food
45-3/8” for 80” Installation
49-3/8” for 84” Installation
Glass Panel
for Fresh Food
6”
80”
Install.
10”
84”
Install.
45-3/8”
Cabinets
49-3/8”
Ice Drawer
Freezer
Convertible
Drawer
4”
1/8” Min.*
7-1/2”
6”
3-3/8”
22-3/4”
*Pro style window is slightly smaller.
Note:
EXTREMELY IMPORTANT: Routing of custom wood
panels is required where the hooks and brackets
attach to the panel. Custom panels must be at least
3/4" thick where the hooks and brackets hardware
are attached.
Listed by
Underwriters
Laboratories
Product Specification Revised 7/16
MONOGRAM 30" FULLY INTEGRATED CUSTOMIZABLE
REFRIGERATORS FOR DUAL INSTALLATION
ZIC30GNHII/
ZIK30GNHII
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
3/4" CUSTOM PANEL DIMENSIONS:
80" High Fully Integrated Installation
If you choose to install custom panels, they must
be cut to the dimensions shown. The panels will
attach to the door and drawers using a hook and
bracket system.
NOTE: This product is designed to handle 3/4"
panels that are made of wood. 33-3/8" x 23" is
the maximum opening for a glass window. The
opening may be smaller if desired.
29-3/4”
3/4" CUSTOM PANEL DIMENSIONS:
84" High Fully Integrated Installation
If you choose to install custom panels, they must be
cut to the dimensions shown. The panels will attach
to the door and drawers using a hook and bracket
system. The top space behind the top panel can
be enclosed with wood and stained by the cabinet
maker to match adjacent cabinetry.
NOTE: This product is designed to handle
3/4" panels that are made of wood. 33-3/8" x 23"
is the maximum opening for a glass window. The
opening may be smaller if desired.
6”
45-3/8”
29-3/4”
PANELS FOR
GLASS DOOR
33-3/8”
10”
49-3/8”
PANELS FOR
GLASS DOOR
33-3/8”
6”
3-3/8”
3-3/8”
6”
23”
3-3/8”
PANELS FOR SOLID DOOR
AND DRAWERS
45-3/8”
7-1/2”
22-3/4”
3-3/8”
23”
29-3/4”
29-3/4”
PANELS FOR SOLID DOOR
AND DRAWERS
A
IMPORTANT NOTE:
Maximum panel weight:
A Fresh Food Door Panel: 33 lbs.
B Freezer Door Panel: 9 lbs.
C Convertible Food
Door Panel: 19 lbs.
B
49-3/8”
7-17/32”
C
A
B
IMPORTANT NOTE: Maximum
panel weight:
A Fresh Food Door Panel: 33 lbs.
B Freezer Door Panel: 9 lbs.
C Convertible Food
Door Panel: 19 lbs.
4”
22-23/32”
C
4”
3/4”
*Styles must be a min 3-3/8" to cover aluminum
door frame.
Design Tip: Some amount of each panel will
be visible on the interior side of the unit. It is
recommended that both sides of each panel be
finished.
Design Tip: If using custom panels, a custom toe kick
should be considered. The bottom of case is white.
*Styles must be a min 3-3/8" to cover aluminum
door frame.
Design Tip: Some amount of each panel will
be visible on the interior side of the unit. It is
recommended that both sides of each panel be
finished.
Design Tip: If using custom panels, a custom toe kick
should be considered. The bottom of case is white.
Note: EXTREMELY IMPORTANT: Routing of custom
wood panels is required where the hooks and
brackets attach to the panel. Custom panels must
be at least 3/4" thick where the hooks and brackets
hardware are attached.
Listed by
Underwriters
Laboratories
Product Specification Revised 7/16
MONOGRAM 30" FULLY INTEGRATED CUSTOMIZABLE
REFRIGERATORS FOR DUAL INSTALLATION
ZIC30GNHII/
ZIK30GNHII
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Advance Planning
SS European or Custom Panels Top View
115˚ DOOR SWING (factory setting)
Use this page to determine door swing interaction
with adjacent cabinets or countertops.
Allow 15” minimum clearance
for a full 115˚door swing.
Product Clearances
These refrigerators are equipped with a
2-position door stop. The factory-set 115˚ door
swing can be adjusted to 90˚ if clearance to
adjacent cabinets or walls is restricted.
Refrigerator
1/8”
1-3/8”
2-1/16”
1-1/2”
1-1/4”
1”
3/4”
3/4”
1”
1-1/4”
1-1/2”
Listed by
Underwriters
Laboratories
Product Specification Revised 7/16
MONOGRAM 30" FULLY INTEGRATED CUSTOMIZABLE
REFRIGERATORS FOR DUAL INSTALLATION
ZIC30GNHII/
ZIK30GNHII
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
SS Professional Panels Top View
115˚ DOOR SWING (factory setting)
Refrigerator
Advance Planning
Use this page to determine door swing interaction
with adjacent cabinets or countertops.
Product Clearances
These refrigerators are equipped with a
2-position door stop. The factory-set 115˚ door
swing can be adjusted to 90˚ if clearance to
adjacent cabinets or walls is restricted.
Allow 15” minimum clearance
for a full 115˚door swing.
1-1/8”
2-1/2”
1-1/4”
Listed by
Underwriters
Laboratories
Product Specification Revised 7/16
MONOGRAM 30" FULLY INTEGRATED CUSTOMIZABLE
REFRIGERATORS FOR DUAL INSTALLATION
ZIC30GNHII/
ZIK30GNHII
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Advance Planning
Use this page to determine door swing interaction
with adjacent cabinets or countertops.
Refrigerator
For a 90º door swing
allow 5” min. clearRefrigerator
ance to a wall, for
stainless steel
models.
SS European or Custom Panels Top View
90˚ DOOR SWING (optional setting)
1/8”
1-3/16”
2-1/4”
1-1/2”
1-1/4”
1”
3/4”
3/4”
1”
1-1/4”
1-1/2”
Listed by
Underwriters
Laboratories
Product Specification Revised 7/16
MONOGRAM 30" FULLY INTEGRATED CUSTOMIZABLE
REFRIGERATORS FOR DUAL INSTALLATION
ZIC30GNHII/
ZIK30GNHII
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Advance Planning
Refrigerator
Use this page to determine door swing interaction
with adjacent cabinets or countertops.
SS Professional Panels Top View
90˚ DOOR SWING (optional setting)
For a 90º door
swing allow 5” min.
clearance to a wall,
for stainless steel
Refrigerator
models.
1-1/4”
2-9/16”
Listed by
Underwriters
Laboratories
Product Specification Revised 7/16
MONOGRAM 30" FULLY INTEGRATED CUSTOMIZABLE
REFRIGERATORS FOR DUAL INSTALLATION
ZIC30GNHII/
ZIK30GNHII
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Features and Benefits
- Integrated design - Blends seamlessly with surrounding
cabinetry and can be fitted with custom, professional or
European-style panels in 80- or 84-inch heights
- Dual-refrigeration system - Provides precise and
customizable climate control with three independent
temperature-management zones
- Convertible lower drawer - With independent temperature
controls can be used to store fresh food, frozen foods, wine
or beverages
- GE unveils first HFC-free refrigerator in the U.S. - Replaces
the standard hydrofluorocarbon (HFC) refrigerant with
a hydrocarbon (HC) alternative, R600A
- Freezer drawer with electronic icemaker - Includes a
removable ice bin and scoop and accommodates everyday
freezer items
- LED interior lighting - Gradually brightens and dims when
door or drawer is opened and closed
- Adjustable glass shelves - With aluminum trim provides an
elegant and uncluttered appearance
- Soft-close freezer and convertible drawers - Smoothly and
quietly slide into a secure shut position
- Illuminated, electronic glass-touch controls - Make it
easy to adjust interior lighting, temperature (Fahrenheit or
Celsius), control lock and other settings for all three climate
zones
- GE water filtration system - Provides clean, fresh-tasting
ice cubes (GSWF)
- Sabbath mode-capable - Allows the refrigerator to comply
with Kosher practices
- ENERGY STAR® qualified - To use less energy and save
money (ZIC30GNHII model only)
- Model ZIC30GNHII - Solid door
- Model ZIK30GNHII - Glass door
ZIC30GNHII - Solid door
ZKST3080N
ZIK30GNHII - Glass door
ZKGT3080N
Product Specification Revised 7/16
Download PDF

advertising