Thermador | PRL364JDG | Download Product Specs | Thermador PRL364JDG Download Product Specs

PRL364JDG
36-INCH GAS PRO GRAND® RANGE WITH
GRIDDLE (LP)
PROFESSIONAL SERIES, COMMERCIAL-DEPTH, PORCELAIN COOKTOP SURFACE
GENERAL PROPERTIES
Oven Capacity
5.5 cu. ft.
Cooking Modes - Main / Large Cavity
Bake, Convection Bake, Broil, Roast, Self Clean, Proof
Cooking Modes - Small Cavity
N/A
Programs
Heating-up Control, Meat Probe, Sabbath Function
Cleaning Type
Self Clean
Type of Grate
Continuous Cast Iron
Controls
Metal Knobs and LCD
Display
Warming Drawer
No
Sealed Burners
Yes
OVEN PERFORMANCE
Also Available:
PRG364JDG - Natural Gas
Bake Power
25,000 BTU (LP)
Broil Power
17,000 BTU (LP)
Convection Power
N/A
BURNER PERFORMANCE
FEATURES & BENEFITS
Total Number of Cooktop Burners
4 + Griddle
Total Cooktop BTU
88,000 (LP)
Power of Front Left Burner BTU
15,000-3,000 XLO (LP)
- Powerful 18,000 BTU (LP) burner (front right)
Power of Back Left Burner BTU
15,000-3,000 XLO (LP)
- Precision simmering capabilities as low as 100°F (375 BTU)
with 4 ExtraLow® Simmer burners
Power of Back Center Burner BTU
N/A
Power of Front Center Burner BTU
N/A
Power of Center 12" Electric Griddle (W)
1,630 W
Power of Center 12" Electric Grill (W)
N/A
Power of Far Right 12" Electric Griddle (W)
N/A
- Patented Pedestal Star® Burner with QuickClean Base®
designed for easy surface cleaning and superior heat spread
for any size pan
- SoftClose® hinges for ultra smooth closing of the oven door
- Superfast 2-hour self-clean mode–fastest in the industry
TECHNICAL DETAILS
Power of Back Right Burner BTU
15,000-3,000 XLO (LP)
Circuit Breaker (A)
20 A
Power of Front Right Burner BTU
18,000-3,000 XLO (LP)
Volts (V)
120 V
DIMENSIONS & WEIGHT
Frequency (Hz)
60 Hz
Overall Appliance Dimensions (HxWxD) (in)
Plug Type
120V-3 Prong
35 7/8"–36 3/4" x
35 15/16" x 28 1/2"
Power Cord Length (in)
96"
Required Cutout Size (HxWxD) (in)
Energy Source
Gas
35 7/8"–36 3/4" x 36" x
24"–25 1/8"
Adjustable Range Height (in.)
7/8"
Gas Type
Liquid Gas 27, 5 mbar
(USA)
Net Weight (lbs)
360 lbs
Alternative Gas Type
Natural Gas 15 mbar
(USA)
SEE PAGE 2 FOR OPTIONAL ACCESSORIES
ACCESSORIES (INCLUDED)
3 X Telescopic Rack, 1 X Temperature Sensor, 1 X Island Trim, 1 X Grill
Plate, 1 X Broiler Pan
WARRANTY
Limited Warranty, Entire Appliance,
Parts and Labor
T
HERMADOR EXCLUSIVE
Page 1 of 5
2 Year
PRL364JDG
36-INCH GAS PRO GRAND® RANGE WITH
GRIDDLE (LP)
PROFESSIONAL SERIES, COMMERCIAL-DEPTH, PORCELAIN COOKTOP SURFACE
ACCESSORIES (OPTIONAL)
PA12GRILLN
Pro Grill
PAGRIDDLEN
Griddle for Indoor
Electric Grill
PAGRIDDLE
Griddle
PA12CVRJ
12" Pro Grill / Griddle Cover
PA12CHPBLK
12" Cutting Board
PWOKRINGHC
Wok Ring
PA36JLBG
9" Low Backguard
PA36JTKG
Toekick
PAKNOBLUNG
Blue Knob Pro Grand Kit
36-INCH RANGE AND CUTOUT DIMENSIONS
Page 2 of 5
PRL364JDG
36-INCH GAS PRO GRAND® RANGE WITH
GRIDDLE (LP)
PROFESSIONAL SERIES, COMMERCIAL-DEPTH, PORCELAIN COOKTOP SURFACE
36-INCH RANGE CUTOUT DIMENSIONS
as defined
defined ininthe
“National
FuelFuel
Gas Code”
(ANSI Z223.1,
as
the
“National
Gas Code”
(ANSI Z223.1,
Current Edition).
Clearances
fromfrom
non-combustible
materialsmaterials
Current
Edition).
Clearances
non-combustible
are not part of the ANSI Z21.1 scope and are not certified by
are not part of the ANSI Z21.1 scope and are not certified by
CSA. Clearances of less than 12” (305 mm) must be approved
CSA.
of lessby
than
12” (305
mm)having
must be approved
by theClearances
local codes and/or
the local
authority
by
the
local
codes
and/or
by
the
local
authority
having
jurisdiction.
jurisdiction.
Page 3 of 5
PRL364JDG
36-INCH GAS PRO GRAND® RANGE WITH
GRIDDLE (LP)
PROFESSIONAL SERIES, COMMERCIAL-DEPTH, PORCELAIN COOKTOP SURFACE
Installation Clearances with Low Backguard
36-INCH RANGE DIMENSIONS AND CLEARANCE REQUIREMENTS WITH “LOW BACK”
NOTE: A 36-inch
minimum clearance is
required between the top
of the cooking surface
and the bottom of an
unprotected cabinet. A
30-inch clearance can be
used when the bottom
of the wood or metal
cabinet is protected by
not less than 1/4 inch of a
flame retardant material
covered with not less
than No. 28 MSG sheet
steel, 0.015 inch (0.4 mm)
thick stainless steel, 0.024
inch (0.6 mm) aluminum,
or 0.020 inch (0.5 mm)
thick copper.
Combustible
Materials
36" (914 mm) min.
to combustible
materials
31¼" (794 mm)
291/8" (740 mm)
9" (229 mm)
Lowback
25 /8" (638 mm)
max. recess depth
1
35 7/8" (911 mm) Min.
36¾" (933 mm) Max.
26 7/8" (683 mm)
48¾" (1238 mm)
As defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition).
Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 12" (305 mm)
must be approved by the local codes and/or by the local authority having jurisdiction.
Page 4 of 5
Combustible
Back Wall
PRL364JDG
36-INCH GAS PRO GRAND® RANGE WITH
GRIDDLE (LP)
PROFESSIONAL SERIES, COMMERCIAL-DEPTH, PORCELAIN COOKTOP SURFACE
Installation Clearances with Flush Island Trim
36-INCH RANGE DIMENSIONS AND CLEARANCE REQUIREMENTS WITH “FLUSH ISLAND TRIM”
Combustible
Materials
36" (914 mm) min.
to combustible
materials
12" (305 mm) min. to
12”
combustible surface
with Flush Island Trim
31¼" (794 mm)
291/8" (740 mm)
Shaded area behind
range indicates
minimum clearance
to combustible surfaces,
combustible materials
cannot be located within
this area.
For Flush Island Trim
installations, counter
surface should have
a cantilever edge
meeting the back
section of the Flush
Island Trim accessory.
Combustible
Back Wall
35 7/8" (911 mm) Min.
36¾" (933 mm) Max.
251/8" (638 mm)
max. recess depth
If an inner wall
is used under the
cantilever counter
top, there should be a
1/8" (3 mm) gap from
the rear of the range
to the inner wall.
26 7/8" (683 mm)
48¾" (1238 mm)
As defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition).
Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 12" (305 mm)
must be approved by the local codes and/or by the local authority having jurisdiction.
These warranties give you specific legal rights and you may have other rights that vary from state to state. Full warranty and limited warranty from date of installation. For complete warranty
details, refer to your Use & Care manual, or ask your dealer.
Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation
engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model
number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada.
Thermador is not responsible for products that are transported from the U.S. for use in Canada.
1 800 735 4328 | USA THERMADOR.COM | CANADA THERMADOR.CA | ©2015 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED.
Page 5 of 5
04 / 15
Download PDF

advertising