Jenn-Air | JWD3030EX | Dimension Guide | Jenn-Air JWD3030EX Dimension Guide

JENN-AIR DETAILED PLANNING DIMENSIONS
®
1 of 4
30"/27" WARMING DRAWERS
JWD3030E – 293⁄4" x 101⁄4" x 261⁄4"
JWD3027E – 263⁄4" x 101⁄4" x 261⁄4"
PRODUCT DIMENSIONS
F
A
G
MODEL #
B
A
C
B
A
B
FRONT VIEW
H
Back of
Cabinet
I
Overall width (max.)
C
Height to top of handle
Pro-Style® Stainless
F
G
in
cm
26 ⁄4
67.9
29 ⁄4
9 ⁄8
Bottom of Cutout
1
23.2
—
—
9
23.0
9
23.0
*
101⁄4
*
26.1
*
101⁄4
*
26.1
Euro-Style Stainless
3
C
Overall height (max.)
D
Width of recessed warming
drawer
281⁄4
71.8
251⁄4
64.1
E
Power
Location warming
Depth
of Cord
recessed
drawer
231⁄8
58.7
231⁄8
58.7
F
Depth with drawer
241⁄2
61.4
241⁄2
61.4
Depth with handle
Pro-Style® Stainless
267⁄8
68.1
—
—
Euro-Style Stainless
261⁄4
66.6
261⁄4
66.6
Custom panel (3⁄4"/1.9 cm)
*
*
*
*
Depth with drawer fully open
including handle
Pro-Style® Stainless
461⁄8
117.1
—
—
Euro-Style Stainless
45 ⁄2
115.6
45 ⁄2
115.6
*
*
*
*
G
H
in
cm
D 75.6
E
Custom panel ( ⁄4"/1.9 cm)
E
JWD3027E
3
3
D
JWD3030E
H
1
Custom panel ( ⁄4"/1.9 cm)
3
1
*These dimensions to be determined by the custom cabinet maker.
TOP VIEW
F
A
B
A
C
B
G
H
Back of
Cabinet
I
D
C
E
Bottom of Cutout
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8689AdZw1216
JENN-AIR DETAILED PLANNING DIMENSIONS
®
2 of 4
30"/27" WARMING DRAWERS
JWD3030E – 293⁄4" x 101⁄4" x 261⁄4"
JWD3027E – 263⁄4" x 101⁄4" x 261⁄4"
DIMENSIONS AS INSTALLED
F
B
A
B
C
G
H
Back of
Cabinet
I
D
C
E
Bottom of Cutout
SIDE VIEW
MODEL #
C
D
Height to top of drawer (max.)
Height to top of handle
Pro-Style® Stainless
Euro-Style Stainless
Custom panel (3⁄4"/1.9 cm)
Height of drawer extending below cutout
Height of recessed warming drawer
E
Height of warming drawer flange
A
B
F
G
Depth with drawer fully open including handle
Pro-Style® Stainless
Euro-Style Stainless
Custom panel (3⁄4"/1.9 cm)
Depth with handle
Pro-Style® Stainless
Euro-Style Stainless
Custom panel (3⁄4"/1.9 cm)
H
Depth with drawer
I
Depth of recessed warming drawer
JWD3030E
in
cm
101⁄4
26.1
JWD3027E
in
cm
101⁄4
26.1
85⁄8
81⁄2
21.9
21.5
—
81⁄2
—
21.5
*
⁄8
9
*
1.6
23.0
*
⁄8
9
*
1.6
23.0
97⁄8
25.0
97⁄8
25.0
461⁄8
451⁄2
117.1
115.6
—
451⁄2
—
115.6
*
*
*
*
267⁄8
261⁄4
68.1
66.6
—
261⁄4
—
66.6
*
24
*
61.0
*
24
*
61.0
231⁄8
58.8
231⁄8
58.8
5
5
*These dimensions to be determined by the custom cabinet maker.
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8689AdZw1216
JENN-AIR DETAILED PLANNING DIMENSIONS
®
3 of 4
30"/27" WARMING DRAWERS
JWD3030E – 293⁄4" x 101⁄4" x 261⁄4"
JWD3027E – 263⁄4" x 101⁄4" x 261⁄4"
OPENING/CLEARANCE DIMENSIONS
A
MODEL #
JWD3030E
JWD3027E
in
cm
in
cm
A
Width of cabinet (min.)
30
76.2
27
68.6
B
Width of cutout
28 ⁄2
72.4
25 ⁄2
64.8
C
Height between cutouts (min.)
1
2 ⁄2
6.4
1
2 ⁄2
6.4
D
Height of cutout
1
9 ⁄8
23.2
1
9 ⁄8
23.2
Bottom of cutout to floor (recommended)
41⁄4
10.8
41⁄4
10.8
Bottom of cutout to floor (min.)
1
2.5
1
2.5
F
Depth of cutout (min.)
24
61.0
24
61.0
e
Recommended outlet location
E
1
1
ELECTRICAL REQUIREMENTS
120 volt, 60 Hz, AC only, 15-amp fused, electrical circuit is required. A dedicated circuit
is recommended.
If the outlet is on the rear wall behind the warming drawer, it must be recessed and located in
the upper right-hand corner. If outlet is located in an adjacent cabinet, drill a 13⁄8" (3.5 cm)
minimum diameter hole in the side wall or support surface to access the power
Back ofsupply
Cabinetcord.
C
e
Support surface must be solid, level and flush with the bottom of the cabinet cutout. The
warming drawer must be leveled before completing installation.
D
B
LOCATION REQUIREMENTS
C
e
F
D
E
FRONT VIEW
Back of Cabinet
A
F
SIDE BVIEW
C
Power Cord Location
BACK VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8689AdZw1216
JENN-AIR DETAILED PLANNING DIMENSIONS
®
4 of 4
30"/27" WARMING DRAWERS – FLUSH INSTALLATION
JWD3030E – 293⁄4" x 101⁄4" x 241⁄2" (depth without handle)
JWD3027E – 263⁄4" x 101⁄4" x 241⁄2" (depth without handle)
OPENING/CLEARANCE DIMENSIONS
MODEL #
JWD3030E
JWD3027E
in
cm
in
cm
A
Width of flush inset cutout (min.)
30 ⁄4
76.8
27 ⁄4
69.2
B
Width of opening (min.)
281⁄4
71.8
251⁄4
64.1
C
Height between cutouts (min.)
21⁄2
6.4
21⁄2
6.4
D
Height of opening (min.)
1
9 ⁄8
23.2
1
9 ⁄8
23.2
E
Height of flush inset cutout (min.)
10 ⁄4
27.3
10 ⁄4
27.3
Bottom of cutout to floor (recommended)
1
8 ⁄4
21.0
1
8 ⁄4
21.0
Bottom of cutout to floor (min.)
5
12.7
5
12.7
G
Depth of cutout (min.)
25
63.5
25
63.5
e
Recommended outlet location
F
1
3
1
3
ELECTRICAL REQUIREMENTS
A
D
A
B
120 volt, 60 Hz, AC only, 15-amp fused, electrical circuit is required. A dedicated circuit
is recommended.
If the outlet is on the rear wall behind the warming drawer, it must be recessed and located in
the upper right-hand corner. If outlet is located in an adjacent cabinet, drill a 13⁄8" (3.5 cm)
Back of supply
Cabinet cord.
minimum diameter hole in the side wall or support surface to access the power
B
1" (2.5 cm)C
Side Cleats*
1" (2.5 cm)
7
/8" (2.2 cm)
Side Cleats*
e
7
Platform*
E
/8" (2.2 cm)
Platform*
D
C
e
E
Back of Cabinet
LOCATION REQUIREMENTS
Support surface must be solid, level and flush with the bottom of the cabinet cutout.
The warming drawer must be leveled before completing installation.
FLUSH INSTALLATION REQUIREMENTS G
G
F
F
A 25" (63.5 cm) minimum cutout depth is required.
These dimensions will result in a 1⁄4" (0.6 cm) reveal on all sides of the warming drawer.
The front face of the cleats and platforms will be visible and should be treated as a finished surface.
FRONT VIEW
Back of Cabinet
A
A
G
G
B
B
SIDE VIEW
C
C
Side Cleat*
Side Cleat*
Side Cleat*
15/8" (4.1 cm)
G
Side Cleat*
15/8" (4.1 cm)
TOP VIEW
Power Cord Location
*Cleats and platform must be recessed 15⁄8" (4.1 cm)
from the front of the cabinet.
BACK VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately
UL, CUL or CSA approved.
G
8689AdZw1216
Download PDF

advertising