Jenn-Air | JMW2427DB | Dimension Guide | Jenn-Air JMW2427DB Dimension Guide

Jenn-Air JMW2427DB Dimension Guide
JENN-AIR DETAILED PLANNING DIMENSIONS
®
27" COMBINATION MICROWAVE/WALL OVEN
E 1 of 4
C
JMW2427D – 27" x 433⁄4" x 255⁄16"
PRODUCT DIMENSIONS
A
MODEL #
JMW2427D
B C
D
E
Overall width
Euro-Style Stainless
A
Power Supply
Location
Floating Glass
F
J
G
H
I
FRONT VIEW
A
L
K
L
M
N
O
in
cm
27
68.6
26 ⁄16
68.4
1
5 ⁄2
14
⁄2
1.2
15
B
Height of control panel
C
Space between control panel and door
D
Height to top of microwave oven handle
12 ⁄16
31.0
E
Height of microwave oven door
1211⁄16
32.3
F
Space between doors
11⁄8
2.9
G
Height to top of oven handle
21 ⁄16
54.4
H
Height of oven door
22 ⁄8
56.2
1
3
7
1
I
Height of trim
1 ⁄16
4.3
J
Overall height
433⁄4
111.1
K
Width of recessed oven
257⁄16
64.6
L
Width of conduit channel
3 ⁄16
8.7
23 ⁄4
59.0
K 24 ⁄8
61.9
H
11
7
I
M
Depth of recessed oven
N
Depth with doors
O
Depth with handles
25 ⁄16
64.3
P
Depth with door fully open
453⁄8
115.3
D
J
1
3
5
F
P
A
B
E
C
TOP VIEW
A
B C
D
E
Power Supply
Location
F
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
J
8613AdZw915
G
JENN-AIR DETAILED PLANNING DIMENSIONS
®
2 of 4
27" COMBINATION MICROWAVE/WALL OVEN
JMW2427D – 27" x 433⁄4" x 255⁄16"
DIMENSIONS AS INSTALLED
H
I
MODEL #
J
K
D
F
A
B
E
SIDE VIEW
JMW2427D
in
cm
A
Height to top of upper handle
37 ⁄16
94.4
B
Height to top of lower handle
23 ⁄16
59.2
C
Height of trim extending
below cutout
111⁄16
4.3
D
Height from top of recessed
oven to top of control panel
215⁄16
7.4
E
Height from bottom of
recessed oven foot to bottom
of oven vent
3
⁄16
0.5
D
Height of recessed oven
41
104.2
E
Height to top of control panel
43 ⁄16
110.9
F
Depth with door fully open
453⁄8
115.3
G
Depth with handles
25 ⁄16
64.3
H
Depth with doors
24 ⁄8
61.9
I
Depth of recessed oven
23 ⁄4
59.0
G
3
5
11
5
3
1
C
Power Supply
Location
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8613AdZw915
JENN-AIR DETAILED PLANNING DIMENSIONS
®
3 of 4
27" COMBINATION MICROWAVE/WALL OVEN
JMW2427D – 27" x 433⁄4" x 255⁄16"
OPENING/CLEARANCE DIMENSIONS
A
A
MODEL #A
H
I
J
K
D
D
D
B
B
F
A
B
E
E
e
G E
e
e
CF
FRONT VIEW
in
cm
27
68.6
A
Width of cabinet (min.)
B
Width of cutout
25 ⁄2
64.8
Height of cutout
C*
(recommended)
415⁄16
104.9
1
D
Top of cutout to bottom
of upper cabinet door (min.)
21⁄4
5.7
E
Bottom of cutout to top
D
of lower cabinet door (min.)
11⁄2
3.8
4F Bottom of cutout to floor
191⁄4
C*
24
G Depth of cutout (min.)
B
e Recommended
junction box location
C*
C*
JMW2427D
G
10.248.9
61.0
* Will fit cutout height from 41" (104.1 cm) to 411⁄2" (105.6 cm).
ELECTRICAL REQUIREMENTS
240 volt, 40-amp fused, grounded circuit is required. A dedicated
circuit is required.
The length of conduit provided is for serviceability. Do not cut
the conduit. The junction box should be located 3" (7.6 cm)
E Drill a 1" (2.5 cm) minimum
maximum below the support surface.
diameter hole in the right rear or left rear corner of the support
surface for access to the junction box.
F
e
F
SIDE VIEW
Power Supply
Location
BACK VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8613AdZw915
G
JENN-AIR DETAILED PLANNING DIMENSIONS
®
Power Supply Location
4 of 4
27" COMBINATION MICROWAVE/WALL OVEN – FLUSH INSTALLATION
JMW2427D – 27" x 433⁄4" x 243⁄8" (depth without handles)
OPENING/CLEARANCE DIMENSIONS
MODEL #
in
cm
271⁄4
69.2
257⁄8
65.7
445⁄16
112.5
4311⁄16
110.9
45⁄8Bottom ofAcutout to floor
191⁄4
B
25
F CDepth of cutout (min.)
D
e Recommended junction box location
11.748.9
A
B
C
A
L
K
/16" (1.4 cm)
Top Cleat*
A
C
B
C
D
A
M
(1.7cm)
cm)
/ /" "(1.7
SideCleat*
Cleat*
Side
/16" (1.7 cm)
Side Cleat*
B
N/
11
16
D
e
16
B
F
e
E
E
FRONT VIEW
11
16
Side Cleat*
F
63.5
G
240 volt, 40-amp fused, grounded circuit is required. A dedicated
circuit is required.
The length of conduit provided is for serviceability. Do not cut
the conduit. The junction box should be located 3" (7.6 cm)
maximum below
the support surface. Drill a 1" (2.5 cm) minimum
1
/2" x 2" (1.3 x 5.1 cm)
diameter holeSpacer
in the
right
rear or left rear corner of the support
(entire
depth
of cutout)
surface for access
to the junction box.
P
A
F
9
Side Cleat*
1
/2" x 2" (1.3 x 5.1 cm)
/2" x 2" (1.3 x 5.1 cm)
Spacer (entire depth
Spacer (entire depth
of cutout)
of cutout)
e
Height of opening
/ " (1.4 cm)
(recommended)
Top Cleat*
ELECTRICAL
REQUIREMENTS
/ " (1.7 cm)
/ " (1.7 cm)
11
16" (1.7 cm)
SideOCleat*
1
e
Width of flush inset cutout
(min.)
H
Width of opening (min.)
I
Height of flush
inset cutout
J
K
(min.)
E
D
11 11
1616
11
D
5
/8" (1.6 cm)
Top Cleat*
9
L
JMW2427D
SIDE VIEW
F
FLUSH
E
e INSTALLATION REQUIREMENTS
e
A 25" (63.5 cm) minimum cutout depth is required.
1
These
E cm) reveal on the top,
C1 dimensions will result in a ⁄4" (0.6
a ⁄4" (0.6 cm) reveal on the sides and a 1⁄8" (0.3 cm) reveal on
the bottom of the wall oven.
The front face of the cleats and spacers will be visible and
should be treated as a finished surface.
A
B C
D
E
Power Supply
Location
F
J
F
G
TOP VIEW
Side Cleat*
H Cleat*
Side
13/8" (3.5 cm)
I
BACK VIEW
*Cleats and spacers must be recessed 13⁄8" (3.5 cm) from the front of the cabinet.
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8613AdZw915
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising