GE Profile | PT9050SFSS | Specs PT9050SF | GE Profile PT9050SFSS Specs PT9050SF

9-1/2" MAX.
F
22"
Junction box
location
9-1/2"
Cutout depth
23-1/2" MIN
PT9050SF
22" to
GEConduit
Profile Series 30 in. Built-In Single Convection Wall Oven
™
of
Junctionbottom
box
location junction box
40"
Dimensions and Installation Information (in inches)
22" to
Most 30” Wall Cabinets can be used with this
bottom of
unit.
junction box
Conduit
D ovens are not approved for
Note: These
40"
stackable installations. Cabinets installed
adjacent to wall ovens must have an adhesion
spec of at least a 194°F temperature rating.
Electric wall ovens are not approved for
installation with a plug and receptacle. They
must be hard wired in accordance with
installation instructions.
Installation Information: Before installing,
consult installation instructions packed with
product for ­current dimensional data.
Cutout width
28-1/2" MIN.
28-5/8" MAX.
A
C
A
B
C
F
9-1/2" MAX.
Cutout depth
23-1/2" MIN
B
22" Door
D handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference
with the handle.
Cutout width
28-1/2" MIN.
28-5/8" MAX.
F
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Recommended
cutout location
from floor
30'' 32-1/2"
Side-by-side installations rerquire at least 2"
30''
between cutouts.
2 x 4 or
equivalent runners
Rating
levelKW
with
bottom of cutout
Cabinet
4.5 sides of cutout
240V with
and flush
2 x 4 or
A – Overlap of oven at top of cutout
PT9050
or solid
bottom
3.4 floor.
equivalent
runners
208V
B – Overlap of oven over side of edges of cutout
level with bottom of cutout
Cabinet
30"
Breaker Size
C
–
Overlap
of
oven
at
bottom
of
cutout
and flush with sides of cutout
A – Overlap of oven at top of cutout
1-1/4"
20 Amps
240Vfloor.
or solid bottom
Oven
B – Overlap
of oven over side of edges of cutout
3/4"
208V 20 Amps
Overall
depth of
with
handle
C – OverlapDof–oven
at bottom
cutout
1-1/4"
0 lbs.)
Overall depth without handle
Oven
– Overall
height with trim
D – Overall E
depth
with handle
27-3/16"
)
Overall Fdepth
without
handle
23-1/2"
– Overall
width
E – Overall height with trim
28-3/8"
F – Overall width
29-3/4"
D
Conduit
40"
Cutout height
E
27-1/4" MIN.
27-5/16" MAX.
Recommended
cutout location
from floor
32-1/2"
Conduit
40" Junction box
location
E
22" to
bottom of
junction box
Cutout width
28-1/2" MIN
28-5/8" MAX
22"
D
A
23" minimum
door opening
22"
allowance
B
C
23" minimum
door opening
allowance
30''
PT9050
30"
1-1/4"
3/4"
1-1/4"
Suitable
27-3/16"
bracing
to
support
23-1/2"
runners
28-3/8"
29-3/4"
For answers to your Monogram® or GE appliance
questions, visit our website at geappliances.com
or call GE Answer Center® service, 800.626.2000.
CL
CL
2 x 4 or
equivalent runners
2 x 4 or
level with bottom of cutout
equivalent runners
sides of cutout
level with bottom of cutout and flush with
Cabinet
and flush with sides of cutoutor solid bottom
floor.of oven at top of cutout
A – Overlap
or solid bottom floor.
B – Overlap of oven over side of edges of
C – Overlap of oven at bottom of cutout
Oven
Suitable
D – Overall depth with handle
bracing
(must support
200 lbs.) (must support 200 lbs.)
Overall depth without handle
to support
E – Overall height with trim
runners
F – Overall width
*
*ADA qualified based
on Uniform Federal
Accessibility Standards
Listed by
Underwriters
Laboratories
Specification Revised 7/13
220253
PT9050SF
GE Profile™ Series 30 in. Built-In Single Convection Wall Oven
Optional Undercounter Dimensions and Installation Information
Note: 36" ribbon cooktop are approved for use
over GE 30" single wall ovens and warming
drawers. 30" ribbon cooktops are approved
for use over 30" and GE 27" single wall ovens
and warming drawers. Refer to cooktop and
wall oven installation information packed with
products for current dimensional data.
Dimension and installation information are shown in inches.
Gas or electric cooktops may be installed over this
oven. See cooktop installation instructions for cutout size.
See label on top of oven for approved cooktop models.
Gas or electric connections
for gas cooktop must be
located in an adjacent
accessible location to the right
240V / 208V
Junction box
location
25
9-1/2"
Note: Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference
with the handle.
Installation information: Before installing,
consult installation instructions packed with
products for current dimensional data and for
alternate installation options.
28 1/2" MIN.
28 5/8" MAX.
Allow 1-1/4"
top/bottom and
1" on sides for
overlap
27 1/4" MIN.
27 5/16" MAX.
Electric wall ovens are not approved for
installation with a plug and receptacle. They
must be hard wired in accordance with
installation instructions.
22" MIN.
Above
support
platform
36"
Typical
countertop
height
24
4"
3/4" Support
platform required
Must Support 200 Lbs.
*
For answers to your Monogram® or GE appliance
questions, visit our website at geappliances.com
or call GE Answer Center® service, 800.626.2000.
*ADA qualified based
on Uniform Federal
Accessibility Standards
Listed by
Underwriters
Laboratories
Specification Revised 7/13
220253
PT9050SF
GE Profile™ Series 30 in. Built-In Single Convection Wall Oven
Features and Benefits
•True European Convection with Direct Air - Bakes evenly as warm
air blows from the top in and around bakeware
•Brillion™-Enabled - Wirelessly control oven functions from
your smartphone
•Notification Lighting - Know the status of your oven functions
with a quick glance
•Ten-Pass Bake Element - Even baking is assured with heat that
covers more surface area
•Ten-Pass Dual Broil Element - Large and small dishes brown
evenly with two, full-coverage elements
•Self-Clean Heavy-Duty Roller Rack - Easily access items with
a rack that glides smoothly
•Progressive Halogen Oven Lighting - See what you’re baking
with lights that slowly illuminate the oven
•Self-Clean with Steam Clean Option - Clean your oven the way
you want
•Glass Touch Controls - Set temperatures quickly and clean with
little effort
•5.0 cu. ft. Oven Capacity - Cook more dishes at once
• Model PT9050SFSS - Stainless steel
PT9050SFSS
Specification Revised 7/13
220253
Download PDF

advertising