GE Profile | PW9000SFSS | Specs | GE Profile PW9000SFSS Specs

GE Profile PW9000SFSS Specs
PW9000DF
23-1/2" min.
Locate electrical
outlet in adjacent
cabinet 16" from
left side or 42"
from right side
GE Profile Series 30" Warming Drawer
™
Dimensions and Installation Information (in inches)
Optional Accessories: ZXD30B –1/4” panel kit
capability.
A
23-1/4"
Note: Custom panel will not be flush with adjacent
cabinetry drawers and doors.
10-1/2"
23-1/4"
23-1/4"
Undercounter Installation: A solid barrier must
be installed at least 1” from the lowest point of the
bottom of cooktop burner box to the10-1/2"
top
of the
B
10-1/2"
cutout. Use any solid material such
as 1/4”-thick
plywood. Allow at least 1/4” air gap between the
barrier and the top of the warming drawer. See B
label on top of the warming drawer for approved
B
cooktop models.
Under Oven Installation: Additional clearance
between cutouts may be required. Check to be
sure that oven supports above the warming
drawer location do not obstruct the required
interior 23-1/2” depth and 9-1/4” height.
Locate electrical
outlet in adjacent
Warming Drawer Dimensions
cabinet 16" from
left side or 42"
from right side
A
9-1/4"
A
24" A
recommended
9-1/4"
from floor 9-1/4"
9-1/4"
for under
24"
countertop
recommended
installation
23-1/4"
10-1/2"
from floor
for under
countertop
installation
B
9"
2x4 or 2x2
runners or solid9"
bottom
Door handle protrudes 2-3/4” from door face.
Cabinets and drawers on adjacent 45° and 90°
2x4 or 2x2
walls should be placed to avoid interference with(Must Support
runners
or solid
150 lbs.)
bottom
the handle.
KW Rating
120V
.45
Breaker Size
120V
15 Amps
27" Drawer
25-1/2"
27" Drawer
30" Drawer
2x4 or 2x2
anti-tip
block 9"
from floor
to bottom
B
of block
(Must Support 150 lbs.)
bottom
B25-1/2"
26-3/4"
26-3/4"
(Must Support 150
A lbs.) B
A
27" Drawer
25-1/2"
26-3/4"
28-1/2"
30" Drawer 28-1/2"
30" Drawer
28-1/2"
30" Drawer
Install
2x4 or 2x2
anti-tip
block 9"
from floor
to bottom
of block
from2x4
floor
or 2x2
to runners
bottomor solidInstall
bottom
of block
(Must Support 150 lbs.)
Installation Information: Before installing, consult
9"
installation instructions packed
with
product
for
Dimensions (in inches)
Dimensions (in inches)
­current dimensional data.
2x4 or 2x2
Dimensions (in inches)
A
A
B
runners
or solid
29-3/4"
29-3/4"
29-3/4"
28-1/2"
Dimensions (in inches)
25-1/2"
Locate electrical
outlet in adjacent
cabinet 16" from
left side or 42"
from right side
cutout
29-3/4"
Oven
cutout
Allow 5/8" 2" min.
overlap on
all sides
Oven 9"
cutout
9-1/4"
2" min.
9"
Allow 5/8"
overlap on Allow 5/8"
overlap on
all sides
24"
24"
recommended
recommended
from
floor
for under
from floor
countertop
installation
for under
Oven
cutout
2x2
or 2x4
against
rear
wall 9"anti-tip
from block
against rear
floor towall
bottom
9" from
of block
floor to bottom
9"
9-1/4"Allow 5/8"
of block
9-1/4"
overlap on
all sides
all sides
A
1" min. above toekick
or
A adjust to oven
installation height
A
1" min. toekick
above toekick
1" min. above
or adjustortoadjust
ovento oven
installation
installation
height height
A
Undercounter Installation
1-1/2"
Cabinet top
Electrical outlet
Install a solid
barrierside
right
7
below a cooktop
Install a solidflush
barrier
25"
1" Min.*
9-1/4"
Install 2x4
2x2 wall 9" from
rearor
cabinet
with 7side of floor
to bottom
of block
anti-tip
blocktoagainst
floor
bottom of block
cabinet 7" max.
rear cabinet wall 9" from
7
9
floor
9 to bottom of block
below a cooktop
1" Min.* 36" Install a solid1"barrier
Min.*
below a cooktop
Countertop
9-1/4"
9-1/4" height
36"
Countertop
height
Install 2x4 or 2x2
Electrical outlet
1-1/2"
right side
Installagainst
2x4 or 2x2
flush withanti-tip
side of block
Cabinet
topmax. fromcabinet 7" max.
42"
Electrical outlet
anti-tip
block
against
25"
wall
9" from
cabinet 7"rear
max.cabinet
25"
1-1/2"
Cabinet top
36"
Countertop
height
Electrical outlet
42" max. from Electrical
Electrical
outlet
outlet
right side
42"
max.with
fromside of
flush
A
A
9
A
Solid barrier
Electrical
Solid barrier
Solid barrier
1/4" Air gap
1-1/2"
Cabinet top
1/4" Air gap
Electrical outlet 16" max.
Electrical
outlet
outlet
16" max.
from left side
from
side from
42"leftmax.
Electrical
outlet 16" max.
right
23-1/2
" side
min.
from
leftside
25"
Install
a solid barrier
23-1/2" min.
1/4"
Air gap
below a cooktop
23-1/2
Install" min.
a solid barrier
below a cooktop
Install a solid barrier
below a cooktop
26-3/4"
2x2 or 2x4
anti-tip block
against rear
wall 9" from
floor
2x2 to
or bottom
2x4
ofanti-tip
block
2"
min.block
2" min.
Install a solid barrier
below a cooktop
For answers to your Monogram® or GE®
A our website at B
appliance questions, visit
geappliances.com or call GE Answer Center®
service, 800.626.2000.
27" Drawer
Locate electricalUnder Oven Installation
outlet in adjacent
23-1/2" min.
cabinet 16" from
left side or 42"
23-1/2" min.
from right side
Oven
countertop
installation
Install
2x4 or 2x2
anti-tip
block 9" Install
2x4 or 2x2
from floor
anti-tip 9"
to bottom
of block block 9"
23-1/2" min.
36"
Countertop
height
1" Min.*
9-1/4"
Specification Created 2/13
A
Electrical out
flush with sid
cabinet 7" m
7
Listed by
Underwriters
Laboratories
Solid barrier
221131
1/4" Air gap
PW9000DF
GE Profile™ Series 30" Warming Drawer
Features and Benefits
•Variable temperature control - Provides a variety of temperatures
•Variable humidity control - Customized warming from crisp to moist
•Frameless drawer front - Offers a smooth appearance
•“On” indicator light - Illuminates when warming drawer is operating
•Half rack - Maximizes drawer space
• Model PW9000DFBB - Black on black
PW9000DFBB
Specification Created 2/13
221131
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising