GE Monogram | ZIPP360NHSS | Quick Specs | GE Monogram ZIPP360NHSS Quick Specs

GE Monogram® 36" Built-In French-door Bottom-freezer
ZIPP360NH
OVERALL DIMENSIONS
25 13/16" (65.6)
23 13/16" (60.5)
36" (91.4)
2 13/16"
9 11/16"
(7.1)
(24.6)
5/8"
(1.6)
40"
*84"
*83 1/2"
(101.6)
(213.4)
(212.1)
*73 3/8"
(186.4)
9/16"
(1.4)
*30 1/4"
(76.8)
*26 9/16"
(67.4)
SPECIFICATIONS
*24 9/16"
(62.4)
Overall Width
36" (91.4 cm)
Overall Height
84" (213.4 cm)
Overall Depth
25 13/16" (65.6 cm)
Door Clearance
18 1/8" (46 cm)
Cutout Width
35 1/2" (90.2 cm)
Cutout Height
83 1/2"- 84 1/2"
(212.1-214.6 cm)
Cutout Depth
24" (61 cm)
Electrical Requirements
115 V AC, 60 Hz
20 amp circuit
Plumbing Requirements
1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight
700 lb (317.5 kg)
*4 3/8"
FRONT VIEW
(11.1)
SIDE VIEW
*Shipping height. Use leveling legs and wheels for
maximum 1" height adjustment from shipping height.
35" (89.0)
Case width
**12 1/8"
**12 1/8"
(30.8)
(30.8)
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply
is required. An individual properly grounded
branch circuit or circuit breaker is recommended.
Install a properly grounded 3-prong electrical
receptacle recessed into the back wall.
18 1/8"
(46.0)
**130° Door swing
Doors can be adjusted to
90° door swing
5" min to wall
(12.7)
5" min to wall
TOP VIEW
(SHOWING DOOR SWING)
(12.7)
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may varyZIPP360NZ
due to manufacturing tolerances.
Product Specification Created 8/14
GE Monogram® 36" Built-In French-door Bottom-freezer
STANDARD INSTALLATION
(12.2)
A
(5.9)
3"
6"
24" (61.0)
1 1/2"
(7.6)
(15.2)
(5.9)
ELEC.
24" (61.0)
7/16" (1.1)
Trim overlap
2"
(5.1)
35 1/2" (90.2) ELEC.
2 5/16"
NOTES
4 13/16"
35 1/2" (90.2)
2 5/16"
(3.8)
10"
7/16" (1.1)
Trim overlap
(25.4)
6"
10"
WARNING:
*83 1/2" min
*84 1/2" max
The refrigerator is top
heavy and must be secured
to prevent the possibility of
tipping forward. Failure to
do so may result in death
or serious injury.
75"
(212.1-214.6)
*Trim will overlap
additional 7/16"
(212.1-214.6)
Trim will overlap
additional 7/16"
(190.5 )
From floor
to bottom
of electrical
area
75"
(190.5 )
From floor
to bottom
of electrical
area
5"
5" 3 1/2"
(12.7)
(12.7)
WATER
5"
(12.7)
A M
ounting the junction
box in this location will
also allow for front
accessability through
access panel.
B Water supply area
(15.2)
(25.4)
83 1/2" min
84 1/2" max
ZIPP360NH
3 1/2"
(9.0)
(8.9)
3 1/2"
W
WATER
B
5" 3 1/2"
(8.9)
10" (25.4)
FRONT VIEW
WATER
(12.7)
FRONT VIEW
SIDE VIEW
SIDE VIEW
Anti-tip Bracket
CL
Bracket
mounted
into vertical
wall studs
centered
within the
cutout
Use two
additional hole
locations at end
of brackets
81 1/2"
(207.0)
Ensure holes
selected are
centered on
the studs
Wall
Studs
(8.9)
The information below is
for cabinet design only.
When installing the antitip system you must use
the product installation
instructions.
The information below
applies to all installation
constructions:
• A wall bracket, bolts and
toggles will be supplied
with the unit.
• The bolts will be used to
attach bracket to wall in
4 locations. Two of the
locations must penetrate
the center of the wall
studs.
• The toggles are used for
stability in drywall and
when metal studs are
encountered. Lag bolts
are used in wood studs.
• In installation opening,
measure 81 ½” from
floor and draw a
horizontal line.
• Locate and mark the wall
studs on horizontal line.
Verify at least two studs
have their centerlines
within the center 32.5”
of installation opening to
ensure 2 wall studs are
penetrated.
• The bracket will be
centered left to right in
opening with bottom of
bracket on the horizontal
line.
SIDE VIEW INSTALLED
WITH ANTI-TIP BRACKET
FRONT
VIEW OF CUTOUT
ZIPP360NZ
WITH ANTI-TIP BRACKET
ZIC360NXRH
• When unit is placed in
opening, the bracket tabs
will align with openings
in back of the unit. The
unit will be secured to the
bracket using supplied
“L” bolts.
See Installation
Instructions for detailed
instructions.
Product Specification Created 8/14
GE Monogram® 36" Built-In French-door Bottom-freezer
ZIPP360NH
FEATURES AND BENEFITS
French-door design gives you wide-open access
to every fresh food shelf and bin.
Finely crafted glass-front metal door bins
with riveted metal accents offer easy access to
beverages and quick-grab items.
LED lighting positioned throughout the interior
and under fresh food drawers spotlights food
inside the refrigerator and in the freezer
Upfront electronic controls with digital readout
offer a range of precise temperature settings, all
within easy reach.
Large full-extension freezer drawer has storage
bins that slide out independently of one another
for easy loading and unloading. An automatic
icemaker keeps plenty of filtered ice on hand.
Precision glass-front produce and deli drawers
feature full-extension, soft-close slides.
Aluminum trimmed glass shelves allow
convenient access to contents in the fresh-food
compartment.
Product Specification Created 8/14
Download PDF

advertising