Bertazzoni | PROF304INSXT | Use&Care Manual Induction and Self Clean Oven Ranges | Bertazzoni PROF304INSXT Use&Care Manual Induction and Self Clean Oven Ranges

Bertazzoni PROF304INSXT Use&Care Manual Induction and Self Clean Oven Ranges
/ From the desk of the President
From the desk of the President
Dear new owner of a Bertazzoni,
I want to thank you for choosing one of our beautiful appliances for your
home. We know that you have many brands and products to choose
from, and we are thrilled that you have decided to take one of our
products into your home.
We take as much pride in making our ranges as we hope you will in owning them. My family started manufacturing cooking appliances in 1882.
Each of our products brings together Italian design and superior appliance technology. While we can not replace your unique talent at cooking
delicious recipes for yourself, your family and your friends, we try our
best to make cooking easier, more effective and more fun. And, at the
same time, we strive to make your kitchen look
Our appliances are designed according to the strictest safety and performance standard for the European and the North American market.
We follow the most advanced manufacturing techniques. Each appliance
leaves the factory after thorough quality inspection and testing. Our importers and our service partners are ready to answer any questions you
may have regarding how to use and care for your Bertazzoni.
This manual will help you learn to use the product in the safest and most
effective way and care for it so that it will give you the highest satisfaction
for years to come.
/ Table of contents
WARNINGS ___________________________________________________________________
WORKTOP AND KNOBS LAYOUT ________________________________________________
INDUCTION COOKTOP __________________________________________________________
Cooking with induction ________________________________________________________
Turning on the induction element ________________________________________________
Using special functions ________________________________________________________
Suitable induction pans ________________________________________________________
Induction dimension __________________________________________________________
ELECTRIC OVEN _______________________________________________________________
Shelves positions _____________________________________________________________
Cooling fan __________________________________________________________________
Preheating the oven ___________________________________________________________
Using the oven _______________________________________________________________
Oven cooking modes __________________________________________________________
Special functions _____________________________________________________________
Condensation _______________________________________________________________
Getting the best results ________________________________________________________
Oven cooking recommendations ________________________________________________
Broiling recommendations _____________________________________________________
Troubleshooting common problems with oven cooking _____________________________
Oven temperature indicator _____________________________________________________
Self cleaning ________________________________________________________________
Telescopic glides ____________________________________________________________
KEEPING YOUR BERTAZZONI CLEAN _____________________________________________
SIMPLE MAINTENANCE _________________________________________________________
Replacing oven lights _________________________________________________________
Cleaning inside glass door _____________________________________________________
TROUBLESHOOTING ___________________________________________________________
TWO YEAR LIMITED WARRANTY _________________________________________________
/ Warnings
Warning and Important Safety Instructions appearing in this manual are not meant to cover all
possible conditions and situations that may occur.
Common sense, caution, and care must be exercised when installing, maintaining, or operating
the appliance.
Read and follow all instructions before using
this appliance to prevent the potential risk of
fire, electric shock, personal injury or damage
to the appliance as a result of improper usage
of the appliance. Use appliance only for its intended purpose as described in this manual.
Save this Manual for local electrical inspector’s
use. Read and save these instructions for future
reference. Observe all governing codes, ordinances and regulations.
A certified technician is required for any adjustments or conversions to Natural or LP gas.
To Prevent Fire or Smoke Damage
• Be sure all packing materials are removed from
the appliance before operating it.
• Never let clothing, potholders, or other flam•
To avoid risk of property damage, personal injury
or death; follow information in this manual exactly to prevent a fire or explosion. DO NOT store
or use gasoline or other flammable vapors and
liquids nearbythis or any appliance.
What to do if you smell gas:
Do not light any appliance. Do not touch any
electrical switch. Do not use any phone in your
building. Immediately call your gas supplier
from a neighbor’s phone. Follow the gas supplier’s instructions. If you cannot reach your
gas supplier, call the fire department.
NOTE: Installation and service must be performed
by a qualified installer, service agency or the gas
In Massachusetts:
All gas products must be installed by a “Massachusetts” licensed plumber or gasfitter. A “T” handle type manual gas valve must be installed in the
gas line connected to this appliance.
To ensure proper and safe operation: Appliance
must be properly installed and grounded by a
qualified technician. DO NOT attempt to adjust,
repair, service, or replace any part of your appliance unless it is specifically recommended in this
manual. All other servicing should be referred to a
qualified servicer. Have the installer show you the
location of the gas shut-off valve and how to shut
it off in an emergency.
mable materials come in contact with or too close to any element, top burner or burner grate
until it has cooled.
If appliance is installed near a window, proper
precautions should be taken to prevent curtains
from blowing over burners.
Never leave any items on the cooktop. The hot
air from the vent may ignite flammable items
and may increase pressure in closed containers which may cause them to burst.
Many aerosol-type spray cans are EXPLOSIVE when exposed to heat and may be highly
flammable. Avoid their use or storage near an
In Case of Fire
Turn off appliance and ventilation hood to avoid
spreading the flame. Extinguish flame then turn
on hood to remove smoke and odor.
Cooktop: Smother fire or flame in a pan with a
lid or cookie sheet.
NEVER pick up or move a flaming pan.
Oven: Smother fire or flame by closing the oven
door. DO NOT use water on grease fires. Use
baking soda, a dry chemical or foamtype extinguisher to smother fire or flame, if available, a
multipurpose dry chemical or foam type extinguisher.
Child Safety
• NEVER leave children alone or unsupervised
near the appliance when it is in use or is still
NEVER allow children to sit or stand on any
part of the appliance as they could be injured
or burned.
DO NOT store items of interest to children over
the unit. Children climbing to reach those items
could be seriously injured.
/ Warnings
Cooking Safety
• Once the unit has been installed as outlined in
the Installation Instructions, it is important that
the fresh air supply is not obstructed. The use
of a gas cooking appliance results in the production of heat and moisture in the room in which it is installed.
Ensure that the kitchen is well-ventilated. Keep
natural venting holes open or install a mechanical ventilation device. Prolonged or intensive use of the appliance may call for additional
(such as opening a window) or more effective
ventilation (such as increasing the level of a
mechanical ventilation if present).
NEVER use aluminum foil to cover oven racks
or oven bottom. This could result in risk of
electric shock, fire, or damage to the appliance.
Use foil only as directed in this guide.
To eliminate the hazard of reaching over hot
surface burners, cabinet storage should not be
provided directly above a unit. Temperatures
may be unsafe for some items, such as volatile
liquids, cleaners or aerosol sprays.
ALWAYS place a pan on a surface burner before turning it on. Be sure you know which knob
controls which surface burner. Make sure the
correct burner is turned on and that the burner has ignited. When cooking is completed,
turn burner off before removing pan to prevent
exposure to burner flame.
ALWAYS adjust surface burner flame so that it
does not extend beyond the bottom edge of the
pan. An excessive flame is hazardous, wastes
energy and may damage the appliance, pan or
cabinets above the appliance. This is based on
safety considerations.
NEVER leave a surface cooking operation
unattended especially when using a high heat
setting or when deep fat frying. Boilovers cause smoking and greasy spillovers may ignite.
Clean up greasy spills as soon as possible. DO
NOT use high heat for extended cooking operations.
DO NOT heat unopened food containers, build up of pressure may cause the container to
explode and result in injury.
ALWAYS let quantities of hot fat used for deep
fat frying cool before attempting to move or
NEVER wear garments made of flammable
material or loose fitting or long-sleeved apparel while cooking. Clothing may ignite or catch
utensil handles. DO NOT drape towels or materials on oven door handles. These items could
ignite and cause burns.
ALWAYS place oven racks in the desired posi-
tions while oven is cool. Slide oven rack out to
add or remove food, using dry, sturdy potholders.
ALWAYS avoid reaching into the oven to add or
remove food. If a rack must be moved while hot,
use a dry pot-holder.
ALWAYS turn the oven off at the end of cooking.
Use care when opening the oven door. Let hot
air or steam escape before moving or replacing
DO NOT cook directly on the oven bottom.
This could result in damage to your appliance.
Always use the oven racks when cooking in the
Do not connect any appliances to the plugs
above or near to the induction cooktop; connection cable insulation can melt if in contact
with heat, and this may result in an injury and
a property damage.
Recommended Utensils
• Use pans with flat bottoms and handles that
are easily grasped and stay cool. Avoid using
unstable, warped, easily tipped or loose-handled pans. Also avoid using pans, especially
small pans, with heavy handles as they could
be unstable and easily tip. Pans that are heavy
to move when filled with food may also be hazardous.
Be sure utensil is large enough to properly contain food and avoid boilovers. Pan size is particularly important in deep fat frying. Be sure pan
will accommodate the volume of food that is to
be added as well as the bubble action of fat.
To minimize burns, ignition of flammable materials and spillage due to unintentional contact
with the utensil, DO NOT extend handles over
adjacent surface burners. ALWAYS turn pan
handles toward the side or back of the appliance, not out into the room where they are easily
hit or reached by small children.
NEVER let a pan boil dry as this could damage
the utensil and the appliance.
Follow the manufacturer’s directions when
using oven cooking bags.
Only certain types of glass, glass/ceramic, ceramic or glazed utensils are suitable for rangetop surface or oven usage without breaking due
to the sudden change in temperature. Follow
manufacturer’s instructions when using glass.
/ Warnings
Induction Cooking Surfaces
• Surface areas on or adjacent to the unit may be
hot enough to cause burns. Do not touch the
cooking area as long as the light indicating residual heat on the glass-ceramic cooktop area,
is “on”; this indicates that the temperature in the
relative area is still high.
DO NOT COOK ON BROKEN COOKING SURFACE – If cooking surface should break, cleaning solutions and spillovers may penetrate
the broken cooking surface and create a risk
of electric shock. Contact a qualified technician
Keep a close eye on children because they are
unlikely to see the residual heat warning lights.
The cooking zones are still very hot for some
time after use, even if they are switched off.
Make sure that children never touch them.
NEVER use aluminum foil to to hold the food
while cooking on a glass-ceramic cooktop area.
Never place pan with bottoms which are not
perfectly flat and smooth on the cooktop area.
If you drop a heavy pot on your cooktop area it
will not break. On the contrary, if a hard object,
such as the salt shaker or the spice bottle strikes
the edge or the corner of the cooktop area, the
cooktop area may break.
Never use the glass-ceramic cooktop area as
support surface.
Only use cleaning products made specifically
for ceramic glass cooking surfaces.
Metal items such as cutlery or lids must never
be placed on the surface of the cooktop area
since they may become hot.
Radio Interference - Induction Ranges
This unit generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this unit does cause harmful interference to radio or television reception, which
can be determined by turning the unit off and
on, the user is encouraged to try to correct the
interference by one or more of the following
• Reorient or relocate the receiving antenna
• Increase the distance between the unit and receiver
• Connect the unit into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
Oven Heating Elements
• NEVER touch oven bake and broil burner areas
or interior surfaces of oven.
• Bake and broil burners may be hot even though
they are dark in color. Areas near burners and
interior surfaces of an oven may become hot
enough to cause burns.
During and after use, DO NOT touch or let
clothing or other flammable materials contact
heating elements, areas near elements, or interior surfaces of oven until they have had sufficient time to cool. Other surfaces of the oven
may become hot enough to cause burns, such
as the oven vent opening, the surface near the
vent opening, and the oven door window.
Cleaning Safety
• Turn off all controls and wait for appliance parts
to cool before touching or cleaning them. DO
NOT touch the burner grates or surrounding
areas until they have had sufficient time to cool.
Clean the range with caution. Avoid steam
burns; DO NOT use a wet sponge or cloth to
clean the range while it is hot. Some cleaners
produce noxious fumes if applied to a hot surface. Follow directions provided by the cleaner
DO NOT clean, rub, damage, move or remove
the door gasket. It is essential for a good seal
during baking. If the gasket becomes worn or
excessively soiled with food particles, replace
gasket to assure a tight seal.
Power failure warning
Due to safety considerations and the possibility of
personal injury in attempting to light and extinguish the oven burners, the grill and the oven burner
should not be used during a power failure. The
oven control knob should always remain in the
“OFF” position during a power failure.
NEVER use appliance as a space heater to heat
or warm a room to prevent potential hazard to the
user and damage to the appliance. Also, DO
NOT use the rangetop or oven as a storage area
for food or cooking utensils.
/ Warnings
Electrical shock hazard
Make sure all controls are OFF and oven is COOL
before cleaning. Failure to do so can result in
burns or electrical shock.
DO NOT touch a hot oven light bulb with a damp
cloth as the bulb could break. Should the bulb
break, disconnect power to the appliance before
removing bulb to avoid electrical shock.
NEVER cover any slots, holes or passages in the
oven bottom or cover an entire rack with materials
such as aluminum foil.Doing so blocks air flow
through the oven and may cause carbon monoxide poisoning. Aluminum foil linings may also trap
heat, causing a fire hazard.
Burn hazard
The oven door, especially the glass, can get hot.
DO NOT touch the oven door glass!
Warning-tipping hazard
Children and adults can tip over the range if it has
not been secured.This may lead to fatal injuries.
To reduce the risk of the appliance tipping, it must
be secured and connected using the anti-tip device according to the installation instructions.
Re-engage the anti-tip device if the range is moved.
Do not operate the range without te anti-tipdevice
in place and engaged. Do not use the range if the
anti-tip device has not been properly installed and
engaged. See installation instructions for details.
Failure to observe the information contained in the installation instructions can
lead to serious or fatal injuries for children
and adults.
/ Worktop and knobs layout
Heating element
Oven functions selector
Oven thermostat
Left front induction element
Left rear induction element
Right front induction element
Right rear induction element
Heating element
Oven functions selector
Oven thermostat
Left front induction element
Left rear induction element
Central induction element
Right front induction element
Right rear induction element
/ Induction cooktop
Underneath each cooking zone there is a coil called an inductor. The inductor generates a variable
magnetic field using electric power. When a pan is
placed inside this magnetic field, the highfrequency current radiates directly on the bottom of the
pan and produce the heat needed to cook.
After use the display can show the symbol ‘H’ if
there is residual heat. The symbol ‘H’ go out when
the temperature drops to below about 140°F/60°
The symbol above each knob indicates which element that knob controls.
The operation power is regulated through the
knob and is shown by a display on the cooktop
To turn on the heating zone, press in the control
knob (Fig.14A-14B) and turn it clockwise. Settings
range from a minimum of 1 to a maximum of 9.
se, option “A” is automatically deactivated.
P - Power Mode.
The power mode allows the user to operate each
heating zone continuously at the maximum power
for a time of no more than 10 minutes. This mode
can be used to bring a large amount of water to
the boil in a hurry, or to turn up the heat under
Turn the knob clockwise and set heating level
to 9, then use the knob to set the “P” position
and release it.
The symbol “P” will appear on the corresponding zone display.
After 10 minutes, the power will be reduced automatically to 9 and the “P” will disappear.
The power mode can be turned off at any time
by reducing the heating level. If a pan is removed
from the cooking zone while the power function is
on, the function is switched off.
- Holding Mode.
The holding mode keeps the temperature of the
bottoms of pans at about 160°F/70°C . This allows
foods to be heated gently and kept hot with optimal energy consumption. Holding mode can be
kept in operation for up to 2 hours.
The holding mode is
and is indicated by the
relevant symbol on the cooking zones.
∏ - Bridge Mode.
The bridge mode allows to use the 2 right-side
cooking zones as a single cooking zone. Power
Mode is not allowed when the zones are operated
in Bridge mode.
A - Heating Accelerator mode.
The Heating Accelerator mode allows each zone
to be operated at peak power for a time proportional to the heating power selected.
Turn the knob anti-clockwise, select setting “A”
and then release. The letter “A” will appear on
the display on the cooktop area
After 3 seconds, you may select the heating
setting of your choice. Once a setting between
1 and 9 has been selected, “A” and the chosen
setting will flashin sequence on the display.
While the heating accelerator is in operation, the
heating level can be increased at any time. The
“full power” time will be modified accordingly. If the
power is reduced by turning the knob anticlockwi-
• Rotate both knobs, rear right and front right, at
the same time in the P position and keep the
knobs in that position.
The ∏ symbol will blink in the display, then return to the power level.
To control the bridge power level, use the knob
4 (front right zone). If you turn knob 3 (rear right
zone) the display shows a horizontal segment
and the bridge function ends.
/ Induction cooktop
L - Child lock function.
When not in use, the cooktop area can be “locked
out” to prevent children from accidentally switching it on.
Use only vessels specially designed for induction
cooking, with thick, completely flat bottom. If these
are not available, the pans used must not have a
round (concave or convex) bottom.
With the cooking zones off, turn the knobs of
zones 1 and 2 to the left simultaneously until
‘’L’’ appear on the power display and then release the knobs.
To deactivate it, repeat the same procedure:
the cooking zone displays will stop displaying
the ‘’L’’, indicating that the cooking zone LOCK
has been deactivated.
- Pan detection.
Each cooking zone is equipped with a “pan
detection” device, which ensures that cooking
cannot start unless a suitable pan is present
on the cooking zone and properly positioned.
If the user attempts to switch on the cooking
zone with the pan not positioned properly or
with a pan which is not of suitable material,
symbol will appear a few seconds after
the zone is switched on to warn the user that
an error has been made.
H - Residual heat.
Each cooking zone is equipped with a device which warns of residual heat. After any cooking zone
is switched off, a flashing ‘H’ may appear on the
display, warning that the cooking zone is stil very
Cooking can be restarted while the ‘H’ is flashing.
Induction with most pans of suitable material.
The bottom of the pan must be iron or steel/iron
to generate the magnetic field necessary for the
heating process. Pots made of glass, porcelain,
ceramic are not suitable. Pots made with steel,
aluminium or copper without magnetic bottom will
also not work.
Most suitable pans are marked for use with induction. To check whether a pan is suitable, simply place a magnet close to its bottom: if the magnet sicks to the bottom of the pan, the pan is
suitable for induction cooking. If you don’t have a
magnet handy, place a small of water in the pan,
place the pan on any cooking zone and switch it
on. If the symbol
appears on the display, the
pan is not suitable.
The pans must have certain minimum diameter
to ensure optimal operation. Pans larger than the
cooking zones can also be used: make sure that
the bottom of the pan does not touch other cooking zones and that it is always centered over
the inductor.
/ Induction cooktop
Diam. (mm)
Ø 50 mm
(and Griddle)
Ø 70mm
Dual inner/outer
Ø 43/140 mm
Diam. of pan
Ø 95 mm
Use with smaller pans for boiling and simmering and the
preparation of sauces.
Use for normal frying and boiling in medium and small pans.
Use with large and medium pans of water for frying and rapid
Use with woks, griddle’s and frying pans or for large pans and
rapid boiling.
• Always place your pan in such a way that its
center is aligned with the centre of the element.
• Pick-up your cookware when moving them
around. Do not slide them and avoid excessive
rubbing of the top, as this may leave scratches
on the glass surface.
Never leave an empty pot/pan on an induction
heating element, even when the element is turned OFF.
Only use maximum power for boiling and frying.
Avoid preheating your non-stick pans (e.g. with
teflon coating) at maximum heat.
Avoid storing solid and heavy items in the cabinets above your cooktop.They may accidentally
be dropped and damage the glass top.
Place extra care to avoid spilling sugar or
sweet mixtures onto the cooktop area during cooking, and avoid materials or substances which might melt (plastic or aluminium foil) on it. If this should occur, turn the
heating off immediately and clean with the
scraper supplied while the cooking zone is
still warm. If the ceramic cooktop area is not
cleaned immediately, residue may form which may not be removed once the cooktop
area has cooled.
/ Electric oven
When using the oven for the first time it should be
operated for 15-30 minutes at a temperature of
about 500°F/260°C without cooking anything inside in order to eliminate any moisture and odours
from the internal insulation.
The oven is equipped with 4 heating elements,
used alone or in combination to create different
cooking modes:
Upper bake element
Lower bake element
Broil element
Convection element
The temperature setting and cooking times can
vary slightly from one oven to another. It is possible that recipes and cooking times need to be
adjust accordingly.
Shelves are mounted on the appropriate guides
situated on the sides of the oven compartment.
Insert the shelf between top and bottom guide in
any of the 7 positions indicated.
Heat from upper and lower element
Use this setting for baking, roasting, and casseroles on a single rack.
Standard bake: level 3 or 4
Taller items: level 3
Pies: level 2 or 3 to ensure the bottom of the
crust is done without over-browning the top.
Large cuts of meat or poultry: level 2.
The range is equipped with a cooling fan designed to prevent the control panel and knobs from
overheating. The cooling fan will operate when the
oven temperature groves up. It will turn off when
the temperature decreases.
NOTE: It is normal for the cooling process to push
heated air out into the room when the oven is on.
Most cooking times in recipes are intended for a
preheated oven and require that the oven already
be at the set temperature before placing food in
the oven. Preheating time depends on the temperature setting and the number of racks in the oven.
1. Place rack in desired position and shut the door.
2. Select the oven function with the dedicated function knob. The light in the cavity will turn on.
3. Set the desired temperature with the dedicated
selector knob.
The oven will start PRE-HEATING in a few second showing the progress in the gauge. The end
of pre-heating will be confirmed with a tone. Place
the food in the oven when the desired temperature has been reached.
Convection bake
Heat from upper and lower bake element and air
flow convection with fan.
Use this setting to bake and roast different foods
at the same time with no taste transfer. The fan
circulates the hot air around the oven for uniform
cooking of larger quantities of food. Use for roasting vegetables, meat and poultry, or baked fish.
This function is the best one for cooking frozen
products and breaded/battered chicken or fish.
It may be used for cakes, cookies, biscuits and
other foods on multiple racks.
Use the same rack position as BAKE. When using
2 racks, use level 3 and 5.
Heat from lower bake element and circular element and airflow convection with fan.
Use for cooking pizza, pastry or flat breads to get
a perfectly cooked base.
Use level 3 or level 2 to ensure the bottom of the
crust is done.
/ Electric oven
Heat from the broil element only
The BROIL setting creates intense heat from the
top of the cavity. Its use is recommended for no
longer than 15 mins. The broil mode is effective
when food is placed on upper racks.
Beef steaks, ground meat patties, and lamb
chops 1 inch or less: level 6.
Meat 1 inches or more thick, fish, poultry, pork
chops, ham steaks 1 inch or more: level 5.
Browning food: level 6
Convection broil
Heat from broil element and air flow convection
with fan.
Use this setting for browning and cooking evenly
food on all sides, including bottom. Also recommended for food that is too delicate to turn over
such as fish. The fan circulates hot air around the
food helping to cook it all the way through. The degree of browning on each side might be different.
The conv broil mode must be used on one rack,
• sausages and chicken portions: level 5 or 6
• foods with high water content such as bacon
Heat from lower element and air flow convection
with fan.
Use this setting for dehydrate food, flowers, vegetables.
Turn the temperature knob to 100°F
Use level 2 or 3
Heat from lower element.
Use this settint to maintain the warm, needed for
proofing yeast. It is best to start with a cool oven
when using the proofing function.
Turn the temperature knob to 150°F
Do not open the oven door unnecessarily
Use level 2 or 3
Heat from lower element.
Use this settint to keep warm the food at the temperature of 170°F(77°C).
Turn the temperature knob to 200°F
Use level 2 or 3
and chops: level 5 or 6 (door closed 400°F )
Heat from the convection element and airflow
convection with fan.
Use this mode for most recipes being careful at
calibrating the time –less time is usually required
to reach the desired result when using convection.
The temperature is kept uniform throughout the
oven, which is particularly suitable for baking on
several levels or for batch cooking.
• Single rack: use the same rack position as
• 2 racks: use level 3 and 5
• 3 racks : use level 2 ,4, 6
Heat from up and lower element.
Use this settint for cleaning the oven with a pyrolitic self-cleaning cycle.
Turn the temperature knob to clean
(see chapter SELF-CLEANING)
/ Electric oven
It is normal for a certain amount of moisture to
evaporate from the food during any cooking process. The amount depends on the moisture content of the food. The moisture will condense on
any surface cooler than the inside of the oven,
such as the control panel.
the pans and the oven walls so heat can circulate around each pan.
To keep the oven as clean as possible, cook
meat on a pan and not directly on the racks.
Cooking will continue with residual heat. remove the dish from the oven immediately to avoid
Using aluminum foil in the oven
Foil can be used to cover food in the oven but this
should not come into close proximity with the oven
elements. Foil should not be used to line the oven
cavity or grill pan. This can cause overheating,
buckling and cracking of the enamel surfaces.
• Minimize opening and closing the oven door
during operation.
• Use the rack position recommended by the recipe and fine-tune with personal experience.
• Use the bakeware recommended in the recipe.
• Store the broiler pan(s) outside the oven. An ex•
tra pan without food will impact browning and
For tender, golden brown crusts, use light
non-stick/anodized or shiny metal pans.
For brown crisp crusts, use dark non-stick/anodized or dark, dull metal pans or glass bakeware. These may require lowering the bake temperature 25°F (14°C).
Allow at least 1” (25.4 mm) of space between
Layer Cakes
Sheet Cakes
Bunt Cakes
Brownies or Bar Cookies
Quick Bread
Fruit Pies
Fruit Cobblers
Yeast Bread, Loaves
Dinner Rolls
Cinnamon Rolls
Yeast Cotter and Cake
Pan size
Control temperature
Total suggested
cooking time
12”x15” Cookie Sheet
8”or 9” Round
9”x13” Pan
12 Cup
9”x9” Pan
12”x15” Cookie Sheet
8”x4” Loaf Pan
12 cup Muffin Pan
9” Diameter
9”x9” Pan
8”x4” Loaf Pan
9”x13” Pan
9”x13” Pan
12”x15” Cookie Sheet
425°F or Package Directions
8 to 12 minutes
25 to 35 minutes
30 to 40 minutes
60 to 75 minutes
20 to 25 minutes
10 to 15 minutes
55 to 70 minutes
14 to 19 minutes
35 to 45 minutes
25 to 30 minutes
25 to 30 minutes
12 to 18 minutes
25 to 30 minutes
20 to 30 minutes
/ Electric oven
Food item
Control temperature
setting selector
cooking time
Special instructions
and tips
Ground Beef Patties, ½” thick
T-Bone Steak
Flank Steak
Eye of Round Roast
500°F fixed temperature setting
15 to 20 minutes
Broil until no pink in center
500°F fixed temperature setting
500°F fixed temperature setting
12 to 20 minutes
12 to 20 minutes
20 to 25 min/lb
PORK Loin Roast
Boneless Skinless
Chicken Breasts
Chicken Thighs
500°F fixed temperature setting
20 to 25 min/lb
20 to 25 minutes
Time depends on rareness of steak
Rare to Medium Rare
Small roasts take more minutes
per pound; reduce time by using
Convection Bake
Cook until juices are clear
Cook until juices are clear
500°F fixed temperature setting
25 to 30 minutes
Half Chickens
500°F fixed temperature setting
30 to 45 minutes
Roast Chicken
75 to 90 minutes
20 to 25 min/lb
Remove skin; Cook until juices are
Turn with tongs; Cook until juices
are clear
Do not stuff; reduce time by using
Convection Bake
Do not stuff; reduce time by using
Convection Bake
Cakes burned on the sides or not
done in center
Cakes crack on top
Food too brown on bottom
Food too brown on top
Cookies too flat
Pies burned around edges
Pies too light on top
Oven too hot
Wrong pan size
Batter too thick
Oven too hot
Wrong pan size
Oven door opened too often
Incorrect rack position
Wrong bake setting
Reduce temperature
Use recommended pan size
Follow recipe or add liquid
Reduce temperature
Use recommended pan size
Use door window to check food
Use recommended rack position
Adjust to conventional or convection setting as
Use recommended rack position
Allow oven to preheat
Allow sheet to cool between batches
Reduce temperature
Allow oven to preheat
Increase temperature
Allow oven to preheat
Incorrect rack position
Oven not preheated
Hot cookie sheet
Oven too hot
Oven not preheated
Oven not hot enough
Oven not preheated
/ Electric oven
End delay mode:
The range is equipped with a device to indicate
the temperature in the middle of the oven. This let
you check the temperature inside the oven and
adjust food cooking temperatures more accurately.
When the oven is turned on, the heating elements will start working at maximum and the thermometer dial will start to move towards the set
temperature. Heat is optimally distributed inside
the oven when the thermometer dial has stopped
and pre-heating is finisched. When the oven is turned off, the temperature on the thermometer will
slowly drop until it reaches room temperature.
the gauge is for reference only.
1. Press MODE.
2. Use the “<” and “>” buttons to select DELAY/
3. Press MODE.
4. Press the “<” and “>” buttons to select the desired cooking time and press MODE
5. afhter 3 seconds will appeare the end of cooking time, press M to start cooking, press <
or > buttons to set a different end of cooking
time (in this function the set time is the end of
cooking) than press MODE to confim.
6. set function ant temperature with the konbs.
7. If the delay start is settled the display will show
the cooking start time otherwise the oven switch on
8. Once the set end of cooking time is finished, a
sound will be heard and the oven automatically
switches off.
Note: to change settled timerestart from point 1.
The Gauge is equipped with a digital interface
that show the settled functions and manage the
cooking time.
Set de gauge:
1. Press MODE.
2. Use the “<” and “>” buttons to select SET-UP
3. Press MODE.
4. Press the “<” and “>” buttons to select desired
funtions: language, 12h/24h, time, volume,
•Language press “<” and “>” buttons to select desired language and press MODE to confirm
•12h/24h press “<” and “>” buttons to select desired clock indication and press MODE to confirm
•Time press “<” and “>” buttons to select desired
time (keep on press the button to fast forwording)
and press MODE to confirm
•volume press “<” and “>” buttons to select desired volume and press MODE to confirm
• showroom don not use this fnction, is only for
1. Press MODE.
2. Use the “<” and “>” buttons to select TIMER
3. Press MODE.
4. Press the “<” and “>” buttons to select the desi
red time and press MODE
5. The countdown start immediately and the display will show the remaining time
8. Once the set time is finished, a sound will be
Note: to change settled timerestart from point 1.
This function is only a minute minder and do not
stop the cooking
Meat probe
The meat probe allows you more control over
how your
foods are cooked by automatically disabling the specified cooking mode when a
dish's desired temperature, defined by the cook,
has been reached. The probe expresses the current temperature of the meat as it cooks.
Programming the meat probe
1. Insert the food probe in the item to be cooked.
For best results, insert the probe as close as
possible to the center of the item and make
sure it is not in contact with bones or fat. Improper placement of the probe could shut the oven
off too early and result in uncooked food. With
poultry, make sure the probe does not rest in a
6 set function ant temperature with the konbs.
2. Press MODE.
3. Use the “<” and “>” buttons to select MEAT
/ Electric oven
4. Press MODE.
5. Press the “<" and “>” buttons to select the desired cooking temperature and press MODE
6. Insert the items to be cooked on the oven than
connect the probe jack to the port located in the
upper left side of the oven cavity.
7. The display will show the current temperature
of the meata nt the settle temperature.
8. when the temperature settled will be reached a
sound will be heard and the oven automatically
switches off.
Once a time function is settle the other time functions are not available.
According with recipe the oven can be pre-heat
before use any time functions.
Children should not be left alone or unattended in
an area where appliances are in use.
• During the Self-Clean cycle, exterior surfaces
may become hotter than usual. Parts of the appliance may become potentially harmful to children, and to persons who lack adult knowledge of
appliances and lack adult reactions to potentially
harmful conditions.
Keep these individuals away during self-clean and
while the appliance is in use.
• The elimination of soil during self-cleaning may
facilitate the emission of small amounts of chemicals or other substances that may be harmful
upon sufficient exposure. To minimize exposure
to these
substances, provide good ventilation with an open
window, or use a ventilation fan or hood.
• Keep pet birds out of the kitchen or other roomswhere kitchen fumes could reach them. During selfclean, fumes are released that may be
harmful to birds.
Electric oven
When set to the CLEAN mode, the oven reaches
a high temperature of approximately 840°F/450°C
that burns off all food residues from the inside of
the oven.
When the oven is set for CLEAN, the cooktop burners may be used.
It is common to see smoke and/or flames during
the clean cycle, depending on the content and
amount of greasy residues in the oven. If the flame persists, turn off the oven and allow it to cool
before opening the door and wipe off the excessive residues.
At the end of the CLEAN cycle, some grey ash or
burned residue may remain inside the oven. This
is a mineral deposit that does not burn or melt.
The amount of ash depends on how heavily soiled
the oven was before it was cleaned. It is easily
removed, when the oven is cold, using a damp
paper towel, sponge, or cloth.
Wipe off any smoke residue that remains on the
front frame with a cleaning product suitable for
oven cavity cleaning. If stains remain, use a mild
liquid cleaner. The amount of smoke stain is directly related to the amount of food residues in
the oven cavity before the start of the self-cleaning cycle.
/ Electric oven
Before Self Cleaning the Oven
Wipe out large spillages, grease and any loose
soil that can be easily removed. Remove any soil
that is outside the door seal area. This appliance
is designed to clean the oven interior and the portion of the door that faces the oven cavity. The outer edges of the door and the oven cavity are not
in the cleaning zone. Wipe this area clean before
starting the self-cleaning cycle.
Remove all utensils and racks.
Make sure the light bulbs and glass covers are in
Turn on the ventilator hood above the range and
leave it on until the self-clean cycle is completed
(red indicator light turning off).
Remove racks
1 Locate the two hooks at the bottom of the rack
and gently pull down contemporary the two
2 Pull the rack away from the oven side and
remove pulling up the upper hooks of the racks
from the side of the oven.
3 Remove the rack from the oven.
At the end of the cycle turn both the oven mode
selectors and the temperature to the OFF position.
The interior of the oven will still be at baking temperatures when the automatic lock cycles to its
open position and the oven door can be opened.
Door Lock
When the CLEAN cycle starts, the automatic door
lock cycle begins. Check the door to confirm that it
is locked. You can stop the self-cleaning cycle by
turning the function selector to the OFF posi¬tion.
NOTE: make sure that the oven door is locked at
the beginning of the self-cleaning cycle.
To Set/Start Self-Clean cycle
1.Check that the oven cavity is completely empty
and the oven door correctly closed.
2.Turn the function control knob to CLEAN.
3.Turn the temperature control knob to CLEAN.
After these 3 steps the cooling fans will activate,
the oven door will lock automatically after 60 seconds and both the pre-heating and clean light indicators will turn on.
As soon as clean light turns on check to ensure
that the oven door is correctly locked.
At the End of the Self-Clean cycle
The self-cleaning cycle lasts approximately 2-2
¼ hours; 30-40 minutes for pre-heating the oven
(pre-heating and clean light both on), 60 minutes
for actual cleaning (heating and clean light both
on), 30-35 minutes for cool-down (only clean light
When the CLEAN light is turned off the oven
door is unlocked. This will happen when the oven
temperature drops below 460-500°F/240-260°C
/ Electric oven
The telescopic glides fit any shelf level and work
with the wire shelves provided as standard equipment.
Fitting the glides
• Locate the two spring clips at the front and back
of the glides.
• Locate the pin on the glide that indicates the
• Choose the right level and position the telescopic glide near the upper wire.
• Gently insert the front spring clip on the glide.
• Insert the rear spring clip on the glide.
• Pull and push each glide to ensure the correct
installation and smooth operation.
• Extract both glides to the fully extended position
and place the shelf over them, making sure it’s
accurately placed between the rear pin and the
front pin.
Removing the glides
1 - Locate the two spring clips at the front and
back of the glide.
2 - Gently pull down the front spring clip.
3 - Pull the glide away from the oven side - be
careful not to strain the clip.
4 - Repeat steps 2 - 3 on rear spring clip to remove glide.
/ Keeping your Bertazzoni clean
Burn hazard
Cleaning the broiler pan
Make sure the heating elements are turned off
and allowed to cool completely before any cleaning and/or maintenance operation.
Clean with detergent and hot water. For stubborn
spots, use a soap-filled steel wool pad.
The porcelain enamel finish is acid resistant, but
not acid proof. Acidic foods, such as citrus juices, tomatoes, rhubarb, vinegar, alcohol or milk,
should be wiped up and not allowed to bake onto
the porcelain during the next use.
Things to avoid:
• Do not use a steam cleaner to clean the range:
the steam could reach electrical components
and cause a short.
Do not spray liquids such as cleaning agents
into the openings on the bottom and top of the
All surfaces can discolor or be damaged if unsuitable cleaning agents are used. The front
of the oven, in particular, will be damaged by
oven cleaners and descalers. All surfaces are
susceptible to scratching. Scratches on glass
surfaces may cause a breakage. Immediately
remove any residues by using suitable cleaning
The heating elements in the oven do not require cleaning. The elements burn off any residue
when the oven is in use.
Cleaning stainless steel
All stainless steel parts should be wiped with hot
water and soap solution at the end of each cycle.
Wipe up spills and boilovers immediately. Use suitable, non-abrasive stainless cleaning products
when water and soap solution will not do the job.
DO NOT use steel wool, abrasive cloths, cleansers, or powders. If necessary, scrape stainless
steel to remove encrusted materials, soak the
area with hot towels to soften the residue, then
use a wooden or nylon spatula or scraper. DO
NOT use a metal knife, spatula, or any other metal tool to scrape stainless steel. DO NOT permit
citrus or tomato juice to remain on stainless steel surface, as citric acid will permanently discolor
stainless steel.
Cleaning the induction cooktop
Allow the glass to cool down until the residual heat
indicator is off before cleaning. Never use scouring
powders or paste, metal scourers, oven cleaners
or any abrasive cleaning products on the hotplate.
Clean spillovers before using the cooktop again.
For light cleaning, wipe with a soft cloth, warm
water and dishwashing liquid. For a streak free finish, polish dry with an microfibre cloth. For more
stubborn marks and to condition the surface, use
a good quality cooktop cleaner/conditioner, following the manufacturer’s instructions. For spillages with high sugar content such as jam, or the
accidental melting of plastic or alloy materials,
turn off the heating zone and remove the spillage
Use caution because the heating area maybe
very hot.
Cleaning the oven cavity
• Always allow the oven interior to cool before
• Do not allow vinegar, wine, coffee, milk, salt wa•
Cleaning painted surfaces
Clean with a sott cloth, warm water and non-abrasive dishwashing liquid. Whilst still damp, polish
dry with a clean soft cloth.
Cleaning glass surfaces
Clean with cleaning detergent and warm water.
Glass cleaner can be used to remove fingerprints.
If using glass cleaner ammonia,make sure that it
does not drip on exterior door surface.
ter or fruit juices to remain in contact with enamelled surfaces for prolonged periods as they
may stain or discolour the surface.
Never use sharp utensils to remove stains as
this could scratch the surface.
Never use steam cleaners on the oven interiors
as steam may damage electronic parts.
For light cleaning, wipe with a soft cloth, using
warm water and washing up liquid. For heavier residues, use a cream cleaner and a nylon
Oven cleaning products can be used according
to the manufacturer’s directions but care should
be taken that they do not come in contact with
any stainless steel, chrome, painted or alloy
parts of the range or the door seals and elements.
Cleaning oven racks and supports
Clean with detergent and hot water. Stubborn
spots can be scoured with a soap-filled steel wool
/ Simple maintenance
These simple tasks can be performed by the
owner. For any other maintainance task, we recommend employing a trained service technician.
Please call our toll free line to identify service technicians in your area:
ENGLISH 866 905 0010
FRANCAIS 800 561 7265
Warning! Electric shock hazard!
Disconnect the electric power at the main fuse
or circuit breaker before replacing bulb. DO NOT
touch bulb with bare hands. Clean off any signs of
oil from the bulb and handle with a soft cloth.
Side oven light
Bulb type: halogen G9 120 V, 40 W
Make sure the heating elements are turned off
and allowed to cool completely. Disconnect the
appliance from the power supply. Remove the
oven rack if it interferes with the light housing.
Slide the tip of a flat screw driver between the
glass cover and the lamp housing. Gently twist
the screw driver tip to loosen the glass lens cover, holding it in place with your fingers to prevent it from falling and breaking.
Remove the glass lens cover and then remove
the halogen bulb.
Place a new halogen bulb in its slot. DO NOT
touch bulb with bare hands.
Press the glass cover back into place and replace the oven rack.
Reconnect the oven to the electrical supply.
Top oven light
Bulb type: halogen G9 120 V, 40 W
Make sure the heating elements are turned off
and allowed to cool completely. Disconnect the
appliance from the power supply.
Unscrew the glass cover and remove the halogen bulb.
Place a new halogen bulb in its slot. DO NOT
touch bulb with bare hands
Screw the glass cover back in place.
Reconnect the oven to the electrical supply.
/ Simple maintenance
The inner glass door panels can be easily removed for cleaning. It is not necessary to remove the
door in order to clean the glass panes. The glass
can be cleaned in situ or removed.
Open the oven door to its fully extended position.
Flip down hinge clip on each hinge to secure
the door in an open position. A screwdriver may
be necessary to carefully pry the clip back
Slide the clips towards the centre of the door.
Holding the glass pane, lift slightly and pull
towards the oven to release the glass panel.
If the hinges are not locked properly and the
inner glass is removed, the door can close by
itself causing personal injuries.
/ Troubleshooting
Here are answer to common problems you
may experience. You are also welcome to call
our toll free Customer Service line to troubleshoot any issue with your Bertazzoni:
Condensation forms in the oven
ENGLISH 866 905 0010
FRANCAIS 800 561 7265
Smoke is generated in the oven
The oven will not operate
Is there power to the range? Check the switch
fuse or circuit breaker.
The oven does not heat
Check that the showroom function is not activared.
The control knob are getting too hot
Are you cooking with the oven door open?
Keep the oven door shut when not in use or when
A control knob is loose on its shaft
Have you pre-heated the oven?
Condensation is less likely to form when the oven
or grill is pre-heated before use.
Have you selected the right cooking temperature?
Are you cooking food with high fat? Do you rarely
use the grill? Have you cooked fat under the grill?
Does the oven interior need to be cleaned?
Remember to reduce the oven temperature by
70°F (20°C) if using a fan function with a recipe
designed for conventional cooking. Use high-sided dishes to contain fats and splashes. Leave
the grill on for a few minutes after grilling or roasting to burn off fat deposits from the oven roof.
Oven surfaces should be cleaned regularly to prevent build-up of cooking residues.
Please kindly register on our web site to validate your new product
warranty and help us to assist you better in case
of any inconvenience.
The knob retaining spring clip may have been
damaged. Call our service department for advice
and a replacement if necessary.
Food is cooking too quickly
Are you using a convection mode?
When using a fan-assisted oven cooking mode,
it is recommended to reduce the cooking temperature by 70°F (20°C) compared to conventional
Food is not cooking evenly
Are you cooking large amount of food or are you
using large bakeware?
Air needs to circulate through the oven for even
cooking. Remove the grill pan from the oven when
not in use and always allow a gap on all four sides
of dishes. You may need to turn your bakeware
during the cooking cycle. Oversized baking sheets, roasting pans and cakeware will act as a baffle and prevent hot air from moving evenly around
the cavity. Choose cooking equipment that allows
a minimum of 1 inch ( 2,5 cm) space on all sides to
allow the free movement of heat inside the cavity.
Grilling in the oven is slow
Have you selected the correct function?
/ Two year limited warranty
The warranties provided by Bertazzoni Spa in this
statement apply exclusively to Bertazzoni appliances and accessories sold as new products to the
original owner by a Bertazzoni authorized distributor, retailer, dealer or service center and installed
in the United States and Canada. The warranties
provided in this statement are not transferable
and have validity from the date of installation.
Coverage information
Bertazzoni SpA will repair or replace any component part which fails or proves defective due to
materials and/or workmanship within 2 years from
the date of installation and under conditions of
normal residential use. Repair or replacement will
be free of charge, including labor at standard rates and shipping expenses. Repair service must
be performed by a Bertazzoni Authorized Service
Center during normal working hours.
Cosmetic warranty
Bertazzoni will cover parts showing cosmetic defects in material and workmanship for a period
of thirty (30) days from date of installation of the
unit. This coverage will include scratches, stains,
surface imperfections on stainless steel, paint and
porcelain, with the exclusion of slight differences
in color due to materials and painting/enamelling
Exclusions are labor costs, B stock items, outof-box appliances and display units.
How to obtain service
To obtain warranty service please contact Bertazzoni Customer Service at the numbers below and
provide model number, serial number and date of
ENGLISH 866 905 0010
FRANCAIS 800 561 7265
Save proof of original purchase or of original installation to establish warranty period. Copy of the
product serial tag is affixed to the back cover of
the instruction manual.
What is not covered
The product used in any commercial application
Repair service provided by other than a Bertazzoni authorized service agency.
Damage or repair service to correct service provided by an unauthorized agency or the use of
unauthorized parts.
Installation not in accordance with local electrical
codes or plumbing codes.
Defects or damage due to improper storage of the
Defects or damage or missing parts on products
sold out of the original factory packaging or from
Service calls or repairs to correct the installation
of the product and/or related accessories.
Service calls to connect, convert or otherwise repair the electrical wiring and/or gas line to properly
use the product.
Service calls to provide instructions on the use of
a Bertazzoni product.
Repair service due to product usage in manner
other than what is normal and customary for home
Replacement of wear and tear parts
Replacement of glasses and light bulbs if they are
claimed to have failed later than 30 days after installation and in no case later than 4 months after
date of purchase
Defects and damages arising from accident, alteration, misuse, abuse, improper installation.
Defects and damages arising from transportation
of the product to the home of the owner.
Defects and damage arising from external forces
beyond the control of Bertazzoni SpA such as fire,
flood, earthquakes and other acts of God.
In case the product will be installed in a remote area, where certified trained technicians
are not reasonably available, the customer will
be responsible for the transportation costs for
the delivery of the product to the nearest authorized service center or for the displacement
costs of a certified trained technician.
Bertazzoni does not assume any responsibility for incidental or consequential damages.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to
you. This warranty gives you specific legal rights
and you may also have other rights which may
vary from state to state or province to province.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF